--- /dev/null
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include <delay.h>
+#include "sr5650.h"
+#include "cmn.h"
+
+/*------------------------------------------------
+* Global variable
+------------------------------------------------*/
+PCIE_CFG AtiPcieCfg = {
+ PCIE_ENABLE_STATIC_DEV_REMAP, /* Config */
+ 0, /* ResetReleaseDelay */
+ 0, /* Gfx0Width */
+ 0, /* Gfx1Width */
+ 0, /* GfxPayload */
+ 0, /* GppPayload */
+ 0, /* PortDetect, filled by GppSbInit */
+ 0, /* PortHp */
+ 0, /* DbgConfig */
+ 0, /* DbgConfig2 */
+ 0, /* GfxLx */
+ 0, /* GppLx */
+ 0, /* NBSBLx */
+ 0, /* PortSlotInit */
+ 0, /* Gfx0Pwr */
+ 0, /* Gfx1Pwr */
+ 0 /* GppPwr */
+};
+
+static void ValidatePortEn(device_t nb_dev);
+
+static void ValidatePortEn(device_t nb_dev)
+{
+}
+
+/*****************************************************************
+* Compliant with CIM_33's PCIEPowerOffGppPorts
+* Power off unused GPP lines
+*****************************************************************/
+static void PciePowerOffGppPorts(device_t nb_dev, device_t dev, u32 port)
+{
+ u32 reg;
+ u16 state_save;
+ struct southbridge_amd_sr5650_config *cfg =
+ (struct southbridge_amd_sr5650_config *)nb_dev->chip_info;
+ u16 state = cfg->port_enable;
+
+ if (!(AtiPcieCfg.Config & PCIE_DISABLE_HIDE_UNUSED_PORTS))
+ state &= AtiPcieCfg.PortDetect;
+ state = ~state;
+ state &= (1 << 4) + (1 << 5) + (1 << 6) + (1 << 7);
+ state_save = state << 17;
+ state &= !(AtiPcieCfg.PortHp);
+ reg = nbmisc_read_index(nb_dev, 0x0c);
+ reg |= state;
+ nbmisc_write_index(nb_dev, 0x0c, reg);
+
+ reg = nbmisc_read_index(nb_dev, 0x08);
+ reg |= state_save;
+ nbmisc_write_index(nb_dev, 0x08, reg);
+
+ if ((AtiPcieCfg.Config & PCIE_OFF_UNUSED_GPP_LANES)
+ && !(AtiPcieCfg.
+ Config & (PCIE_DISABLE_HIDE_UNUSED_PORTS +
+ PCIE_GFX_COMPLIANCE))) {
+ }
+ /* step 3 Power Down Control for Southbridge */
+ reg = nbpcie_p_read_index(dev, 0xa2);
+
+ switch ((reg >> 4) & 0x7) { /* get bit 4-6, LC_LINK_WIDTH_RD */
+ case 1:
+ nbpcie_ind_write_index(nb_dev, 0x65, 0x0e0e);
+ break;
+ case 2:
+ nbpcie_ind_write_index(nb_dev, 0x65, 0x0c0c);
+ break;
+ default:
+ break;
+ }
+}
+
+/**********************************************************************
+**********************************************************************/
+static void switching_gpp1_configurations(device_t nb_dev, device_t sb_dev)
+{
+ u32 reg;
+ struct southbridge_amd_sr5650_config *cfg =
+ (struct southbridge_amd_sr5650_config *)nb_dev->chip_info;
+
+ /* 4.3.3.1.1.1.step1. Asserts PCIE-GPP1 global reset */
+ reg = nbmisc_read_index(nb_dev, 0x8);
+ reg |= 1 << 15;
+ nbmisc_write_index(nb_dev, 0x8, reg);
+
+ /* 4.3.3.1.1.1.step2. De-asserts STRAP_BIF_all_valid for PCIE-GPP1 core */
+ reg = nbmisc_read_index(nb_dev, 0x26);
+ reg |= 1 << 28;
+ nbmisc_write_index(nb_dev, 0x26, reg);
+
+ /* 4.3.3.1.1.1.step3. Programs PCIE-GPP1 to be desired port configuration 8:8 or 16:0. */
+ reg = nbmisc_read_index(nb_dev, 0x8);
+ reg &= ~(1 << 8); /* clean */
+ reg |= cfg->gpp1_configuration << 8;
+ nbmisc_write_index(nb_dev, 0x8, reg);
+
+ /* 4.3.3.1.1.1.step4. Wait for 2ms */
+ mdelay(1);
+
+ /* 4.3.3.1.1.1.step5. Asserts STRAP_BIF_all_valid for PCIE-GPP1 core */
+ reg = nbmisc_read_index(nb_dev, 0x26);
+ reg &= ~(1 << 28);
+ nbmisc_write_index(nb_dev, 0x26, reg);
+
+ /* 4.3.3.1.1.1.step6. De-asserts PCIE-GPP1 global reset */
+ reg = nbmisc_read_index(nb_dev, 0x8);
+ reg &= ~(1 << 15);
+ nbmisc_write_index(nb_dev, 0x8, reg);
+
+ /* Follow the procedure for PCIE-GPP1 common initialization and
