Merge pull request #5714 from alexischr/update_bockbuild

[mono.git] / man / mono.1

.\" 
.\" mono manual page.
.\" Copyright 2003 Ximian, Inc. 
.\" Copyright 2004-2011 Novell, Inc. 
.\" Copyright 2011-2012 Xamarin Inc
.\" Copyright 2013 7digital Media Ltd.
.\" Author:
.\"   Miguel de Icaza (miguel@gnu.org)
.\"
.TH Mono "mono"
.SH NAME
mono \- Mono's ECMA-CLI native code generator (Just-in-Time and Ahead-of-Time)
.SH SYNOPSIS
.PP
.B mono [options] file [arguments...]
.PP
.B mono-sgen [options] file [arguments...]
.SH DESCRIPTION
\fImono\fP is a runtime implementation of the ECMA Common Language
Infrastructure.  This can be used to run ECMA and .NET applications.
.PP
The runtime loads the specified
.I file
and optionally passes
the
.I arguments
to it.  The 
.I file
is an ECMA assembly.  They typically have a .exe or .dll extension.
.PP
These executables can reference additionaly functionality in the form
of assembly references.  By default those assembly references are
resolved as follows: the \fBmscorlib.dll\fR is resolved from the
system profile that is configured by Mono, and other assemblies are
loaded from the Global Assembly Cache (GAC).   
.PP
The runtime contains a native code generator that transforms the
Common Intermediate Language into native code.
.PP
The code generator can operate in two modes: just in time compilation
(JIT) or ahead of time compilation (AOT).  Since code can be
dynamically loaded, the runtime environment and the JIT are always
present, even if code is compiled ahead of time.
.PP
The runtime provides a number of configuration options for running
applications, for developing and debugging, and for testing and
debugging the runtime itself.
.PP
The \fImono\fP command uses the moving and generational SGen garbage collector
while the \fImono-boehm\fP command uses the conservative Boehm
garbage collector.
.SH PORTABILITY
On Unix-based systems, Mono provides a mechanism to emulate the 
Windows-style file access, this includes providing a case insensitive
view of the file system, directory separator mapping (from \\ to /) and
stripping the drive letters.
.PP
This functionality is enabled by setting the 
.B MONO_IOMAP 
environment variable to one of 
.B all, drive
and 
.B case.
.PP
See the description for 
.B MONO_IOMAP
in the environment variables section for more details.
.SH RUNTIME OPTIONS
The following options are available:
.TP
\fB--aot\fR, \fB--aot[=options]\fR
This option is used to precompile the CIL code in the specified
assembly to native code.  The generated code is stored in a file with
the extension .so.  This file will be automatically picked up by the
runtime when the assembly is executed.  
.Sp 
Ahead-of-Time compilation is most useful if you use it in combination
with the -O=all,-shared flag which enables all of the optimizations in
the code generator to be performed.  Some of those optimizations are
not practical for Just-in-Time compilation since they might be very
time consuming.
.Sp
Unlike the .NET Framework, Ahead-of-Time compilation will not generate
domain independent code: it generates the same code that the
Just-in-Time compiler would produce.   Since most applications use a
single domain, this is fine.   If you want to optimize the generated
code for use in multi-domain applications, consider using the
-O=shared flag.
.Sp
This pre-compiles the methods, but the original assembly is still
required to execute as this one contains the metadata and exception
information which is not available on the generated file.  When
precompiling code, you might want to compile with all optimizations
(-O=all).  Pre-compiled code is position independent code.
.Sp
Precompilation is just a mechanism to reduce startup time, increase
code sharing across multiple mono processes and avoid just-in-time
compilation program startup costs.  The original assembly must still
be present, as the metadata is contained there.
.Sp
AOT code typically can not be moved from one computer to another
(CPU-specific optimizations that are detected at runtime) so you
should not try to move the pre-generated assemblies or package the
pre-generated assemblies for deployment.    
.Sp
A few options are available as a parameter to the 
.B --aot 
command line option.   The options are separated by commas, and more
than one can be specified:
.RS
.ne 8
.TP
.I asmonly
Instructs the AOT compiler to output assembly code instead of an
object file.
.TP
.I bind-to-runtime-version
.Sp
If specified, forces the generated AOT files to be bound to the
runtime version of the compiling Mono.   This will prevent the AOT
files from being consumed by a different Mono runtime.
.TP
.I data-outfile=FILE.dll.aotdata
.Sp
This instructs the AOT code generator to output certain data
constructs into a separate file.   This can reduce the executable
images some five to twenty percent.   Developers need to then ship the
resulting aotdata as a resource and register a hook to load the data
on demand by using the 
.I mono_install_load_aot_data_hook
method.
.TP
.I direct-icalls
.Sp
When this option is specified, icalls (internal calls made from the
standard library into the mono runtime code) are invoked directly
instead of going through the operating system symbol lookup operation.
This requires use of the
.I static
option.
.TP
.I direct-pinvoke
.Sp
When this option is specified, P/Invoke methods are invoked directly
instead of going through the operating system symbol lookup operation.
This requires use of the
.I static
option.
.TP
.I dwarfdebug
Instructs the AOT compiler to emit DWARF debugging information. When
used together with the nodebug option, only DWARF debugging
information is emitted, but not the information that can be used at
runtime.
.TP
.I full
.Sp
This creates binaries which can be used with the --full-aot option.
.TP
.I hybrid
.Sp
This creates binaries which can be used with the --hybrid-aot option.
.TP
.I llvm
AOT will be performed with the LLVM backend instead of the Mono backend where possible. This will be slower to compile but most likely result in a performance improvement.
.TP
.I llvmonly
AOT will be performed with the LLVM backend exclusively and the Mono backend will not be used. The only output in this mode will be the bitcode file normally specified with the
.I llvm-outfile
option. Use of
.I llvmonly
automatically enables the
.I full
and
.I llvm
options. This feature is experimental.
.TP
.I llvm-outfile=[filename]
Gives the path for the temporary LLVM bitcode file created during AOT.
.TP
.I info
Print the architecture the AOT in this copy of Mono targets and quit.
.TP
.I interp
Generates all required wrappers, so that it is possible to run --interpreter without
any code generation at runtime.  This option only makes sense with \fBmscorlib.dll\fR.
Embedders can set

