add debugfunction for td->flag

finally we get some response from HC :) however our TDs seems to be
bullshit :/

@commit 8dbf7ef007d1d:
I think the problem here was that tailp and headp of the ED structure
was set to the same location. In this case, the HC thinks all TDs are
done! So HC set CLF to null. (search for this somewhere in the ohci specs...)
In fact, just headp must be set.

diff --git a/usb/host/ohci.c b/usb/host/ohci.c
index 53570930b137c5e9a335f27315dd6d5e7f649f8c..6ab3cd97e8a3e47077ed94e878a5cf65213f3822 100644 (file)
--- a/usb/host/ohci.c
+++ b/usb/host/ohci.c
@@ -149,13 +149,25 @@ static void dbg_op_state()
        }
 }
 
+static void dbg_td_flag(u32 flag)
+{
+       printf("**************** dbg_td_flag: 0x%08X ***************\n", flag);
+       printf("CC: %X\tshould be 0, see page 32 (ohci spec)\n", (flag>>28)&0xf);
+       printf("EC: %X\tsee page 20 (ohci spec)\n", (flag>>26)&3);
+       printf(" T: %X\n", (flag>>24)&3);
+       printf("DI: %X\n", (flag>>21)&7);
+       printf("DP: %X\n", (flag>>19)&3);
+       printf(" R: %X\n", (flag>>18)&1);
+       printf("********************************************************\n");
+}
+
+
 
 /**
  * Enqueue a transfer descriptor.
  */
-u8 first = 0;
 u8 hcdi_enqueue(usb_transfer_descriptor *td) {
-       control_quirk();
+       control_quirk(); //required?
 
        printf( "===========================\n"
                        "===========================\n");
@@ -221,11 +233,8 @@ u8 hcdi_enqueue(usb_transfer_descriptor *td) {
        u32 current = read32(OHCI0_HC_CTRL_CURRENT_ED);
        printf("current: 0x%08X\n", current);
        while(!current) {
-       //      udelay(1000000);
                udelay(2);
                current = read32(OHCI0_HC_CTRL_CURRENT_ED);
-       //      printf("OHCI_CTRL_CLE: 0x%08X || ", read32(OHCI0_HC_CONTROL)&OHCI_CTRL_CLE);
-       //      printf("OHCI_CLF: 0x%08X\n", read32(OHCI0_HC_COMMAND_STATUS)&OHCI_CLF);
        }
 
        udelay(20000);
@@ -238,6 +247,7 @@ u8 hcdi_enqueue(usb_transfer_descriptor *td) {
        sync_before_read(tmptd, sizeof(struct general_td));
        printf("tmptd hexdump (after) 0x%08X:\n", tmptd);
        hexdump(tmptd, sizeof(struct general_td));
+       dbg_td_flag(ACCESS_LE(tmptd->flags));
 
        sync_before_read((void*) phys_to_virt(ACCESS_LE(tmptd->cbp)), td->actlen);
        printf("tmptd->cbp hexdump (after) 0x%08X:\n", phys_to_virt(ACCESS_LE(tmptd->cbp)));
@@ -381,7 +391,17 @@ void hcdi_irq()
        /* WritebackDoneHead */
        if (flags & OHCI_INTR_WDH) {
                printf("WritebackDoneHead\n");
-               /* TODO: figure out what the linux kernel does here... */
+               /* basically the linux irq handler reverse TDs to their urbs
+                * and set done_head to null.
+                * since we are polling atm, just should do the latter task.
+                * however, this won't work for now (i don't know why...)
+                * TODO!
+                */
+#if 0
+               sync_before_read(&hcca_oh0, 256);
+               hcca_oh0.done_head = 0;
+               sync_after_write(&hcca_oh0, 256);
+#endif
        }
 
        /* TODO: handle any pending URB/ED unlinks... */