+ * link training sequence. */
+}
+
+/**********************************************************************
+**********************************************************************/
+static void switching_gpp2_configurations(device_t nb_dev, device_t sb_dev)
+{
+ u32 reg;
+ struct southbridge_amd_sr5650_config *cfg =
+ (struct southbridge_amd_sr5650_config *)nb_dev->chip_info;
+
+ /* 4.3.3.1.1.2.step1. Asserts PCIE-GPP2 global reset */
+ reg = nbmisc_read_index(nb_dev, 0x8);
+ reg |= 1 << 13;
+ nbmisc_write_index(nb_dev, 0x8, reg);
+
+ /* 4.3.3.1.1.2.step2. De-asserts STRAP_BIF_all_valid for PCIE-GPP2 core */
+ reg = nbmisc_read_index(nb_dev, 0x26);
+ reg |= 1 << 29;
+ nbmisc_write_index(nb_dev, 0x26, reg);
+
+ /* 4.3.3.1.1.2.step3. Programs PCIE-GPP2 to be desired port configuration 8:8 or 16:0. */
+ reg = nbmisc_read_index(nb_dev, 0x8);
+ reg &= ~(1 << 9); /* clean */
+ reg |= (cfg->gpp2_configuration & 1) << 9;
+ nbmisc_write_index(nb_dev, 0x8, reg);
+
+ /* 4.3.3.1.1.2.step4. Wait for 2ms */
+ mdelay(2);
+
+ /* 4.3.3.1.1.2.step5. Asserts STRAP_BIF_all_valid for PCIE-GPP2 core */
+ reg = nbmisc_read_index(nb_dev, 0x26);
+ reg &= ~(1 << 29);
+ nbmisc_write_index(nb_dev, 0x26, reg);
+
+ /* 4.3.3.1.1.2.step6. De-asserts PCIE-GPP2 global reset */
+ reg = nbmisc_read_index(nb_dev, 0x8);
+ reg &= ~(1 << 13);
+ nbmisc_write_index(nb_dev, 0x8, reg);
+
+ /* Follow the procedure for PCIE-GPP2 common initialization and
+ * link training sequence. */
+}
+static void switching_gpp3a_configurations(device_t nb_dev, device_t sb_dev)
+{
+ u32 reg;
+ struct southbridge_amd_sr5650_config *cfg =
+ (struct southbridge_amd_sr5650_config *)nb_dev->chip_info;
+
+ /* 4.3.3.2.3.2.step1. Asserts PCIE-GPP3a global reset. */
+ reg = nbmisc_read_index(nb_dev, 0x8);
+ reg |= 1 << 31;
+ nbmisc_write_index(nb_dev, 0x8, reg);
+ /* 4.3.3.2.3.2.step2. De-asserts STRAP_BIF_all_valid for PCIE-GPP3a core */
+ reg = nbmisc_read_index(nb_dev, 0x26);
+ reg |= 1 << 30;
+ nbmisc_write_index(nb_dev, 0x26, reg);
+ /* 4.3.3.2.3.2.step3. Programs the desired PCIE-GPP3a configuration. */
+ reg = nbmisc_read_index(nb_dev, 0x67);
+ reg &= ~0x1F; /* clean */
+ reg |= cfg->gpp3a_configuration;
+ nbmisc_write_index(nb_dev, 0x67, reg);
+ /* 4.3.3.2.3.2.step4. Programs PCIE-GPP3a Line Director. */
+ reg = nbmisc_read_index(nb_dev, 0x26);
+ reg &= 0xF0000000; /* TODO:Lane reversed. */
+ switch (cfg->gpp3a_configuration) {
+ case 0xB: /* 1:1:1:1:1:1 */
+ reg |= 0x2AA3554;
+ break;
+ case 0x1: /* 4:2:0:0:0:0 */
+ reg |= 0x055B000;
+ break;
+ case 0x2: /* 4:1:1:0:0:0 */
+ reg |= 0x215B400;
+ break;
+ case 0xC: /* 2:2:2:0:0:0 */
+ reg |= 0xFF0BAA0;
+ break;
+ case 0xA: /* 2:2:1:1:0:0 */
+ reg |= 0x215B400;
+ break;
+ case 0x4: /* 2:1:1:1:1:0 */
+ reg |= 0xFF0BAA0;
+ break;
+ default: /* shouldn't be here. */
+ printk(BIOS_DEBUG, "Warning:gpp3a_configuration is not correct. Check you devicetree.cb\n");
+ break;
+ }
+ nbmisc_write_index(nb_dev, 0x26, reg);
+ /* 4.3.3.2.3.2.step5. De-asserts STRAP_BIF_all_valid for PCIE-GPP3a core */
+ reg = nbmisc_read_index(nb_dev, 0x26);
+ reg &= ~(1 << 30);
+ nbmisc_write_index(nb_dev, 0x26, reg);
+ /* 4.3.3.2.3.2.step6. De-asserts PCIE-GPP3a global reset. */
+ reg = nbmisc_read_index(nb_dev, 0x8);
+ reg &= ~(1 << 31);
+ nbmisc_write_index(nb_dev, 0x8, reg);
+}
+
+/*****************************************************************
+* The sr5650 uses NBCONFIG:0x1c (BAR3) to map the PCIE Extended Configuration
+* Space to a 256MB range within the first 4GB of addressable memory.
