#include "disk.h" // DISK_RET_SUCCESS
#include "config.h" // CONFIG_FLOPPY
#include "biosvar.h" // SET_BDA
-#include "util.h" // irq_disable
+#include "util.h" // wait_irq
#include "cmos.h" // inb_cmos
#include "pic.h" // eoi_pic1
#include "bregs.h" // struct bregs
+#include "boot.h" // boot_add_floppy
+#include "pci.h" // pci_to_bdf
+#include "pci_ids.h" // PCI_CLASS_BRIDGE_ISA
-#define BX_FLOPPY_ON_CNT 37 /* 2 seconds */
+#define FLOPPY_SIZE_CODE 0x02 // 512 byte sectors
+#define FLOPPY_DATALEN 0xff // Not used - because size code is 0x02
+#define FLOPPY_MOTOR_TICKS 37 // ~2 seconds
+#define FLOPPY_FILLBYTE 0xf6
+#define FLOPPY_GAPLEN 0x1B
+#define FLOPPY_FORMAT_GAPLEN 0x6c
// New diskette parameter table adding 3 parameters from IBM
// Since no provisions are made for multiple drive types, most
// values in this table are ignored. I set parameters for 1.44M
// floppy here
-struct floppy_ext_dbt_s diskette_param_table2 VAR16_32 = {
+struct floppy_ext_dbt_s diskette_param_table2 VAR16VISIBLE = {
.dbt = {
- .specify1 = 0xAF,
- .specify2 = 0x02, // head load time 0000001, DMA used
- .shutoff_ticks = 0x25,
- .bps_code = 0x02,
+ .specify1 = 0xAF, // step rate 12ms, head unload 240ms
+ .specify2 = 0x02, // head load time 4ms, DMA used
+ .shutoff_ticks = FLOPPY_MOTOR_TICKS, // ~2 seconds
+ .bps_code = FLOPPY_SIZE_CODE,
.sectors = 18,
- .interblock_len = 0x1B,
- .data_len = 0xFF,
- .gap_len = 0x6C,
- .fill_byte = 0xF6,
- .settle_time = 0x0F,
- .startup_time = 0x08,
+ .interblock_len = FLOPPY_GAPLEN,
+ .data_len = FLOPPY_DATALEN,
+ .gap_len = FLOPPY_FORMAT_GAPLEN,
+ .fill_byte = FLOPPY_FILLBYTE,
+ .settle_time = 0x0F, // 15ms
+ .startup_time = 0x08, // 1 second
},
.max_track = 79, // maximum track
.data_rate = 0, // data transfer rate
// floppy here
struct floppy_dbt_s diskette_param_table VAR16FIXED(0xefc7) = {
.specify1 = 0xAF,
- .specify2 = 0x02, // head load time 0000001, DMA used
- .shutoff_ticks = 0x25,
- .bps_code = 0x02,
+ .specify2 = 0x02,
+ .shutoff_ticks = FLOPPY_MOTOR_TICKS,
+ .bps_code = FLOPPY_SIZE_CODE,
.sectors = 18,
- .interblock_len = 0x1B,
- .data_len = 0xFF,
- .gap_len = 0x6C,
- .fill_byte = 0xF6,
+ .interblock_len = FLOPPY_GAPLEN,
+ .data_len = FLOPPY_DATALEN,
+ .gap_len = FLOPPY_FORMAT_GAPLEN,
+ .fill_byte = FLOPPY_FILLBYTE,
.settle_time = 0x0F,
.startup_time = 0x08,
};
-u8 FloppyTypes[2] VAR16_32;
-
struct floppyinfo_s {
struct chs_s chs;
u8 config_data;
u8 media_state;
};
-struct floppyinfo_s FloppyInfo[] VAR16_32 = {
+struct floppyinfo_s FloppyInfo[] VAR16VISIBLE = {
// Unknown
{ {0, 0, 0}, 0x00, 0x00},
// 1 - 360KB, 5.25" - 2 heads, 40 tracks, 9 sectors
{ {2, 40, 8}, 0x00, 0x27},
};
-static void
-addFloppy(int floppyid, int ftype)
+struct drive_s *
+init_floppy(int floppyid, int ftype)
{
