/* Table structure from Linux kernel (the ACPI tables are under the
BSD license) */
-#define ACPI_TABLE_HEADER_DEF /* ACPI common table header */ \
- u32 signature; /* ACPI signature (4 ASCII characters) */ \
- u32 length; /* Length of table, in bytes, including header */ \
- u8 revision; /* ACPI Specification minor version # */ \
- u8 checksum; /* To make sum of entire table == 0 */ \
- u8 oem_id [6]; /* OEM identification */ \
- u8 oem_table_id [8]; /* OEM table identification */ \
- u32 oem_revision; /* OEM revision number */ \
- u8 asl_compiler_id [4]; /* ASL compiler vendor ID */ \
- u32 asl_compiler_revision; /* ASL compiler revision number */
-
-
struct acpi_table_header /* ACPI common table header */
{
ACPI_TABLE_HEADER_DEF
} PACKED;
-/*
- * ACPI 1.0 Fixed ACPI Description Table (FADT)
- */
-#define FACP_SIGNATURE 0x50434146 // FACP
-struct fadt_descriptor_rev1
-{
- ACPI_TABLE_HEADER_DEF /* ACPI common table header */
- u32 firmware_ctrl; /* Physical address of FACS */
- u32 dsdt; /* Physical address of DSDT */
- u8 model; /* System Interrupt Model */
- u8 reserved1; /* Reserved */
- u16 sci_int; /* System vector of SCI interrupt */
- u32 smi_cmd; /* Port address of SMI command port */
- u8 acpi_enable; /* Value to write to smi_cmd to enable ACPI */
- u8 acpi_disable; /* Value to write to smi_cmd to disable ACPI */
- u8 S4bios_req; /* Value to write to SMI CMD to enter S4BIOS state */
- u8 reserved2; /* Reserved - must be zero */
- u32 pm1a_evt_blk; /* Port address of Power Mgt 1a acpi_event Reg Blk */
- u32 pm1b_evt_blk; /* Port address of Power Mgt 1b acpi_event Reg Blk */
- u32 pm1a_cnt_blk; /* Port address of Power Mgt 1a Control Reg Blk */
- u32 pm1b_cnt_blk; /* Port address of Power Mgt 1b Control Reg Blk */
- u32 pm2_cnt_blk; /* Port address of Power Mgt 2 Control Reg Blk */
- u32 pm_tmr_blk; /* Port address of Power Mgt Timer Ctrl Reg Blk */
- u32 gpe0_blk; /* Port addr of General Purpose acpi_event 0 Reg Blk */
- u32 gpe1_blk; /* Port addr of General Purpose acpi_event 1 Reg Blk */
- u8 pm1_evt_len; /* Byte length of ports at pm1_x_evt_blk */
- u8 pm1_cnt_len; /* Byte length of ports at pm1_x_cnt_blk */
- u8 pm2_cnt_len; /* Byte Length of ports at pm2_cnt_blk */
- u8 pm_tmr_len; /* Byte Length of ports at pm_tm_blk */
- u8 gpe0_blk_len; /* Byte Length of ports at gpe0_blk */
- u8 gpe1_blk_len; /* Byte Length of ports at gpe1_blk */
- u8 gpe1_base; /* Offset in gpe model where gpe1 events start */
- u8 reserved3; /* Reserved */
- u16 plvl2_lat; /* Worst case HW latency to enter/exit C2 state */
- u16 plvl3_lat; /* Worst case HW latency to enter/exit C3 state */
- u16 flush_size; /* Size of area read to flush caches */
- u16 flush_stride; /* Stride used in flushing caches */
- u8 duty_offset; /* Bit location of duty cycle field in p_cnt reg */
- u8 duty_width; /* Bit width of duty cycle field in p_cnt reg */
- u8 day_alrm; /* Index to day-of-month alarm in RTC CMOS RAM */
- u8 mon_alrm; /* Index to month-of-year alarm in RTC CMOS RAM */
- u8 century; /* Index to century in RTC CMOS RAM */
- u8 reserved4; /* Reserved */
- u8 reserved4a; /* Reserved */
- u8 reserved4b; /* Reserved */
-#if 0
- u32 wb_invd : 1; /* The wbinvd instruction works properly */
- u32 wb_invd_flush : 1; /* The wbinvd flushes but does not invalidate */
- u32 proc_c1 : 1; /* All processors support C1 state */
- u32 plvl2_up : 1; /* C2 state works on MP system */
- u32 pwr_button : 1; /* Power button is handled as a generic feature */
- u32 sleep_button : 1; /* Sleep button is handled as a generic feature, or not present */
- u32 fixed_rTC : 1; /* RTC wakeup stat not in fixed register space */
- u32 rtcs4 : 1; /* RTC wakeup stat not possible from S4 */
- u32 tmr_val_ext : 1; /* The tmr_val width is 32 bits (0 = 24 bits) */
- u32 reserved5 : 23; /* Reserved - must be zero */
-#else
- u32 flags;
-#endif
-} PACKED;
-
/*
* MADT values and structures
