-print "Reading from the IRAM again..."
-data_re = cmdREAD(0x00030000, len(data_wr))
-print "Received data:", data_re, "Checksum:", last_checksum
-"""
-
-"""
-# see whats in the iram at the moment
-data_wr = []
-print "Reading from the IRAM..."
-data_re = cmdREAD(0x00030000, 0x10000-4)
-print "Received data:", data_re, "Checksum:", last_checksum
-"""
-
-"""
-# see whats in the dram at the moment
-data_wr = []
-print "Reading from the DRAM..."
-data_re = cmdREAD(0x0002C000, 0x10000-0xC000-4)
-print "Received data:", data_re, "Checksum:", last_checksum
-"""
-
-"""
-# blank the iram
-data_wr = []
-for i in range(0, 0x10000-4):
- value = 0
- data_wr.append(value)
-
-print "Writing", data_wr, "to the IRAM..."
-cmdWRITE(0x00030000, len(data_wr), data_wr)
-print "Received Checksum:", last_checksum
-print
-"""
-
-"""
-# blank the dram
-data_wr = []
-for i in range(0, 0x10000-0xC000-4):
- value = 0
- data_wr.append(value)
-
-print "Writing", data_wr, "to the DRAM..."
-cmdWRITE(0x0002C000, len(data_wr), data_wr)
-print "Received Checksum:", last_checksum
-print
-"""
-
-
-# write some data in the iram and try to execute it
-data_wr =[
- 0x9B,0x00,
- 0x0D,0x4e,
- 0xcf,0xf1,
- 0x16,0x01,
- 0x9b,0x05,
- 0x04,0xc7,
- 0xc1,0x06,
- 0x16,0x56,
- 0xe0,0xfb, #branch
- 0x9f,0xa0,0x9f,0xa0,0x9f,0xa0, #nop
- 0x9f,0xa0,0x9f,0xa0,0x9f,0xa0,
- 0x9f,0xa0,0x9f,0xa0,0x9f,0xa0,
- 0x9f,0xa0,0x9f,0xa0,0x9f,0xa0,
- 0x9f,0xa0,0x9f,0xa0,0x9f,0xa0,
- 0x9f,0xa0,0x9f,0xa0,0x9f,0xa0,
- 0x9f,0xa0,0x9f,0xa0,0x9f,0xa0]
-print "Writing", data_wr, "to the IRAM..."
-cmdWRITE(0x00030000, len(data_wr), data_wr)
-print "Received Checksum:", last_checksum
-print
-cmdCALL(0x00030000)
+print "Initializing serial port..."
+tty = SerialPort(DEVICE, 500, KERNEL_BAUDRATE)
+
+# check command line arguments
+if len(sys.argv) != 2:
+ print "Usage: " + sys.argv[0] + " [mhx-file]"
+ sys.exit(1)
+
+# read in data from mhx-file before starting
+try:
+ fp = open(sys.argv[1], "r")
+except IOError:
+ print sys.argv[0] + ": Error - couldn't open file " + sys.argv[1] + "!"
+ sys.exit(1)
+
+linecount = 0
+for line in fp:
+ linecount += 1
+ # get rid of newline characters
+ line = line.strip()
+
+ # we're only interested in S2 (data sequence with 3 address bytes) records by now
+ if line[0:2] == "S2":
+ byte_count = int(line[2:4], 16)
+ # just to get sure, check if byte count field is valid
+ if (len(line)-4) != (byte_count*2):
+ print sys.argv[0] + ": Warning - inavlid byte count field in " + \
+ sys.argv[1] + ":" + str(linecount) + ", skipping line!"
+ continue
+
+ # address and checksum bytes are not needed
+ byte_count -= 4
+ address = int(line[4:10], 16)
+ datastr = line[10:10+byte_count*2]
+
+ # convert data hex-byte-string to real byte data list
+ data = []
+ for i in range(0, len(datastr)/2):
+ data.append(int(datastr[2*i:2*i+2], 16))
+
+ # add flash sequence to our list
+ flashseqs.append(FlashSequence(address, data))
+
+print "The following flash sequences have been read in:"
+for seq in flashseqs:
+ print hex(seq.address) + ":", seq.data
+
+
+# let the fun begin!
+for seq in flashseqs:
+ print "Flashing", len(seq.data), "bytes at address", hex(seq.address)
+ pkernWRITE(seq.address, len(seq.data), seq.data)
+
+print "Reset your board now to run code from Flash"