if (ftype <= 0 || ftype >= ARRAY_SIZE(FloppyInfo)) {
dprintf(1, "Bad floppy type %d\n", ftype);
- return;
+ return NULL;
}
- int driveid = Drives.drivecount;
- if (driveid >= ARRAY_SIZE(Drives.drives))
- return;
- Drives.drivecount++;
- memset(&Drives.drives[driveid], 0, sizeof(Drives.drives[0]));
- Drives.drives[driveid].cntl_id = floppyid;
- FloppyTypes[floppyid] = ftype;
-
- memcpy(&Drives.drives[driveid].lchs, &FloppyInfo[ftype].chs
+ struct drive_s *drive_g = malloc_fseg(sizeof(*drive_g));
+ if (!drive_g) {
+ warn_noalloc();
+ return NULL;
+ }
+ memset(drive_g, 0, sizeof(*drive_g));
+ drive_g->cntl_id = floppyid;
+ drive_g->type = DTYPE_FLOPPY;
+ drive_g->blksize = DISK_SECTOR_SIZE;
+ drive_g->floppy_type = ftype;
+ drive_g->sectors = (u64)-1;
+
+ memcpy(&drive_g->lchs, &FloppyInfo[ftype].chs
, sizeof(FloppyInfo[ftype].chs));
+ return drive_g;
+}
- map_floppy_drive(driveid);
+static void
+addFloppy(int floppyid, int ftype)
+{
+ struct drive_s *drive_g = init_floppy(floppyid, ftype);
+ if (!drive_g)
+ return;
+ char *desc = znprintf(MAXDESCSIZE, "Floppy [drive %c]", 'A' + floppyid);
+ struct pci_device *pci = pci_find_class(PCI_CLASS_BRIDGE_ISA); /* isa-to-pci bridge */
+ int prio = bootprio_find_fdc_device(pci, PORT_FD_BASE, floppyid);
+ boot_add_floppy(drive_g, desc, prio);
}
void
-floppy_setup()
+floppy_setup(void)
{
if (! CONFIG_FLOPPY)
return;
dprintf(3, "init floppy drives\n");
- FloppyTypes[0] = FloppyTypes[1] = 0;
if (CONFIG_COREBOOT) {
// XXX - disable floppies on coreboot for now.
outb(0x02, PORT_DMA1_MASK_REG);
- enable_hwirq(6, entry_0e);
+ enable_hwirq(6, FUNC16(entry_0e));
}
-#define floppy_ret(regs, code) \
- __floppy_ret((regs), (code) | (__LINE__ << 8), __func__)
-
-void
-__floppy_ret(struct bregs *regs, u32 linecode, const char *fname)
+// Find a floppy type that matches a given image size.
+int
+find_floppy_type(u32 size)
{
- u8 code = linecode;
- SET_BDA(floppy_last_status, code);
- if (code)
- __set_code_fail(regs, linecode, fname);
- else
- set_code_success(regs);
+ int i;
+ for (i=1; i<ARRAY_SIZE(FloppyInfo); i++) {
+ struct chs_s *c = &FloppyInfo[i].chs;
+ if (c->cylinders * c->heads * c->spt * DISK_SECTOR_SIZE == size)
+ return i;
+ }
+ return -1;
}
****************************************************************/
static void
-floppy_reset_controller()
+floppy_reset_controller(void)
{
// Reset controller
u8 val8 = inb(PORT_FD_DOR);
}
static int
-wait_floppy_irq()
+wait_floppy_irq(void)
{
- irq_enable();
+ ASSERT16();
u8 v;
for (;;) {
- if (!GET_BDA(floppy_motor_counter)) {
- irq_disable();
+ if (!GET_BDA(floppy_motor_counter))
return -1;
- }
v = GET_BDA(floppy_recalibration_status);
if (v & FRS_TIMEOUT)
break;
- cpu_relax();
+ // Could use wait_irq() here, but that causes issues on
+ // bochs, so use yield() instead.
