This patch sets max freq defaults for ddr2 and ddr3for fam10.
[coreboot.git] / src / mainboard / amd /
2011-05-20 Scott DuplichanCorrect amd persimmon romstage code for early SPI prefe...
2011-05-20 Scott DuplichanMove the ACPI FACP table to the front of the RSDT list...
2011-05-15 Marc JonesRemove multiple mmconf settings and just use kconfig...
2011-05-15 Scott DuplichanCosmetic cleanup.
2011-05-15 Scott Duplichan1) Remove unused kconfig options.
2011-05-15 Scott DuplichanUpdate gpp port configuration.
2011-05-15 Scott DuplichanEnable rom cache early to reduce boot time.
2011-05-15 Scott DuplichanFix memory allocation problem in amdInitLate. Disabled...
2011-05-15 Scott DuplichanRemove some non-essential agesa options to reduce boot...
2011-05-15 Scott DuplichanDeclare legacy video frame buffer so that Windows gener...
2011-05-15 Scott DuplichanDeclare RTC as not PIIX4 compatible to match AMD hardware.
2011-05-15 Scott DuplichanMake fadt revision match its length. Solves Windows...
2011-05-15 Scott DuplichanEnable SPI cacheline prefetch early to reduce boot...
2011-05-15 Scott DuplichanEnable SPI cacheline prefetch early to reduce boot...
2011-05-15 Scott DuplichanSwitch processor cores to pstate 0 early to reduce...
2011-05-15 Scott DuplichanEnable 33 MHz fast mode SPI read early to reduce boot...
2011-05-15 Scott DuplichanMove mmconf base from e0000000 to f8000000 to avoid...
2011-05-15 Scott DuplichanMatch DIMM SPD addressing to implemented slots.
2011-05-15 Scott DuplichanSize mmconf according to CONFIG_MMCONF_BUS_NUMBER.
2011-05-15 Scott Duplichan1) Use D18F1xF4 VGA Enable to simplify legacy video...
2011-05-15 Scott Duplichan1) Set I/O APIC ID according to BKDG recommendation
2011-04-20 Stefan Reinauerrun uart_init() from console_init, just like the other...
2011-04-18 Stefan Reinauer* Set USBDEBUG_DEFAULT_PORT in all southbridges and...
2011-04-11 Alexandru GagniucUnify use of post_code
2011-04-10 Stefan ReinauerIn 2007 Adrian Reber suggested that we drop ASSEMBLY...
2011-03-28 Zheng BaoSP5100's code is based on SB700. Change the legacy...
2011-03-08 Scott DuplichanEnable mahogany_fam10 and Kino family 10h to run the...
2011-03-04 Patrick GeorgiRedo r6099 after copy&pasted code reintroduced DIMMx...
2011-03-01 Sven SchnelleUse subsystem id from devicetree.cb instead of Kconfig...
2011-02-26 Xavi Drudis FerranMake AMD Fam10h CPU microcode updates optional in Exper...
2011-02-15 Marc JonesRemove Inagua Kconfig items for external VGA and AHCI...
2011-02-14 Patrick GeorgiFix Typo. (and why is that file, and some of its siblin...
2011-02-14 Frank VibransAdd IBASE DB-FT1 and AMD Inagua motherboards. Patch...
2011-01-21 Zheng BaoNow bimini can boot linux to login.
2011-01-20 Zheng BaoRemove the code for debugging.
2011-01-20 Zheng BaoFeatures of Bimini board:
2011-01-18 Zheng Baoremove the code which is not ready to release.
2011-01-18 Zheng Baoremove the code which is not ready to release.
2011-01-04 Kerry SheTrivial: use the IO_APIC_ADDR constant defined in ioapi...
2011-01-01 Uwe HermannAMD SB800: Drop component prefix from filenames.
2011-01-01 Uwe HermannAMD Bimini: Use mptable_init() in mptable.c.
2011-01-01 Uwe HermannAMD Bimini: Small fixes, and updates to recent trunk...
2011-01-01 Uwe HermannAMD Bimini: Drop duplicate ASL files as we did for...
2011-01-01 Kerry SheAdd support for the AMD Bimini eval mainboard.
2010-12-29 Nils Jacobs-Change the remaining GLIU1 port 5 register names from...
2010-12-17 Stefan Reinauerdrop one more version of doing serial uart output diffe...
2010-12-16 Uwe HermannGet mptable OEM/product ID from kconfig variables.
2010-12-11 Rudolf MarekFollowing patch makes just one fadt.c file. For SB700.
2010-12-11 Stefan ReinauerAfter this has been brought up many times before, renam...
2010-12-10 Uwe HermannAdd TINY_BOOTBLOCK support for AMD SB700.
