libpayload: fix wborder()
[coreboot.git] / src / northbridge /
2011-06-30 Rudolf MarekImprove VIA K8M890 HT settings. Use recommended setting...
2011-06-28 efdesign98Addition of Family12/SB900 wrapper code
2011-06-21 efdesign98Move existing AMD Ffamily14 code to f14 folder
2011-06-21 efdesign98Rename {CPU|NB|SB}/amd/*_wrapper folders
2011-06-15 Sven Schnellei945 GMA: restore tft brightness from cmos
2011-06-15 Sven Schnellei82801gx: replace cafed00d/cafebabe by defines
2011-06-03 Marc JonesThis patch sets max freq defaults for ddr2 and ddr3for...
2011-05-15 Peter Stugeagesa_wrapper: Avoid repetitive Kconfig depends, trivial
2011-05-15 Scott DuplichanCosmetic cleanup.
2011-05-15 Scott Duplichan1) Remove unused kconfig options.
2011-05-15 Scott DuplichanBuild device paths for AP cores so that coreboot will...
2011-05-15 Scott DuplichanMove mmconf base from e0000000 to f8000000 to avoid...
2011-05-11 Patrick GeorgiWork around unclean CMOS handling for now
2011-05-10 Patrick GeorgiChange read_option() to a macro that wraps some API...
2011-04-21 Stefan Reinauermore ifdef -> if fixes
2011-04-21 Stefan Reinauersome ifdef --> if fixes
2011-04-19 Zheng BaoThe "temp" will be used later. So it has to be calculat...
2011-04-19 Stefan Reinauercleanup wrong use of defined() after exporting all...
2011-04-14 Stefan Reinauerdrop incorrectly used CONFIG_ROM_IMAGE_SIZE and unused...
2011-04-11 Alexandru GagniucUnify use of post_code
2011-04-10 Sven Schnellei945: improve get_top_of_ram()
2011-03-28 Zheng BaoAdd AMD C32 support.
2011-03-08 Scott DuplichanEnable mahogany_fam10 and Kino family 10h to run the...
2011-03-01 Patrick GeorgiMark non-returning function as noreturn to help some...
2011-02-28 Xavi Drudis FerranImproving BKDG implementation of P-states,
2011-02-28 Xavi Drudis FerranImproving BKDG implementation of P-states,
2011-02-28 Xavi Drudis FerranImproving BKDG implementation of P-states,
2011-02-28 Xavi Drudis FerranImproving BKDG implementation of P-states,
2011-02-28 Xavi Drudis FerranImproving BKDG implementation of P-states,
2011-02-28 Xavi Drudis FerranImproving BKDG implementation of P-states,
2011-02-28 Xavi Drudis FerranImproving BKDG implementation of P-states,
2011-02-28 Xavi Drudis FerranImproving BKDG implementation of P-states,
2011-02-28 Xavi Drudis FerranImproving BKDG implementation of P-states,
2011-02-28 Xavi Drudis FerranImproving BKDG implementation of P-states,
2011-02-28 Xavi Drudis FerranImproving BKDG implementation of P-states,
2011-02-28 Xavi Drudis FerranImproving BKDG implementation of P-states,
2011-02-28 Xavi Drudis FerranImproving BKDG implementation of P-states,
2011-02-27 Xavi Drudis FerranAdd 300 MHz and 500 MHz HT frequency limits
2011-02-24 Josef KellermannAdd compile-time defaults to some K8 CMOS options in...
2011-02-21 Sven Schnelle[i945] Add SPD adress mapping
2011-02-14 Josef KellermannErrata #169 works on HT, not MC
2011-02-14 Frank VibransThis code provides cpu northbridge initialization for...
2011-02-10 Alexandru GagniucImplemented workaround for erratum 169, obsoleting...
2011-01-27 Peter StugeSMM code on i945 platforms needs udelay()
2011-01-20 Zheng BaoFor Cx, each ChipSel need to be sent MR command.
2011-01-19 Nils JacobsAdd a GX2 Kconfig option to choose the framebuffer...
2011-01-17 Zheng BaoThe code is tested on my board with register DIMMs...
2011-01-06 Zheng BaoFix some settings fo AMD MCT. It is based on BIOS test...
2010-12-30 Nils JacobsUse die() to assure the processor can't wake up from...
2010-12-29 Nils Jacobs-Change the remaining GLIU1 port 5 register names from...