.nf
mono_jit_set_aot_mode (MONO_AOT_MODE_INTERP);
.fi
.ne
.TP
.I ld-flags
Additional flags to pass to the C linker (if the current AOT mode calls for invoking it).
.TP
.I llvm-path=<PREFIX>
Same for the llvm tools 'opt' and 'llc'.
.TP
.I msym-dir=<PATH>
Instructs the AOT compiler to generate offline sequence points .msym files.
The generated .msym files will be stored into a subfolder of <PATH> named as the
compilation AOTID.
.TP
.I mtriple=<TRIPLE>
Use the GNU style target triple <TRIPLE> to determine some code generation options, i.e.
--mtriple=armv7-linux-gnueabi will generate code that targets ARMv7. This is currently
only supported by the ARM backend. In LLVM mode, this triple is passed on to the LLVM
llc compiler.
.TP
.I nimt-trampolines=[number]
When compiling in full aot mode, the IMT trampolines must be precreated
in the AOT image.  You can add additional method trampolines with this argument.
Defaults to 512.
.TP
.I ngsharedvt-trampolines=[number]
When compiling in full aot mode, the value type generic sharing trampolines must be precreated
in the AOT image.  You can add additional method trampolines with this argument.
Defaults to 512.
.TP
.I nodebug
Instructs the AOT compiler to not output any debugging information.
.TP
.I no-direct-calls
This prevents the AOT compiler from generating a direct calls to a
method.   The AOT compiler usually generates direct calls for certain
methods that do not require going through the PLT (for example,
methods that are known to not require a hook like a static
constructor) or call into simple internal calls.
.TP
.I nrgctx-trampolines=[number]
When compiling in full aot mode, the generic sharing trampolines must be precreated
in the AOT image.  You can add additional method trampolines with this argument.
Defaults to 4096.
.TP
.I nrgctx-fetch-trampolines=[number]
When compiling in full aot mode, the generic sharing fetch trampolines must be precreated
in the AOT image.  You can add additional method trampolines with this argument.
Defaults to 128.
.TP
.I ntrampolines=[number]
When compiling in full aot mode, the method trampolines must be precreated
in the AOT image.  You can add additional method trampolines with this argument.
Defaults to 4096.
.TP
.I outfile=[filename]
Instructs the AOT compiler to save the output to the specified file.
.TP
.I print-skipped-methods
If the AOT compiler cannot compile a method for any reason, enabling this flag
will output the skipped methods to the console.
.TP
.I profile=[file]
Specify a file to use for profile-guided optimization. See the "AOT PROFILING" section. To specify multiple files, include the
.I profile
option multiple times.
.TP
.I profile-only
AOT *only* the methods described in the files specified with the
.I profile
option. See the "AOT PROFILING" section.
.TP
.I readonly-value=namespace.typename.fieldname=type/value
Override the value of a static readonly field. Usually, during JIT
compilation, the static constructor is ran eagerly, so the value of
a static readonly field is known at compilation time and the compiler
can do a number of optimizations based on it. During AOT, instead, the static
constructor can't be ran, so this option can be used to set the value of such
a field and enable the same set of optimizations.
Type can be any of i1, i2, i4 for integers of the respective sizes (in bytes).
Note that signed/unsigned numbers do not matter here, just the storage size.
This option can be specified multiple times and it doesn't prevent the static
constructor for the type defining the field to execute with the usual rules
at runtime (hence possibly computing a different value for the field).
.TP
.I save-temps,keep-temps
Instructs the AOT compiler to keep temporary files.
.TP
.I soft-debug
This instructs the compiler to generate sequence point checks that
allow Mono's soft debugger to debug applications even on systems where
it is not possible to set breakpoints or to single step (certain
hardware configurations like the cell phones and video gaming
consoles). 
.TP
.I static
Create an ELF object file (.o) or .s file which can be statically linked into an
executable when embedding the mono runtime. When this option is used, the object file
needs to be registered with the embedded runtime using the mono_aot_register_module
function which takes as its argument the mono_aot_module_<ASSEMBLY NAME>_info global
symbol from the object file:

