#define PCI_DEVICE_ID_ATI_RS785MC_INT_GFX 0x9713
#define PCI_DEVICE_ID_ATI_RS785D_INT_GFX 0x9714
+#define PCI_DEVICE_ID_AMD_SR5650_HT 0x5A13
+#define PCI_DEVICE_ID_AMD_SR5670_HT 0x5A12
+#define PCI_DEVICE_ID_AMD_SR5690_HT 0x5A10
+#define PCI_DEVICE_ID_AMD_SR5650_PCIE 0x5A12
+#define PCI_DEVICE_ID_AMD_SR5650_PCIE_DEV2 0x5A16
+#define PCI_DEVICE_ID_AMD_SR5650_PCIE_DEV3 0x5A17
+#define PCI_DEVICE_ID_AMD_SR5650_PCIE_DEV4 0x5A18
+#define PCI_DEVICE_ID_AMD_SR5650_PCIE_DEV5 0x5A19
+#define PCI_DEVICE_ID_AMD_SR5650_PCIE_DEV6 0x5A1A
+#define PCI_DEVICE_ID_AMD_SR5650_PCIE_DEV7 0x5A1B
+#define PCI_DEVICE_ID_AMD_SR5650_PCIE_DEV9 0x5A1C
+#define PCI_DEVICE_ID_AMD_SR5650_PCIE_DEV10 0x5A1D
+#define PCI_DEVICE_ID_AMD_SR5650_PCIE_DEV11 0x5A1F
+#define PCI_DEVICE_ID_AMD_SR5650_PCIE_DEV12 0x5A20
+#define PCI_DEVICE_ID_AMD_SR5650_PCIE_DEV13 0x5A1E
+#define PCI_DEVICE_ID_AMD_SR5650_PCIE_DEV8 0x5A21
+
#define PCI_VENDOR_ID_VLSI 0x1004
#define PCI_DEVICE_ID_VLSI_82C592 0x0005
#define PCI_DEVICE_ID_VLSI_82C593 0x0006
--- /dev/null
+##
+## This file is part of the coreboot project.
+##
+## Copyright (C) 2010 Advanced Micro Devices, Inc.
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; version 2 of the License.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+##
+
+config SOUTHBRIDGE_AMD_SR5650
+ bool
--- /dev/null
+driver-y += sr5650.c
+driver-y += pcie.c
+driver-y += ht.c
--- /dev/null
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef SR5650_CHIP_H
+#define SR5650_CHIP_H
+
+/* Member variables are defined in Config.lb. */
+struct southbridge_amd_sr5650_config
+{
+ u8 gpp1_configuration; /* The configuration of General Purpose Port. */
+ u8 gpp2_configuration; /* The configuration of General Purpose Port. */
+ u8 gpp3a_configuration; /* The configuration of General Purpose Port. */
+ u16 port_enable; /* Which port is enabled? GPP(2,3,4,5,6,7,9,10,11,12,13) */
+};
+struct chip_operations;
+extern struct chip_operations southbridge_amd_sr5650_ops;
+
+#endif /* SR5650_CHIP_H */
--- /dev/null
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef __SR5650_CMN_H__
+#define __SR5650_CMN_H__
+
+#define NBMISC_INDEX 0x60
+#define NBHTIU_INDEX 0x94 /* Note: It is different with RS690, whose HTIU index is 0xA8 */
+#define NBMC_INDEX 0xE8
+#define NBPCIE_INDEX 0xE0
+#define EXT_CONF_BASE_ADDRESS 0xE0000000
+#define TEMP_MMIO_BASE_ADDRESS 0xC0000000
+
+static inline u32 nb_read_index(device_t dev, u32 index_reg, u32 index)
+{
+ pci_write_config32(dev, index_reg, index);
+ return pci_read_config32(dev, index_reg + 0x4);
+}
+
+static inline void nb_write_index(device_t dev, u32 index_reg, u32 index, u32 data)
+{
+ pci_write_config32(dev, index_reg, index);
+ pci_write_config32(dev, index_reg + 0x4, data);
+}
+
+static inline u32 nbmisc_read_index(device_t nb_dev, u32 index)
+{
+ return nb_read_index((nb_dev), NBMISC_INDEX, (index));
+}
+
+static inline void nbmisc_write_index(device_t nb_dev, u32 index, u32 data)
+{
+ nb_write_index((nb_dev), NBMISC_INDEX, ((index) | 0x80), (data));
+}
+
+static inline void set_nbmisc_enable_bits(device_t nb_dev, u32 reg_pos, u32 mask,
+ u32 val)
+{
+ u32 reg_old, reg;
+ reg = reg_old = nbmisc_read_index(nb_dev, reg_pos);
+ reg &= ~mask;
+ reg |= val;
+ if (reg != reg_old) {
+ nbmisc_write_index(nb_dev, reg_pos, reg);
+ }
+}
+
+static inline u32 htiu_read_index(device_t nb_dev, u32 index)
+{
+ return nb_read_index((nb_dev), NBHTIU_INDEX, (index));
+}
+
+static inline void htiu_write_index(device_t nb_dev, u32 index, u32 data)
+{
+ nb_write_index((nb_dev), NBHTIU_INDEX, ((index) | 0x100), (data));
+}
+
+static inline u32 nbmc_read_index(device_t nb_dev, u32 index)
+{
+ return nb_read_index((nb_dev), NBMC_INDEX, (index));
+}
+
+static inline void nbmc_write_index(device_t nb_dev, u32 index, u32 data)
+{
+ nb_write_index((nb_dev), NBMC_INDEX, ((index) | 1 << 9), (data));
+}
+
+static inline void set_htiu_enable_bits(device_t nb_dev, u32 reg_pos, u32 mask,
+ u32 val)
+{
+ u32 reg_old, reg;
+ reg = reg_old = htiu_read_index(nb_dev, reg_pos);
+ reg &= ~mask;
+ reg |= val;
+ if (reg != reg_old) {
+ htiu_write_index(nb_dev, reg_pos, reg);
+ }
+}
+
+static inline void set_nbcfg_enable_bits(device_t nb_dev, u32 reg_pos, u32 mask,
+ u32 val)
+{
+ u32 reg_old, reg;
+ reg = reg_old = pci_read_config32(nb_dev, reg_pos);
+ reg &= ~mask;
+ reg |= val;
+ if (reg != reg_old) {
+ pci_write_config32(nb_dev, reg_pos, reg);
+ }
+}
+
+static inline void set_nbcfg_enable_bits_8(device_t nb_dev, u32 reg_pos, u8 mask,
+ u8 val)
+{
+ u8 reg_old, reg;
+ reg = reg_old = pci_read_config8(nb_dev, reg_pos);
+ reg &= ~mask;
+ reg |= val;
+ if (reg != reg_old) {
+ pci_write_config8(nb_dev, reg_pos, reg);
+ }
+}
+
+static inline void set_nbmc_enable_bits(device_t nb_dev, u32 reg_pos, u32 mask,
+ u32 val)
+{
+ u32 reg_old, reg;
+ reg = reg_old = nbmc_read_index(nb_dev, reg_pos);
+ reg &= ~mask;
+ reg |= val;
+ if (reg != reg_old) {
+ nbmc_write_index(nb_dev, reg_pos, reg);
+ }
+}
+
+static inline void set_pcie_enable_bits(device_t dev, u32 reg_pos, u32 mask, u32 val)
+{
+ u32 reg_old, reg;
+ reg = reg_old = nb_read_index(dev, NBPCIE_INDEX, reg_pos);
+ reg &= ~mask;
+ reg |= val;
+ if (reg != reg_old) {
+ nb_write_index(dev, NBPCIE_INDEX, reg_pos, reg);
+ }
+}
+#endif /* __SR5650_CMN_H__ */
--- /dev/null
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include "sr5650.h"
+#include "cmn.h"
+
+/* family 10 only, for reg > 0xFF */
+#if CONFIG_NORTHBRIDGE_AMD_AMDFAM10 == 1
+static void set_fam10_ext_cfg_enable_bits(device_t fam10_dev, u32 reg_pos, u32 mask,
+ u32 val)
+{
+ u32 reg_old, reg;
+ reg = reg_old = Get_NB32(fam10_dev, reg_pos);
+ reg &= ~mask;
+ reg |= val;
+ if (reg != reg_old) {
+ Set_NB32(fam10_dev, reg_pos, reg);
+ }
+}
+#else
+#define set_fam10_ext_cfg_enable_bits(a, b, c, d) do {} while (0)
+#endif
+
+
+/*
+* Compliant with CIM_33's ATINB_PrepareInit
+*/
+static void get_cpu_rev(void)
+{
+ u32 eax;
+
+ eax = cpuid_eax(1);
+ printk(BIOS_INFO, "get_cpu_rev EAX=0x%x.\n", eax);
+ if (eax <= 0xfff)
+ printk(BIOS_INFO, "CPU Rev is K8_Cx.\n");
+ else if (eax <= 0x10fff)
+ printk(BIOS_INFO, "CPU Rev is K8_Dx.\n");
+ else if (eax <= 0x20fff)
+ printk(BIOS_INFO, "CPU Rev is K8_Ex.\n");
+ else if (eax <= 0x40fff)
+ printk(BIOS_INFO, "CPU Rev is K8_Fx.\n");
+ else if (eax == 0x60fb1 || eax == 0x60f81) /*These two IDS are exception, they are G1. */
+ printk(BIOS_INFO, "CPU Rev is K8_G1.\n");
+ else if (eax <= 0X60FF0)
+ printk(BIOS_INFO, "CPU Rev is K8_G0.\n");
+ else if (eax <= 0x100000)
+ printk(BIOS_INFO, "CPU Rev is K8_G1.\n");
+ else if (eax <= 0x100f00)
+ printk(BIOS_INFO, "CPU Rev is Fam 10.\n");
+ else
+ printk(BIOS_INFO, "CPU Rev is not recognized.\n");
+}
+
+/*
+CIM NB_GetRevisionInfo()
+*/
+static u8 get_nb_rev(device_t nb_dev)
+{
+ u8 reg;
+ reg = pci_read_config8(nb_dev, 0x8); /* copy from CIM, can't find in doc */
+ switch(reg & 3)
+ {
+ case 0x00:
+ reg = REV_SR5650_A11;
+ break;
+ case 0x02:
+ default:
+ reg = REV_SR5650_A12;
+ break;
+ }
+ return reg;
+}
+
+/*****************************************
+* Compliant with SR5650_CIMX_4_5_0 NBHT_InitHT().
+* Init HT link speed/width for sr5650 -- k8 link
+1: Check CPU Family, Family10?
+2: Get CPU's HT speed and width
+3: Decide HT mode 1 or 3 by HT Speed. >1GHz: HT3, else HT1
+4:
+*****************************************/
+static const u8 sr5650_ibias[] = {
+ /* 1, 3 are reserved. */
+ [0x0] = 0x44, /* 200Mhz HyperTransport 1 only */
+ [0x2] = 0x44, /* 400Mhz HyperTransport 1 only */
+ [0x4] = 0xB6, /* 600Mhz HyperTransport 1 only */
+ [0x5] = 0x44, /* 800Mhz HyperTransport 1 only */
+ [0x6] = 0x96, /* 1Ghz HyperTransport 1 only */
+ /* HT3 for Family 10 */
+ [0x7] = 0xB6, /* 1.2Ghz HyperTransport 3 only */
+ [0x8] = 0x23, /* 1.4Ghz HyperTransport 3 only */
+ [0x9] = 0x44, /* 1.6Ghz HyperTransport 3 only */
+ [0xa] = 0x64, /* 1.8Ghz HyperTransport 3 only */
+ [0xb] = 0x96, /* 2.0Ghz HyperTransport 3 only */
+ [0xc] = 0xA6, /* 2.2Ghz HyperTransport 3 only */
+ [0xd] = 0xB6, /* 2.4Ghz HyperTransport 3 only */
+ [0xe] = 0xC6, /* 2.6Ghz HyperTransport 3 only */
+};
+
+static void sr5650_htinit(void)
+{
+ /*
+ * About HT, it has been done in enumerate_ht_chain().
+ */
+ device_t cpu_f0, sr5650_f0, clk_f1, cpu1_f0;
+ u32 reg;
+ u8 cpu_ht_freq, ibias;
+
+ cpu_f0 = PCI_DEV(0, 0x18, 0);
+ cpu1_f0 = PCI_DEV(0, 0x19, 0);
+ /************************
+ * get cpu's ht freq, in cpu's function 0, offset 0x88
+ * bit11-8, specifics the maximum operation frequency of the link's transmitter clock.
+ * The link frequency field (Frq) is cleared by cold reset. SW can write a nonzero
+ * value to this reg, and that value takes effect on the next warm reset or
+ * LDTSTOP_L disconnect sequence.
+ * please see the table sr5650_ibias about the value and its corresponding frequency.
+ ************************/
+ /* Link0, Link1 are for connection between P0 and P1.
+ * Link2 should be 0xC8?
+ * TODO: Check the topology of the MP and NB. Or we just read the nbconfig? */
+ /* NOTE: In most cases, we only have one CPU. In that case, we should read 0x88. */
+
+ reg = pci_read_config32(cpu1_f0, 0x0);
+ reg = pci_read_config32(cpu_f0,
+ reg == 0 || reg == -1 ? 0x88 : 0xC8
+ );
+ cpu_ht_freq = (reg & 0xf00) >> 8;
+ printk(BIOS_INFO, "sr5650_htinit cpu_ht_freq=%x.\n", cpu_ht_freq);
+ sr5650_f0 = PCI_DEV(0, 0, 0);
+
+ clk_f1 = PCI_DEV(0, 0, 1); /* We need to make sure the F1 is accessible. */
+
+ ibias = sr5650_ibias[cpu_ht_freq];
+
+ /* If HT freq>1GHz, we assume the CPU is fam10, else it is K8.
