The family10 code had a very slow decompress before the cache settings were
fixed. This has been fixed for some time. Remove all the old messages from the
serial stream.
Change-Id: I476efe1a430f702af394734f354ff69bd053f1d2
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/672
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
13 files changed:
sb7xx_51xx_before_pci_init();
post_code(0x42);
sb7xx_51xx_before_pci_init();
post_code(0x42);
- printk(BIOS_DEBUG, "\n*** Yes, the copy/decompress is taking a while, FIXME!\n");
post_cache_as_ram(); // BSP switch stack to ram, copy then execute LB.
post_code(0x43); // Should never see this post code.
}
post_cache_as_ram(); // BSP switch stack to ram, copy then execute LB.
post_code(0x43); // Should never see this post code.
}
// die("After MCT init before CAR disabled.");
post_code(0x42);
// die("After MCT init before CAR disabled.");
post_code(0x42);
- printk(BIOS_DEBUG, "\n*** Yes, the copy/decompress is taking a while, FIXME!\n");
post_cache_as_ram(); // BSP switch stack to ram, copy then execute LB.
post_code(0x43); // Should never see this post code.
}
post_cache_as_ram(); // BSP switch stack to ram, copy then execute LB.
post_code(0x43); // Should never see this post code.
}
sb7xx_51xx_before_pci_init();
post_code(0x42);
sb7xx_51xx_before_pci_init();
post_code(0x42);
- printk(BIOS_DEBUG, "\n*** Yes, the copy/decompress is taking a while, FIXME!\n");
post_cache_as_ram(); // BSP switch stack to ram, copy then execute LB.
post_code(0x43); // Should never see this post code.
}
post_cache_as_ram(); // BSP switch stack to ram, copy then execute LB.
post_code(0x43); // Should never see this post code.
}
sb7xx_51xx_before_pci_init();
post_code(0x42);
sb7xx_51xx_before_pci_init();
post_code(0x42);
- printk(BIOS_DEBUG, "\n*** Yes, the copy/decompress is taking a while, FIXME!\n");
post_cache_as_ram(); // BSP switch stack to ram, copy then execute LB.
post_code(0x43); // Should never see this post code.
}
post_cache_as_ram(); // BSP switch stack to ram, copy then execute LB.
post_code(0x43); // Should never see this post code.
}
sb7xx_51xx_before_pci_init();
post_code(0x42);
sb7xx_51xx_before_pci_init();
post_code(0x42);
- printk(BIOS_DEBUG, "\n*** Yes, the copy/decompress is taking a while, FIXME!\n");
post_cache_as_ram(); // BSP switch stack to ram, copy then execute LB.
post_code(0x43); // Should never see this post code.
}
post_cache_as_ram(); // BSP switch stack to ram, copy then execute LB.
post_code(0x43); // Should never see this post code.
}
sb7xx_51xx_before_pci_init();
post_code(0x42);
sb7xx_51xx_before_pci_init();
post_code(0x42);
- printk(BIOS_DEBUG, "\n*** Yes, the copy/decompress is taking a while, FIXME!\n");
post_cache_as_ram(); // BSP switch stack to ram, copy then execute LB.
post_code(0x43); // Should never see this post code.
}
post_cache_as_ram(); // BSP switch stack to ram, copy then execute LB.
post_code(0x43); // Should never see this post code.
}
sb7xx_51xx_before_pci_init();
post_code(0x42);
sb7xx_51xx_before_pci_init();
post_code(0x42);
- printk(BIOS_DEBUG, "\n*** Yes, the copy/decompress is taking a while, FIXME!\n");
post_cache_as_ram(); // BSP switch stack to ram, copy then execute LB.
post_code(0x43); // Should never see this post code.
}
post_cache_as_ram(); // BSP switch stack to ram, copy then execute LB.
post_code(0x43); // Should never see this post code.
}
sb7xx_51xx_before_pci_init();
post_code(0x42);
sb7xx_51xx_before_pci_init();
post_code(0x42);
- printk(BIOS_DEBUG, "\n*** Yes, the copy/decompress is taking a while, FIXME!\n");
post_cache_as_ram(); // BSP switch stack to ram, copy then execute LB.
post_code(0x43); // Should never see this post code.
}
post_cache_as_ram(); // BSP switch stack to ram, copy then execute LB.
post_code(0x43); // Should never see this post code.
}
sb7xx_51xx_before_pci_init();
post_code(0x42);
sb7xx_51xx_before_pci_init();
post_code(0x42);
- printk(BIOS_DEBUG, "\n*** Yes, the copy/decompress is taking a while, FIXME!\n");
post_cache_as_ram(); // BSP switch stack to ram, copy then execute LB.
post_code(0x43); // Should never see this post code.
}
post_cache_as_ram(); // BSP switch stack to ram, copy then execute LB.
post_code(0x43); // Should never see this post code.
}
raminit_amdmct(sysinfo);
post_code(0x41);
raminit_amdmct(sysinfo);
post_code(0x41);
- printk(BIOS_DEBUG, "\n*** Yes, the copy/decompress is taking a while, FIXME!\n");
post_cache_as_ram(); // BSP switch stack to ram, copy then execute LB.
post_code(0x43); // Should never see this post code.
}
post_cache_as_ram(); // BSP switch stack to ram, copy then execute LB.
post_code(0x43); // Should never see this post code.
}
raminit_amdmct(sysinfo);
post_code(0x41);
raminit_amdmct(sysinfo);
post_code(0x41);
- // printk(BIOS_DEBUG, "\n*** Yes, the copy/decompress is taking a while, FIXME!\n");
post_cache_as_ram(); // BSP switch stack to ram, copy + execute stage 2
post_code(0x42); // Should never see this post code.
}
post_cache_as_ram(); // BSP switch stack to ram, copy + execute stage 2
post_code(0x42); // Should never see this post code.
}
raminit_amdmct(sysinfo);
post_code(0x41);
raminit_amdmct(sysinfo);
post_code(0x41);
-// printk(BIOS_DEBUG, "\n*** Yes, the copy/decompress is taking a while, FIXME!\n");
post_cache_as_ram(); // BSP switch stack to ram, copy then execute LB.
post_code(0x42); // Should never see this post code.
}
post_cache_as_ram(); // BSP switch stack to ram, copy then execute LB.
post_code(0x42); // Should never see this post code.
}
raminit_amdmct(sysinfo);
post_code(0x41);
raminit_amdmct(sysinfo);
post_code(0x41);
- printk(BIOS_DEBUG, "\n*** Yes, the copy/decompress is taking a while, FIXME!\n");
post_cache_as_ram(); // BSP switch stack to ram, copy then execute LB.
post_code(0x43); // Should never see this post code.
}
post_cache_as_ram(); // BSP switch stack to ram, copy then execute LB.
post_code(0x43); // Should never see this post code.
}