.nf
extern void *mono_aot_module_hello_info;

mono_aot_register_module (mono_aot_module_hello_info);
.fi
.ne
.TP
.I stats
Print various stats collected during AOT compilation.
.TP
.I temp-path=[path]
Explicitly specify path to store temporary files created during AOT compilation.
.TP
.I threads=[number]
This is an experimental option for the AOT compiler to use multiple threads
when compiling the methods.
.TP
.I tool-prefix=<PREFIX>
Prepends <PREFIX> to the name of tools ran by the AOT compiler, i.e. 'as'/'ld'. For
example, --tool=prefix=arm-linux-gnueabi- will make the AOT compiler run
'arm-linux-gnueabi-as' instead of 'as'.
.TP
.I verbose
Prints additional information about type loading failures.
.TP
.I write-symbols,no-write-symbols
Instructs the AOT compiler to emit (or not emit) debug symbol information.
.PP
For more information about AOT, see: http://www.mono-project.com/docs/advanced/aot/
.RE
.TP
\fB--aot-path=PATH\fR
List of additional directories to search for AOT images.
.TP
\fB--apply-bindings=FILE\fR
Apply the assembly bindings from the specified configuration file when running
the AOT compiler.  This is useful when compiling an auxiliary assembly that is
referenced by a main assembly that provides a configuration file.  For example,
if app.exe uses lib.dll then in order to make the assembly bindings from
app.exe.config available when compiling lib.dll ahead of time, use:
.nf
        mono --apply-bindings=app.exe.config --aot lib.dll
.fi
.TP
\fB--assembly-loader=MODE\fR
If mode is \fBstrict\fR, Mono will check that the public key token, culture and version
of a candidate assembly matches the requested strong name.  If mode is \fBlegacy\fR, as
long as the name matches, the candidate will be allowed. \fBstrict\fR is the behavior
consistent with .NET Framework but may break some existing mono-based applications.
The default is \fBlegacy\fR.
.TP
\fB--attach=[options]\fR
Currently the only option supported by this command line argument is
\fBdisable\fR which disables the attach functionality.
.TP
\fB--config filename\fR
Load the specified configuration file instead of the default one(s).
The default files are /etc/mono/config and ~/.mono/config or the file
specified in the MONO_CONFIG environment variable, if set.  See the
mono-config(5) man page for details on the format of this file.
.TP
\fB--debugger-agent=[options]\fR 
This instructs the Mono runtime to
start a debugging agent inside the Mono runtime and connect it to a
client user interface will control the Mono process.
This option is typically used by IDEs, like the MonoDevelop or Visual Studio IDEs.
.RS
The configuration is specified using one of more of the following options:
.RS
.ne 8
.TP
.I address=host:port
.Sp
Use this option to specify the IP address where your debugger client is
listening to.
.TP
.I loglevel=LEVEL
.Sp
Specifies the diagnostics log level for 
.TP
.I logfile=filename
.Sp
Used to specify the file where the log will be stored, it defaults to
standard output.
.TP
.I server=[y/n]
Defaults to no, with the default option Mono will actively connect to the
host/port configured with the \fBaddress\fR option.  If you set it to 'y', it 
instructs the Mono runtime to start debugging in server mode, where Mono
actively waits for the debugger front end to connect to the Mono process.  
Mono will print out to stdout the IP address and port where it is listening.
.TP
.I setpgid=[y/n]
If set to yes, Mono will call \fBsetpgid(0, 0)\fR on startup, if that function
is available on the system. This is useful for ensuring that signals delivered
to a process that is executing the debuggee are not propagated to the debuggee,
e.g. when Ctrl-C sends \fBSIGINT\fR to the \fBsdb\fR tool.
.TP
.I suspend=[y/n]
Defaults to yes, with the default option Mono will suspend the vm on startup 
until it connects successfully to a debugger front end.  If you set it to 'n', in 
conjunction with \fBserver=y\fR, it instructs the Mono runtime to run as normal, 
while caching metadata to send to the debugger front end on connection..
.TP
.I transport=transport_name
.Sp
This is used to specify the transport that the debugger will use to
communicate.   It must be specified and currently requires this to
be 'dt_socket'. 
.ne
.RE
.TP
\fB--desktop\fR
Configures the virtual machine to be better suited for desktop
applications.  Currently this sets the GC system to avoid expanding
the heap as much as possible at the expense of slowing down garbage
collection a bit.
.TP
\fB--full-aot\fR
This flag instructs the Mono runtime to not
generate any code at runtime and depend exclusively on the code
generated from using mono --aot=full previously.  This is useful for
platforms that do not permit dynamic code generation, or if you need
to run assemblies that have been stripped of IL (for example using
mono-cil-strip).
.Sp
Notice that this feature will abort execution at runtime if a codepath
in your program, or Mono's class libraries attempts to generate code
dynamically.  You should test your software upfront and make sure that
you do not use any dynamic features.
.TP
\fB--gc=boehm\fR, \fB--gc=sgen\fR
Selects the Garbage Collector engine for Mono to use, Boehm or SGen.
Currently this merely ensures that you are running either the
\fImono\fR or \fImono-sgen\fR commands.    This flag can be set in the
\fBMONO_ENV_OPTIONS\fR environment variable to force all of your child
processes to use one particular kind of GC with the Mono runtime.
.TP
\fB--gc-debug=[options]\fR
Command line equivalent of the \fBMONO_GC_DEBUG\fR environment variable.
.TP
\fB--gc-params=[options]\fR
Command line equivalent of the \fBMONO_GC_PARAMS\fR environment variable.
.TP
\fB--arch=32\fR, \fB--arch=64\fR
(Mac OS X only): Selects the bitness of the Mono binary used, if
available. If the binary used is already for the selected bitness, nothing
changes. If not, the execution switches to a binary with the selected
bitness suffix installed side by side (for example, '/bin/mono --arch=64'
will switch to '/bin/mono64' iff '/bin/mono' is a 32-bit build).
.TP
\fB--help\fR, \fB-h\fR
Displays usage instructions.
.TP
\fB--hybrid-aot\fR
This flag allows the Mono runtime to run assemblies
that have been stripped of IL, for example using mono-cil-strip. For this to
work, the assembly must have been AOT compiled with --aot=hybrid.

