i82801dx: Replace romstage printk's

Patch is required to compile this with romcc.

Change-Id: I5c4c0f5b32e5edeb8c48d8455b3493ca79f8b452
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/291
Tested-by: build bot (Jenkins)
Reviewed-by: Peter Stuge <peter@stuge.se>

diff --git a/src/southbridge/intel/i82801dx/early_smbus.c b/src/southbridge/intel/i82801dx/early_smbus.c
index f58cd863427a46443af3de1642692ead3314d967..00eaee0f9ee740e94020ea8623d49a57339f22ba 100644 (file)
--- a/src/southbridge/intel/i82801dx/early_smbus.c
+++ b/src/southbridge/intel/i82801dx/early_smbus.c
@@ -41,7 +41,7 @@ static void enable_smbus(void)
 {
        device_t dev = PCI_DEV(0x0, 0x1f, 0x3);
 
-       printk(BIOS_DEBUG, "SMBus controller enabled\n");
+       print_debug("SMBus controller enabled\n");
        /* set smbus iobase */
        pci_write_config32(dev, 0x20, SMBUS_IO_BASE | 1);
        /* Set smbus enable */
@@ -117,9 +117,9 @@ static int smbus_read_byte(unsigned device, unsigned address)
        unsigned char global_status_register;
        unsigned char byte;
 
-       /* printk(BIOS_ERR, "smbus_read_byte\n"); */
+       /* print_err("smbus_read_byte\n"); */
        if (smbus_wait_until_ready() < 0) {
-               printk(BIOS_ERR, "SMBUS not ready (%02x)\n", -2);
+               print_err("SMBUS not ready (-2)\n");
                return -2;
        }
 
@@ -145,13 +145,13 @@ static int smbus_read_byte(unsigned device, unsigned address)
             SMBUS_IO_BASE + SMBHSTCTL);
        /* poll for it to start */
        if (smbus_wait_until_active() < 0) {
-               printk(BIOS_ERR, "SMBUS not active (%02x)\n", -4);
+               print_err("SMBUS not active (-4)\n");
                return -4;
        }
 
        /* poll for transaction completion */
        if (smbus_wait_until_done() < 0) {
-               printk(BIOS_ERR, "SMBUS not completed (%02x)\n", -3);
+               print_err("SMBUS not completed (-3)\n");
                return -3;
        }
 
@@ -161,10 +161,10 @@ static int smbus_read_byte(unsigned device, unsigned address)
        byte = inb(SMBUS_IO_BASE + SMBHSTDAT0);
 
        if (global_status_register != 2) {
-               //printk(BIOS_SPEW, "%s: no device (%02x, %02x)\n", __func__, device, address);
+               //print_spew("%s: no device (%02x, %02x)\n", __func__, device, address);
                return -1;
        }
-       //printk(BIOS_DEBUG, "%s: %02x@%02x = %02x\n", __func__, device, address, byte);
+       //print_debug("%s: %02x@%02x = %02x\n", __func__, device, address, byte);
        return byte;
 }