libpayload: remove uhci_reg_maskX
[coreboot.git] / src / southbridge /
2011-12-21 Marc JonesPersimmon audio codec verb patch.
2011-12-06 Kyösti MälkkiFix AMD 8132 and 8151 southbridge builds
2011-12-05 Denis 'GNUtoo' CarikliRS780: print the vgainfo
2011-12-02 Florian Zumbiehlmake GPIOs and misc configurable via devicetree
2011-12-02 Florian Zumbiehlmake INT[EFGH]# of vt8237 configurable as gpio via...
2011-12-02 Florian Zumbiehlsome black magic for initializing the old version of...
2011-12-02 Florian Zumbiehlimplement usb2 termination and dpll delay setting for...
2011-12-02 Sven Schnellei3100: Add HAVE_HARD_RESET
2011-11-23 Florian Zumbiehlvt8237: add support for setting the power state after...
2011-11-10 Florian Zumbiehlcompile code for CONFIG_SOUTHBRIDGE_VIA_K8T800_OLD
2011-11-10 Florian Zumbiehlsupport for different location of HT registers in old...
2011-11-08 Stefan Reinauermove function from header file to .c file
2011-11-07 Florian Zumbiehlrename vt8237r_cfg() to k8x8xx_vt8237r_cfg() and make...
2011-11-07 Florian Zumbiehlfactor out common config for k8x8xx's dram_enable(...
2011-11-07 Florian Zumbiehladd support for 1106:3188 (host controller of the old...
2011-11-07 Florian Zumbiehlin vt8237r_enable(), write function enables only to...
2011-11-04 Patrick GeorgiRevert "add support for 1106:3188 (host controller...
2011-11-03 Florian Zumbiehladd support for writing to SMBus with vt8237
2011-11-03 Florian Zumbiehladd support for 1106:3188 (host controller of the old...
2011-11-01 Stefan Reinauerremove trailing whitespace
2011-10-31 Sven SchnelleFix usb debug dongle support
2011-10-30 Stefan ReinauerFix gcc 4.6.1 breakage of southbridge/amd/sr5650/pcie.c.
2011-10-28 Patrick GeorgiGet rid of the old romstage-as-bootblock ROM layout
2011-10-28 Patrick Georgisb600: Implement EHCI workaround
2011-10-27 Oskar EnokssonAdded smbus block read/write for amd8111
2011-10-27 Sven Schnellei82801gx: Fix port status in AHCI mode
2011-10-25 Sven Schnellei82801gx: Add setting for C4onC3 mode
2011-10-25 Sven Schnellei82801gx: Add write and read/write block functions
2011-10-23 Sven Schnellei82801gx: Don't set I/O base address to static value
2011-10-23 Kerry ShehSB800: Hide unused gpp ports
2011-10-21 Patrick Georgisch: strip quotes around cmc.bin filename
2011-10-19 Kyösti Mälkkii82801dx: Replace romstage printk's
2011-10-15 Stefan ReinauerAMD CPU and chipset fixes for compilation with gcc 4.6
2011-10-15 Stefan Reinaueruse acpi.h include instead of manually adding acpi_slp_...
2011-10-14 Stefan ReinauerFix AMD SB800 (cimx) southbridge code to compile with...
2011-10-13 Stefan ReinauerUse default table creator macro for all SSDTs
2011-10-13 Patrick Georgiamd/sb600: Enable COM2 at all times in early setup
2011-10-12 Kerry ShehSB800 RAID: add kconfig option RAID_MISC_ROM_POSITION
2011-10-12 Kerry ShehSB800: Sata Enable bus master and enable ahci for AHCI...
2011-10-12 Kerry Shehsb800: Add Kconfig option ENABLE_IDE_COMBINED_MODE
2011-10-11 Kerry Shehmainboard: complete the sb800 devicetree even device...
2011-10-11 Kerry Shehsb800: Add sata ahci/raid mode kconfig option
2011-09-20 Stefan ReinauerUse ACPI text fields consistently with all other boards
2011-09-14 efdesign98AMD SB800 early console use fix
2011-09-14 Kerry Shehrs780: hide unused gfx ports and gpp ports
2011-09-12 Tobias DiedrichAdd acpi_get_sleep_type() to i82371eb and P2B _PTS...
2011-09-06 Kerry SheAMD SB800 southbridge update
2011-09-06 Kerry SheAMD F14 southbridge update
2011-09-04 Wang Qing PeiAdjust some code/comment of sb700 sata init
2011-07-21 efdesign98Update AMD SR5650 and SB700
2011-07-14 Scott DuplichanMove AMD SB800 early clock setup.