This flag is similar to --full-aot, but it does not disable the JIT. This means
you can use dynamic features such as System.Reflection.Emit.
.TP
\fB--llvm\fR
If the Mono runtime has been compiled with LLVM support (not available
in all configurations), Mono will use the LLVM optimization and code
generation engine to JIT or AOT compile.     
.Sp
For more information, consult: http://www.mono-project.com/docs/advanced/mono-llvm/
.TP
\fB--nollvm\fR
When using a Mono that has been compiled with LLVM support, it forces
Mono to fallback to its JIT engine and not use the LLVM backend.
.TP
\fB--optimize=MODE\fR, \fB-O=MODE\fR
MODE is a comma separated list of optimizations.  They also allow
optimizations to be turned off by prefixing the optimization name with
a minus sign.
.Sp
In general, Mono has been tuned to use the default set of flags,
before using these flags for a deployment setting, you might want to
actually measure the benefits of using them.    
.Sp
The following optimization flags are implemented in the core engine:
.nf
             abcrem     Array bound checks removal
             all        Turn on all optimizations
             aot        Usage of Ahead Of Time compiled code
             branch     Branch optimizations
             cfold      Constant folding
             cmov       Conditional moves [arch-dependency]
             deadce     Dead code elimination
             consprop   Constant propagation
             copyprop   Copy propagation
             fcmov      Fast x86 FP compares [arch-dependency]
             float32    Perform 32-bit float arithmetic using 32-bit operations
             gshared    Enable generic code sharing.
             inline     Inline method calls
             intrins    Intrinsic method implementations
             linears    Linear scan global reg allocation
             leaf       Leaf procedures optimizations
             loop       Loop related optimizations
             peephole   Peephole postpass
             precomp    Precompile all methods before executing Main
             sched      Instruction scheduling
             shared     Emit per-domain code
             sse2       SSE2 instructions on x86 [arch-dependency]
             tailc      Tail recursion and tail calls
.fi
.Sp
For example, to enable all the optimization but dead code
elimination and inlining, you can use:
.nf
        -O=all,-deadce,-inline
.fi
.Sp
The flags that are flagged with [arch-dependency] indicate that the
given option if used in combination with Ahead of Time compilation
(--aot flag) would produce pre-compiled code that will depend on the
current CPU and might not be safely moved to another computer. 
.RS
.ne 8
.PP
The following optimizations are supported
.TP
.I float32
Requests that the runtime performn 32-bit floating point operations
using only 32-bits.   By default the Mono runtime tries to use the
highest precision available for floating point operations, but while
this might render better results, the code might run slower.   This
options also affects the code generated by the LLVM backend.
.TP
.I inline
Controls whether the runtime should attempt to inline (the default),
or not inline methods invocations
.ne
.RE
.TP
\fB--runtime=VERSION\fR
Mono supports different runtime versions. The version used depends on the program
that is being run or on its configuration file (named program.exe.config). This option
can be used to override such autodetection, by forcing a different runtime version
to be used. Note that this should only be used to select a later compatible runtime
version than the one the program was compiled against. A typical usage is for
running a 1.1 program on a 2.0 version:
.nf
         mono --runtime=v2.0.50727 program.exe
.fi
.TP
\fB--security\fR, \fB--security=mode\fR
Activate the security manager, a currently experimental feature in
Mono and it is OFF by default. The new code verifier can be enabled
with this option as well.
.RS
.ne 8
.PP
Using security without parameters is equivalent as calling it with the
"cas" parameter.  
.PP
The following modes are supported:
.TP 
.I core-clr
Enables the core-clr security system, typically used for
Moonlight/Silverlight applications.  It provides a much simpler
security system than CAS, see http://www.mono-project.com/docs/web/moonlight/
for more details and links to the descriptions of this new system. 
.TP
.I validil
Enables the new verifier and performs basic verification for code
validity.  In this mode, unsafe code and P/Invoke are allowed. This
mode provides a better safety guarantee but it is still possible
for managed code to crash Mono. 
.TP
.I verifiable
Enables the new verifier and performs full verification of the code
being executed.  It only allows verifiable code to be executed.
Unsafe code is not allowed but P/Invoke is.  This mode should
not allow managed code to crash mono.  The verification is not as
strict as ECMA 335 standard in order to stay compatible with the MS
runtime.
.PP
The security system acts on user code: code contained in mscorlib or
the global assembly cache is always trusted.
.ne
.RE
.TP
\fB--server\fR
Configures the virtual machine to be better suited for server
operations (currently, allows a heavier threadpool initialization).
.TP
\fB--verify-all\fR 
Verifies mscorlib and assemblies in the global
assembly cache for valid IL, and all user code for IL
verifiability. 