+ yield();
}
- irq_disable();
v &= ~FRS_TIMEOUT;
SET_BDA(floppy_recalibration_status, v);
outb(dor, PORT_FD_DOR);
// reset the disk motor timeout value of INT 08
- SET_BDA(floppy_motor_counter, BX_FLOPPY_ON_CNT);
+ SET_BDA(floppy_motor_counter, FLOPPY_MOTOR_TICKS);
// wait for drive readiness
while ((inb(PORT_FD_STATUS) & 0xc0) != 0x80)
}
static int
-floppy_cmd(struct bregs *regs, u16 count, u8 *cmd, u8 cmdlen)
+floppy_cmd(struct disk_op_s *op, u16 count, u8 *cmd, u8 cmdlen)
{
// es:bx = pointer to where to place information from diskette
- u32 addr = (u32)MAKE_FLATPTR(regs->es, regs->bx);
+ u32 addr = (u32)op->buf_fl;
// check for 64K boundary overrun
- u32 last_addr = addr + count;
- if ((addr >> 16) != (last_addr >> 16)) {
- floppy_ret(regs, DISK_RET_EBOUNDARY);
- return -1;
- }
+ u16 end = count - 1;
+ u32 last_addr = addr + end;
+ if ((addr >> 16) != (last_addr >> 16))
+ return DISK_RET_EBOUNDARY;
u8 mode_register = 0x4a; // single mode, increment, autoinit disable,
if (cmd[0] == 0xe6)
outb(addr, PORT_DMA_ADDR_2);
outb(addr>>8, PORT_DMA_ADDR_2);
outb(0x00, PORT_DMA1_CLEAR_FF_REG); // clear flip-flop
- outb(count, PORT_DMA_CNT_2);
- outb(count>>8, PORT_DMA_CNT_2);
+ outb(end, PORT_DMA_CNT_2);
+ outb(end>>8, PORT_DMA_CNT_2);
// port 0b: DMA-1 Mode Register
// transfer type=write, channel 2
outb(0x02, PORT_DMA1_MASK_REG); // unmask channel 2
int ret = floppy_pio(cmd, cmdlen);
- if (ret) {
- floppy_ret(regs, DISK_RET_ETIMEOUT);
- return -1;
- }
+ if (ret)
+ return DISK_RET_ETIMEOUT;
// check port 3f4 for accessibility to status bytes
- if ((inb(PORT_FD_STATUS) & 0xc0) != 0xc0) {
- floppy_ret(regs, DISK_RET_ECONTROLLER);
- return -1;
- }
+ if ((inb(PORT_FD_STATUS) & 0xc0) != 0xc0)
+ return DISK_RET_ECONTROLLER;
// read 7 return status bytes from controller
u8 i;
SET_BDA(floppy_return_status[i], v);
}
- return 0;
+ return DISK_RET_SUCCESS;
}
}
static int
-floppy_media_sense(u8 floppyid)
+floppy_media_sense(struct drive_s *drive_g)
{
// for now cheat and get drive type from CMOS,
// assume media is same as drive type
// 110 reserved
// 111 all other formats/drives
- u8 ftype = GET_GLOBAL(FloppyTypes[floppyid]);
+ u8 ftype = GET_GLOBAL(drive_g->floppy_type);
SET_BDA(floppy_last_data_rate, GET_GLOBAL(FloppyInfo[ftype].config_data));
+ u8 floppyid = GET_GLOBAL(drive_g->cntl_id);
SET_BDA(floppy_media_state[floppyid]
, GET_GLOBAL(FloppyInfo[ftype].media_state));
- return 0;
+ return DISK_RET_SUCCESS;
}
static int
-check_recal_drive(struct bregs *regs, u8 floppyid)
+check_recal_drive(struct drive_s *drive_g)
{
+ u8 floppyid = GET_GLOBAL(drive_g->cntl_id);
if ((GET_BDA(floppy_recalibration_status) & (1<<floppyid))
&& (GET_BDA(floppy_media_state[floppyid]) & FMS_MEDIA_DRIVE_ESTABLISHED))
// Media is known.
- return 0;
+ return DISK_RET_SUCCESS;
// Recalibrate drive.
floppy_drive_recal(floppyid);
// Sense media.