+*****************************************************************/
+void enable_pcie_bar3(device_t nb_dev)
+{
+ printk(BIOS_DEBUG, "enable_pcie_bar3()\n");
+ set_nbcfg_enable_bits(nb_dev, 0x7C, 1 << 30, 1 << 30); /* Enables writes to the BAR3 register. */
+ set_nbcfg_enable_bits(nb_dev, 0x84, 7 << 16, 0 << 16);
+
+ pci_write_config32(nb_dev, 0x1C, EXT_CONF_BASE_ADDRESS); /* PCIEMiscInit */
+ pci_write_config32(nb_dev, 0x20, 0x00000000);
+ set_htiu_enable_bits(nb_dev, 0x32, 1 << 28, 1 << 28); /* PCIEMiscInit */
+ ProgK8TempMmioBase(1, EXT_CONF_BASE_ADDRESS, TEMP_MMIO_BASE_ADDRESS);
+}
+
+/*****************************************************************
+* We should disable bar3 when we want to exit sr5650_enable, because bar3 will be
+* remapped in set_resource later.
+*****************************************************************/
+void disable_pcie_bar3(device_t nb_dev)
+{
+ printk(BIOS_DEBUG, "disable_pcie_bar3()\n");
+ pci_write_config32(nb_dev, 0x1C, 0); /* clear BAR3 address */
+ set_nbcfg_enable_bits(nb_dev, 0x7C, 1 << 30, 0 << 30); /* Disable writes to the BAR3. */
+ ProgK8TempMmioBase(0, EXT_CONF_BASE_ADDRESS, TEMP_MMIO_BASE_ADDRESS);
+}
+
+/*
+*/
+void init_gen2(device_t nb_dev, device_t dev, u8 port)
+{
+ u32 reg, val;
+ /* for A11 (0x89 == 0) */
+ reg = 0x34;
+ if (port <= 3){
+ val = 1<<5;
+ }else{
+ val = 1<<31;
+ if (port >= 9 )
+ reg = 0x39;
+ }
+
+ /* todo: check for rev > a11
+ switch (port) {
+ case 2;
+ reg = 0x34;
+ val = 1<<5;
+ break;
+ case 3:
+ reg = 0x22;
+ val = 1<<6;
+ break;
+ case 4:
+ reg = 0x34;
+ val = 1<<31;
+ break;
+ case 5:
+ case 6:
+ reg = 0x39;
+ val = 1<<31;
+ break;
+ case 7..9:
+ reg = 0x37;
+ val = 1<<port;
+ break;
+ case 10:
+ reg = 0x22;
+ val = 1<<5;
+ break;
+ default:
+ reg = 0;
+ break;
+ }
+ */
+ set_pcie_enable_bits(dev, 0xA4, 0x1, 0x1);
+ pci_ext_write_config32(nb_dev, dev, 0x88, 0xF0, 1<<2); /* LINK_CRTL2*/
+ set_nbmisc_enable_bits(nb_dev, reg, val, val);
+}
+
+
+/* Alternative to default CPL buffer count */
+const u8 pGpp420000[] = {0x38, 0x1C};
+const u8 pGpp411000[] = {0x38, 0x0E, 0x0E};
+const u8 pGpp222000[] = {0x1C, 0x1C, 0x1C};
+const u8 pGpp221100[] = {0x1C, 0x1C, 0x0E, 0x0E};
+const u8 pGpp211110[] = {0x1C, 0x0E, 0x0E, 0x0E, 0, 0x0E, 0x0E};
+const u8 pGpp111111[] = {0x0E, 0x0E, 0x0E, 0x0E, 0, 0x0E, 0x0E};
+
+/*
+ * Enabling Dynamic Slave CPL Buffer Allocation Feature for PCIE-GPP3a Ports
+ * PcieLibCplBufferAllocation
+ */
+static void gpp3a_cpl_buf_alloc(device_t nb_dev, device_t dev)
+{
+ u8 dev_index;
+ u8 *slave_cpl;
+ u8 value;
+ struct southbridge_amd_sr5650_config *cfg =
+ (struct southbridge_amd_sr5650_config *)nb_dev->chip_info;
+
+ dev_index = dev->path.pci.devfn >> 3;
+ if (dev_index < 4 || dev_index > 0xa) {
+ return;
+ }
+
+ switch (cfg->gpp3a_configuration) {
+ case 0x1: /* 4:2:0:0:0:0 */
+ slave_cpl = (u8 *)&pGpp420000;
+ break;
+ case 0x2: /* 4:1:1:0:0:0 */
+ slave_cpl = (u8 *)&pGpp411000;
+ break;
+ case 0xC: /* 2:2:2:0:0:0 */
+ slave_cpl = (u8 *)&pGpp222000;
+ break;
+ case 0xA: /* 2:2:1:1:0:0 */
+ slave_cpl = (u8 *)&pGpp221100;
+ break;
+ case 0x4: /* 2:1:1:1:1:0 */
+ slave_cpl = (u8 *)&pGpp211110;
+ break;
+ case 0xB: /* 1:1:1:1:1:1 */