*/
extern struct rsdp_descriptor *RsdpAddr;
+/* Table structure from Linux kernel (the ACPI tables are under the
+ BSD license) */
+
+#define ACPI_TABLE_HEADER_DEF /* ACPI common table header */ \
+ u32 signature; /* ACPI signature (4 ASCII characters) */ \
+ u32 length; /* Length of table, in bytes, including header */ \
+ u8 revision; /* ACPI Specification minor version # */ \
+ u8 checksum; /* To make sum of entire table == 0 */ \
+ u8 oem_id [6]; /* OEM identification */ \
+ u8 oem_table_id [8]; /* OEM table identification */ \
+ u32 oem_revision; /* OEM revision number */ \
+ u8 asl_compiler_id [4]; /* ASL compiler vendor ID */ \
+ u32 asl_compiler_revision; /* ASL compiler revision number */
+
+
+/*
+ * ACPI 1.0 Fixed ACPI Description Table (FADT)
+ */
+#define FACP_SIGNATURE 0x50434146 // FACP
+struct fadt_descriptor_rev1
+{
+ ACPI_TABLE_HEADER_DEF /* ACPI common table header */
+ u32 firmware_ctrl; /* Physical address of FACS */
+ u32 dsdt; /* Physical address of DSDT */
+ u8 model; /* System Interrupt Model */
+ u8 reserved1; /* Reserved */
+ u16 sci_int; /* System vector of SCI interrupt */
+ u32 smi_cmd; /* Port address of SMI command port */
+ u8 acpi_enable; /* Value to write to smi_cmd to enable ACPI */
+ u8 acpi_disable; /* Value to write to smi_cmd to disable ACPI */
+ u8 S4bios_req; /* Value to write to SMI CMD to enter S4BIOS state */
+ u8 reserved2; /* Reserved - must be zero */
+ u32 pm1a_evt_blk; /* Port address of Power Mgt 1a acpi_event Reg Blk */
+ u32 pm1b_evt_blk; /* Port address of Power Mgt 1b acpi_event Reg Blk */
+ u32 pm1a_cnt_blk; /* Port address of Power Mgt 1a Control Reg Blk */
+ u32 pm1b_cnt_blk; /* Port address of Power Mgt 1b Control Reg Blk */
+ u32 pm2_cnt_blk; /* Port address of Power Mgt 2 Control Reg Blk */
+ u32 pm_tmr_blk; /* Port address of Power Mgt Timer Ctrl Reg Blk */
+ u32 gpe0_blk; /* Port addr of General Purpose acpi_event 0 Reg Blk */
+ u32 gpe1_blk; /* Port addr of General Purpose acpi_event 1 Reg Blk */
+ u8 pm1_evt_len; /* Byte length of ports at pm1_x_evt_blk */
+ u8 pm1_cnt_len; /* Byte length of ports at pm1_x_cnt_blk */
+ u8 pm2_cnt_len; /* Byte Length of ports at pm2_cnt_blk */
+ u8 pm_tmr_len; /* Byte Length of ports at pm_tm_blk */
+ u8 gpe0_blk_len; /* Byte Length of ports at gpe0_blk */
+ u8 gpe1_blk_len; /* Byte Length of ports at gpe1_blk */
+ u8 gpe1_base; /* Offset in gpe model where gpe1 events start */
+ u8 reserved3; /* Reserved */
+ u16 plvl2_lat; /* Worst case HW latency to enter/exit C2 state */
+ u16 plvl3_lat; /* Worst case HW latency to enter/exit C3 state */
+ u16 flush_size; /* Size of area read to flush caches */
+ u16 flush_stride; /* Stride used in flushing caches */
+ u8 duty_offset; /* Bit location of duty cycle field in p_cnt reg */
+ u8 duty_width; /* Bit width of duty cycle field in p_cnt reg */
+ u8 day_alrm; /* Index to day-of-month alarm in RTC CMOS RAM */
+ u8 mon_alrm; /* Index to month-of-year alarm in RTC CMOS RAM */
+ u8 century; /* Index to century in RTC CMOS RAM */
+ u8 reserved4; /* Reserved */
+ u8 reserved4a; /* Reserved */
+ u8 reserved4b; /* Reserved */
+#if 0
+ u32 wb_invd : 1; /* The wbinvd instruction works properly */
+ u32 wb_invd_flush : 1; /* The wbinvd flushes but does not invalidate */
+ u32 proc_c1 : 1; /* All processors support C1 state */
+ u32 plvl2_up : 1; /* C2 state works on MP system */
+ u32 pwr_button : 1; /* Power button is handled as a generic feature */
+ u32 sleep_button : 1; /* Sleep button is handled as a generic feature, or not present */
+ u32 fixed_rTC : 1; /* RTC wakeup stat not in fixed register space */
+ u32 rtcs4 : 1; /* RTC wakeup stat not possible from S4 */
+ u32 tmr_val_ext : 1; /* The tmr_val width is 32 bits (0 = 24 bits) */
+ u32 reserved5 : 23; /* Reserved - must be zero */
+#else
+ u32 flags;
+#endif
+} PACKED;
+
#endif // acpi.h
projects / seabios.git / commitdiff