printf("********************************************************\n");
}
+static void generel_td_fill(struct general_td *dest, usb_transfer_descriptor *src)
+{
+ (void) memcpy((void*) (phys_to_virt(ACCESS_LE(dest->cbp))), src->buffer, src->actlen);
+ dest->flags &= ACCESS_LE(~OHCI_TD_DIRECTION_PID_MASK);
+ switch(src->pid) {
+ case USB_PID_SETUP:
+ printf("pid_setup\n");
+ dest->flags |= ACCESS_LE(OHCI_TD_DIRECTION_PID_SETUP);
+ dest->flags |= ACCESS_LE(OHCI_TD_TOGGLE_0);
+ dest->flags |= ACCESS_LE(OHCI_TD_BUFFER_ROUNDING);
+ break;
+ case USB_PID_OUT:
+ printf("pid_out\n");
+ dest->flags |= ACCESS_LE(OHCI_TD_DIRECTION_PID_OUT);
+ dest->flags |= ACCESS_LE(OHCI_TD_BUFFER_ROUNDING);
+ /*
+ * TODO: just temporary solution!
+ * there can be also regular PID_OUT pakets
+ */
+ dest->flags |= ACCESS_LE(OHCI_TD_TOGGLE_1);
+ break;
+ case USB_PID_IN:
+ printf("pid_in\n");
+ dest->flags |= ACCESS_LE(OHCI_TD_DIRECTION_PID_IN);
+ dest->flags |= ACCESS_LE(OHCI_TD_BUFFER_ROUNDING);
+ /*
+ * let the endpoint do the togglestuff!
+ * TODO: just temporary solution!
+ * there can be also inregular PID_IN pakets (@Status Stage)
+ */
+ dest->flags |= ACCESS_LE(OHCI_TD_TOGGLE_CARRY);
+#if 0
+ /* should be done by HC!
+ * first pid_in start with DATA0 */
+ */
+ dummyconfig.headp = ACCESS_LE( src->togl ?
+ ACCESS_LE(dummyconfig.headp) | OHCI_ENDPOINT_TOGGLE_CARRY :
+ ACCESS_LE(dummyconfig.headp) & ~OHCI_ENDPOINT_TOGGLE_CARRY);
+#endif
+ break;
+ }
+ dest->flags |= ACCESS_LE(OHCI_TD_SET_DELAY_INTERRUPT(7));
+ sync_after_write(dest, sizeof(struct general_td));
+ sync_after_write((void*) phys_to_virt(ACCESS_LE(dest->cbp)), src->actlen);
+}
/**
* Enqueue a transfer descriptor.
write32(OHCI0_HC_CTRL_HEAD_ED, virt_to_phys(&dummyconfig));
} else {
sync_before_read(&dummyconfig, 16);
- dummyconfig.flags |= ACCESS_LE(OHCI_ENDPOINT_SKIP);
printf("HALTED set?: %d\n", ACCESS_LE(dummyconfig.headp)&OHCI_ENDPOINT_HALTED);
- sync_after_write(&dummyconfig, 16);
-
- udelay(2000);
dummyconfig.headp = ACCESS_LE(0);
sync_after_write(&dummyconfig, 16);
}
- sync_before_read(&hcca_oh0, 256);
- printf("done head (nach sync): 0x%08X\n", ACCESS_LE(hcca_oh0.done_head));
- printf("HCCA->frame_no: %d\nhcca->hccapad1: %d\n",
- ((ACCESS_LE(hcca_oh0.frame_no) & 0xffff)>>16),
- ACCESS_LE(hcca_oh0.frame_no)&0x0000ffff );
-
struct general_td *tmptd = allocate_general_td(td->actlen);
- (void) memcpy((void*) (phys_to_virt(ACCESS_LE(tmptd->cbp))), td->buffer, td->actlen);
-
- tmptd->flags &= ACCESS_LE(~OHCI_TD_DIRECTION_PID_MASK);
- switch(td->pid) {
- case USB_PID_SETUP:
- printf("pid_setup\n");
- tmptd->flags |= ACCESS_LE(OHCI_TD_DIRECTION_PID_SETUP);
- tmptd->flags |= ACCESS_LE(OHCI_TD_TOGGLE_0);
- tmptd->flags |= ACCESS_LE(OHCI_TD_BUFFER_ROUNDING);
- break;
- case USB_PID_OUT:
- printf("pid_out\n");
- tmptd->flags |= ACCESS_LE(OHCI_TD_DIRECTION_PID_OUT);
- tmptd->flags |= ACCESS_LE(OHCI_TD_BUFFER_ROUNDING);
-
- /*
- * TODO: just temporary solution!