+ * Is it appropriate?
+ * Frequency is 1GHz, i.e. cpu_ht_freq is 6, in most cases.
+ * So we check 6 only, it would be faster. */
+ if ((cpu_ht_freq == 0x6) || (cpu_ht_freq == 0x5) || (cpu_ht_freq == 0x4) ||
+ (cpu_ht_freq == 0x2) || (cpu_ht_freq == 0x0)) {
+ printk(BIOS_INFO, "sr5650_htinit: HT1 mode\n");
+
+ /* HT1 mode, RPR 5.4.2 */
+ /* set IBIAS code */
+ set_nbcfg_enable_bits(clk_f1, 0xD8, 0x3FF, ibias);
+ /* Optimizes chipset HT transmitter drive strength */
+ set_htiu_enable_bits(sr5650_f0, 0x2A, 0x3, 0x3);
+ } else if ((cpu_ht_freq > 0x6) && (cpu_ht_freq < 0xf)) {
+ printk(BIOS_INFO, "sr5650_htinit: HT3 mode\n");
+
+ /* Enable Protocol checker */
+ set_htiu_enable_bits(sr5650_f0, 0x1E, 0xFFFFFFFF, 0x7FFFFFFC);
+
+ #if CONFIG_NORTHBRIDGE_AMD_AMDFAM10 == 1 /* save some spaces */
+ /* HT3 mode, RPR 5.4.3 */
+ set_nbcfg_enable_bits(sr5650_f0, 0x9c, 0x3 << 16, 0);
+
+ /* set IBIAS code */
+ set_nbcfg_enable_bits(clk_f1, 0xD8, 0x3FF, ibias);
+ /* Optimizes chipset HT transmitter drive strength */
+ set_htiu_enable_bits(sr5650_f0, 0x2A, 0x3, 0x1);
+ /* Enables error-retry mode */
+ set_nbcfg_enable_bits(sr5650_f0, 0x44, 0x1, 0x1);
+ /* Enables scrambling and Disalbes command throttling */
+ set_nbcfg_enable_bits(sr5650_f0, 0xac, (1 << 3) | (1 << 14), (1 << 3) | (1 << 14));
+ /* Enables transmitter de-emphasis */
+ set_nbcfg_enable_bits(sr5650_f0, 0xa4, 1 << 31, 1 << 31);
+ /* Enabels transmitter de-emphasis level */
+ /* Sets training 0 time */
+ set_nbcfg_enable_bits(sr5650_f0, 0xa0, 0x3F, 0x14);
+
+ /* Enables strict TM4 detection */
+ set_htiu_enable_bits(sr5650_f0, 0x15, 0x1 << 22, 0x1 << 22);
+
+ /* HyperTransport 3 Processor register settings to be done in northbridge */
+ /* Enables error-retry mode */
+ set_fam10_ext_cfg_enable_bits(cpu_f0, 0x130, 1 << 0, 1 << 0);
+ set_fam10_ext_cfg_enable_bits(cpu_f0, 0x134, 1 << 0, 1 << 0); /* TODO: Check if it is needed to set other node. */
+ set_fam10_ext_cfg_enable_bits(cpu_f0, 0x138, 1 << 0, 1 << 0);
+ /* Enables scrambling */
+ set_fam10_ext_cfg_enable_bits(cpu_f0, 0x170, 1 << 3, 1 << 3);
+ set_fam10_ext_cfg_enable_bits(cpu_f0, 0x174, 1 << 3, 1 << 3); /* TODO: Check if it is needed to set other node. */
+ set_fam10_ext_cfg_enable_bits(cpu_f0, 0x178, 1 << 3, 1 << 3);
+ /* Enables transmitter de-emphasis
+ * This depends on the PCB design and the trace */
+ /* Disables command throttling */
+ set_fam10_ext_cfg_enable_bits(cpu_f0, 0x168, 1 << 10, 1 << 10);
+ /* Sets Training 0 Time. See T0Time table for encodings */
+ set_fam10_ext_cfg_enable_bits(cpu_f0, 0x16C, 0x3F, 0x20);
+ /* HT Buffer Allocation for Ganged Links!!! */
+ #endif /* #if CONFIG_NORTHBRIDGE_AMD_AMDFAM10 == 1 */
+ }
+}
+
+#if CONFIG_NORTHBRIDGE_AMD_AMDFAM10 != 1 /* save some spaces */
+/*******************************************************
+* Optimize k8 with UMA.
+* See BKDG_NPT_0F guide for details.
+* The processor node is addressed by its Node ID on the HT link and can be
+* accessed with a device number in the PCI configuration space on Bus0.
+* The Node ID 0 is mapped to Device 24 (0x18), the Node ID 1 is mapped
+* to Device 25, and so on.
+* The processor implements configuration registers in PCI configuration
+* space using the following four headers
+* Function0: HT technology configuration
+* Function1: Address map configuration
+* Function2: DRAM and HT technology Trace mode configuration
+* Function3: Miscellaneous configuration
+*******************************************************/
+static void k8_optimization(void)
+{
+ device_t k8_f0, k8_f2, k8_f3;
+ msr_t msr;
+
+ printk(BIOS_INFO, "k8_optimization()\n");
+ k8_f0 = PCI_DEV(0, 0x18, 0);
+ k8_f2 = PCI_DEV(0, 0x18, 2);
+ k8_f3 = PCI_DEV(0, 0x18, 3);
+
+ pci_write_config32(k8_f0, 0x90, 0x01700169); /* CIM NPT_Optimization */
+ set_nbcfg_enable_bits(k8_f0, 0x68, 1 << 28, 0 << 28);
+ set_nbcfg_enable_bits(k8_f0, 0x68, 1 << 26 | 1 << 27,
+ 1 << 26 | 1 << 27);
+ set_nbcfg_enable_bits(k8_f0, 0x68, 1 << 11, 1 << 11);
+ /* set_nbcfg_enable_bits(k8_f0, 0x84, 1 << 11 | 1 << 13 | 1 << 15, 1 << 11 | 1 << 13 | 1 << 15); */ /* TODO */
+
+ pci_write_config32(k8_f3, 0x70, 0x51220111); /* CIM NPT_Optimization */
+ pci_write_config32(k8_f3, 0x74, 0x50404021);
+ pci_write_config32(k8_f3, 0x78, 0x08002A00);
+ if (pci_read_config32(k8_f3, 0xE8) & 0x3<<12)
+ pci_write_config32(k8_f3, 0x7C, 0x0000211A); /* dual core */
+ else
+ pci_write_config32(k8_f3, 0x7C, 0x0000212B); /* single core */
+ set_nbcfg_enable_bits_8(k8_f3, 0xDC, 0xFF, 0x25);
+
+ set_nbcfg_enable_bits(k8_f2, 0xA0, 1 << 5, 1 << 5);
+ set_nbcfg_enable_bits(k8_f2, 0x94, 0xF << 24, 7 << 24);
+ set_nbcfg_enable_bits(k8_f2, 0x90, 1 << 10, 0 << 10);
+ set_nbcfg_enable_bits(k8_f2, 0xA0, 3 << 2, 3 << 2);
+ set_nbcfg_enable_bits(k8_f2, 0xA0, 1 << 5, 1 << 5);
+
+ msr = rdmsr(0xC001001F);
+ msr.lo &= ~(1 << 9);
+ msr.hi &= ~(1 << 4);
+ wrmsr(0xC001001F, msr);
+}
+#else
+#define k8_optimization() do{}while(0)
+#endif /* #if CONFIG_NORTHBRIDGE_AMD_AMDFAM10 != 1 */
+
+#if CONFIG_NORTHBRIDGE_AMD_AMDFAM10 == 1 /* save some spaces */
+void fam10_optimization(void)
+{
+ device_t cpu_f0, cpu_f2, cpu_f3;
+ device_t cpu1_f0, cpu1_f2, cpu1_f3;
+ msr_t msr;
+ u32 val;
+
+ printk(BIOS_INFO, "fam10_optimization()\n");
+ msr = rdmsr(0xC001001F);
+ msr.hi |= 1 << 14; /* bit 46: EnableCf8ExtCfg */
+ wrmsr(0xC001001F, msr);
+
+ cpu_f0 = PCI_DEV(0, 0x18, 0);
+ cpu_f2 = PCI_DEV(0, 0x18, 2);
+ cpu_f3 = PCI_DEV(0, 0x18, 3);
+ cpu1_f0 = PCI_DEV(0, 0x19, 0);
+ cpu1_f2 = PCI_DEV(0, 0x19, 2);
+ cpu1_f3 = PCI_DEV(0, 0x19, 3);
+
+ val = pci_read_config32(cpu1_f3, 0x8C);
+ val |= 1 << 14;
+ pci_write_config32(cpu1_f3, 0x8C, val);
+
+ /* TODO: HT Buffer Allocation for (un)Ganged Links */
+ /* rpr Table 5-11, 5-12 */
+}
+#else
+#define fam10_optimization() do{}while(0)
+#endif /* #if CONFIG_NORTHBRIDGE_AMD_AMDFAM10 == 1 */
+
+/*****************************************
+* Compliant with CIM_33's ATINB_PCICFG_POR_TABLE
+*****************************************/
+static void sr5650_por_pcicfg_init(device_t nb_dev)
+{
+ /* enable PCI Memory Access */
+ set_nbcfg_enable_bits_8(nb_dev, 0x04, (u8)(~0xFD), 0x02);
+
+ set_nbcfg_enable_bits(nb_dev, 0x14, ~0, 0x0);
+ set_nbcfg_enable_bits(nb_dev, 0x18, ~0, 0x0);
+ set_nbcfg_enable_bits(nb_dev, 0x20, ~0, 0x0);
+ set_nbcfg_enable_bits(nb_dev, 0x84, ~0, 0x03000010);
+
+ /* Reg4Ch[1]=1 (APIC_ENABLE) force cpu request with address 0xFECx_xxxx to south-bridge
+ * Reg4Ch[6]=1 (BMMsgEn) enable BM_Set message generation
+ * BMMsgEn */
+ set_nbcfg_enable_bits(nb_dev, 0x4C, (u8)(~0x00), 0x52042);
+
+ set_nbcfg_enable_bits(nb_dev, 0x7C, (u8)(~0), 0x0);
+
+ /* Reg8Ch[10:9] = 0x3 Enables Gfx Debug BAR,
+ * force this BAR as mem type in sr5650_gfx.c */
+ //set_nbcfg_enable_bits_8(nb_dev, 0x8D, (u8)(~0xFF), 0x03);
+}
+
+/*****************************************
+* Compliant with CIM_33's ATINB_MISCIND_POR_TABLE
+* Compliant with CIM_33's MISC_INIT_TBL
+*****************************************/
+static void sr5650_por_misc_index_init(device_t nb_dev)
+{
+ /* disable IOMMU */
+ set_nbmisc_enable_bits(nb_dev, 0x75, 0x1, 0x0);
+ /* NBMISCIND:0x75[29]= 1 Device ID for hotplug and PME message */
+ set_nbmisc_enable_bits(nb_dev, 0x75, 1 << 29, 1 << 29);
+ set_nbmisc_enable_bits(nb_dev, 0x75, 1 << 9, 1 << 9); /* no doc reference, comply with BTS */
+ set_nbmisc_enable_bits(nb_dev, 0x46, 1 << 7, 1 << 7); /* bit7 BTS fail*/
+ /*P2P*/
+ set_nbmisc_enable_bits(nb_dev, 0x48, 1 << 8, 0);
+
+ set_nbmisc_enable_bits(nb_dev, 0x2A, 1 << 15 | 1 << 17, 1 << 17);
+ set_nbmisc_enable_bits(nb_dev, 0x2B, 1 << 15 | 1 << 27, 1 << 15 | 1 << 27);
+ set_nbmisc_enable_bits(nb_dev, 0x2C, 1 << 0 | 1 << 1 | 1 << 5 | 1 << 4 | 1 << 10, 1 << 0 | 1 << 1 | 1 << 5);
+ set_nbmisc_enable_bits(nb_dev, 0x32, 0x3F << 20, 0x2A << 20);
+ set_nbmisc_enable_bits(nb_dev, 0x34, 1 << 7 | 1 << 15 | 1 << 23 | 1 << 31, 0); /* bit31 BTS fail */
+ set_nbmisc_enable_bits(nb_dev, 0x35, 0x3F << 26, 0x2A << 26);
+ set_nbmisc_enable_bits(nb_dev, 0x37, 0xfff << 20, 0xddd << 20);
+ set_nbmisc_enable_bits(nb_dev, 0x37, 7 << 11, 0);
+ /* PCIE CDR setting */
+ set_nbmisc_enable_bits(nb_dev, 0x38, 0xFFFFFFFF, 0xC0C0C0);
+ set_nbmisc_enable_bits(nb_dev, 0x39, 1 << 31, 0); /* bit31 BTS fail */
+ set_nbmisc_enable_bits(nb_dev, 0x22, 0xFFFFFFFF, (1 << 27) | (0x8 << 12) | (0x8 << 16) | (0x8 << 20));
+ set_nbmisc_enable_bits(nb_dev, 0x22, 1 << 1 | 1 << 2 | 1 << 6 | 1 << 7, 1 << 1 | 1 << 2 | 1 << 6 | 1 << 7);
+
+ set_nbmisc_enable_bits(nb_dev, 0x07, 0xF << 4 | 1 << 24, 0xF << 4 | 1 << 24);
+ set_nbmisc_enable_bits(nb_dev, 0x67, 1 << 10 | 1 << 11 | 1 << 26, 1 << 11);
+ set_nbmisc_enable_bits(nb_dev, 0x67, 3 << 21, 3 << 21);
+ set_nbmisc_enable_bits(nb_dev, 0x68, 1 << 8 | 1 << 9 | 1 << 19, 1 << 9 | 1 << 19);
+ set_nbmisc_enable_bits(nb_dev, 0x6B, 3 << 3 | 1 << 15 | 0x1F << 27, 3 << 3 | 1 << 15 | 0x1F << 27);
+ set_nbmisc_enable_bits(nb_dev, 0x6C, 0xFFFFFFFF, 0x41183000);
+
+ /* NB_MISC_IND_WR_EN + IOC_PCIE_CNTL
+ * Block non-snoop DMA request if PMArbDis is set.