- int ret = floppy_media_sense(floppyid);
- if (ret) {
- floppy_ret(regs, DISK_RET_EMEDIA);
- return -1;
- }
- return 0;
+ return floppy_media_sense(drive_g);
}
/****************************************************************
- * Floppy int13 handlers
+ * Floppy handlers
****************************************************************/
-// diskette controller reset
static void
-floppy_1300(struct bregs *regs, u8 driveid)
+lba2chs(struct disk_op_s *op, u8 *track, u8 *sector, u8 *head)
{
- u8 floppyid = GET_GLOBAL(Drives.drives[driveid].cntl_id);
- set_diskette_current_cyl(floppyid, 0); // current cylinder
- floppy_ret(regs, DISK_RET_SUCCESS);
+ u32 lba = op->lba;
+
+ u32 tmp = lba + 1;
+ u16 nlspt = GET_GLOBAL(op->drive_g->lchs.spt);
+ *sector = tmp % nlspt;
+
+ tmp /= nlspt;
+ u16 nlh = GET_GLOBAL(op->drive_g->lchs.heads);
+ *head = tmp % nlh;
+
+ tmp /= nlh;
+ *track = tmp;
}
-// Read Diskette Status
-static void
-floppy_1301(struct bregs *regs, u8 driveid)
+// diskette controller reset
+static int
+floppy_reset(struct disk_op_s *op)
{
- u8 v = GET_BDA(floppy_last_status);
- regs->ah = v;
- set_cf(regs, v);
+ u8 floppyid = GET_GLOBAL(op->drive_g->cntl_id);
+ set_diskette_current_cyl(floppyid, 0); // current cylinder
+ return DISK_RET_SUCCESS;
}
// Read Diskette Sectors
-static void
-floppy_1302(struct bregs *regs, u8 driveid)
+static int
+floppy_read(struct disk_op_s *op)
{
- u8 floppyid = GET_GLOBAL(Drives.drives[driveid].cntl_id);
- if (check_recal_drive(regs, floppyid))
+ int res = check_recal_drive(op->drive_g);
+ if (res)
goto fail;
- u8 num_sectors = regs->al;
- u8 track = regs->ch;
- u8 sector = regs->cl;
- u8 head = regs->dh;
-
- if (head > 1 || sector == 0 || num_sectors == 0
- || track > 79 || num_sectors > 72) {
- floppy_ret(regs, DISK_RET_EPARAM);
- goto fail;
- }
+ u8 track, sector, head;
+ lba2chs(op, &track, §or, &head);
// send read-normal-data command (9 bytes) to controller
+ u8 floppyid = GET_GLOBAL(op->drive_g->cntl_id);
u8 data[12];
data[0] = 0xe6; // e6: read normal data
data[1] = (head << 2) | floppyid; // HD DR1 DR2
data[2] = track;
data[3] = head;
data[4] = sector;
- data[5] = 2; // 512 byte sector size
- data[6] = sector + num_sectors - 1; // last sector to read on track
- data[7] = 0; // Gap length
- data[8] = 0xff; // Gap length
+ data[5] = FLOPPY_SIZE_CODE;
+ data[6] = sector + op->count - 1; // last sector to read on track
+ data[7] = FLOPPY_GAPLEN;
+ data[8] = FLOPPY_DATALEN;
- int ret = floppy_cmd(regs, (num_sectors * 512) - 1, data, 9);
- if (ret)
+ res = floppy_cmd(op, op->count * DISK_SECTOR_SIZE, data, 9);
+ if (res)
goto fail;
if (data[0] & 0xc0) {
- floppy_ret(regs, DISK_RET_ECONTROLLER);
+ res = DISK_RET_ECONTROLLER;
goto fail;
}
// ??? should track be new val from return_status[3] ?