- * there can be also regular PID_OUT pakets
- */
- tmptd->flags |= ACCESS_LE(OHCI_TD_TOGGLE_1);
- break;
- case USB_PID_IN:
- printf("pid_in\n");
- tmptd->flags |= ACCESS_LE(OHCI_TD_DIRECTION_PID_IN);
- tmptd->flags |= ACCESS_LE(OHCI_TD_BUFFER_ROUNDING);
- /*
- * let the endpoint do the togglestuff!
- * TODO: just temporary solution!
- * there can be also inregular PID_IN pakets (@Status Stage)
- */
- tmptd->flags |= ACCESS_LE(OHCI_TD_TOGGLE_CARRY);
-#if 0
- /* should be done by HC!
- * first pid_in start with DATA0 */
- */
- dummyconfig.headp = ACCESS_LE( td->togl ?
- ACCESS_LE(dummyconfig.headp) | OHCI_ENDPOINT_TOGGLE_CARRY :
- ACCESS_LE(dummyconfig.headp) & ~OHCI_ENDPOINT_TOGGLE_CARRY);
-#endif
- break;
- }
- tmptd->flags |= ACCESS_LE(OHCI_TD_SET_DELAY_INTERRUPT(7));
+ generel_td_fill(tmptd, td);
printf("tmptd hexdump (before) 0x%08X:\n", tmptd);
hexdump(tmptd, sizeof(struct general_td));
printf("tmptd->cbp hexdump (before) 0x%08X:\n", phys_to_virt(ACCESS_LE(tmptd->cbp)));
hexdump((void*) phys_to_virt(ACCESS_LE(tmptd->cbp)), td->actlen);
- sync_after_write(tmptd, sizeof(struct general_td));
- sync_after_write((void*) phys_to_virt(ACCESS_LE(tmptd->cbp)), td->actlen);
-
#define ED_MASK ((u32)~0x0f)
- dummyconfig.flags &= ACCESS_LE(~OHCI_ENDPOINT_SKIP);
dummyconfig.headp |= ACCESS_LE(virt_to_phys((void*) ((u32)tmptd & ED_MASK)));
printf("dummyconfig hexdump (before) 0x%08X:\n", &dummyconfig);
sync_after_write(&dummyconfig, 16);
- printf("OHCI_CTRL_CLE: 0x%08X || ", read32(OHCI0_HC_CONTROL)&OHCI_CTRL_CLE);
- printf("OHCI_CLF: 0x%08X\n", read32(OHCI0_HC_COMMAND_STATUS)&OHCI_CLF);
+ /* trigger control list */
set32(OHCI0_HC_CONTROL, OHCI_CTRL_CLE);
write32(OHCI0_HC_COMMAND_STATUS, OHCI_CLF);
- //printf("+++++++++++++++++++++++++++++\n");
- /* spin until the controller is done with the control list */
- //printf("current: 0x%08X\n", current);
-
//don't use this quirk stuff here!
#if 1
while(!read32(OHCI0_HC_CTRL_CURRENT_ED)) {
printf("dummyconfig hexdump (after) 0x%08X:\n", &dummyconfig);
hexdump((void*) &dummyconfig, 16);
- sync_before_read(&hcca_oh0, 256);
- printf("done head (nach sync): 0x%08X\n", ACCESS_LE(hcca_oh0.done_head));
-
- struct general_td* donetd = phys_to_virt(ACCESS_LE(hcca_oh0.done_head)&~1);
- sync_before_read(donetd, 16);
- printf("done head hexdump: 0x%08X\n", donetd);
- hexdump((void*) donetd, 16);
-
u32 newlen = 0;
if(td->actlen) {
- sync_before_read((void*) tmptdbuffer, td->actlen);
- newlen = (u32)phys_to_virt(ACCESS_LE(tmptd->cbp)) - tmptdbuffer;
- printf("WOOOOT newlen: %d\n", newlen);
- hexdump((void*) tmptdbuffer, newlen);
- printf("OLD length: %d\n", td->actlen);
+ printf("tmptdbuffer: %d\n", td->actlen);
hexdump((void*) tmptdbuffer, td->actlen);
}
printf("td->buffer: 0x%08X\np2v(A_L(tmptd->cbp: 0x%08X\ntd->actlen: %d\n", (void*) (td->buffer), phys_to_virt(ACCESS_LE(tmptd->cbp)), td->actlen);
(void) memcpy((void*) (td->buffer), (void*) tmptdbuffer, td->actlen);
+ /* disable control list */
write32(OHCI0_HC_CONTROL, read32(OHCI0_HC_CONTROL)&~OHCI_CTRL_CLE);
/*