+ * Set BMSetDis */
+ set_nbmisc_enable_bits(nb_dev, 0x0B, 0xFFFFFFFF, 0x00400180);
+ set_nbmisc_enable_bits(nb_dev, 0x01, 0xFFFFFFFF, 0x00000310);
+
+ /* NBCFG (NBMISCIND 0x0): NB_CNTL -
+ * HIDE_NB_AGP_CAP ([0], default=1)HIDE
+ * HIDE_P2P_AGP_CAP ([1], default=1)HIDE
+ * HIDE_NB_GART_BAR ([2], default=1)HIDE
+ * AGPMODE30 ([4], default=0)DISABLE
+ * AGP30ENCHANCED ([5], default=0)DISABLE
+ * HIDE_AGP_CAP ([8], default=1)ENABLE */
+ set_nbmisc_enable_bits(nb_dev, 0x00, 0x0000FFFF, 0 << 0 | 1 << 1 | 1 << 2 | 0 << 6);
+
+ /* IOC_LAT_PERF_CNTR_CNTL */
+ set_nbmisc_enable_bits(nb_dev, 0x30, 0xFF, 0x00);
+ //set_nbmisc_enable_bits(nb_dev, 0x31, 0xFF, 0x00);
+
+ /* IOC_LAT_PERF_CNTR_OUT */
+ /* IOC_JTAG_CNTL */
+ set_nbmisc_enable_bits(nb_dev, 0x47, 0xFFFFFFFF, 0x0000000B);
+
+ set_nbmisc_enable_bits(nb_dev, 0x12, 0xFFFFFFFF, 0x00FB5555);
+ set_nbmisc_enable_bits(nb_dev, 0x0C, 0xFFFFFFFF, 0x001f37EC);
+ set_nbmisc_enable_bits(nb_dev, 0x15, 0xFFFFFFFF, 0x0);
+
+ /* NB_PROG_DEVICE_REMAP */
+ set_nbmisc_enable_bits(nb_dev, 0x20, 0xFFFFFFFF, 0x0);
+ set_nbmisc_enable_bits(nb_dev, 0x21, 0xFFFFFFFF, 0x0);
+
+ /* Compliant with CIM_33's MISC_INIT_TBL, except Hide NB_BAR3_PCIE
+ * Enable access to DEV8
+ * Enable setPower message for all ports
+ */
+ set_nbmisc_enable_bits(nb_dev, 0x51, 1 << 20 | 1 << 8, 1 << 20 | 1 << 8);
+ set_nbmisc_enable_bits(nb_dev, 0x53, 1 << 20 | 1 << 8, 1 << 20 | 1 << 8);
+ set_nbmisc_enable_bits(nb_dev, 0x55, 1 << 20 | 1 << 8, 1 << 20 | 1 << 8);
+ set_nbmisc_enable_bits(nb_dev, 0x57, 1 << 20 | 1 << 8, 1 << 20 | 1 << 8);
+ set_nbmisc_enable_bits(nb_dev, 0x59, 1 << 20 | 1 << 8, 1 << 20 | 1 << 8);
+ set_nbmisc_enable_bits(nb_dev, 0x5B, 1 << 20 | 1 << 8, 1 << 20 | 1 << 8);
+ set_nbmisc_enable_bits(nb_dev, 0x5D, 1 << 20 | 1 << 8, 1 << 20 | 1 << 8);
+ set_nbmisc_enable_bits(nb_dev, 0x5F, 1 << 20 | 1 << 8, 1 << 20 | 1 << 8);
+ set_nbmisc_enable_bits(nb_dev, 0x61, 1 << 20 | 1 << 8, 1 << 20 | 1 << 8);
+ set_nbmisc_enable_bits(nb_dev, 0x63, 1 << 20 | 1 << 8, 1 << 20 | 1 << 8);
+
+ /* Disable bus-master trigger event from SB and Enable set_slot_power message to SB */
+ set_nbmisc_enable_bits(nb_dev, 0x0B, 0xffffffff, 0x400180);
+}
+
+/*****************************************
+* Some setting is from rpr. Some is from CIMx.
+*****************************************/
+static void sr5650_por_htiu_index_init(device_t nb_dev)
+{
+ device_t cpu_f0;
+
+ cpu_f0 = PCI_DEV(0, 0x18, 0);
+
+ set_htiu_enable_bits(nb_dev, 0x1C, 0x1<<17, 0x1<<17);
+ set_htiu_enable_bits(nb_dev, 0x05, 0x1<<8, 0x1<<8);
+ set_htiu_enable_bits(nb_dev, 0x06, 0x1<<0, 0x0<<0);
+ set_htiu_enable_bits(nb_dev, 0x06, 0x1<<1, 0x1<<1);
+ set_htiu_enable_bits(nb_dev, 0x06, 0x1<<9, 0x1<<9);
+ set_htiu_enable_bits(nb_dev, 0x06, 0x1<<13, 0x1<<13);
+ set_htiu_enable_bits(nb_dev, 0x06, 0x1<<17, 0x1<<17);
+ set_htiu_enable_bits(nb_dev, 0x06, 0x3<<15, 0x3<<15);
+ set_htiu_enable_bits(nb_dev, 0x06, 0x1<<25, 0x1<<25);
+ set_htiu_enable_bits(nb_dev, 0x06, 0x1<<30, 0x1<<30);
+
+ set_htiu_enable_bits(nb_dev, 0x07, 0x1 << 0 | 0x1 << 1 | 0x1 << 2, 0x1 << 0);
+
+ set_htiu_enable_bits(nb_dev, 0x16, 0x1<<11, 0x1<<11);
+
+ set_htiu_enable_bits(nb_dev, 0x1D, 0x1<<2, 0x1<<2);
+ set_htiu_enable_bits(nb_dev, 0x1D, 0x1<<4, 0x1<<4);
+
+ set_nbcfg_enable_bits(cpu_f0, 0x68, 3 << 21, 0 << 21);
+ axindxc_reg(0x10, 1 << 9, 1 << 9);
+ set_pcie_enable_bits(nb_dev, 0x10 | 5 << 16, 1 << 9, 1 << 9);
+ set_htiu_enable_bits(nb_dev, 0x06, 0x1<<26, 0x1<<26);
+ set_htiu_enable_bits(nb_dev, 0x16, 0x1<<10, 0x1<<10);
+
+ /* Enable BIAS circuit for all lanes. */
+ //set_htiu_enable_bits(nb_dev, 0x2B, 0xF<<28, 0xF<<28);
+ set_htiu_enable_bits(nb_dev, 0x2B, 0xF << 28, 0);
+ set_htiu_enable_bits(nb_dev, 0x05, 0xFFFFFF, 0xFF558);
+ set_htiu_enable_bits(nb_dev, 0x06, 0xFFFFFFFE, 0x04203A202);
+ set_htiu_enable_bits(nb_dev, 0x0C, 0xFFFF, 0x101);
+
+ /* A21 only */
+ //if (REV_SR5650_A21 == get_nb_rev(nb_dev)) {
+ if (get_nb_rev(nb_dev) > REV_SR5650_A11) {
+ set_htiu_enable_bits(nb_dev, 0x05, 0x3<<3| 1<<6 | 1<<10 | 0xFF<<12, 0x3<<3 | 1<<6 | 1<<10 | 0xFF<<12);
+ set_htiu_enable_bits(nb_dev, 0x1D, 1 << 2 | 1 << 4, 0);
+ }
+}
+
+/*****************************************
+* Compliant with CIM_33's ATINB_POR_INIT_JMPDI
+* Configure SR5650 registers to power-on default RPR.
+* POR: Power On Reset
+* RPR: Register Programming Requirements
+*****************************************/
+static void sr5650_por_init(device_t nb_dev)
+{
+ printk(BIOS_INFO, "sr5650_por_init\n");
+ /* ATINB_PCICFG_POR_TABLE, initialize the values for sr5650 PCI Config registers */
+ sr5650_por_pcicfg_init(nb_dev);
+
+ /* ATINB_MISCIND_POR_TABLE */
+ sr5650_por_misc_index_init(nb_dev);
+
+ /* ATINB_HTIUNBIND_POR_TABLE */
+ sr5650_por_htiu_index_init(nb_dev);
+
+ /* ATINB_CLKCFG_PORT_TABLE */
+ /* sr5650 A11 SB Link full swing? */
+}
+
+/* enable CFG access to Dev8, which is the SB P2P Bridge */
+static void enable_sr5650_dev8(void)
+{
+ set_nbmisc_enable_bits(PCI_DEV(0, 0, 0), 0x00, 1 << 6, 1 << 6);
+}
+
+/*
+* Compliant with CIM_33's AtiNBInitEarlyPost (AtiInitNBBeforePCIInit).
+*/
+static void sr5650_before_pci_init(void)
+{
+}
+
+/*
+* The calling sequence is same as CIM.
+*/
+static void sr5650_early_setup(void)
+{
+ device_t nb_dev = PCI_DEV(0, 0, 0);
+ printk(BIOS_INFO, "sr5650_early_setup()\n");
+
+ /*ATINB_PrepareInit */
+ get_cpu_rev();
+
+ switch (get_nb_rev(nb_dev)) { /* PCIEMiscInit */
+ case REV_SR5650_A11:
+ printk(BIOS_INFO, "NB Revision is A11.\n");
+ break;
+ case REV_SR5650_A12:
+ printk(BIOS_INFO, "NB Revision is A12.\n");
+ break;
+ case REV_SR5650_A21:
+ printk(BIOS_INFO, "NB Revision is A21.\n");
+ break;
+ }
+
+#if CONFIG_NORTHBRIDGE_AMD_AMDFAM10 == 1
+
+ fam10_optimization();
+#else
+ k8_optimization();
+#endif
+
+ sr5650_por_init(nb_dev);
+}
+
+/**
+ * @brief disable GPP1 Port0,1, GPP3a Port0,1,2,3,4,5
+ *
+ */
+void disable_pcie_bridge(void)
+{
+ u32 mask;
+ u32 reg;
+ device_t nb_dev = PCI_DEV(0, 0, 0);
+
+ mask = (1 << 2) | (1 << 3) | (1 << 4) | (1 << 5) | (1 << 6) | (1 << 7) |
+ (1 << 16) | (1 << 17);
+ reg = mask;
+ set_nbmisc_enable_bits(nb_dev, 0x0c, mask, reg);
+}
--- /dev/null
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include <arch/ioapic.h>
+#include "sr5650.h"
+
+/* Table 6-6 Recommended Interrupt Routing Configuration */
+typedef struct _apic_device_info {
+ u8 group;
+ u8 swizzle;
+ u8 pin;
+} apic_device_info;
+
+#define ABCD 0
+#define BCDA 1
+#define CDAB 2
+#define DABC 3
+
+static const apic_device_info default_apic_device_info_t [] = {
+ /* Group Swizzling Port Int Pin */
+ [0] = {0, 0, 31}, /* HT */
+ [1] = {0, 0, 31}, /* IOMMU */
+ [2] = {0, ABCD, 28}, /* Dev2 Grp0 [Int - 0..3] */
+ [3] = {1, ABCD, 28}, /* Dev3 Grp1 [Int - 4..7] */
+ [4] = {5, ABCD, 28}, /* Dev4 Grp5 [Int - 20..23] */
+ [5] = {5, CDAB, 28}, /* Dev5 Grp5 [Int - 20..23] */
+ [6] = {6, BCDA, 29}, /* Dev6 Grp6 [Int - 24..27] */
+ [7] = {6, CDAB, 29}, /* Dev7 Grp6 [Int - 24..27] */
+ [8] = {0, 0, 0 }, /* Reserved */
+ [9] = {6, ABCD, 29}, /* Dev9 Grp6 [Int - 24..27] */
+ [10] = {5, BCDA, 30}, /* Dev10 Grp5 [Int - 20..23] */
+ [11] = {2, ABCD, 30}, /* Dev11 Grp2 [Int - 8..11] */
+ [12] = {3, ABCD, 30}, /* Dev12 Grp3 [Int - 12..15] */
+ [13] = {4, ABCD, 30} /* Dev13 Grp4 [Int - 16..19] */
+};
+
+/* Their name are quite regular. So I undefine them. */
+#undef ABCD
+#undef BCDA
+#undef CDAB
+#undef DABC
+
+/* Init APIC of sr5690 */
+static void sr5690_apic_init(struct device *dev)
+{
+ u32 dword;
+ const apic_device_info *entry = default_apic_device_info_t;
+
+ /* rpr6.2.(2). Write to the IOAPIC Features Enable register */
+ pci_write_config32(dev, 0xF8, 0x0);
+ pci_write_config32(dev, 0xFC, 0x1F);
+ /* rpr6.2.(3). Write to the remaining interrupt routing registers */
+
+ /* IOAPICCMISCIND:0x3, group & swizzle of Dev 2,3,4,5 */
+ dword = (entry[2].group | entry[2].swizzle << 4) << 0 |
+ (entry[3].group | entry[3].swizzle << 4) << 8 |
+ (entry[4].group | entry[4].swizzle << 4) << 16 |
+ (entry[5].group | entry[5].swizzle << 4) << 24;
+ pci_write_config32(dev, 0xF8, 0x3);
+ pci_write_config32(dev, 0xFC, dword);
+
+ /* IOAPICCMISCIND:0x4, group & swizzle of Dev 6,7,9,10 */
+ dword = (entry[6].group | entry[6].swizzle << 4) << 0 |
+ (entry[7].group | entry[7].swizzle << 4) << 8 |
+ (entry[9].group | entry[9].swizzle << 4) << 16 |
+ (entry[10].group | entry[10].swizzle << 4) << 24;
+ pci_write_config32(dev, 0xF8, 0x4);
+ pci_write_config32(dev, 0xFC, dword);
+
+ /* IOAPICCMISCIND:0x5, group & swizzle of Dev 11,12,13 */
+ dword = (entry[11].group | entry[11].swizzle << 4) << 0 |
+ (entry[12].group | entry[12].swizzle << 4) << 8 |
+ (entry[13].group | entry[13].swizzle << 4) << 16;
+ pci_write_config32(dev, 0xF8, 0x5);
+ pci_write_config32(dev, 0xFC, dword);
+
+ /* IOAPICCMISCIND:0x6, pin map of dev 2,3,4,5 */
+ dword = entry[2].pin |
+ entry[3].pin << 8 |
+ entry[4].pin << 16|
+ entry[5].pin << 24;
+ pci_write_config32(dev, 0xF8, 0x6);
+ pci_write_config32(dev, 0xFC, dword);
+
+ /* IOAPICCMISCIND:0x7, pin map of dev 6,7,8,9 */
+ dword = entry[6].pin |
+ entry[7].pin << 8 |
+ entry[8].pin << 16|
+ entry[9].pin << 24;
+ pci_write_config32(dev, 0xF8, 0x7);
+ pci_write_config32(dev, 0xFC, dword);
+
+ /* IOAPICCMISCIND:0x8, pin map of dev 10,11,12,13 */
+ dword = entry[10].pin |
+ entry[11].pin << 8 |
+ entry[12].pin << 16|
+ entry[13].pin << 24;
+ pci_write_config32(dev, 0xF8, 0x8);
+ pci_write_config32(dev, 0xFC, dword);
+
+ /* IOAPICCMISCIND:0x9, pin map of ht, iommu */
+ dword = entry[0].pin | entry[1].pin << 8;
+ pci_write_config32(dev, 0xF8, 0x9);
+ pci_write_config32(dev, 0xFC, dword);
+
+ pci_write_config32(dev, 0xF8, 0x1);
+ dword = pci_read_config32(dev, 0xFC) & 0xfffffff0;
+ /* TODO: On SR56x0/SP5100 board, the IOAPIC on SR56x0 is the
+ * 2nd one. We need to check if it also is on your board. */
+ setup_ioapic(dword, 1);
+}
+
+static void pcie_init(struct device *dev)
+{
+ /* Enable pci error detecting */
+ u32 dword;
+
+ printk(BIOS_INFO, "pcie_init in sr5650_ht.c\n");
+
+ /* System error enable */
+ dword = pci_read_config32(dev, 0x04);
+ dword |= (1 << 8); /* System error enable */
+ dword |= (1 << 30); /* Clear possible errors */
+ pci_write_config32(dev, 0x04, dword);
+
+ /*
+ * 1 is APIC enable
+ * 18 is enable nb to accept A4 interrupt request from SB.