set_diskette_current_cyl(floppyid, track);
- // AL = number of sectors read (same value as passed)
- floppy_ret(regs, DISK_RET_SUCCESS);
- return;
+ return DISK_RET_SUCCESS;
fail:
- regs->al = 0; // no sectors read
+ op->count = 0; // no sectors read
+ return res;
}
// Write Diskette Sectors
-static void
-floppy_1303(struct bregs *regs, u8 driveid)
+static int
+floppy_write(struct disk_op_s *op)
{
- u8 floppyid = GET_GLOBAL(Drives.drives[driveid].cntl_id);
- if (check_recal_drive(regs, floppyid))
+ int res = check_recal_drive(op->drive_g);
+ if (res)
goto fail;
- u8 num_sectors = regs->al;
- u8 track = regs->ch;
- u8 sector = regs->cl;
- u8 head = regs->dh;
-
- if (head > 1 || sector == 0 || num_sectors == 0
- || track > 79 || num_sectors > 72) {
- floppy_ret(regs, DISK_RET_EPARAM);
- goto fail;
- }
+ u8 track, sector, head;
+ lba2chs(op, &track, §or, &head);
// send write-normal-data command (9 bytes) to controller
+ u8 floppyid = GET_GLOBAL(op->drive_g->cntl_id);
u8 data[12];
data[0] = 0xc5; // c5: write normal data
data[1] = (head << 2) | floppyid; // HD DR1 DR2
data[2] = track;
data[3] = head;
data[4] = sector;
- data[5] = 2; // 512 byte sector size
- data[6] = sector + num_sectors - 1; // last sector to write on track
- data[7] = 0; // Gap length
- data[8] = 0xff; // Gap length
+ data[5] = FLOPPY_SIZE_CODE;
+ data[6] = sector + op->count - 1; // last sector to write on track
+ data[7] = FLOPPY_GAPLEN;
+ data[8] = FLOPPY_DATALEN;
- int ret = floppy_cmd(regs, (num_sectors * 512) - 1, data, 9);
- if (ret)
+ res = floppy_cmd(op, op->count * DISK_SECTOR_SIZE, data, 9);
+ if (res)
goto fail;
if (data[0] & 0xc0) {
if (data[1] & 0x02)
- floppy_ret(regs, DISK_RET_EWRITEPROTECT);
+ res = DISK_RET_EWRITEPROTECT;
else
- floppy_ret(regs, DISK_RET_ECONTROLLER);
+ res = DISK_RET_ECONTROLLER;
goto fail;
}
// ??? should track be new val from return_status[3] ?
set_diskette_current_cyl(floppyid, track);
- // AL = number of sectors read (same value as passed)
- floppy_ret(regs, DISK_RET_SUCCESS);
- return;
+ return DISK_RET_SUCCESS;
fail:
- regs->al = 0; // no sectors read
+ op->count = 0; // no sectors read
+ return res;
}
// Verify Diskette Sectors
-static void
-floppy_1304(struct bregs *regs, u8 driveid)
+static int
+floppy_verify(struct disk_op_s *op)
{
- u8 floppyid = GET_GLOBAL(Drives.drives[driveid].cntl_id);
- if (check_recal_drive(regs, floppyid))
+ int res = check_recal_drive(op->drive_g);
+ if (res)
goto fail;
- u8 num_sectors = regs->al;
- u8 track = regs->ch;
- u8 sector = regs->cl;
- u8 head = regs->dh;
-
- if (head > 1 || sector == 0 || num_sectors == 0
- || track > 79 || num_sectors > 72) {
- floppy_ret(regs, DISK_RET_EPARAM);
- goto fail;
- }
+ u8 track, sector, head;
+ lba2chs(op, &track, §or, &head);
// ??? should track be new val from return_status[3] ?
+ u8 floppyid = GET_GLOBAL(op->drive_g->cntl_id);
set_diskette_current_cyl(floppyid, track);
- // AL = number of sectors verified (same value as passed)
- floppy_ret(regs, DISK_RET_SUCCESS);
- return;
+ return DISK_RET_SUCCESS;
fail:
- regs->al = 0; // no sectors read
+ op->count = 0; // no sectors read
+ return res;
}
// format diskette track
-static void
-floppy_1305(struct bregs *regs, u8 driveid)
+static int
+floppy_format(struct disk_op_s *op)
{
- u8 floppyid = GET_GLOBAL(Drives.drives[driveid].cntl_id);
- dprintf(3, "floppy f05\n");
-
- if (check_recal_drive(regs, floppyid))
- return;
-
- u8 num_sectors = regs->al;
- u8 head = regs->dh;
+ int ret = check_recal_drive(op->drive_g);
+ if (ret)
+ return ret;