This is different from \fB--security\fR's verifiable
or validil in that these options only check user code and skip
mscorlib and assemblies located on the global assembly cache.
.TP
\fB-V\fR, \fB--version\fR
Prints JIT version information (system configuration, release number
and branch names if available). 


.SH DEVELOPMENT OPTIONS
The following options are used to help when developing a JITed application.
.TP
\fB--debug\fR, \fB--debug=OPTIONS\fR
Turns on the debugging mode in the runtime.  If an assembly was
compiled with debugging information, it will produce line number
information for stack traces. 
.RS
.ne 8
.PP
The optional OPTIONS argument is a comma separated list of debugging
options.  These options are turned off by default since they generate
much larger and slower code at runtime.
.TP
The following options are supported:
.TP
.I casts
Produces a detailed error when throwing a InvalidCastException.   This
option needs to be enabled as this generates more verbose code at
execution time. 
.TP
.I mdb-optimizations
Disable some JIT optimizations which are usually only disabled when
running inside the debugger.  This can be helpful if you want to attach
to the running process with mdb.
.TP
.I gdb
Generate and register debugging information with gdb. This is only supported on some
platforms, and only when using gdb 7.0 or later.
.ne
.RE
.TP
\fB--profile[=profiler[:profiler_args]]\fR
Turns on profiling.  For more information about profiling applications
and code coverage see the sections "PROFILING" and "CODE COVERAGE"
below. 
.Sp
This option can be used multiple times, each time will load an
additional profiler.   This allows developers to use modules that
extend the JIT through the Mono profiling interface.
.TP
\fB--trace[=expression]\fR
Shows method names as they are invoked.  By default all methods are
traced. 
.Sp
The trace can be customized to include or exclude methods, classes or
assemblies.  A trace expression is a comma separated list of targets,
each target can be prefixed with a minus sign to turn off a particular
target.  The words `program', `all' and `disabled' have special
meaning.  `program' refers to the main program being executed, and
`all' means all the method calls.
.Sp
The `disabled' option is used to start up with tracing disabled.  It
can be enabled at a later point in time in the program by sending the
SIGUSR2 signal to the runtime.
.Sp
Assemblies are specified by their name, for example, to trace all
calls in the System assembly, use:
.nf

        mono --trace=System app.exe

.fi
Classes are specified with the T: prefix.  For example, to trace all
calls to the System.String class, use:
.nf

        mono --trace=T:System.String app.exe

.fi
And individual methods are referenced with the M: prefix, and the
standard method notation:
.nf

        mono --trace=M:System.Console:WriteLine app.exe

.fi
Exceptions can also be traced, it will cause a stack trace to be
printed every time an exception of the specified type is thrown.
The exception type can be specified with or without the namespace,
and to trace all exceptions, specify 'all' as the type name.
.nf

        mono --trace=E:System.Exception app.exe

.fi
As previously noted, various rules can be specified at once:
.nf

        mono --trace=T:System.String,T:System.Random app.exe

.fi
You can exclude pieces, the next example traces calls to
System.String except for the System.String:Concat method.
.nf

        mono --trace=T:System.String,-M:System.String:Concat

.fi
You can trace managed to unmanaged transitions using
the wrapper qualifier:
.nf

        mono --trace=wrapper app.exe

.fi
Finally, namespaces can be specified using the N: prefix:
.nf

        mono --trace=N:System.Xml

.fi
.TP
\fB--no-x86-stack-align\fR
Don't align stack frames on the x86 architecture.  By default, Mono
aligns stack frames to 16 bytes on x86, so that local floating point
and SIMD variables can be properly aligned.  This option turns off the
alignment, which usually saves one instruction per call, but might
result in significantly lower floating point and SIMD performance.
.TP
\fB--jitmap\fR
Generate a JIT method map in a /tmp/perf-PID.map file. This file is then
used, for example, by the perf tool included in recent Linux kernels.
Each line in the file has:
.nf