2010-12-09 Uwe HermannDeduplicate various ACPI .asl files.
2010-12-08 Uwe HermannMove "select CACHE_AS_RAM" lines from boards into CPU...
2010-12-08 stepansecond round name simplification. drop the <component...
2010-12-08 stepanfirst round name simplification. drop the <component...
2010-12-07 Uwe HermannGet rid of some unneeded function prototypes in romstag...
2010-12-07 Zheng BaoTrivial. Fix typo.
2010-12-06 Uwe HermannDrop unused/obsolete CONFIG_COMPRESS from a few board...
2010-11-26 Uwe HermannAMD-8111: Add TINY_BOOTBLOCK support.
2010-11-22 Uwe HermannDrop per-board ram_check() calls for now.
2010-11-22 Patrick GeorgiFinal set of smp_write_bus -> mptable_write_buses changes.
2010-11-21 Uwe HermannSimplify a few code chunks, fix whitespace and indentation.
2010-11-21 Uwe HermannDrop excessive whitespace randomly sprinkled in romstag...
2010-11-21 Patrick GeorgiConvert boards to use mptable_write_buses.
2010-11-21 Uwe HermannUse DIMM0 et al in lots more places instead of hardocdi...
2010-11-20 Uwe HermannMerge all spd_addr.h into the resp. romstage.c files.
2010-11-20 Uwe HermannSome more DIMM0 related cleanups and deduplication.
2010-11-20 Patrick GeorgiUnify DIMM SPD addressing. For Geode, change the
2010-11-18 Uwe HermannFix/drop some obsolete comments,
2010-11-18 Patrick GeorgiEliminate SET_NB_CFG_54 option. There was no board...
2010-11-17 Tobias DiedrichThis problem was introduced with
2010-11-16 Patrick GeorgiMove the SET_FIDVID* family of configuration options...
2010-11-07 Scott DuplichanDSDT.asl should not report the AMD SB600/SB700 RTC...
2010-11-07 Patrick GeorgiMove K8_ALLOCATE_IO_RANGE to Kconfig.
2010-11-06 Uwe HermannRemove comments that are obsolete since r6028.
2010-11-05 Patrick GeorgiMove QRANK_DIMM_SUPPORT to Kconfig, removing it from...
2010-11-05 Uwe HermannVarious PIRQ/MPTABLE/ACPI Kconfig fixes.
2010-11-05 Nils JacobsAdd Kconfig CPU speed selection to Geode GX2 boards.
2010-11-05 Nils JacobsGX2: Define the unused DIMM1 to 0xFF to make it obvious...
2010-11-01 Nils JacobsChange Geode GX2 to use the auto DRAM detect code from...
2010-10-31 Uwe HermannRemove definitions of ACPI_SSDTX_NUM to 0, that's the...
2010-10-26 Tobias DiedrichWe need to call smp_write_lintsrc() instead of smp_writ...
2010-10-25 Uwe HermannFactor out common mptable code to mptable_init().
2010-10-24 Scott DuplichanRunning a checked build of Windows is needed for unders...
2010-10-13 Peter StugeEnable or disable the power button in Kconfig
2010-10-12 Uwe HermannWe define IO_APIC_ADDR in <arch/ioapic.h>, let's use it.
2010-10-07 Jonathan KollaschRemove duplicate line from pci_ids.h.
2010-10-05 Patrick Georgi- move EHCI_BAR_INDEX to ehci.h - it's constant as...
2010-10-05 Patrick GeorgiRemove lib/ramtest.c-include from all CAR boards.
2010-10-02 Uwe HermannAllow selecting the physical USB Debug Port on AMD...
2010-10-01 Patrick GeorgiMove CACHE_AS_RAM_ADDRESS_DEBUG out of romstage.c into...
2010-10-01 Patrick GeorgiICS951462_ADDRESS defined but _never_ used. Drop it.
2010-09-30 Patrick GeorgiRename build system variables to be more intuitive...
2010-09-30 Stefan Reinauerfix Kontron KT690 and clean up socket S1G1 boards accor...
2010-09-28 Myles WatsonRemove redundant HW_MEM_HOLE_SIZEK and HW_MEM_HOLE_SIZE...
2010-09-27 Warren TurkalI missed these boards in a previous commit.
2010-09-27 Warren TurkalAll these boards already had the CACHE_AS_RAM option...
2010-09-25 Uwe HermannDrop some useless "../../../" in #includes (trivial).
2010-09-25 Stefan Reinauer- Fix race condition in option_table.h generation by...
2010-09-24 Uwe HermannHook up all AMD SB600/SB700 boards to the EHCI Debug...
2010-09-21 Uwe HermannCut the crap.
next