+ */
+ dword = pci_read_config32(dev, 0x4C);
+ dword |= 1 << 1 | 1 << 18; /* Clear possible errors */
+ pci_write_config32(dev, 0x4C, dword);
+
+ sr5690_apic_init(dev);
+}
+
+static void sr5690_read_resource(struct device *dev)
+{
+ pci_dev_read_resources(dev);
+
+ /* rpr6.2.(1). Write the Base Address Register (BAR) */
+ pci_write_config32(dev, 0xF8, 0x1); /* set IOAPIC's index as 1 and make sure no one changes it. */
+ pci_get_resource(dev, 0xFC); /* APIC located in sr5690 */
+
+ compact_resources(dev);
+}
+
+/* If IOAPIC's index changes, we should replace the pci_dev_set_resource(). */
+static void sr5690_set_resources(struct device *dev)
+{
+ pci_write_config32(dev, 0xF8, 0x1); /* set IOAPIC's index as 1 and make sure no one changes it. */
+ pci_dev_set_resources(dev);
+}
+
+static struct pci_operations lops_pci = {
+ .set_subsystem = pci_dev_set_subsystem,
+};
+
+static struct device_operations ht_ops = {
+ .read_resources = sr5690_read_resource,
+ .set_resources = sr5690_set_resources,
+ .enable_resources = pci_dev_enable_resources,
+ .init = pcie_init,
+ .scan_bus = 0,
+ .ops_pci = &lops_pci,
+};
+
+static const struct pci_driver ht_driver_sr5690 __pci_driver = {
+ .ops = &ht_ops,
+ .vendor = PCI_VENDOR_ID_ATI,
+ .device = PCI_DEVICE_ID_AMD_SR5690_HT,
+};
+
+static const struct pci_driver ht_driver_sr5670 __pci_driver = {
+ .ops = &ht_ops,
+ .vendor = PCI_VENDOR_ID_ATI,
+ .device = PCI_DEVICE_ID_AMD_SR5670_HT,
+};
+
+static const struct pci_driver ht_driver_sr5650 __pci_driver = {
+ .ops = &ht_ops,
+ .vendor = PCI_VENDOR_ID_ATI,
+ .device = PCI_DEVICE_ID_AMD_SR5650_HT,
+};
--- /dev/null
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include <delay.h>
+#include "sr5650.h"
+#include "cmn.h"
+
+/*------------------------------------------------
+* Global variable
+------------------------------------------------*/
+PCIE_CFG AtiPcieCfg = {
+ PCIE_ENABLE_STATIC_DEV_REMAP, /* Config */
+ 0, /* ResetReleaseDelay */
+ 0, /* Gfx0Width */
+ 0, /* Gfx1Width */
+ 0, /* GfxPayload */
+ 0, /* GppPayload */
+ 0, /* PortDetect, filled by GppSbInit */
+ 0, /* PortHp */
+ 0, /* DbgConfig */
+ 0, /* DbgConfig2 */
+ 0, /* GfxLx */
+ 0, /* GppLx */
+ 0, /* NBSBLx */
+ 0, /* PortSlotInit */
+ 0, /* Gfx0Pwr */
+ 0, /* Gfx1Pwr */
+ 0 /* GppPwr */
+};
+
+static void ValidatePortEn(device_t nb_dev);
+
+static void ValidatePortEn(device_t nb_dev)
+{
+}
+
+/*****************************************************************
+* Compliant with CIM_33's PCIEPowerOffGppPorts
+* Power off unused GPP lines
+*****************************************************************/
+static void PciePowerOffGppPorts(device_t nb_dev, device_t dev, u32 port)
+{
+ u32 reg;
+ u16 state_save;
+ struct southbridge_amd_sr5650_config *cfg =
+ (struct southbridge_amd_sr5650_config *)nb_dev->chip_info;
+ u16 state = cfg->port_enable;
+
+ if (!(AtiPcieCfg.Config & PCIE_DISABLE_HIDE_UNUSED_PORTS))
+ state &= AtiPcieCfg.PortDetect;
+ state = ~state;
+ state &= (1 << 4) + (1 << 5) + (1 << 6) + (1 << 7);
+ state_save = state << 17;
+ state &= !(AtiPcieCfg.PortHp);
+ reg = nbmisc_read_index(nb_dev, 0x0c);
+ reg |= state;
+ nbmisc_write_index(nb_dev, 0x0c, reg);
+
+ reg = nbmisc_read_index(nb_dev, 0x08);
+ reg |= state_save;
+ nbmisc_write_index(nb_dev, 0x08, reg);
+
+ if ((AtiPcieCfg.Config & PCIE_OFF_UNUSED_GPP_LANES)
+ && !(AtiPcieCfg.
+ Config & (PCIE_DISABLE_HIDE_UNUSED_PORTS +
+ PCIE_GFX_COMPLIANCE))) {
+ }
+ /* step 3 Power Down Control for Southbridge */
+ reg = nbpcie_p_read_index(dev, 0xa2);
+
+ switch ((reg >> 4) & 0x7) { /* get bit 4-6, LC_LINK_WIDTH_RD */
+ case 1:
+ nbpcie_ind_write_index(nb_dev, 0x65, 0x0e0e);
+ break;
+ case 2:
+ nbpcie_ind_write_index(nb_dev, 0x65, 0x0c0c);
+ break;
+ default:
+ break;
+ }
+}
+
+/**********************************************************************
+**********************************************************************/
+static void switching_gpp1_configurations(device_t nb_dev, device_t sb_dev)
+{
+ u32 reg;
+ struct southbridge_amd_sr5650_config *cfg =
+ (struct southbridge_amd_sr5650_config *)nb_dev->chip_info;
+
+ /* 4.3.3.1.1.1.step1. Asserts PCIE-GPP1 global reset */
+ reg = nbmisc_read_index(nb_dev, 0x8);
+ reg |= 1 << 15;
+ nbmisc_write_index(nb_dev, 0x8, reg);
+
+ /* 4.3.3.1.1.1.step2. De-asserts STRAP_BIF_all_valid for PCIE-GPP1 core */
+ reg = nbmisc_read_index(nb_dev, 0x26);
+ reg |= 1 << 28;
+ nbmisc_write_index(nb_dev, 0x26, reg);
+
+ /* 4.3.3.1.1.1.step3. Programs PCIE-GPP1 to be desired port configuration 8:8 or 16:0. */
+ reg = nbmisc_read_index(nb_dev, 0x8);
+ reg &= ~(1 << 8); /* clean */
+ reg |= cfg->gpp1_configuration << 8;
+ nbmisc_write_index(nb_dev, 0x8, reg);
+
+ /* 4.3.3.1.1.1.step4. Wait for 2ms */
+ mdelay(1);
+
+ /* 4.3.3.1.1.1.step5. Asserts STRAP_BIF_all_valid for PCIE-GPP1 core */
+ reg = nbmisc_read_index(nb_dev, 0x26);
+ reg &= ~(1 << 28);
+ nbmisc_write_index(nb_dev, 0x26, reg);
+
+ /* 4.3.3.1.1.1.step6. De-asserts PCIE-GPP1 global reset */
+ reg = nbmisc_read_index(nb_dev, 0x8);
+ reg &= ~(1 << 15);
+ nbmisc_write_index(nb_dev, 0x8, reg);
+
+ /* Follow the procedure for PCIE-GPP1 common initialization and
+ * link training sequence. */
+}
+
+/**********************************************************************
+**********************************************************************/
+static void switching_gpp2_configurations(device_t nb_dev, device_t sb_dev)
+{
+ u32 reg;
+ struct southbridge_amd_sr5650_config *cfg =
+ (struct southbridge_amd_sr5650_config *)nb_dev->chip_info;
+
+ /* 4.3.3.1.1.2.step1. Asserts PCIE-GPP2 global reset */
+ reg = nbmisc_read_index(nb_dev, 0x8);
+ reg |= 1 << 13;
+ nbmisc_write_index(nb_dev, 0x8, reg);
+
+ /* 4.3.3.1.1.2.step2. De-asserts STRAP_BIF_all_valid for PCIE-GPP2 core */
+ reg = nbmisc_read_index(nb_dev, 0x26);
+ reg |= 1 << 29;
+ nbmisc_write_index(nb_dev, 0x26, reg);
+
+ /* 4.3.3.1.1.2.step3. Programs PCIE-GPP2 to be desired port configuration 8:8 or 16:0. */
+ reg = nbmisc_read_index(nb_dev, 0x8);
+ reg &= ~(1 << 9); /* clean */
+ reg |= (cfg->gpp2_configuration & 1) << 9;
+ nbmisc_write_index(nb_dev, 0x8, reg);
+
+ /* 4.3.3.1.1.2.step4. Wait for 2ms */
+ mdelay(2);
+
+ /* 4.3.3.1.1.2.step5. Asserts STRAP_BIF_all_valid for PCIE-GPP2 core */
+ reg = nbmisc_read_index(nb_dev, 0x26);
+ reg &= ~(1 << 29);
+ nbmisc_write_index(nb_dev, 0x26, reg);
+
+ /* 4.3.3.1.1.2.step6. De-asserts PCIE-GPP2 global reset */
+ reg = nbmisc_read_index(nb_dev, 0x8);
+ reg &= ~(1 << 13);
+ nbmisc_write_index(nb_dev, 0x8, reg);
+
+ /* Follow the procedure for PCIE-GPP2 common initialization and
+ * link training sequence. */
+}
+static void switching_gpp3a_configurations(device_t nb_dev, device_t sb_dev)
+{
+ u32 reg;
+ struct southbridge_amd_sr5650_config *cfg =
+ (struct southbridge_amd_sr5650_config *)nb_dev->chip_info;
+
+ /* 4.3.3.2.3.2.step1. Asserts PCIE-GPP3a global reset. */
+ reg = nbmisc_read_index(nb_dev, 0x8);
+ reg |= 1 << 31;
+ nbmisc_write_index(nb_dev, 0x8, reg);
+ /* 4.3.3.2.3.2.step2. De-asserts STRAP_BIF_all_valid for PCIE-GPP3a core */
+ reg = nbmisc_read_index(nb_dev, 0x26);
+ reg |= 1 << 30;
+ nbmisc_write_index(nb_dev, 0x26, reg);
+ /* 4.3.3.2.3.2.step3. Programs the desired PCIE-GPP3a configuration. */
+ reg = nbmisc_read_index(nb_dev, 0x67);
+ reg &= ~0x1F; /* clean */
+ reg |= cfg->gpp3a_configuration;
+ nbmisc_write_index(nb_dev, 0x67, reg);
+ /* 4.3.3.2.3.2.step4. Programs PCIE-GPP3a Line Director. */
+ reg = nbmisc_read_index(nb_dev, 0x26);
+ reg &= 0xF0000000; /* TODO:Lane reversed. */
+ switch (cfg->gpp3a_configuration) {
+ case 0xB: /* 1:1:1:1:1:1 */
+ reg |= 0x2AA3554;
+ break;
+ case 0x1: /* 4:2:0:0:0:0 */
+ reg |= 0x055B000;
+ break;
+ case 0x2: /* 4:1:1:0:0:0 */
+ reg |= 0x215B400;
+ break;
+ case 0xC: /* 2:2:2:0:0:0 */
+ reg |= 0xFF0BAA0;
+ break;
+ case 0xA: /* 2:2:1:1:0:0 */
+ reg |= 0x215B400;
+ break;
+ case 0x4: /* 2:1:1:1:1:0 */
+ reg |= 0xFF0BAA0;
+ break;
+ default: /* shouldn't be here. */
+ printk(BIOS_DEBUG, "Warning:gpp3a_configuration is not correct. Check you devicetree.cb\n");
+ break;
+ }
+ nbmisc_write_index(nb_dev, 0x26, reg);
+ /* 4.3.3.2.3.2.step5. De-asserts STRAP_BIF_all_valid for PCIE-GPP3a core */
+ reg = nbmisc_read_index(nb_dev, 0x26);
+ reg &= ~(1 << 30);
+ nbmisc_write_index(nb_dev, 0x26, reg);
+ /* 4.3.3.2.3.2.step6. De-asserts PCIE-GPP3a global reset. */
+ reg = nbmisc_read_index(nb_dev, 0x8);
+ reg &= ~(1 << 31);
+ nbmisc_write_index(nb_dev, 0x8, reg);
+}
+
+/*****************************************************************
+* The sr5650 uses NBCONFIG:0x1c (BAR3) to map the PCIE Extended Configuration
+* Space to a 256MB range within the first 4GB of addressable memory.
