grml...
[seabios.git] / src / acpi.h
1 #ifndef __ACPI_H
2 #define __ACPI_H
3
4 #include "types.h" // u32
5
6 void acpi_bios_init(void);
7 u32 find_resume_vector(void);
8
9 #define RSDP_SIGNATURE 0x2052545020445352LL // "RSD PTR "
10
11 struct rsdp_descriptor {        /* Root System Descriptor Pointer */
12     u64 signature;              /* ACPI signature, contains "RSD PTR " */
13     u8  checksum;               /* To make sum of struct == 0 */
14     u8  oem_id [6];             /* OEM identification */
15     u8  revision;               /* Must be 0 for 1.0, 2 for 2.0 */
16     u32 rsdt_physical_address;  /* 32-bit physical address of RSDT */
17     u32 length;                 /* XSDT Length in bytes including hdr */
18     u64 xsdt_physical_address;  /* 64-bit physical address of XSDT */
19     u8  extended_checksum;      /* Checksum of entire table */
20     u8  reserved [3];           /* Reserved field must be 0 */
21 };
22
23 extern struct rsdp_descriptor *RsdpAddr;
24
25 /* Table structure from Linux kernel (the ACPI tables are under the
26    BSD license) */
27
28 #define ACPI_TABLE_HEADER_DEF   /* ACPI common table header */ \
29     u32 signature;          /* ACPI signature (4 ASCII characters) */ \
30     u32 length;                 /* Length of table, in bytes, including header */ \
31     u8  revision;               /* ACPI Specification minor version # */ \
32     u8  checksum;               /* To make sum of entire table == 0 */ \
33     u8  oem_id [6];             /* OEM identification */ \
34     u8  oem_table_id [8];       /* OEM table identification */ \
35     u32 oem_revision;           /* OEM revision number */ \
36     u8  asl_compiler_id [4];    /* ASL compiler vendor ID */ \
37     u32 asl_compiler_revision;  /* ASL compiler revision number */
38
39
40 /*
41  * ACPI 1.0 Fixed ACPI Description Table (FADT)
42  */
43 #define FACP_SIGNATURE 0x50434146 // FACP
44 struct fadt_descriptor_rev1
45 {
46     ACPI_TABLE_HEADER_DEF     /* ACPI common table header */
47     u32 firmware_ctrl;          /* Physical address of FACS */
48     u32 dsdt;                   /* Physical address of DSDT */
49     u8  model;                  /* System Interrupt Model */
50     u8  reserved1;              /* Reserved */
51     u16 sci_int;                /* System vector of SCI interrupt */
52     u32 smi_cmd;                /* Port address of SMI command port */
53     u8  acpi_enable;            /* Value to write to smi_cmd to enable ACPI */
54     u8  acpi_disable;           /* Value to write to smi_cmd to disable ACPI */
55     u8  S4bios_req;             /* Value to write to SMI CMD to enter S4BIOS state */
56     u8  reserved2;              /* Reserved - must be zero */
57     u32 pm1a_evt_blk;           /* Port address of Power Mgt 1a acpi_event Reg Blk */
58     u32 pm1b_evt_blk;           /* Port address of Power Mgt 1b acpi_event Reg Blk */
59     u32 pm1a_cnt_blk;           /* Port address of Power Mgt 1a Control Reg Blk */
60     u32 pm1b_cnt_blk;           /* Port address of Power Mgt 1b Control Reg Blk */
61     u32 pm2_cnt_blk;            /* Port address of Power Mgt 2 Control Reg Blk */
62     u32 pm_tmr_blk;             /* Port address of Power Mgt Timer Ctrl Reg Blk */
63     u32 gpe0_blk;               /* Port addr of General Purpose acpi_event 0 Reg Blk */
64     u32 gpe1_blk;               /* Port addr of General Purpose acpi_event 1 Reg Blk */
65     u8  pm1_evt_len;            /* Byte length of ports at pm1_x_evt_blk */
66     u8  pm1_cnt_len;            /* Byte length of ports at pm1_x_cnt_blk */
67     u8  pm2_cnt_len;            /* Byte Length of ports at pm2_cnt_blk */
68     u8  pm_tmr_len;             /* Byte Length of ports at pm_tm_blk */
69     u8  gpe0_blk_len;           /* Byte Length of ports at gpe0_blk */
70     u8  gpe1_blk_len;           /* Byte Length of ports at gpe1_blk */
71     u8  gpe1_base;              /* Offset in gpe model where gpe1 events start */
72     u8  reserved3;              /* Reserved */
73     u16 plvl2_lat;              /* Worst case HW latency to enter/exit C2 state */
74     u16 plvl3_lat;              /* Worst case HW latency to enter/exit C3 state */
75     u16 flush_size;             /* Size of area read to flush caches */
76     u16 flush_stride;           /* Stride used in flushing caches */
77     u8  duty_offset;            /* Bit location of duty cycle field in p_cnt reg */
78     u8  duty_width;             /* Bit width of duty cycle field in p_cnt reg */
79     u8  day_alrm;               /* Index to day-of-month alarm in RTC CMOS RAM */
80     u8  mon_alrm;               /* Index to month-of-year alarm in RTC CMOS RAM */
81     u8  century;                /* Index to century in RTC CMOS RAM */
82     u8  reserved4;              /* Reserved */
83     u8  reserved4a;             /* Reserved */
84     u8  reserved4b;             /* Reserved */
85 #if 0
86     u32 wb_invd         : 1;    /* The wbinvd instruction works properly */
87     u32 wb_invd_flush   : 1;    /* The wbinvd flushes but does not invalidate */
88     u32 proc_c1         : 1;    /* All processors support C1 state */
89     u32 plvl2_up        : 1;    /* C2 state works on MP system */
90     u32 pwr_button      : 1;    /* Power button is handled as a generic feature */
91     u32 sleep_button    : 1;    /* Sleep button is handled as a generic feature, or not present */
92     u32 fixed_rTC       : 1;    /* RTC wakeup stat not in fixed register space */
93     u32 rtcs4           : 1;    /* RTC wakeup stat not possible from S4 */
94     u32 tmr_val_ext     : 1;    /* The tmr_val width is 32 bits (0 = 24 bits) */
95     u32 reserved5       : 23;   /* Reserved - must be zero */
96 #else
97     u32 flags;
98 #endif
99 } PACKED;
100
101 #endif // acpi.h