        HEXADDR HEXSIZE methodname

.fi
Currently this option is only supported on Linux.
.SH JIT MAINTAINER OPTIONS
The maintainer options are only used by those developing the runtime
itself, and not typically of interest to runtime users or developers.
.TP
\fB--bisect=optimization:filename\fR
This flag is used by the automatic optimization bug bisector.  It
takes an optimization flag and a filename of a file containing a list
of full method names, one per line.  When it compiles one of the
methods in the file it will use the optimization given, in addition to
the optimizations that are otherwise enabled.  Note that if the
optimization is enabled by default, you should disable it with `-O`,
otherwise it will just apply to every method, whether it's in the file
or not.
.TP
\fB--break method\fR
Inserts a breakpoint before the method whose name is `method'
(namespace.class:methodname).  Use `Main' as method name to insert a
breakpoint on the application's main method.  You can use it also with
generics, for example "System.Collections.Generic.Queue`1:Peek"
.TP
\fB--breakonex\fR
Inserts a breakpoint on exceptions.  This allows you to debug your
application with a native debugger when an exception is thrown.
.TP
\fB--compile name\fR
This compiles a method (namespace.name:methodname), this is used for
testing the compiler performance or to examine the output of the code
generator. 
.TP
\fB--compileall\fR
Compiles all the methods in an assembly.  This is used to test the
compiler performance or to examine the output of the code generator
.TP 
\fB--graph=TYPE METHOD\fR
This generates a postscript file with a graph with the details about
the specified method (namespace.name:methodname).  This requires `dot'
and ghostview to be installed (it expects Ghostview to be called
"gv"). 
.Sp
The following graphs are available:
.nf
          cfg        Control Flow Graph (CFG)
          dtree      Dominator Tree
          code       CFG showing code
          ssa        CFG showing code after SSA translation
          optcode    CFG showing code after IR optimizations
.fi
.Sp
Some graphs will only be available if certain optimizations are turned
on.
.TP
\fB--ncompile\fR
Instruct the runtime on the number of times that the method specified
by --compile (or all the methods if --compileall is used) to be
compiled.  This is used for testing the code generator performance. 
.TP 
\fB--stats\fR
Displays information about the work done by the runtime during the
execution of an application. 
.TP
\fB--wapi=hps|semdel\fR
Perform maintenance of the process shared data.
.Sp
semdel will delete the global semaphore.
.Sp
hps will list the currently used handles.
.TP
\fB-v\fR, \fB--verbose\fR
Increases the verbosity level, each time it is listed, increases the
verbosity level to include more information (including, for example, 
a disassembly of the native code produced, code selector info etc.).
.SH ATTACH SUPPORT
The Mono runtime allows external processes to attach to a running
process and load assemblies into the running program.   To attach to
the process, a special protocol is implemented in the Mono.Management
assembly. 
.PP
With this support it is possible to load assemblies that have an entry
point (they are created with -target:exe or -target:winexe) to be
loaded and executed in the Mono process.
.PP
The code is loaded into the root domain, and it starts execution on
the special runtime attach thread.    The attached program should
create its own threads and return after invocation.
.PP
This support allows for example debugging applications by having the
csharp shell attach to running processes.
.SH PROFILING
The mono runtime includes a profiler that can be used to explore
various performance related problems in your application.  The
profiler is activated by passing the --profile command line argument
to the Mono runtime, the format is:
.nf

        --profile[=profiler[:profiler_args]]

.fi
Mono has a built-in profiler called 'default' (and is also the default
if no arguments are specified), but developers can write custom
profilers, see the section "CUSTOM PROFILERS" for more details.
.PP
If a 
.I profiler 
is not specified, the default profiler is used.
.Sp
The 
.I profiler_args 
is a profiler-specific string of options for the profiler itself.
.Sp
The default profiler accepts the following options 'alloc' to profile
memory consumption by the application; 'time' to profile the time
spent on each routine; 'jit' to collect time spent JIT-compiling methods
and 'stat' to perform sample statistical profiling.
If no options are provided the default is 'alloc,time,jit'. 
.PP
By default the
profile data is printed to stdout: to change this, use the 'file=filename'
option to output the data to filename.
.Sp
For example:
.nf

        mono --profile program.exe

.fi
.Sp
That will run the program with the default profiler and will do time
and allocation profiling.
.Sp
.nf

        mono --profile=default:stat,alloc,file=prof.out program.exe

.fi
Will do  sample statistical profiling and allocation profiling on
program.exe. The profile data is put in prof.out.
.Sp
Note that the statistical profiler has a very low overhead and should
be the preferred profiler to use (for better output use the full path
to the mono binary when running and make sure you have installed the
addr2line utility that comes from the binutils package).
.SH LOG PROFILER
This is the most advanced profiler.   
.PP
The Mono \f[I]log\f[] profiler can be used to collect a lot of
information about a program running in the Mono runtime.
This data can be used (both while the process is running and later)
to do analyses of the program behaviour, determine resource usage,
performance issues or even look for particular execution patterns.
.PP
This is accomplished by logging the events provided by the Mono
runtime through the profiling interface and periodically writing
them to a file which can be later inspected with the mprof-report(1)
tool. 
.PP
More information about how to use the log profiler is available on the
mprof-report(1) page. 
.SH CUSTOM PROFILERS
Mono provides a mechanism for loading other profiling modules which in
the form of shared libraries.  These profiling modules can hook up to
various parts of the Mono runtime to gather information about the code
being executed.
.PP
To use a third party profiler you must pass the name of the profiler
to Mono, like this:
.nf