+*****************************************************************/
+void enable_pcie_bar3(device_t nb_dev)
+{
+ printk(BIOS_DEBUG, "enable_pcie_bar3()\n");
+ set_nbcfg_enable_bits(nb_dev, 0x7C, 1 << 30, 1 << 30); /* Enables writes to the BAR3 register. */
+ set_nbcfg_enable_bits(nb_dev, 0x84, 7 << 16, 0 << 16);
+
+ pci_write_config32(nb_dev, 0x1C, EXT_CONF_BASE_ADDRESS); /* PCIEMiscInit */
+ pci_write_config32(nb_dev, 0x20, 0x00000000);
+ set_htiu_enable_bits(nb_dev, 0x32, 1 << 28, 1 << 28); /* PCIEMiscInit */
+ ProgK8TempMmioBase(1, EXT_CONF_BASE_ADDRESS, TEMP_MMIO_BASE_ADDRESS);
+}
+
+/*****************************************************************
+* We should disable bar3 when we want to exit sr5650_enable, because bar3 will be
+* remapped in set_resource later.
+*****************************************************************/
+void disable_pcie_bar3(device_t nb_dev)
+{
+ printk(BIOS_DEBUG, "disable_pcie_bar3()\n");
+ pci_write_config32(nb_dev, 0x1C, 0); /* clear BAR3 address */
+ set_nbcfg_enable_bits(nb_dev, 0x7C, 1 << 30, 0 << 30); /* Disable writes to the BAR3. */
+ ProgK8TempMmioBase(0, EXT_CONF_BASE_ADDRESS, TEMP_MMIO_BASE_ADDRESS);
+}
+
+/*
+*/
+void init_gen2(device_t nb_dev, device_t dev, u8 port)
+{
+ u32 reg, val;
+ /* for A11 (0x89 == 0) */
+ reg = 0x34;
+ if (port <= 3){
+ val = 1<<5;
+ }else{
+ val = 1<<31;
+ if (port >= 9 )
+ reg = 0x39;
+ }
+
+ /* todo: check for rev > a11
+ switch (port) {
+ case 2;
+ reg = 0x34;
+ val = 1<<5;
+ break;
+ case 3:
+ reg = 0x22;
+ val = 1<<6;
+ break;
+ case 4:
+ reg = 0x34;
+ val = 1<<31;
+ break;
+ case 5:
+ case 6:
+ reg = 0x39;
+ val = 1<<31;
+ break;
+ case 7..9:
+ reg = 0x37;
+ val = 1<<port;
+ break;
+ case 10:
+ reg = 0x22;
+ val = 1<<5;
+ break;
+ default:
+ reg = 0;
+ break;
+ }
+ */
+ set_pcie_enable_bits(dev, 0xA4, 0x1, 0x1);
+ pci_ext_write_config32(nb_dev, dev, 0x88, 0xF0, 1<<2); /* LINK_CRTL2*/
+ set_nbmisc_enable_bits(nb_dev, reg, val, val);
+}
+
+
+/* Alternative to default CPL buffer count */
+const u8 pGpp420000[] = {0x38, 0x1C};
+const u8 pGpp411000[] = {0x38, 0x0E, 0x0E};
+const u8 pGpp222000[] = {0x1C, 0x1C, 0x1C};
+const u8 pGpp221100[] = {0x1C, 0x1C, 0x0E, 0x0E};
+const u8 pGpp211110[] = {0x1C, 0x0E, 0x0E, 0x0E, 0, 0x0E, 0x0E};
+const u8 pGpp111111[] = {0x0E, 0x0E, 0x0E, 0x0E, 0, 0x0E, 0x0E};
+
+/*
+ * Enabling Dynamic Slave CPL Buffer Allocation Feature for PCIE-GPP3a Ports
+ * PcieLibCplBufferAllocation
+ */
+static void gpp3a_cpl_buf_alloc(device_t nb_dev, device_t dev)
+{
+ u8 dev_index;
+ u8 *slave_cpl;
+ u8 value;
+ struct southbridge_amd_sr5650_config *cfg =
+ (struct southbridge_amd_sr5650_config *)nb_dev->chip_info;
+
+ dev_index = dev->path.pci.devfn >> 3;
+ if (dev_index < 4 || dev_index > 0xa) {
+ return;
+ }
+
+ switch (cfg->gpp3a_configuration) {
+ case 0x1: /* 4:2:0:0:0:0 */
+ slave_cpl = (u8 *)&pGpp420000;
+ break;
+ case 0x2: /* 4:1:1:0:0:0 */
+ slave_cpl = (u8 *)&pGpp411000;
+ break;
+ case 0xC: /* 2:2:2:0:0:0 */
+ slave_cpl = (u8 *)&pGpp222000;
+ break;
+ case 0xA: /* 2:2:1:1:0:0 */
+ slave_cpl = (u8 *)&pGpp221100;
+ break;
+ case 0x4: /* 2:1:1:1:1:0 */
+ slave_cpl = (u8 *)&pGpp211110;
+ break;
+ case 0xB: /* 1:1:1:1:1:1 */
+ slave_cpl = (u8 *)&pGpp111111;
+ break;
+ default: /* shouldn't be here. */
+ printk(BIOS_DEBUG, "buggy gpp3a_configuration\n");
+ break;
+ }
+
+ value = slave_cpl[dev_index - 4];
+ if (value != 0) {
+ set_pcie_enable_bits(dev, 0x10, 0x3f << 8, value << 8);
+ set_pcie_enable_bits(dev, 0x20, 1 << 11, 1 << 11);
+ }
+}
+
+/*
+ * Enabling Dynamic Slave CPL Buffer Allocation Feature for PCIE-GPP1/PCIE-GPP2 Ports
+ * PcieLibCplBufferAllocation
+ */
+static void gpp12_cpl_buf_alloc(device_t nb_dev, device_t dev)
+{
+ u8 gpp_cfg;
+ u8 value;
+ u8 dev_index;
+
+ dev_index = dev->path.pci.devfn >> 3;
+ struct southbridge_amd_sr5650_config *cfg =
+ (struct southbridge_amd_sr5650_config *)nb_dev->chip_info;
+
+ if (dev_index < 4) {
+ gpp_cfg = cfg->gpp1_configuration;
+ } else if (dev_index > 0xa) {
+ gpp_cfg = cfg->gpp2_configuration;
+ } else {
+ return;
+ }
+
+ if (gpp_cfg == 0) {
+ /* Configuration 16:0, leave the default value */
+ } else if (gpp_cfg == 1) {
+ /* Configuration 8:8 */
+ value = 0x60;
+ set_pcie_enable_bits(dev, 0x10, 0x3f << 8, value << 8);
+ set_pcie_enable_bits(dev, 0x20, 1 << 11, 1 << 11);
+ } else {
+ printk(BIOS_DEBUG, "buggy gpp configuration\n");
+ }
+}
+
+#if 0 /* BTS report error without this function. But some board
+ * fail to boot. Leave it here for future debug. */
+
+/*
+ * Enable LCLK clock gating
+ */
+static void EnableLclkGating(device_t dev)
+{
+ u8 port;
+ u32 reg = 0;
+ u32 mask = 0;
+ u32 value = 0;
+ device_t nb_dev = dev_find_slot(0, 0);
+ device_t clk_f1= dev_find_slot(0, 1);
+
+ port = dev->path.pci.devfn >> 3;
+ switch (port) {
+ //PCIE_CORE_INDEX_GPP1
+ case 2:
+ case 3:
+ reg = 0x94;
+ mask = 1 << 16;
+ break;
+
+ //PCIE_CORE_INDEX_GPP2
+ case 11:
+ case 12:
+ reg = 0xE8;
+ value = 1 << 28;
+ break;
+
+ //PCIE_CORE_INDEX_GPP3a
+ case 4 ... 7:
+ case 9:
+ case 10:
+ reg = 0xE8;
+ value = 1 << 31;
+ break;
+
+ //PCIE_CORE_INDEX_GPP3b;
+ case 13:
+ reg = 0xE8;
+ value = 1 << 25;
+ break;
+
+ //PCIE_CORE_INDEX_SB;
+ case 8:
+ reg = 0x94;
+ mask = 1 << 24;
+ break;
+ default:
+ break;
+ }
+ /* enable access func1 */
+ set_nbcfg_enable_bits(nb_dev, 0x4C, 1 << 0, 1 << 0);
+ set_nbcfg_enable_bits(clk_f1, reg, mask, value);
+}
+#endif
+
+/*****************************************
+* Compliant with CIM_33's PCIEGPPInit
+* nb_dev:
+* root bridge struct
+* dev:
+* p2p bridge struct
+* port:
+* p2p bridge number, 4-10
+*****************************************/
+void sr5650_gpp_sb_init(device_t nb_dev, device_t dev, u32 port)
+{
+ u32 gpp_sb_sel = 0;
+ struct southbridge_amd_sr5650_config *cfg =
+ (struct southbridge_amd_sr5650_config *)nb_dev->chip_info;
+
+ printk(BIOS_DEBUG, "gpp_sb_init nb_dev=0x%p, dev=0x%p, port=0x%x\n", nb_dev, dev, port);
+ switch (port) {
+ case 2:
+ case 3:
+ gpp_sb_sel = PCIE_CORE_INDEX_GPP1;
+ break;
+ case 4 ... 7:
+ case 9:
+ case 10:
+ gpp_sb_sel = PCIE_CORE_INDEX_GPP3a;
+ break;
+ case 8:
+ gpp_sb_sel = PCIE_CORE_INDEX_SB;
+ break;
+ case 11:
+ case 12:
+ gpp_sb_sel = PCIE_CORE_INDEX_GPP2;
+ break;
+ case 13:
+ gpp_sb_sel = PCIE_CORE_INDEX_GPP3b;
+ break;
+ }
+
+ /* Init common Core registers */
+ set_pcie_enable_bits(dev, 0xB1, 1 << 28 | 1 << 23 | 1 << 20 | 1 << 19,
+ 1 << 28 | 1 << 23 | 1 << 20 | 1 << 19);
+ if (gpp_sb_sel == PCIE_CORE_INDEX_GPP3a) {
+ set_pcie_enable_bits(dev, 0xB1, 1 << 22, 1 << 22);
+ /* 4.3.3.2.3 Step 10: Dynamic Slave CPL Buffer Allocation */
+ gpp3a_cpl_buf_alloc(nb_dev, dev);
+ }
+ if (gpp_sb_sel == PCIE_CORE_INDEX_GPP1 || gpp_sb_sel == PCIE_CORE_INDEX_GPP2) {
+ gpp12_cpl_buf_alloc(nb_dev, dev);
+ }
+ set_pcie_enable_bits(dev, 0xA1, (1 << 26) | (1 << 24) | (1 << 11), 1 << 11);
+ set_pcie_enable_bits(dev, 0xA0, 0x0000FFF0, 0x6830);
+ // PCIE should not ignore malformed packet error or ATS request
+ set_pcie_enable_bits(dev, 0x70, 1 << 12, 0);
+ //Step 14.1: Advertising Hot Plug Capabilities
+ set_pcie_enable_bits(dev, 0x10, 1 << 4, 1 << 4); //Enable power fault
+
+ set_pcie_enable_bits(nb_dev, 0xC1 | gpp_sb_sel, 1 << 0, 1 << 0);
+
+ /* init GPP core */
+ /* 4.4.2.step13.1. Sets RCB completion timeout to be 200ms */
+ pci_ext_write_config32(nb_dev, dev, 0x80, 0xF << 0, 0x6 << 0);
+ /* 4.4.2.step13.2. RCB completion timeout on link down to shorten enumeration time. */
+ set_pcie_enable_bits(dev, 0x70, 1 << 19, 1 << 19);
+ /* 4.4.2.step13.3. Enable slave ordering rules */
+ set_pcie_enable_bits(nb_dev, 0x20 | gpp_sb_sel, 1 << 8, 0 << 8);
+ /* 4.4.2.step13.4. Sets DMA payload size to 64 bytes. */
+ set_pcie_enable_bits(nb_dev, 0x10 | gpp_sb_sel, 7 << 10, 4 << 10);
+ /* 4.4.2.step13.5. Set REGS_DLP_IGNORE_IN_L1_EN to ignore DLLPs
+ during L1 so that Tx Clk can be turned off. */
+ set_pcie_enable_bits(nb_dev, 0x02 | gpp_sb_sel, 1 << 0 | 1 << 8, 1 << 0 | 1 << 8); // add bit 8 from CIMx
+ /* 4.4.2.step13.6. Set REGS_LC_ALLOW_TX_L1_CONTROL to allow TX to
+ prevent LC from going to L1 when there are outstanding completions.*/
+ set_pcie_enable_bits(dev, 0x02, 1 << 15, 1 << 15);
+ /* 4.4.2.step13.7. Set REGS_LC_DONT_GO_TO_L0S_IF_L1_ARMED to prevent
+ lc to go to from L0 to Rcv_L0s if L1 is armed. */
+ set_pcie_enable_bits(dev, 0xA1, 1 << 11, 1 << 11);
+ /* 4.4.2.step13.8. CMGOOD_OVERRIDE for all five PCIe cores. */
+ set_nbmisc_enable_bits(nb_dev, 0x22, 1 << 27, 1 << 27);
+ /* 4.4.2.step13.9. Prevents Electrical Idle from causing a
+ transition from Rcv_L0 to Rcv_L0s. */
+ set_pcie_enable_bits(dev, 0xB1, 1 << 20, 1 << 20);
+ /* 4.4.2.step13.10. Prevents the LTSSM from going to Rcv_L0s if
+ it has already acknowledged a request to go
+ to L1 but it has not transitioned there yet. */
+ /* seems the same as step13.7 */
+ set_pcie_enable_bits(dev, 0xA1, 1 << 11, 1 << 11);
+ /* 4.4.2.step13.11. Transmits FTS before Recovery. */
+ set_pcie_enable_bits(dev, 0xA3, 1 << 9, 1 << 9);
+ /* 4.4.2.step13.12. Sets TX arbitration algorithm to round robin
+ for PCIE-GPP1, PCIE-GPP2, PCIE-GPP3a and PCIE-GPP3b cores only. */
+ //if (gpp_sb_sel != PCIE_CORE_INDEX_SB) /* RPR NOT set SB_CORE, BTS set SB_CORE, we comply with BTS */
+ set_pcie_enable_bits(nb_dev, 0x1C | gpp_sb_sel, 0x7FF, 0x109);
+ /* 4.4.2.step13.13. Sets number of TX Clocks to drain TX Pipe to 0x3.*/
+ set_pcie_enable_bits(dev, 0xA0, 0xF << 4, 0x3 << 4);
+ /* 4.4.2.step13.14. Lets PI use Electrical Idle from PHY when
+ turning off PLL in L1 at Gen 2 speed instead of Inferred Electrical
+ Idle.