+ slave_cpl = (u8 *)&pGpp111111;
+ break;
+ default: /* shouldn't be here. */
+ printk(BIOS_DEBUG, "buggy gpp3a_configuration\n");
+ break;
+ }
+
+ value = slave_cpl[dev_index - 4];
+ if (value != 0) {
+ set_pcie_enable_bits(dev, 0x10, 0x3f << 8, value << 8);
+ set_pcie_enable_bits(dev, 0x20, 1 << 11, 1 << 11);
+ }
+}
+
+/*
+ * Enabling Dynamic Slave CPL Buffer Allocation Feature for PCIE-GPP1/PCIE-GPP2 Ports
+ * PcieLibCplBufferAllocation
+ */
+static void gpp12_cpl_buf_alloc(device_t nb_dev, device_t dev)
+{
+ u8 gpp_cfg;
+ u8 value;
+ u8 dev_index;
+
+ dev_index = dev->path.pci.devfn >> 3;
+ struct southbridge_amd_sr5650_config *cfg =
+ (struct southbridge_amd_sr5650_config *)nb_dev->chip_info;
+
+ if (dev_index < 4) {
+ gpp_cfg = cfg->gpp1_configuration;
+ } else if (dev_index > 0xa) {
+ gpp_cfg = cfg->gpp2_configuration;
+ } else {
+ return;
+ }
+
+ if (gpp_cfg == 0) {
+ /* Configuration 16:0, leave the default value */
+ } else if (gpp_cfg == 1) {
+ /* Configuration 8:8 */
+ value = 0x60;
+ set_pcie_enable_bits(dev, 0x10, 0x3f << 8, value << 8);
+ set_pcie_enable_bits(dev, 0x20, 1 << 11, 1 << 11);
+ } else {
+ printk(BIOS_DEBUG, "buggy gpp configuration\n");
+ }
+}
+
+#if 0 /* BTS report error without this function. But some board
+ * fail to boot. Leave it here for future debug. */
+
+/*
+ * Enable LCLK clock gating
+ */
+static void EnableLclkGating(device_t dev)
+{
+ u8 port;
+ u32 reg = 0;
+ u32 mask = 0;
+ u32 value = 0;
+ device_t nb_dev = dev_find_slot(0, 0);
+ device_t clk_f1= dev_find_slot(0, 1);
+
+ port = dev->path.pci.devfn >> 3;
+ switch (port) {
+ //PCIE_CORE_INDEX_GPP1
+ case 2:
+ case 3:
+ reg = 0x94;
+ mask = 1 << 16;
+ break;
+
+ //PCIE_CORE_INDEX_GPP2
+ case 11:
+ case 12:
+ reg = 0xE8;
+ value = 1 << 28;
+ break;
+
+ //PCIE_CORE_INDEX_GPP3a
+ case 4 ... 7:
+ case 9:
+ case 10:
+ reg = 0xE8;
+ value = 1 << 31;
+ break;
+
+ //PCIE_CORE_INDEX_GPP3b;
+ case 13:
+ reg = 0xE8;
+ value = 1 << 25;
+ break;
+
+ //PCIE_CORE_INDEX_SB;
+ case 8:
+ reg = 0x94;
+ mask = 1 << 24;
+ break;
+ default:
+ break;
+ }
+ /* enable access func1 */
+ set_nbcfg_enable_bits(nb_dev, 0x4C, 1 << 0, 1 << 0);
+ set_nbcfg_enable_bits(clk_f1, reg, mask, value);
+}
+#endif
+
+/*****************************************
+* Compliant with CIM_33's PCIEGPPInit
+* nb_dev:
+* root bridge struct
+* dev:
+* p2p bridge struct
+* port:
+* p2p bridge number, 4-10
+*****************************************/
+void sr5650_gpp_sb_init(device_t nb_dev, device_t dev, u32 port)
+{
+ u32 gpp_sb_sel = 0;
+ struct southbridge_amd_sr5650_config *cfg =
+ (struct southbridge_amd_sr5650_config *)nb_dev->chip_info;
+
+ printk(BIOS_DEBUG, "gpp_sb_init nb_dev=0x%p, dev=0x%p, port=0x%x\n", nb_dev, dev, port);
+ switch (port) {
+ case 2:
+ case 3:
+ gpp_sb_sel = PCIE_CORE_INDEX_GPP1;
+ break;
+ case 4 ... 7:
+ case 9:
+ case 10:
+ gpp_sb_sel = PCIE_CORE_INDEX_GPP3a;
+ break;
+ case 8:
+ gpp_sb_sel = PCIE_CORE_INDEX_SB;
+ break;
+ case 11:
+ case 12:
+ gpp_sb_sel = PCIE_CORE_INDEX_GPP2;
+ break;
+ case 13:
+ gpp_sb_sel = PCIE_CORE_INDEX_GPP3b;
+ break;
+ }
+
+ /* Init common Core registers */
+ set_pcie_enable_bits(dev, 0xB1, 1 << 28 | 1 << 23 | 1 << 20 | 1 << 19,