2010-12-29 Stefan Reinauerfix i810 boards with ram init debugging disabled.
2010-12-27 Stefan Reinauerproper printk handling in src/northbridge/intel/i82810...
2010-12-27 Stefan Reinauer__PRE_RAM__ is defined by the makefile
2010-12-27 Stefan Reinauerdump_spd_registers() is only defined when ram init...
2010-12-27 Stefan ReinauerFix most CONFIG_DEBUG_RAM_SETUP issues.
2010-12-26 Nils JacobsMove Geode GX2 UMA video memory size to Kconfig
2010-12-26 Nils JacobsRemove dead and unused Geode GX2 code
2010-12-26 Nils JacobsReplace Geode GX2 MSR addresses for GLCP on GLIU1 with...
2010-12-26 Nils JacobsClean up Geode GX2 comments, whitespace and coding...
2010-12-23 Keith HuiFix build with CONFIG_DEBUG_RAM_SETUP on Intel 440BX...
2010-12-19 Stefan ReinauerThe same mechanisms are used for normal and fallback...
2010-12-18 Uwe HermannFix a few whitespace and coding style issues.
2010-12-18 Patrick GeorgiA couple of Poulsbo fixes:
2010-12-18 Patrick GeorgiSupport Intel SCH (Poulsbo) and add iwave/iWRainbowG6...
2010-12-17 Stefan Reinauerdrop one more version of doing serial uart output diffe...
2010-12-16 Stefan Reinauerfix according to coding guidelines
2010-12-13 Rudolf MarekAttached patch implements the memory speed reductions...
2010-12-13 Rudolf MarekFollowing patch adds support for suspend/resume functio...
2010-12-13 Rudolf MarekFollowing patch adds support to bring out the memory...
2010-12-13 Rudolf MarekWe hardcode highmemory size in every northbridge!...
2010-12-11 Stefan Reinauercatch some illegal configurations (trivial)
2010-12-11 Stefan ReinauerAfter this has been brought up many times before, renam...
2010-12-08 stepansecond round name simplification. drop the <component...
2010-12-07 Myles WatsonMove MMCONF resource into the domain for fam10 for...
2010-12-07 Uwe HermannGet rid of some unneeded function prototypes in romstag...
2010-12-02 Zheng BaoMore explicite and straight way to set seed.
2010-11-27 Tobias DiedrichAfter finding the missing bit poweroff works now.
2010-11-22 Rudolf Marek1) wraps the s3 parts of chipset code/memory init code...
2010-11-22 Uwe Hermanni855: Remove useless memctrl indirection.
2010-11-22 Stefan ReinauerPrinting coreboot debug messages on VGA console is...
2010-11-21 Uwe HermannSimplify a few code chunks, fix whitespace and indentation.
2010-11-21 Uwe HermannDrop excessive whitespace randomly sprinkled in romstag...
2010-11-20 Uwe HermannSome more DIMM0 related cleanups and deduplication.
2010-11-20 Patrick GeorgiUnify DIMM SPD addressing. For Geode, change the
2010-11-18 Uwe HermannFix/drop some obsolete comments,
2010-11-18 Patrick GeorgiMove DIMM_MAP_LOGICAL to Kconfig.
2010-11-17 Tobias DiedrichThis problem was introduced with
2010-11-15 Patrick GeorgiMove RCBA defines to northbridge (instead of mainboard)
2010-11-13 Scott DuplichanMTRR related improvements for AMD family 10h and family...
2010-11-10 Peter StugeMake amdk8 printk_raminit() accept just a single string...
2010-11-07 Patrick GeorgiMove K8_ALLOCATE_IO_RANGE to Kconfig.
2010-11-05 Patrick GeorgiMove QRANK_DIMM_SUPPORT to Kconfig, removing it from...
2010-11-05 Nils JacobsAdd Kconfig CPU speed selection to Geode GX2 boards.
2010-11-05 Nils JacobsRemove banner wrapper function and unify print(k) usage.
2010-11-03 Nils JacobsRemove some unused code from gx2/raminit.c.
2010-11-03 Nils JacobsClean up some comments and white space in gx2/northbrid...
2010-11-01 Nils JacobsChange Geode GX2 to use the auto DRAM detect code from...
2010-11-01 Nils JacobsRemove some unused code.
2010-11-01 Nils JacobsGX2: Clean up some white space and comments.
2010-11-01 Nils JacobsGX2: Change MSR register numbers into more descriptive...
next