+ NOTE: LC still uses Inferred Electrical Idle. */
+ set_pcie_enable_bits(nb_dev, 0x40 | gpp_sb_sel, 3 << 14, 2 << 14);
+ /* 4.4.2.step13.15. Turn on rx_fronten_en for all active lanes upon
+ exit from Electrical Idle, rather than being tied to PLL_PDNB. */
+ set_pcie_enable_bits(nb_dev, 0xC2 | gpp_sb_sel, 1 << 25, 1 << 25);
+
+ /* 4.4.2.step13.16. Advertises TX L0s and L1 exit latency.
+ TX L0s exit latency to be 100b: 512ns to less than 1us;
+ L1 exit latency to be 011b: 4us to less than 8us.
+ For Hot-Plug Slots: Advertise TX L0s and L1 exit latency.
+ TX L0s exit latency to be 110b: 2us to 4us.
+ L1 exit latency to be 111b: more than 64us.*/
+ //set_pcie_enable_bits(dev, 0xC1, 0xF << 0, 0xC << 0); /* 0xF for htplg. */
+ set_pcie_enable_bits(dev, 0xC1, 0xF << 0, 0xF << 0); /* 0xF for htplg. */
+ /* 4.4.2.step13.17. Always ACK an ASPM L1 entry DLLP to
+ workaround credit control issue on PM_NAK
+ message of SB700 and SB800. */
+ /* 4.4.4.step13.18. To allow advertising Gen 2 capabilities to Southbridge. */
+ if (port == 8) {
+ set_pcie_enable_bits(dev, 0xA0, 1 << 23, 1 << 23);
+ set_pcie_enable_bits(nb_dev, 0xC1 | gpp_sb_sel, 1 << 1, 1 << 1);
+ }
+ /* 4.4.2.step13.19. CMOS Option (Gen 2 AUTO-Part 1 - Enabled by Default) */
+ /* 4.4.2.step13.20. CMOS Option (RC Advertised Gen 2-Part1 - Disabled by Default)*/
+ set_nbcfg_enable_bits(dev, 0x88, 0xF << 0, 0x2 << 0);
+ /* Disables GEN2 capability of the device.
+ * RPR typo- it says enable but the bit setting says disable.
+ * Disable it here and we enable it later. */
+ set_pcie_enable_bits(dev, 0xA4, 1 << 0, 1 << 0);
+ /* 4.4.2.step13.21. */
+ /* 4.4.2.step13.22 */
+ /* Enable native PME. */
+ set_pcie_enable_bits(dev, 0x10, 1 << 3, 1 < 3);
+ /* This bit when set indicates that the PCIe Link associated with this port
+ is connected to a slot. */
+ pci_ext_write_config32(nb_dev, dev, 0x5a, 1 << 8, 1 << 8);
+ /* This bit when set indicates that this slot is capable of supporting
+ Hot-Plug operations. */
+ set_nbcfg_enable_bits(dev, 0x6C, 1 << 6, 1 << 6);
+ /* Enables flushing of TLPs when Data Link is down. */
+ set_pcie_enable_bits(dev, 0x20, 1 << 19, 0 << 19);
+
+ /* 4.4.2.step14. Server Class Hot Plug Feature */
+ /* 4.4.2 step14.1: Advertising Hot Plug Capabilities */
+ /* 4.4.2.step14.2: Firmware Upload */
+ /* 4.4.2.Step14.3: SBIOS Acknowledgment to Firmware of Successful Firmware Upload */
+ /* step14.4 */
+ /* step14.5 */
+ /* skip */
+
+ /* CIMx LPC Deadlock workaround - Enable Memory Write Map*/
+ if (gpp_sb_sel == PCIE_CORE_INDEX_SB) {
+ set_pcie_enable_bits(nb_dev, 0x10 | gpp_sb_sel, 1 << 9, 1 << 9);
+ set_htiu_enable_bits(nb_dev, 0x06, 1 << 26, 1 << 26);
+ }
+
+ /* This CPL setup requires more than this one register and should be done in gpp_core.
+ * The additional setup is for the different revisions. */
+
+ /* CIMx CommonPortInit settings that are not set above. */
+ pci_ext_write_config32(nb_dev, dev, 0x88, 0xF0, 1 << 0); /* LINK_CRTL2 */
+
+ if ( port == 8 )
+ set_pcie_enable_bits(dev, 0xA0, 0, 1 << 23);
+
+ /* set automatic Gen2 support, needs mainboard config option as Gen2 can cause issues on some platforms. */
+ init_gen2(nb_dev, dev, port);
+ set_pcie_enable_bits(dev, 0xA4, 1 << 29, 1 << 29);
+ set_pcie_enable_bits(dev, 0xC0, 1 << 15, 0);
+ set_pcie_enable_bits(dev, 0xA2, 1 << 13, 0);
+
+ /* Hotplug Support - bit5 + bit6 capable and surprise */
+ pci_ext_write_config32(nb_dev, dev, 0x6c, 0x60, 0x60);
+
+ /* Set interrupt pin info 0x3d */
+ pci_ext_write_config32(nb_dev, dev, 0x3c, 1 << 8, 1 << 8);
+
+ /* 5.12.9.3 Hotplug step 1 - NB_PCIE_ROOT_CTRL - enable pm irq
+ The RPR is wrong - this is not a PCIEND_P register */
+ pci_ext_write_config32(nb_dev, dev, 0x74, 1 << 3, 1 << 3);
+
+ /* 5.12.9.3 step 2 - PCIEP_PORT_CNTL - enable hotplug messages */
+ if ( port != 8)
+ set_pcie_enable_bits(dev, 0x10, 1 << 2, 1 << 2);
+
+ /* Not sure about this PME setup */
+ /* Native PME */
+ set_pcie_enable_bits(dev, 0x10, 1 << 3, 1 << 3); /* Not set in CIMx */
+
+ /* PME Enable */
+ pci_ext_write_config32(nb_dev, dev, 0x54, 1 << 8, 1 << 8); /* Not in CIMx */
+
+ /* 4.4.3 Training for GPP devices */
+ /* init GPP */
+ switch (port) {
+ case 2:
+ case 3:
+ case 4: /* GPP_SB */
+ case 5:
+ case 6:
+ case 7:
+ case 9: /*GPP*/
+ case 10:
+ case 11:
+ case 12:
+ case 13:
+ /* 4.4.2.step13.5. Blocks DMA traffic during C3 state */
+ set_pcie_enable_bits(dev, 0x10, 1 << 0, 0 << 0);
+ /* Enabels TLP flushing */
+ set_pcie_enable_bits(dev, 0x20, 1 << 19, 0 << 19);
+
+ /* check port enable */
+ if (cfg->port_enable & (1 << port)) {
+ PcieReleasePortTraining(nb_dev, dev, port);
+ if (!(AtiPcieCfg.Config & PCIE_GPP_COMPLIANCE)) {
+ u8 res = PcieTrainPort(nb_dev, dev, port);
+ printk(BIOS_DEBUG, "PcieTrainPort port=0x%x result=%d\n", port, res);
+ if (res) {
+ AtiPcieCfg.PortDetect |= 1 << port;
+ }
+ }
+ }
+ break;
+ case 8: /* SB */
+ break;
+ default:
+ break;
+ }
+
+ /* Re-enable RC ordering logic after training (from CIMx)*/
+ set_pcie_enable_bits(nb_dev, 0x20 | gpp_sb_sel, 1 << 9, 0);
+
+ /* Advertising Hot Plug Capabilities */
+ pci_ext_write_config32(nb_dev, dev, 0x6c, 0x04001B, 0x00001B);
+
+ /* PCIE Late Init (CIMx late init - Maybe move somewhere else? Later in the coreboot PCI device enum?) */
+ /* Set Slot Number */
+ pci_ext_write_config32(nb_dev, dev, 0x6c, 0x1FFF << 19, port << 19);
+
+ /* Set Slot present 0x5A*/
+ pci_ext_write_config32(nb_dev, dev, 0x58, 1 << 24, 1 << 24);
+
+ //PCIE-GPP1 TXCLK Clock Gating In L1 Late Core sttting - Maybe move somewhere else? */
+ set_pcie_enable_bits(nb_dev, 0x11 | gpp_sb_sel, 0xF << 0, 0x0C << 0);
+ /* Enable powering down PLLs in L1 or L23 Ready states.