        mono --profile=custom program.exe

.fi
.PP
In the above sample Mono will load the user defined profiler from the
shared library `mono-profiler-custom.so'.  This profiler module must
be on your dynamic linker library path.
.PP 
A list of other third party profilers is available from Mono's web
site (www.mono-project.com/docs/advanced/performance-tips/)
.PP
Custom profiles are written as shared libraries.  The shared library
must be called `mono-profiler-NAME.so' where `NAME' is the name of
your profiler.
.PP
For a sample of how to write your own custom profiler look in the
Mono source tree for in the samples/profiler.c.
.SH CODE COVERAGE
Mono ships with a code coverage module in the \f[I]coverage\f[] profiler.
To enable it, pass \fB--profile=coverage\fR to your mono invocation. It
will by default output a coverage.xml in the current directory. Use
\fBmono --profile=coverage:help sample.exe\fR for more information on the
different options.
.SH AOT PROFILING
You can improve startup performance by using the AOT profiler.
.PP
Typically the AOT compiler (\fBmono --aot\fR) will not generate code
for generic instantiations.   To solve this, you can run Mono with the
AOT profiler to find out all the generic instantiations that are used,
and then instructing the AOT compiler to produce code for these.
.PP
This command will run the specified app.exe and produce the
\fBout.aotprof\fR file with the data describing the generic
instantiations that are needed:
.nf
        $ mono --profile=aot:output=out.aotprof app.exe
.fi
.PP
Once you have this data, you can pass this to Mono's AOT compiler to
instruct it to generate code for it:
.nf
        $ mono --aot=profile=out.aotprof
.fi
.SH DEBUGGING AIDS
To debug managed applications, you can use the 
.B mdb
command, a command line debugger.  
.PP
It is possible to obtain a stack trace of all the active threads in
Mono by sending the QUIT signal to Mono, you can do this from the
command line, like this:
.nf

        kill -QUIT pid

.fi
Where pid is the Process ID of the Mono process you want to examine.
The process will continue running afterwards, but its state is not
guaranteed.
.PP
.B Important:
this is a last-resort mechanism for debugging applications and should
not be used to monitor or probe a production application.  The
integrity of the runtime after sending this signal is not guaranteed
and the application might crash or terminate at any given point
afterwards.   
.PP
The \fB--debug=casts\fR option can be used to get more detailed
information for Invalid Cast operations, it will provide information
about the types involved.   
.PP
You can use the MONO_LOG_LEVEL and MONO_LOG_MASK environment variables
to get verbose debugging output about the execution of your
application within Mono.
.PP
The 
.I MONO_LOG_LEVEL
environment variable if set, the logging level is changed to the set
value. Possible values are "error", "critical", "warning", "message",
"info", "debug". The default value is "error". Messages with a logging
level greater then or equal to the log level will be printed to
stdout/stderr.
.PP
Use "info" to track the dynamic loading of assemblies.
.PP
.PP
Use the 
.I MONO_LOG_MASK
environment variable to limit the extent of the messages you get: 
If set, the log mask is changed to the set value. Possible values are
"asm" (assembly loader), "type", "dll" (native library loader), "gc"
(garbage collector), "cfg" (config file loader), "aot" (precompiler),
"security" (e.g. Moonlight CoreCLR support), "threadpool" (thread pool generic), 
"io-threadpool" (thread pool I/O), "io-layer" (I/O layer - sockets, handles, shared memory etc) 
and "all". 
The default value is "all". Changing the mask value allows you to display only 
messages for a certain component. You can use multiple masks by comma 
separating them. For example to see config file messages and assembly loader
messages set you mask to "asm,cfg".
.PP
The following is a common use to track down problems with P/Invoke:
.nf

        $ MONO_LOG_LEVEL="debug" MONO_LOG_MASK="dll" mono glue.exe

.fi
.PP
.SH DEBUGGING WITH LLDB
If you are using LLDB, you can use the 
.B mono.py
script to print some internal data structures with it.   To use this,
add this to your 
.B  $HOME/.lldbinit
file:
.nf
command script import $PREFIX/lib/mono/lldb/mono.py
.fi
.PP
Where $PREFIX is the prefix value that you used when you configured
Mono (typically /usr).
.PP
Once this is done, then you can inspect some Mono Runtime data structures,
for example:
.nf
(lldb) p method

(MonoMethod *) $0 = 0x05026ac0 [mscorlib]System.OutOfMemoryException:.ctor()
.fi
.SH SERIALIZATION
Mono's XML serialization engine by default will use a reflection-based
approach to serialize which might be slow for continuous processing
(web service applications).  The serialization engine will determine
when a class must use a hand-tuned serializer based on a few
parameters and if needed it will produce a customized C# serializer
for your types at runtime.  This customized serializer then gets
dynamically loaded into your application.
.PP
You can control this with the MONO_XMLSERIALIZER_THS environment
variable.
.PP
The possible values are 
.B `no' 
to disable the use of a C# customized
serializer, or an integer that is the minimum number of uses before
the runtime will produce a custom serializer (0 will produce a
custom serializer on the first access, 50 will produce a serializer on
the 50th use). Mono will fallback to an interpreted serializer if the
serializer generation somehow fails. This behavior can be disabled
by setting the option
.B `nofallback'
(for example: MONO_XMLSERIALIZER_THS=0,nofallback).
.SH ENVIRONMENT VARIABLES
.TP
\fBGC_DONT_GC\fR
Turns off the garbage collection in Mono.  This should be only used
for debugging purposes
.TP
\fBHTTP_PROXY\fR
(Also \fBhttp_proxy\fR) If set, web requests using the Mono
Class Library will be automatically proxied through the given URL.
Not supported on Windows, Mac OS, iOS or Android. See also \fBNO_PROXY\fR.
.TP
\fBLLVM_COUNT\fR
When Mono is compiled with LLVM support, this instructs the runtime to
stop using LLVM after the specified number of methods are JITed.
This is a tool used in diagnostics to help isolate problems in the
code generation backend.   For example \fBLLVM_COUNT=10\fR would only
compile 10 methods with LLVM and then switch to the Mono JIT engine.
\fBLLVM_COUNT=0\fR would disable the LLVM engine altogether.
.TP
\fBMONO_ASPNET_INHIBIT_SETTINGSMAP\fR
Mono contains a feature which allows modifying settings in the .config files shipped
with Mono by using config section mappers. The mappers and the mapping rules are
defined in the $prefix/etc/mono/2.0/settings.map file and, optionally, in the
settings.map file found in the top-level directory of your ASP.NET application.
Both files are read by System.Web on application startup, if they are found at the
above locations. If you don't want the mapping to be performed you can set this
variable in your environment before starting the application and no action will
be taken.
.TP
\fBMONO_ASPNET_WEBCONFIG_CACHESIZE\fR
Mono has a cache of ConfigSection objects for speeding up WebConfigurationManager
queries. Its default size is 100 items, and when more items are needed, cache
evictions start happening. If evictions are too frequent this could impose
unnecessary overhead, which could be avoided by using this environment variable
to set up a higher cache size (or to lower memory requirements by decreasing it).
.TP
\fBMONO_CAIRO_DEBUG_DISPOSE\fR
If set, causes Mono.Cairo to collect stack traces when objects are allocated,
so that the finalization/Dispose warnings include information about the
instance's origin.
.TP
\fBMONO_CFG_DIR\fR
If set, this variable overrides the default system configuration directory
($PREFIX/etc). It's used to locate machine.config file.
.TP
\fBMONO_COM\fR
Sets the style of COM interop.  If the value of this variable is "MS"
Mono will use string marhsalling routines from the liboleaut32 for the
BSTR type library, any other values will use the mono-builtin BSTR
string marshalling.
.TP
\fBMONO_CONFIG\fR
If set, this variable overrides the default runtime configuration file
($PREFIX/etc/mono/config). The --config command line options overrides the
environment variable.
.TP
\fBMONO_CPU_ARCH\fR
Override the automatic cpu detection mechanism. Currently used only on arm.
The format of the value is as follows:
.nf