2011-07-13 Marc JonesSet SB800 ROM decode size based on kconfig.
2011-06-30 Rudolf MarekImprove VIA K8M890 HT settings. Use recommended setting...
2011-06-29 Sven Schnellei82801gx: read RTC status register to prevent IRQ storm
2011-06-28 Kerry Sheamd southbirdge sb800 wrapper, pci bridge fix
2011-06-28 efdesign98Addition of Family12/SB900 wrapper code
2011-06-21 efdesign98Rename {CPU|NB|SB}/amd/*_wrapper folders
2011-06-20 Stefan Reinauersb800: move spi prefetch and fast read mode to sb bootb...
2011-06-19 Scott DuplichanASRock E350M1: Configure SB800 GPP ports to support...
2011-06-15 Sven SchnelleSMM: don't overwrite SMM memory on resume
2011-06-15 Sven Schnellei82801gx: replace cafed00d/cafebabe by defines
2011-06-10 Jonathan A. KollaschAdd ACPI automatic PIC/APIC interrupt routing logic...
2011-06-08 Marc JonesRevert changes to set the sb800 to AHCI mode.
2011-06-07 Sven Schnellei82801gx: enable ACPI during S3 resume
2011-06-07 Sven SchnelleSMM: add defines for APM_CNT register
2011-06-07 Stefan Reinauerre-indent, so files conform to coding guidelines.
2011-06-06 Sven SchnelleSMM: add mainboard_apm_cnt() callback
2011-06-04 Peter Stugevt8237r: Simplify bootblock init to work around nested...
2011-06-01 Kerry Shetrivial remove blanks at the end of line
2011-06-01 Kerry SheThis patch fix a AMD sb800 wrapper compile warning:
2011-05-23 Jonathan KollaschCorrect implementation of r6608.
2011-05-22 Jonathan KollaschEnsure ck804 romstrap is 16-byte aligned.
2011-05-16 Peter Stugecimx_wrapper/sb800: Fix indent in late.c:sb800_enable()
2011-05-15 Scott DuplichanUpdate gpp port configuration.
2011-05-15 Scott DuplichanProgram the I/O APIC ID.
2011-05-15 Scott DuplichanEnable AHCI mode and hide IDE controller to reduce...
2011-05-15 Scott DuplichanConfigure CIMx to use 33 MHz fast mode for SPD read.
2011-05-07 Kerry SheRS780 DDI Lanes configure support,
2011-05-07 Kerry SheSB800 CIMX code can share the AGESA V5 lib code,
2011-05-03 Sven Schnellei82801gx: enable SPI prefetching
2011-04-21 Stefan Reinauermore ifdef -> if fixes.
2011-04-21 Stefan Reinauermore ifdef -> if fixes
2011-04-21 Stefan Reinauersome ifdef --> if fixes
2011-04-20 Stefan Reinauerdrop dead code from sb800 bootblock
2011-04-20 Sven Schnellepci1x2x: remove latency/bridge control/cacheline size...
2011-04-20 Sven Schnellepci1x2x: use cardbus_read_resources()/cardbus_enable_re...
2011-04-20 Sven Schnellepci1x2x: use pci_ops set_subsystem instead of custom...
2011-04-20 Sven Schnellepci1x2x: add PCI1510 device IDs
2011-04-20 Sven Schnellepci1x2x: use devicetree register configuration
2011-04-20 Stefan Reinauerdrop dead uart init code.
2011-04-19 Idwer VolleringFix compilation of all i82371eb boards when ACPI tables...
2011-04-19 Stefan ReinauerFix some more misuses of ifdef/if defined
2011-04-18 Stefan Reinauer* Set USBDEBUG_DEFAULT_PORT in all southbridges and...
2011-04-14 Stefan Reinauerdrop incorrectly used CONFIG_ROM_IMAGE_SIZE and unused...
2011-04-14 Stefan Reinauernvidia mcp55: drop unused dbg_info
2011-04-14 Stefan Reinauercosmetic cleanup of sis966 usb2 code
2011-04-12 Marc JonesUse TOM2 for highest sysmem setting for northbound...
2011-04-11 Alexandru GagniucUnify use of post_code
2011-04-10 Stefan ReinauerIn 2007 Adrian Reber suggested that we drop ASSEMBLY...
2011-04-01 Sven SchnelleICH7: Fix register naming error
next