+ 1 << 28 | 1 << 23 | 1 << 20 | 1 << 19);
+ if (gpp_sb_sel == PCIE_CORE_INDEX_GPP3a) {
+ set_pcie_enable_bits(dev, 0xB1, 1 << 22, 1 << 22);
+ /* 4.3.3.2.3 Step 10: Dynamic Slave CPL Buffer Allocation */
+ gpp3a_cpl_buf_alloc(nb_dev, dev);
+ }
+ if (gpp_sb_sel == PCIE_CORE_INDEX_GPP1 || gpp_sb_sel == PCIE_CORE_INDEX_GPP2) {
+ gpp12_cpl_buf_alloc(nb_dev, dev);
+ }
+ set_pcie_enable_bits(dev, 0xA1, (1 << 26) | (1 << 24) | (1 << 11), 1 << 11);
+ set_pcie_enable_bits(dev, 0xA0, 0x0000FFF0, 0x6830);
+ // PCIE should not ignore malformed packet error or ATS request
+ set_pcie_enable_bits(dev, 0x70, 1 << 12, 0);
+ //Step 14.1: Advertising Hot Plug Capabilities
+ set_pcie_enable_bits(dev, 0x10, 1 << 4, 1 << 4); //Enable power fault
+
+ set_pcie_enable_bits(nb_dev, 0xC1 | gpp_sb_sel, 1 << 0, 1 << 0);
+
+ /* init GPP core */
+ /* 4.4.2.step13.1. Sets RCB completion timeout to be 200ms */
+ pci_ext_write_config32(nb_dev, dev, 0x80, 0xF << 0, 0x6 << 0);
+ /* 4.4.2.step13.2. RCB completion timeout on link down to shorten enumeration time. */
+ set_pcie_enable_bits(dev, 0x70, 1 << 19, 1 << 19);
+ /* 4.4.2.step13.3. Enable slave ordering rules */
+ set_pcie_enable_bits(nb_dev, 0x20 | gpp_sb_sel, 1 << 8, 0 << 8);
+ /* 4.4.2.step13.4. Sets DMA payload size to 64 bytes. */
+ set_pcie_enable_bits(nb_dev, 0x10 | gpp_sb_sel, 7 << 10, 4 << 10);
+ /* 4.4.2.step13.5. Set REGS_DLP_IGNORE_IN_L1_EN to ignore DLLPs
+ during L1 so that Tx Clk can be turned off. */
+ set_pcie_enable_bits(nb_dev, 0x02 | gpp_sb_sel, 1 << 0 | 1 << 8, 1 << 0 | 1 << 8); // add bit 8 from CIMx
+ /* 4.4.2.step13.6. Set REGS_LC_ALLOW_TX_L1_CONTROL to allow TX to
+ prevent LC from going to L1 when there are outstanding completions.*/
+ set_pcie_enable_bits(dev, 0x02, 1 << 15, 1 << 15);
+ /* 4.4.2.step13.7. Set REGS_LC_DONT_GO_TO_L0S_IF_L1_ARMED to prevent
+ lc to go to from L0 to Rcv_L0s if L1 is armed. */
+ set_pcie_enable_bits(dev, 0xA1, 1 << 11, 1 << 11);
+ /* 4.4.2.step13.8. CMGOOD_OVERRIDE for all five PCIe cores. */
+ set_nbmisc_enable_bits(nb_dev, 0x22, 1 << 27, 1 << 27);
+ /* 4.4.2.step13.9. Prevents Electrical Idle from causing a
+ transition from Rcv_L0 to Rcv_L0s. */
+ set_pcie_enable_bits(dev, 0xB1, 1 << 20, 1 << 20);
+ /* 4.4.2.step13.10. Prevents the LTSSM from going to Rcv_L0s if
+ it has already acknowledged a request to go
+ to L1 but it has not transitioned there yet. */
+ /* seems the same as step13.7 */
+ set_pcie_enable_bits(dev, 0xA1, 1 << 11, 1 << 11);
+ /* 4.4.2.step13.11. Transmits FTS before Recovery. */
+ set_pcie_enable_bits(dev, 0xA3, 1 << 9, 1 << 9);
+ /* 4.4.2.step13.12. Sets TX arbitration algorithm to round robin
+ for PCIE-GPP1, PCIE-GPP2, PCIE-GPP3a and PCIE-GPP3b cores only. */
+ //if (gpp_sb_sel != PCIE_CORE_INDEX_SB) /* RPR NOT set SB_CORE, BTS set SB_CORE, we comply with BTS */
+ set_pcie_enable_bits(nb_dev, 0x1C | gpp_sb_sel, 0x7FF, 0x109);
+ /* 4.4.2.step13.13. Sets number of TX Clocks to drain TX Pipe to 0x3.*/
+ set_pcie_enable_bits(dev, 0xA0, 0xF << 4, 0x3 << 4);
+ /* 4.4.2.step13.14. Lets PI use Electrical Idle from PHY when
+ turning off PLL in L1 at Gen 2 speed instead of Inferred Electrical
+ Idle.
