Place .bss section in 0xf0000 segment.
[seabios.git] / src / config.h
1 #ifndef __CONFIG_H
2 #define __CONFIG_H
3
4 // Configuration definitions.
5
6 //#define CONFIG_APPNAME  "QEMU"
7 //#define CONFIG_CPUNAME8 "QEMUCPU "
8 //#define CONFIG_APPNAME6 "QEMU  "
9 //#define CONFIG_APPNAME4 "QEMU"
10 #define CONFIG_APPNAME  "Bochs"
11 #define CONFIG_CPUNAME8 "BOCHSCPU"
12 #define CONFIG_APPNAME6 "BOCHS "
13 #define CONFIG_APPNAME4 "BXPC"
14
15 // Configure as a coreboot payload.
16 #define CONFIG_COREBOOT 0
17
18 // Control how verbose debug output is.
19 #define CONFIG_DEBUG_LEVEL 1
20
21 // Send debugging information to serial port
22 #define CONFIG_DEBUG_SERIAL 0
23
24 // Support for int13 floppy drive access
25 #define CONFIG_FLOPPY_SUPPORT 1
26 // Support for int15c2 mouse calls
27 #define CONFIG_PS2_MOUSE 1
28 // Support for IDE disk code
29 #define CONFIG_ATA 1
30 // Support calling int155f on each keyboard press
31 #define CONFIG_KBD_CALL_INT15_4F 1
32 // Support for booting from a CD
33 #define CONFIG_CDROM_BOOT 1
34 // Support for emulating a boot CD as a floppy/harddrive
35 #define CONFIG_CDROM_EMU 1
36 // Support int 1a/b1 PCI BIOS calls
37 #define CONFIG_PCIBIOS 1
38 // Maximum number of PCI busses.
39 #define CONFIG_PCI_BUS_COUNT 2
40 // Support int 15/53 APM BIOS calls
41 #define CONFIG_APMBIOS 1
42 // Support int 19/18 system bootup support
43 #define CONFIG_BOOT 1
44 // Support int 14 parallel port calls
45 #define CONFIG_SERIAL 1
46 // Support int 17 parallel port calls
47 #define CONFIG_LPT 1
48 // Support int 16 keyboard calls
49 #define CONFIG_KEYBOARD 1
50 // Support finding and running option roms during post.
51 #define CONFIG_OPTIONROMS 1
52 // Support an interactive boot menu at end of post.
53 #define CONFIG_BOOTMENU 1
54
55 // Support generation of a PIR table in 0xf000 segment (for emulators)
56 #define CONFIG_PIRTABLE 1
57 // Support generation of MPTable (for emulators)
58 #define CONFIG_MPTABLE 1
59 // Support generation of SM BIOS tables (for emulators)
60 #define CONFIG_SMBIOS 1
61 // Support finding a UUID (for smbios) via "magic" outl sequence.
62 #define CONFIG_UUID_BACKDOOR 1
63 // Support generation of ACPI tables (for emulators)
64 #define CONFIG_ACPI 1
65 // Support bios callbacks specific to via vgabios.
66 #define CONFIG_VGAHOOKS 1
67
68 /* define it if the (emulated) hardware supports SMM mode */
69 #define CONFIG_USE_SMM 1
70
71 #define CONFIG_MAX_ATA_INTERFACES 4
72 #define CONFIG_MAX_ATA_DEVICES  (CONFIG_MAX_ATA_INTERFACES*2)
73
74 #define CONFIG_ACPI_DATA_SIZE 0x00010000L
75
76 #define CONFIG_MODEL_ID      0xFC
77 #define CONFIG_SUBMODEL_ID   0x00
78 #define CONFIG_BIOS_REVISION 0x01
79
80 // Various memory addresses used by the code.
81 #define BUILD_STACK_ADDR        0xfffe
82 #define BUILD_CPU_COUNT_ADDR    0xf000
83 #define BUILD_AP_BOOT_ADDR      0x10000
84 #define BUILD_BIOS_ADDR         0xf0000
85 #define BUILD_BIOS_SIZE         0x10000
86  /* 64 KB used to copy the BIOS to shadow RAM */
87 #define BUILD_BIOS_TMP_ADDR     0x30000
88
89 #define BUILD_PM_IO_BASE        0xb000
90 #define BUILD_SMB_IO_BASE       0xb100
91 #define BUILD_SMI_CMD_IO_ADDR   0xb2
92
93 // Start of fixed addresses in 0xf0000 segment.
94 #define BUILD_START_FIXED       0xe050
95
96 // Important 16-bit segments
97 #define SEG_BIOS     0xf000
98 #define SEG_EBDA     0x9fc0
99 #define SEG_BDA      0x0000
100
101 // Debugging levels.  If non-zero and CONFIG_DEBUG_LEVEL is greater
102 // than the specified value, then the corresponding irq handler will
103 // report every enter event.
104 #define DEBUG_ISR_nmi 1
105 #define DEBUG_HDL_05 1
106 #define DEBUG_ISR_08 20
107 #define DEBUG_ISR_09 9
108 #define DEBUG_ISR_0e 9
109 #define DEBUG_HDL_10 20
110 #define DEBUG_HDL_11 1
111 #define DEBUG_HDL_12 1
112 #define DEBUG_HDL_13 10
113 #define DEBUG_HDL_14 1
114 #define DEBUG_HDL_15 9
115 #define DEBUG_HDL_16 9
116 #define DEBUG_HDL_17 1
117 #define DEBUG_HDL_18 1
118 #define DEBUG_HDL_19 1
119 #define DEBUG_HDL_1a 9
120 #define DEBUG_ISR_1c 20
121 #define DEBUG_HDL_40 1
122 #define DEBUG_ISR_70 9
123 #define DEBUG_ISR_74 9
124 #define DEBUG_ISR_75 1
125 #define DEBUG_ISR_76 10
126 #define DEBUG_ISR_hwirq 30
127
128 #endif // config.h