- if (head > 1 || num_sectors == 0 || num_sectors > 18) {
- floppy_ret(regs, DISK_RET_EPARAM);
- return;
- }
+ u8 head = op->lba;
// send format-track command (6 bytes) to controller
+ u8 floppyid = GET_GLOBAL(op->drive_g->cntl_id);
u8 data[12];
data[0] = 0x4d; // 4d: format track
data[1] = (head << 2) | floppyid; // HD DR1 DR2
- data[2] = 2; // 512 byte sector size
- data[3] = num_sectors; // number of sectors per track
- data[4] = 0; // Gap length
- data[5] = 0xf6; // Fill byte
+ data[2] = FLOPPY_SIZE_CODE;
+ data[3] = op->count; // number of sectors per track
+ data[4] = FLOPPY_FORMAT_GAPLEN;
+ data[5] = FLOPPY_FILLBYTE;
- int ret = floppy_cmd(regs, (num_sectors * 4) - 1, data, 6);
+ ret = floppy_cmd(op, op->count * 4, data, 6);
if (ret)
- return;
+ return ret;
if (data[0] & 0xc0) {
if (data[1] & 0x02)
- floppy_ret(regs, DISK_RET_EWRITEPROTECT);
- else
- floppy_ret(regs, DISK_RET_ECONTROLLER);
- return;
+ return DISK_RET_EWRITEPROTECT;
+ return DISK_RET_ECONTROLLER;
}
set_diskette_current_cyl(floppyid, 0);
- floppy_ret(regs, 0);
+ return DISK_RET_SUCCESS;
}
-// read diskette drive parameters
-static void
-floppy_1308(struct bregs *regs, u8 driveid)
+int
+process_floppy_op(struct disk_op_s *op)
{
- dprintf(3, "floppy f08\n");
-
- regs->ax = 0;
- regs->dx = GET_GLOBAL(Drives.floppycount);
-
- u8 floppyid = GET_GLOBAL(Drives.drives[driveid].cntl_id);
- u8 ftype = GET_GLOBAL(FloppyTypes[floppyid]);
- regs->bx = ftype;
-
- u16 nlc = GET_GLOBAL(Drives.drives[driveid].lchs.cylinders);
- u16 nlh = GET_GLOBAL(Drives.drives[driveid].lchs.heads);
- u16 nlspt = GET_GLOBAL(Drives.drives[driveid].lchs.spt);
- nlc -= 1; // 0 based
- nlh -= 1;
-
- regs->ch = nlc & 0xff;
- regs->cl = ((nlc >> 2) & 0xc0) | (nlspt & 0x3f);
- regs->dh = nlh;
-
- /* set es & di to point to 11 byte diskette param table in ROM */
- regs->es = SEG_BIOS;
- regs->di = (u32)&diskette_param_table2;
- /* disk status not changed upon success */
- set_success(regs);
-}
-
-// read diskette drive type
-static void
-floppy_1315(struct bregs *regs, u8 driveid)
-{
- dprintf(6, "floppy f15\n");
- regs->ah = 1;
- set_success(regs);
-}
-
-// get diskette change line status
-static void
-floppy_1316(struct bregs *regs, u8 driveid)
-{
- floppy_ret(regs, DISK_RET_ECHANGED);
-}
-
-static void
-floppy_13XX(struct bregs *regs, u8 driveid)
-{
- floppy_ret(regs, DISK_RET_EPARAM);
-}
+ if (!CONFIG_FLOPPY)
+ return 0;
-void
-floppy_13(struct bregs *regs, u8 driveid)
-{
- switch (regs->ah) {
- case 0x00: floppy_1300(regs, driveid); break;
- case 0x01: floppy_1301(regs, driveid); break;
- case 0x02: floppy_1302(regs, driveid); break;
- case 0x03: floppy_1303(regs, driveid); break;
- case 0x04: floppy_1304(regs, driveid); break;
- case 0x05: floppy_1305(regs, driveid); break;
- case 0x08: floppy_1308(regs, driveid); break;
- case 0x15: floppy_1315(regs, driveid); break;
- case 0x16: floppy_1316(regs, driveid); break;
- default: floppy_13XX(regs, driveid); break;
+ switch (op->command) {
+ case CMD_RESET:
+ return floppy_reset(op);
+ case CMD_READ:
+ return floppy_read(op);
+ case CMD_WRITE:
+ return floppy_write(op);
+ case CMD_VERIFY:
+ return floppy_verify(op);
+ case CMD_FORMAT:
+ return floppy_format(op);
+ default:
+ op->count = 0;
+ return DISK_RET_EPARAM;
}
}
// INT 0Eh Diskette Hardware ISR Entry Point
void VISIBLE16
-handle_0e()
+handle_0e(void)
{
debug_isr(DEBUG_ISR_0e);
if (! CONFIG_FLOPPY)
// Called from int08 handler.
void
-floppy_tick()
+floppy_tick(void)
{
if (! CONFIG_FLOPPY)
return;
projects / seabios.git / blobdiff