+ NOTE: LC still uses Inferred Electrical Idle. */
+ set_pcie_enable_bits(nb_dev, 0x40 | gpp_sb_sel, 3 << 14, 2 << 14);
+ /* 4.4.2.step13.15. Turn on rx_fronten_en for all active lanes upon
+ exit from Electrical Idle, rather than being tied to PLL_PDNB. */
+ set_pcie_enable_bits(nb_dev, 0xC2 | gpp_sb_sel, 1 << 25, 1 << 25);
+
+ /* 4.4.2.step13.16. Advertises TX L0s and L1 exit latency.
+ TX L0s exit latency to be 100b: 512ns to less than 1us;
+ L1 exit latency to be 011b: 4us to less than 8us.
+ For Hot-Plug Slots: Advertise TX L0s and L1 exit latency.
+ TX L0s exit latency to be 110b: 2us to 4us.
+ L1 exit latency to be 111b: more than 64us.*/
+ //set_pcie_enable_bits(dev, 0xC1, 0xF << 0, 0xC << 0); /* 0xF for htplg. */
+ set_pcie_enable_bits(dev, 0xC1, 0xF << 0, 0xF << 0); /* 0xF for htplg. */
+ /* 4.4.2.step13.17. Always ACK an ASPM L1 entry DLLP to
+ workaround credit control issue on PM_NAK
+ message of SB700 and SB800. */
+ /* 4.4.4.step13.18. To allow advertising Gen 2 capabilities to Southbridge. */
+ if (port == 8) {
+ set_pcie_enable_bits(dev, 0xA0, 1 << 23, 1 << 23);
+ set_pcie_enable_bits(nb_dev, 0xC1 | gpp_sb_sel, 1 << 1, 1 << 1);
+ }
+ /* 4.4.2.step13.19. CMOS Option (Gen 2 AUTO-Part 1 - Enabled by Default) */
+ /* 4.4.2.step13.20. CMOS Option (RC Advertised Gen 2-Part1 - Disabled by Default)*/
+ set_nbcfg_enable_bits(dev, 0x88, 0xF << 0, 0x2 << 0);
+ /* Disables GEN2 capability of the device.
+ * RPR typo- it says enable but the bit setting says disable.
+ * Disable it here and we enable it later. */
+ set_pcie_enable_bits(dev, 0xA4, 1 << 0, 1 << 0);
+ /* 4.4.2.step13.21. */
+ /* 4.4.2.step13.22 */
+ /* Enable native PME. */
+ set_pcie_enable_bits(dev, 0x10, 1 << 3, 1 < 3);
+ /* This bit when set indicates that the PCIe Link associated with this port
+ is connected to a slot. */
+ pci_ext_write_config32(nb_dev, dev, 0x5a, 1 << 8, 1 << 8);
+ /* This bit when set indicates that this slot is capable of supporting
+ Hot-Plug operations. */
+ set_nbcfg_enable_bits(dev, 0x6C, 1 << 6, 1 << 6);
+ /* Enables flushing of TLPs when Data Link is down. */
+ set_pcie_enable_bits(dev, 0x20, 1 << 19, 0 << 19);
+
+ /* 4.4.2.step14. Server Class Hot Plug Feature */
+ /* 4.4.2 step14.1: Advertising Hot Plug Capabilities */
+ /* 4.4.2.step14.2: Firmware Upload */
+ /* 4.4.2.Step14.3: SBIOS Acknowledgment to Firmware of Successful Firmware Upload */
+ /* step14.4 */
+ /* step14.5 */
+ /* skip */
+
+ /* CIMx LPC Deadlock workaround - Enable Memory Write Map*/
+ if (gpp_sb_sel == PCIE_CORE_INDEX_SB) {
+ set_pcie_enable_bits(nb_dev, 0x10 | gpp_sb_sel, 1 << 9, 1 << 9);
+ set_htiu_enable_bits(nb_dev, 0x06, 1 << 26, 1 << 26);
+ }
+
+ /* This CPL setup requires more than this one register and should be done in gpp_core.