+ * Turns off PHY`s RX FRONTEND during L1 when PLL power down is enabled */
+ set_pcie_enable_bits(nb_dev, 0x40 | gpp_sb_sel, 0x1219, 0x1009);
+ /* 4.4..7.1 TXCLK Gating in L1, Enables powering down TXCLK clock pads on the receive side. */
+ set_pcie_enable_bits(nb_dev, 0x40 | gpp_sb_sel, 1 << 6, 1 << 6);
+
+ /* Step 21: Register Locking PCIE Misc. Late Core sttting - Must move somewhere do PciInitLate FIXME */
+ /* Lock HWInit Register */
+ //set_pcie_enable_bits(nb_dev, 0x10 | gpp_sb_sel, 1 << 0, 1 << 0);
+
+ /* Step 27: LCLK Gating */
+ //EnableLclkGating(dev);
+
+ /* Set Common Clock */
+ /* If dev present, set PcieCapPtr+0x10, BIT6);
+ * set dev 0x68,bit 6
+ * retrain link, set dev, 0x68 bit 5;
+ * wait dev 0x6B bit3 clear
+ */
+
+ if (port == 8){
+ PciePowerOffGppPorts(nb_dev, dev, port); /* , This should be run for all ports that are not hotplug and don't detect devices */
+ }
+}
+
+/*****************************************
+* Compliant with CIM_33's PCIEConfigureGPPCore
+*****************************************/
+void config_gpp_core(device_t nb_dev, device_t sb_dev)
+{
+ u32 reg;
+ struct southbridge_amd_sr5650_config *cfg =
+ (struct southbridge_amd_sr5650_config *)nb_dev->chip_info;
+
+ reg = nbmisc_read_index(nb_dev, 0x20);
+ if (AtiPcieCfg.Config & PCIE_ENABLE_STATIC_DEV_REMAP)
+ reg &= 0xfffffffd; /* set bit1 = 0 */
+ else
+ reg |= 0x2; /* set bit1 = 1 */
+ nbmisc_write_index(nb_dev, 0x20, reg);
+
+ /* Must perform PCIE-GPP1, GPP2, GPP3a global reset anyway */
+ reg = nbmisc_read_index(nb_dev, 0x8);
+ reg |= (1 << 31) | (1 << 15) | (1 << 13); //asserts
+ nbmisc_write_index(nb_dev, 0x8, reg);
+ reg &= ~((1 << 31) | (1 << 15) | (1 << 13)); //De-aserts
+ nbmisc_write_index(nb_dev, 0x8, reg);
+
+ reg = nbmisc_read_index(nb_dev, 0x67); /* get STRAP_BIF_LINK_CONFIG at bit 0-4 */
+ if (cfg->gpp3a_configuration != (reg & 0x1F))
+ switching_gpp3a_configurations(nb_dev, sb_dev);
+ reg = nbmisc_read_index(nb_dev, 0x8); /* get MULTIPORT_CONFIG_GPP1 MULTIPORT_CONFIG_CONFIG_GPP2 at bit 8,9 */
+ if ((cfg->gpp1_configuration << 8) != (reg & (1 << 8)))
+ switching_gpp1_configurations(nb_dev, sb_dev);
+ if ((cfg->gpp2_configuration << 9) != (reg & (1 << 9)))
+ switching_gpp2_configurations(nb_dev, sb_dev);
+ ValidatePortEn(nb_dev);
+}
+
+/*****************************************
+* Compliant with CIM_33's PCIEMiscClkProg
+*****************************************/
+void pcie_config_misc_clk(device_t nb_dev)
+{
+ u32 reg;
+ //struct bus pbus; /* fake bus for dev0 fun1 */
+
+ reg = pci_read_config32(nb_dev, 0x4c);
+ reg |= 1 << 0;
+ pci_write_config32(nb_dev, 0x4c, reg);
+
+#if 0 /* TODO: Check the mics clock later. */
+ if (AtiPcieCfg.Config & PCIE_GFX_CLK_GATING) {
+ /* TXCLK Clock Gating */
+ set_nbmisc_enable_bits(nb_dev, 0x07, 3 << 0, 3 << 0);
+ set_nbmisc_enable_bits(nb_dev, 0x07, 1 << 22, 1 << 22);
+ set_pcie_enable_bits(nb_dev, 0x11 | PCIE_CORE_INDEX_GFX, (3 << 6) | (~0xf), 3 << 6);
+
+ /* LCLK Clock Gating */
+ reg = pci_cf8_conf1.read32(&pbus, 0, 1, 0x94);
+ reg &= ~(1 << 16);
+ pci_cf8_conf1.write32(&pbus, 0, 1, 0x94, reg);
+ }
+
+ if (AtiPcieCfg.Config & PCIE_GPP_CLK_GATING) {
+ /* TXCLK Clock Gating */
+ set_nbmisc_enable_bits(nb_dev, 0x07, 3 << 4, 3 << 4);
+ set_nbmisc_enable_bits(nb_dev, 0x07, 1 << 22, 1 << 22);
+ set_pcie_enable_bits(nb_dev, 0x11 | PCIE_CORE_INDEX_SB, (3 << 6) | (~0xf), 3 << 6);
+
+ /* LCLK Clock Gating */
+ reg = pci_cf8_conf1.read32(&pbus, 0, 1, 0x94);
+ reg &= ~(1 << 24);
+ pci_cf8_conf1.write32(&pbus, 0, 1, 0x94, reg);
+ }
+#endif
+
+ reg = pci_read_config32(nb_dev, 0x4c);
+ reg &= ~(1 << 0);
+ pci_write_config32(nb_dev, 0x4c, reg);
+}
--- /dev/null
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef __SR5650_REV_H__
+#define __SR5650_REV_H__
+
+#define REV_SR5650_A11 0
+#define REV_SR5650_A12 1
+#define REV_SR5650_A21 2
+
+#endif /* __SR5650_REV_H__ */
--- /dev/null
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <arch/io.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include <cpu/x86/msr.h>
+#include <cpu/amd/mtrr.h>
+#include <delay.h>
+#include "sr5650.h"
+#include "cmn.h"
+
+/*
+ * extern function declaration
+ */
+extern void set_pcie_dereset(void);
+extern void set_pcie_reset(void);
+
+/* extension registers */
+u32 pci_ext_read_config32(device_t nb_dev, device_t dev, u32 reg)
+{
+ /*get BAR3 base address for nbcfg0x1c */
+ u32 addr = pci_read_config32(nb_dev, 0x1c) & ~0xF;
+ printk(BIOS_DEBUG, "addr=%x,bus=%x,devfn=%x\n", addr, dev->bus->secondary,
+ dev->path.pci.devfn);
+ addr |= dev->bus->secondary << 20 | /* bus num */
+ dev->path.pci.devfn << 12 | reg;
+ return *((u32 *) addr);
+}
+
+void pci_ext_write_config32(device_t nb_dev, device_t dev, u32 reg_pos, u32 mask, u32 val)
+{
+ u32 reg_old, reg;
+
+ /*get BAR3 base address for nbcfg0x1c */
+ u32 addr = pci_read_config32(nb_dev, 0x1c) & ~0xF;
+ /*printk(BIOS_DEBUG, "write: addr=%x,bus=%x,devfn=%x\n", addr, dev->bus->secondary,
+ dev->path.pci.devfn);*/
+ addr |= dev->bus->secondary << 20 | /* bus num */
+ dev->path.pci.devfn << 12 | reg_pos;
+
+ reg = reg_old = *((u32 *) addr);
+ reg &= ~mask;
+ reg |= val;
+ if (reg != reg_old) {
+ *((u32 *) addr) = reg;
+ }
+}
+
+u32 nbpcie_p_read_index(device_t dev, u32 index)
+{
+ return nb_read_index((dev), NBPCIE_INDEX, (index));
+}
+
+void nbpcie_p_write_index(device_t dev, u32 index, u32 data)
+{
+ nb_write_index((dev), NBPCIE_INDEX, (index), (data));
+}
+
+u32 nbpcie_ind_read_index(device_t nb_dev, u32 index)
+{
+ return nb_read_index((nb_dev), NBPCIE_INDEX, (index));
+}
+
+void nbpcie_ind_write_index(device_t nb_dev, u32 index, u32 data)
+{
+ nb_write_index((nb_dev), NBPCIE_INDEX, (index), (data));
+}
+
+/***********************************************************
+* To access bar3 we need to program PCI MMIO 7 in K8.
+* in_out:
+* 1: enable/enter k8 temp mmio base
+* 0: disable/restore
+***********************************************************/
+void ProgK8TempMmioBase(u8 in_out, u32 pcie_base_add, u32 mmio_base_add)
+{
+ /* K8 Function1 is address map */
+ device_t k8_f1;
+ device_t np = dev_find_slot(0, PCI_DEVFN(0x19, 1));
+ u16 node;
+
+ for (node = 0; node < CONFIG_MAX_PHYSICAL_CPUS; node++) {
+ k8_f1 = dev_find_slot(0, PCI_DEVFN(0x18 + node, 1));
+ if (!k8_f1) {
+ break;
+ }
+
+ if (in_out) {
+ /* Fill MMIO limit/base pair. */
+ pci_write_config32(k8_f1, 0xbc,
+ (((pcie_base_add + 0x10000000 -
+ 1) >> 8) & 0xffffff00) | 0x8 | (np ? 2 << 4 : 0 << 4));
+ pci_write_config32(k8_f1, 0xb8, (pcie_base_add >> 8) | 0x3);
+ pci_write_config32(k8_f1, 0xb4,
+ ((mmio_base_add + 0x10000000 -
+ 1) >> 8) | (np ? 2 << 4 : 0 << 4));
+ pci_write_config32(k8_f1, 0xb0, (mmio_base_add >> 8) | 0x3);
+ } else {
+ pci_write_config32(k8_f1, 0xb8, 0);
+ pci_write_config32(k8_f1, 0xbc, 0);
+ pci_write_config32(k8_f1, 0xb0, 0);
+ pci_write_config32(k8_f1, 0xb4, 0);
+ }
+ }
+}
+
+void PcieReleasePortTraining(device_t nb_dev, device_t dev, u32 port)
+{
+ switch (port) {
+ case 2: /* GPP1, bit4-5 */
+ case 3:
+ set_nbmisc_enable_bits(nb_dev, PCIE_LINK_CFG,
+ 1 << (port + 2), 0 << (port + 2));
+ break;
+ case 4: /* GPP3a, bit20-24 */
+ case 5:
+ case 6:
+ case 7:
+ set_nbmisc_enable_bits(nb_dev, PCIE_LINK_CFG,
+ 1 << (port + 17), 0 << (port + 17));
+ break;
+ case 9: /* GPP3a, bit25,26 */
+ case 10:
+ set_nbmisc_enable_bits(nb_dev, PCIE_LINK_CFG,
+ 1 << (port + 16), 0 << (port + 16));
+ break;
+ case 11: /* GPP2, bit6-7 */
+ case 12:
+ set_nbmisc_enable_bits(nb_dev, PCIE_LINK_CFG,
+ 1 << (port - 5), 0 << (port - 5));
+ break;
+ case 13: /* GPP3b, bit4 of NBMISCIND:0x2A */
+ set_nbmisc_enable_bits(nb_dev, 0x2A,
+ 1 << 4, 0 << 4);
+ break;
+ }
+}
+
+/********************************************************************************************************
+* Output:
+* 0: no device is present.
+* 1: device is present and is trained.
+********************************************************************************************************/
+u8 PcieTrainPort(device_t nb_dev, device_t dev, u32 port)
+{
+ u16 count = 5000;
+ u32 lc_state, reg, current_link_width, lane_mask;
+ u8 current, res = 0;
+ u32 gpp_sb_sel = 0;
+
+ switch (port) {
+ case 2:
+ case 3:
+ gpp_sb_sel = PCIE_CORE_INDEX_GPP1;
+ break;
+ case 4 ... 7:
+ case 9:
+ case 10:
+ gpp_sb_sel = PCIE_CORE_INDEX_GPP3a;
+ break;
+ case 11:
+ case 12:
+ gpp_sb_sel = PCIE_CORE_INDEX_GPP2;
+ break;
+ case 13:
+ gpp_sb_sel = PCIE_CORE_INDEX_GPP3b;
+ break;
+ }
+
+ while (count--) {
+ udelay(40200);
+ lc_state = nbpcie_p_read_index(dev, 0xa5); /* lc_state */
+ printk(BIOS_DEBUG, "PcieLinkTraining port=%x:lc current state=%x\n",
+ port, lc_state);
+ current = lc_state & 0x3f; /* get LC_CURRENT_STATE, bit0-5 */
+
+ switch (current) {
+ /* 0x00-0x04 means no device is present */
+ case 0x06:
+ /* read back current link width [6:4]. */
+ current_link_width = (nbpcie_p_read_index(dev, 0xA2) >> 4) & 0x7;
+ /* 4 means 7:4 and 15:12
+ * 3 means 7:2 and 15:10
+ * 2 means 7:1 and 15:9
+ * egnoring the reversal case
+ */
+ lane_mask = (0xFF << (current_link_width - 2) * 2) & 0xFF;
+ reg = nbpcie_ind_read_index(nb_dev, 0x65 | gpp_sb_sel);
+ reg |= lane_mask << 8 | lane_mask;
+ /* NOTE: See the comments in rs780_pcie.c
+ * switching_gppsb_configurations
+ * In CIMx 4.5.0 and RPR, 4c is done before 5 & 6.
+ * But in this way, a x4 device in port B (dev 4) of
+ * Configuration B can only be detected as x1, instead
+ * of x4. When the port B is being trained, the
+ * LC_CURRENT_STATE is 6 and the LC_LINK_WIDTH_RD is 1.
+ * We have to set the PCIEIND:0x65 as 0xE0E0 and reset
+ * the slot. Then the card seems to work in x1 mode.
+ */
+ reg = 0xE0E0; /*I think that the lane_mask calc above is wrong, and this can't be hardcoded because the configuration changes.*/
+ nbpcie_ind_write_index(nb_dev, 0x65 | gpp_sb_sel, reg);
+ printk(BIOS_DEBUG, "link_width=%x, lane_mask=%x",
+ current_link_width, lane_mask);
+ set_pcie_reset();
+ mdelay(1);
+ set_pcie_dereset();
+ break;
+ case 0x07: /* device is in compliance state (training sequence is done). Move to train the next device */
+ res = 1;
+ count = 0;
+ break;
+ case 0x10:
+ reg =
+ pci_ext_read_config32(nb_dev, dev,
+ PCIE_VC0_RESOURCE_STATUS);
+ printk(BIOS_DEBUG, "PcieTrainPort reg=0x%x\n", reg);
+ /* check bit1 */
+ if (reg & VC_NEGOTIATION_PENDING) { /* bit1=1 means the link needs to be re-trained. */
+ /* set bit8=1, bit0-2=bit4-6 */
+ u32 tmp;
+ reg =
+ nbpcie_p_read_index(dev,
+ PCIE_LC_LINK_WIDTH);
+ tmp = (reg >> 4) && 0x3; /* get bit4-6 */
+ reg &= 0xfff8; /* clear bit0-2 */
+ reg += tmp; /* merge */
+ reg |= 1 << 8;
+ count++; /* CIM said "keep in loop"? */
+ } else {
+ res = 1;
+ count = 0;
+ }
+ break;
+ default:
+ /* CIMx Unknown Workaround - There is a device that won't train. Try to reset it. */
+ /* if there are no device resets and nothing works, CIMx does a cf9 system reset (yikes!) */
+ set_pcie_reset();
+ mdelay(1);
+ set_pcie_dereset();
+ res = 0;
+ count = 0; /* break loop */
+ break;
+ }
+ }
+ return res;
+}
+
+/*
+* Compliant with CIM_33's ATINB_SetToms.
+* Set Top Of Memory below and above 4G.