+ * The additional setup is for the different revisions. */
+
+ /* CIMx CommonPortInit settings that are not set above. */
+ pci_ext_write_config32(nb_dev, dev, 0x88, 0xF0, 1 << 0); /* LINK_CRTL2 */
+
+ if ( port == 8 )
+ set_pcie_enable_bits(dev, 0xA0, 0, 1 << 23);
+
+ /* set automatic Gen2 support, needs mainboard config option as Gen2 can cause issues on some platforms. */
+ init_gen2(nb_dev, dev, port);
+ set_pcie_enable_bits(dev, 0xA4, 1 << 29, 1 << 29);
+ set_pcie_enable_bits(dev, 0xC0, 1 << 15, 0);
+ set_pcie_enable_bits(dev, 0xA2, 1 << 13, 0);
+
+ /* Hotplug Support - bit5 + bit6 capable and surprise */
+ pci_ext_write_config32(nb_dev, dev, 0x6c, 0x60, 0x60);
+
+ /* Set interrupt pin info 0x3d */
+ pci_ext_write_config32(nb_dev, dev, 0x3c, 1 << 8, 1 << 8);
+
+ /* 5.12.9.3 Hotplug step 1 - NB_PCIE_ROOT_CTRL - enable pm irq
+ The RPR is wrong - this is not a PCIEND_P register */
+ pci_ext_write_config32(nb_dev, dev, 0x74, 1 << 3, 1 << 3);
+
+ /* 5.12.9.3 step 2 - PCIEP_PORT_CNTL - enable hotplug messages */
+ if ( port != 8)
+ set_pcie_enable_bits(dev, 0x10, 1 << 2, 1 << 2);
+
+ /* Not sure about this PME setup */
+ /* Native PME */
+ set_pcie_enable_bits(dev, 0x10, 1 << 3, 1 << 3); /* Not set in CIMx */
+
+ /* PME Enable */
+ pci_ext_write_config32(nb_dev, dev, 0x54, 1 << 8, 1 << 8); /* Not in CIMx */
+
+ /* 4.4.3 Training for GPP devices */
+ /* init GPP */
+ switch (port) {
+ case 2:
+ case 3:
+ case 4: /* GPP_SB */
+ case 5:
+ case 6:
+ case 7:
+ case 9: /*GPP*/
+ case 10:
+ case 11:
+ case 12:
+ case 13:
+ /* 4.4.2.step13.5. Blocks DMA traffic during C3 state */
+ set_pcie_enable_bits(dev, 0x10, 1 << 0, 0 << 0);
+ /* Enabels TLP flushing */
+ set_pcie_enable_bits(dev, 0x20, 1 << 19, 0 << 19);
+
+ /* check port enable */
+ if (cfg->port_enable & (1 << port)) {
+ PcieReleasePortTraining(nb_dev, dev, port);
+ if (!(AtiPcieCfg.Config & PCIE_GPP_COMPLIANCE)) {
+ u8 res = PcieTrainPort(nb_dev, dev, port);
+ printk(BIOS_DEBUG, "PcieTrainPort port=0x%x result=%d\n", port, res);
+ if (res) {
+ AtiPcieCfg.PortDetect |= 1 << port;
+ }
+ }
+ }
+ break;
+ case 8: /* SB */
+ break;
+ default:
+ break;
+ }
+
+ /* Re-enable RC ordering logic after training (from CIMx)*/
+ set_pcie_enable_bits(nb_dev, 0x20 | gpp_sb_sel, 1 << 9, 0);
+
+ /* Advertising Hot Plug Capabilities */
+ pci_ext_write_config32(nb_dev, dev, 0x6c, 0x04001B, 0x00001B);
+
+ /* PCIE Late Init (CIMx late init - Maybe move somewhere else? Later in the coreboot PCI device enum?) */
+ /* Set Slot Number */
+ pci_ext_write_config32(nb_dev, dev, 0x6c, 0x1FFF << 19, port << 19);
+
+ /* Set Slot present 0x5A*/
+ pci_ext_write_config32(nb_dev, dev, 0x58, 1 << 24, 1 << 24);
+
+ //PCIE-GPP1 TXCLK Clock Gating In L1 Late Core sttting - Maybe move somewhere else? */
+ set_pcie_enable_bits(nb_dev, 0x11 | gpp_sb_sel, 0xF << 0, 0x0C << 0);
+ /* Enable powering down PLLs in L1 or L23 Ready states.
+ * Turns off PHY`s RX FRONTEND during L1 when PLL power down is enabled */
+ set_pcie_enable_bits(nb_dev, 0x40 | gpp_sb_sel, 0x1219, 0x1009);
+ /* 4.4..7.1 TXCLK Gating in L1, Enables powering down TXCLK clock pads on the receive side. */
+ set_pcie_enable_bits(nb_dev, 0x40 | gpp_sb_sel, 1 << 6, 1 << 6);
+
+ /* Step 21: Register Locking PCIE Misc. Late Core sttting - Must move somewhere do PciInitLate FIXME */
+ /* Lock HWInit Register */
+ //set_pcie_enable_bits(nb_dev, 0x10 | gpp_sb_sel, 1 << 0, 1 << 0);
+
+ /* Step 27: LCLK Gating */
+ //EnableLclkGating(dev);
+
+ /* Set Common Clock */
+ /* If dev present, set PcieCapPtr+0x10, BIT6);
+ * set dev 0x68,bit 6
+ * retrain link, set dev, 0x68 bit 5;
+ * wait dev 0x6B bit3 clear
+ */
+
+ if (port == 8){
+ PciePowerOffGppPorts(nb_dev, dev, port); /* , This should be run for all ports that are not hotplug and don't detect devices */
+ }
+}
+
+/*****************************************
+* Compliant with CIM_33's PCIEConfigureGPPCore
+*****************************************/
+void config_gpp_core(device_t nb_dev, device_t sb_dev)
+{
+ u32 reg;
+ struct southbridge_amd_sr5650_config *cfg =
+ (struct southbridge_amd_sr5650_config *)nb_dev->chip_info;
+
+ reg = nbmisc_read_index(nb_dev, 0x20);
+ if (AtiPcieCfg.Config & PCIE_ENABLE_STATIC_DEV_REMAP)
+ reg &= 0xfffffffd; /* set bit1 = 0 */
+ else
+ reg |= 0x2; /* set bit1 = 1 */
+ nbmisc_write_index(nb_dev, 0x20, reg);
+
+ /* Must perform PCIE-GPP1, GPP2, GPP3a global reset anyway */
+ reg = nbmisc_read_index(nb_dev, 0x8);
+ reg |= (1 << 31) | (1 << 15) | (1 << 13); //asserts
+ nbmisc_write_index(nb_dev, 0x8, reg);
+ reg &= ~((1 << 31) | (1 << 15) | (1 << 13)); //De-aserts
+ nbmisc_write_index(nb_dev, 0x8, reg);
+
+ reg = nbmisc_read_index(nb_dev, 0x67); /* get STRAP_BIF_LINK_CONFIG at bit 0-4 */
+ if (cfg->gpp3a_configuration != (reg & 0x1F))
+ switching_gpp3a_configurations(nb_dev, sb_dev);
+ reg = nbmisc_read_index(nb_dev, 0x8); /* get MULTIPORT_CONFIG_GPP1 MULTIPORT_CONFIG_CONFIG_GPP2 at bit 8,9 */
+ if ((cfg->gpp1_configuration << 8) != (reg & (1 << 8)))
+ switching_gpp1_configurations(nb_dev, sb_dev);
+ if ((cfg->gpp2_configuration << 9) != (reg & (1 << 9)))
+ switching_gpp2_configurations(nb_dev, sb_dev);
+ ValidatePortEn(nb_dev);
+}
+
+/*****************************************
+* Compliant with CIM_33's PCIEMiscClkProg
+*****************************************/
+void pcie_config_misc_clk(device_t nb_dev)
+{
+ u32 reg;
+ //struct bus pbus; /* fake bus for dev0 fun1 */
+
+ reg = pci_read_config32(nb_dev, 0x4c);
+ reg |= 1 << 0;
+ pci_write_config32(nb_dev, 0x4c, reg);
+
+#if 0 /* TODO: Check the mics clock later. */
+ if (AtiPcieCfg.Config & PCIE_GFX_CLK_GATING) {
+ /* TXCLK Clock Gating */
+ set_nbmisc_enable_bits(nb_dev, 0x07, 3 << 0, 3 << 0);
+ set_nbmisc_enable_bits(nb_dev, 0x07, 1 << 22, 1 << 22);
+ set_pcie_enable_bits(nb_dev, 0x11 | PCIE_CORE_INDEX_GFX, (3 << 6) | (~0xf), 3 << 6);
+
+ /* LCLK Clock Gating */
+ reg = pci_cf8_conf1.read32(&pbus, 0, 1, 0x94);
+ reg &= ~(1 << 16);
+ pci_cf8_conf1.write32(&pbus, 0, 1, 0x94, reg);
+ }
+
+ if (AtiPcieCfg.Config & PCIE_GPP_CLK_GATING) {
+ /* TXCLK Clock Gating */
+ set_nbmisc_enable_bits(nb_dev, 0x07, 3 << 4, 3 << 4);
+ set_nbmisc_enable_bits(nb_dev, 0x07, 1 << 22, 1 << 22);
+ set_pcie_enable_bits(nb_dev, 0x11 | PCIE_CORE_INDEX_SB, (3 << 6) | (~0xf), 3 << 6);
+
+ /* LCLK Clock Gating */
+ reg = pci_cf8_conf1.read32(&pbus, 0, 1, 0x94);
+ reg &= ~(1 << 24);
+ pci_cf8_conf1.write32(&pbus, 0, 1, 0x94, reg);
+ }
+#endif
+
+ reg = pci_read_config32(nb_dev, 0x4c);
+ reg &= ~(1 << 0);
+ pci_write_config32(nb_dev, 0x4c, reg);
+}
projects / coreboot.git / blobdiff