+*/
+void sr5650_set_tom(device_t nb_dev)
+{
+ extern u64 uma_memory_base;
+
+ /* set TOM */
+ pci_write_config32(nb_dev, 0x90, uma_memory_base);
+}
+
+u32 get_vid_did(device_t dev)
+{
+ return pci_read_config32(dev, 0);
+}
+
+void sr5650_nb_pci_table(device_t nb_dev)
+{ /* NBPOR_InitPOR function. */
+ u8 temp8;
+ u16 temp16;
+ u32 temp32;
+
+ /* Program NB PCI table. */
+ temp16 = pci_read_config16(nb_dev, 0x04);
+ printk(BIOS_DEBUG, "NB_PCI_REG04 = %x.\n", temp16);
+ temp32 = pci_read_config32(nb_dev, 0x84);
+ printk(BIOS_DEBUG, "NB_PCI_REG84 = %x.\n", temp32);
+ //Reg4Ch[1]=1 (APIC_ENABLE) force cpu request with address 0xFECx_xxxx to south-bridge
+ //Reg4Ch[6]=1 (BMMsgEn) enable BM_Set message generation
+ pci_write_config8(nb_dev, 0x4c, 0x42);
+ temp8 = pci_read_config8(nb_dev, 0x4e);
+ temp8 |= 0x05; /* BAR1_ENABLE */
+ pci_write_config8(nb_dev, 0x4e, temp8);
+
+ temp32 = pci_read_config32(nb_dev, 0x4c);
+ printk(BIOS_DEBUG, "NB_PCI_REG4C = %x.\n", temp32);
+
+ /* disable GFX debug. */
+ temp8 = pci_read_config8(nb_dev, 0x8d);
+ temp8 &= ~(1<<1);
+ pci_write_config8(nb_dev, 0x8d, temp8);
+
+ /* set temporary NB TOM to 0x40000000. */
+ sr5650_set_tom(nb_dev);
+
+ /* Program NB HTIU table. */
+ //set_htiu_enable_bits(nb_dev, 0x05, 1<<10 | 1<<9, 1<<10|1<<9);
+ set_htiu_enable_bits(nb_dev, 0x06, 1, 0x4203a202);
+ //set_htiu_enable_bits(nb_dev, 0x07, 1<<1 | 1<<2, 0x8001);
+ set_htiu_enable_bits(nb_dev, 0x15, 0, 1<<31 | 1<<30 | 1<<27);
+ set_htiu_enable_bits(nb_dev, 0x1c, 0, 0xfffe0000);
+ set_htiu_enable_bits(nb_dev, 0x0c, 0x3f, 1 | 1<<3);
+ set_htiu_enable_bits(nb_dev, 0x19, 0xfffff+(1<<31), 0x186a0+(1<<31));
+ set_htiu_enable_bits(nb_dev, 0x16, 0x3f<<10, 0x7<<10);
+ set_htiu_enable_bits(nb_dev, 0x23, 0, 1<<28);
+}
+
+/***********************************************
+* 0:00.0 NBCFG :
+* 0:00.1 CLK : bit 0 of nb_cfg 0x4c : 0 - disable, default
+* 0:01.0 P2P Internal:
+* 0:02.0 P2P : bit 2 of nbmiscind 0x0c : 0 - enable, default + 32 * 2
+* 0:03.0 P2P : bit 3 of nbmiscind 0x0c : 0 - enable, default + 32 * 2
+* 0:04.0 P2P : bit 4 of nbmiscind 0x0c : 0 - enable, default + 32 * 2
+* 0:05.0 P2P : bit 5 of nbmiscind 0x0c : 0 - enable, default + 32 * 2
+* 0:06.0 P2P : bit 6 of nbmiscind 0x0c : 0 - enable, default + 32 * 2
+* 0:07.0 P2P : bit 7 of nbmiscind 0x0c : 0 - enable, default + 32 * 2
+* 0:08.0 NB2SB : bit 6 of nbmiscind 0x00 : 0 - disable, default + 32 * 1
+* case 0 will be called twice, one is by cpu in hypertransport.c line458,
+* the other is by sr5650.
+***********************************************/
+void sr5650_enable(device_t dev)
+{
+ device_t nb_dev = 0, sb_dev = 0;
+ int dev_ind;
+
+ printk(BIOS_INFO, "sr5650_enable: dev=%p, VID_DID=0x%x\n", dev, get_vid_did(dev));
+ nb_dev = dev_find_slot(0, PCI_DEVFN(0, 0));
+ if (!nb_dev) {
+ die("sr5650_enable: CAN NOT FIND SR5650 DEVICE, HALT!\n");
+ /* NOT REACHED */
+ }
+
+ /* sb_dev (dev 8) is a bridge that links to southbridge. */
+ sb_dev = dev_find_slot(0, PCI_DEVFN(8, 0));
+ if (!sb_dev) {
+ die("sr5650_enable: CAN NOT FIND SB bridge, HALT!\n");
+ /* NOT REACHED */
+ }
+
+ dev_ind = dev->path.pci.devfn >> 3;
+ switch (dev_ind) {
+ case 0: /* bus0, dev0, fun0; */
+ printk(BIOS_INFO, "Bus-0, Dev-0, Fun-0.\n");
+ enable_pcie_bar3(nb_dev); /* PCIEMiscInit */
+
+ config_gpp_core(nb_dev, sb_dev);
+ sr5650_gpp_sb_init(nb_dev, sb_dev, 8);
+
+ sr5650_nb_pci_table(nb_dev);
+ break;
+
+ case 2: /* bus0, dev2,3 GPP1 */
+ case 3:
+ printk(BIOS_INFO, "Bus-0, Dev-2,3, Fun-0. enable=%d\n", dev->enabled);
+ set_nbmisc_enable_bits(nb_dev, 0x0c, 1 << dev_ind,
+ (dev->enabled ? 0 : 1) << dev_ind);
+ if (dev->enabled)
+ sr5650_gpp_sb_init(nb_dev, dev, dev_ind); /* Note, dev 2,3 are generic PCIe ports. */
+ break;
+ case 4: /* bus0, dev4-7, four GPP3a */
+ case 5:
+ case 6:
+ case 7:
+ enable_pcie_bar3(nb_dev); /* PCIEMiscInit */
+ printk(BIOS_INFO, "Bus-0, Dev-4,5,6,7, Fun-0. enable=%d\n",
+ dev->enabled);
+ set_nbmisc_enable_bits(nb_dev, 0x0c, 1 << dev_ind,
+ (dev->enabled ? 0 : 1) << dev_ind);
+ if (dev->enabled)
+ sr5650_gpp_sb_init(nb_dev, dev, dev_ind);
+ break;
+ case 8: /* bus0, dev8, SB */
+ printk(BIOS_INFO, "Bus-0, Dev-8, Fun-0. enable=%d\n", dev->enabled);
+ set_nbmisc_enable_bits(nb_dev, 0x00, 1 << 6,
+ (dev->enabled ? 1 : 0) << 6);
+ if (dev->enabled)
+ sr5650_gpp_sb_init(nb_dev, dev, dev_ind);
+ disable_pcie_bar3(nb_dev);
+ break;
+ case 9: /* bus 0, dev 9,10, GPP3a */
+ case 10:
+ printk(BIOS_INFO, "Bus-0, Dev-9, 10, Fun-0. enable=%d\n",
+ dev->enabled);
+ enable_pcie_bar3(nb_dev); /* PCIEMiscInit */
+ set_nbmisc_enable_bits(nb_dev, 0x0c, 1 << (7 + dev_ind),
+ (dev->enabled ? 0 : 1) << (7 + dev_ind));
+ if (dev->enabled)
+ sr5650_gpp_sb_init(nb_dev, dev, dev_ind);
+ /* Dont call disable_pcie_bar3(nb_dev) here, otherwise the screen will crash. */
+ break;
+ case 11:
+ case 12: /* bus 0, dev 11,12, GPP2 */
+ printk(BIOS_INFO, "Bus-0, Dev-11,12, Fun-0. enable=%d\n", dev->enabled);
+ set_nbmisc_enable_bits(nb_dev, 0x0c, 1 << (7 + dev_ind),
+ (dev->enabled ? 0 : 1) << (7 + dev_ind));
+ if (dev->enabled)
+ sr5650_gpp_sb_init(nb_dev, dev, dev_ind);
+ break;
+ case 13: /* bus 0, dev 12, GPP3b */
+ set_nbmisc_enable_bits(nb_dev, 0x0c, 1 << (7 + dev_ind),
+ (dev->enabled ? 0 : 1) << (7 + dev_ind));
+ if (dev->enabled)
+ sr5650_gpp_sb_init(nb_dev, dev, dev_ind);
+ break;
+ default:
+ printk(BIOS_DEBUG, "unknown dev: %s\n", dev_path(dev));
+ }
+}
+
+struct chip_operations southbridge_amd_sr5650_ops = {
+ CHIP_NAME("ATI SR5650")
+ .enable_dev = sr5650_enable,
+};
--- /dev/null
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef __SR5650_H__
+#define __SR5650_H__
+
+#include <stdint.h>
+#include <device/pci_ids.h>
+#include "chip.h"
+#include "rev.h"
+
+typedef struct __PCIE_CFG__ {
+ u16 Config;
+ u8 ResetReleaseDelay;
+ u8 Gfx0Width;
+ u8 Gfx1Width;
+ u8 GfxPayload;
+ u8 GppPayload;
+ u16 PortDetect;
+ u8 PortHp; /* hot plug */
+ u16 DbgConfig;
+ u32 DbgConfig2;
+ u8 GfxLx;
+ u8 GppLx;
+ u8 NBSBLx;
+ u8 PortSlotInit;
+ u8 Gfx0Pwr;
+ u8 Gfx1Pwr;
+ u8 GppPwr;
+} PCIE_CFG;
+
+/* PCIE config flags */
+#define PCIE_DUALSLOT_CONFIG (1 << 0)
+#define PCIE_OVERCLOCK_ENABLE (1 << 1)
+#define PCIE_GPP_CLK_GATING (1 << 2)
+#define PCIE_ENABLE_STATIC_DEV_REMAP (1 << 3)
+#define PCIE_OFF_UNUSED_GFX_LANES (1 << 4)
+#define PCIE_OFF_UNUSED_GPP_LANES (1 << 5)
+#define PCIE_DISABLE_HIDE_UNUSED_PORTS (1 << 7)
+#define PCIE_GFX_CLK_GATING (1 << 11)
+#define PCIE_GFX_COMPLIANCE (1 << 14)
+#define PCIE_GPP_COMPLIANCE (1 << 15)
+
+/* -------------------- ----------------------
+* NBMISCIND
+ ------------------- -----------------------*/
+#define PCIE_LINK_CFG 0x8
+#define PCIE_NBCFG_REG7 0x37
+#define STRAPS_OUTPUT_MUX_7 0x67
+#define STRAPS_OUTPUT_MUX_A 0x6a
+
+/* -------------------- ----------------------
+* PCIEIND
+ ------------------- -----------------------*/
+#define PCIE_CI_CNTL 0x20
+#define PCIE_LC_LINK_WIDTH 0xa2
+#define PCIE_LC_STATE0 0xa5
+#define PCIE_VC0_RESOURCE_STATUS 0x12a /* 16bit read only */
+
+#define PCIE_CORE_INDEX_SB (0x05 << 16) /* see rpr 4.3.2.2, bdg 2.1 */
+#define PCIE_CORE_INDEX_GPP1 (0x04 << 16)
+#define PCIE_CORE_INDEX_GPP2 (0x06 << 16)
+#define PCIE_CORE_INDEX_GPP1_GPP2 (0x00 << 16)
+#define PCIE_CORE_INDEX_GPP3a (0x07 << 16)
+#define PCIE_CORE_INDEX_GPP3b (0x03 << 16)
+
+/* contents of PCIE_VC0_RESOURCE_STATUS */
+#define VC_NEGOTIATION_PENDING (1 << 1)
+
+#define LC_STATE_RECONFIG_GPPSB 0x10
+
+/* ------------------------------------------------
+* Global variable
+* ------------------------------------------------- */
+extern PCIE_CFG AtiPcieCfg;
+
+/* ----------------- export funtions ----------------- */
+u32 nbpcie_p_read_index(device_t dev, u32 index);
+void nbpcie_p_write_index(device_t dev, u32 index, u32 data);
+u32 nbpcie_ind_read_index(device_t nb_dev, u32 index);
+void nbpcie_ind_write_index(device_t nb_dev, u32 index, u32 data);
+u32 pci_ext_read_config32(device_t nb_dev, device_t dev, u32 reg);
+void pci_ext_write_config32(device_t nb_dev, device_t dev, u32 reg, u32 mask, u32 val);
+void sr5650_set_tom(device_t nb_dev);
+
+void ProgK8TempMmioBase(u8 in_out, u32 pcie_base_add, u32 mmio_base_add);
+void enable_pcie_bar3(device_t nb_dev);
+void disable_pcie_bar3(device_t nb_dev);
+
+void sr5650_enable(device_t dev);
+void sr5650_gpp_sb_init(device_t nb_dev, device_t dev, u32 port);
+void sr5650_gfx_init(device_t nb_dev, device_t dev, u32 port);
+void avoid_lpc_dma_deadlock(device_t nb_dev, device_t sb_dev);
+void config_gpp_core(device_t nb_dev, device_t sb_dev);
+void PcieReleasePortTraining(device_t nb_dev, device_t dev, u32 port);
+u8 PcieTrainPort(device_t nb_dev, device_t dev, u32 port);
+void pcie_config_misc_clk(device_t nb_dev);
+void fam10_optimization(void);
+void disable_pcie_bridge(void);
+u32 get_vid_did(device_t dev);
+void sr5650_nb_pci_table(device_t nb_dev);
+void init_gen2(device_t nb_dev, device_t dev, u8 port);
+#endif /* SR5650_H */
projects / coreboot.git / commitdiff