        "armvV [thumb[2]]"

.fi
where V is the architecture number 4, 5, 6, 7 and the options can be currently be
"thumb" or "thumb2". Example:
.nf

        MONO_CPU_ARCH="armv4 thumb" mono ...

.fi
.TP
\fBMONO_ARM_FORCE_SOFT_FLOAT\fR
When Mono is built with a soft float fallback on ARM and this variable is set to
"1", Mono will always emit soft float code, even if a VFP unit is
detected.
.TP
\fBMONO_DARWIN_WATCHER_MAXFDS\fR
This is a debugging aid used to force limits on the FileSystemWatcher
implementation in Darwin.   There is no limit by default.
.TP
\fBMONO_DISABLE_AIO\fR
If set, tells mono NOT to attempt using native asynchronous I/O services. In
that case, a default select/poll implementation is used. Currently only epoll()
is supported.
.TP
\fBMONO_DISABLE_MANAGED_COLLATION\fR
If this environment variable is `yes', the runtime uses unmanaged
collation (which actually means no culture-sensitive collation). It
internally disables managed collation functionality invoked via the
members of System.Globalization.CompareInfo class. Collation is
enabled by default.
.TP
\fBMONO_DISABLE_SHM\fR
Unix only: If set, disables the shared memory files used for
cross-process handles: process have only private handles.  This means
that process and thread handles are not available to other processes,
and named mutexes, named events and named semaphores are not visible
between processes.
.Sp
This is can also be enabled by default by passing the
"--disable-shared-handles" option to configure.
.Sp
This is the default from mono 2.8 onwards.
.TP
\fBMONO_DISABLE_SHARED_AREA\fR
Unix only: If set, disable usage of shared memory for exposing
performance counters. This means it will not be possible to both
externally read performance counters from this processes or read
those of external processes.
.TP
\fBMONO_DNS\fR
When set, enables the use of a fully managed DNS resolver instead of the
regular libc functions. This resolver performs much better when multiple
queries are run in parallel.

Note that /etc/nsswitch.conf will be ignored.
.TP
\fBMONO_EGD_SOCKET\fR
For platforms that do not otherwise have a way of obtaining random bytes
this can be set to the name of a file system socket on which an egd or
prngd daemon is listening.
.TP
\fBMONO_ENABLE_COOP\fR
This makes the Mono runtime and the SGen garbage collector run in cooperative
mode as opposed to run on preemptive mode.   Preemptive mode is the mode
that Mono has used historically, going back to the Boehm days, where the
garbage collector would run at any point and suspend execution of all 
threads as required to perform a garbage collection.  The cooperative mode
on the other hand requires the cooperation of all threads to stop at a 
safe point.   This makes for an easier to debug garbage collector.   As
of Mono 4.3.0 it is a work in progress, and while it works, it has not
been used extensively.   This option enabled the feature and allows us to
find spots that need to be tuned for this mode of operation.   Alternatively,
this mode can be enabled at compile time by using the --with-cooperative-gc
flag when calling configure.
.TP
\fBMONO_ENV_OPTIONS\fR
This environment variable allows you to pass command line arguments to
a Mono process through the environment.   This is useful for example
to force all of your Mono processes to use LLVM or SGEN without having
to modify any launch scripts.
.TP
\fBMONO_SDB_ENV_OPTIONS\fR
Used to pass extra options to the debugger agent in the runtime, as they were passed
using --debugger-agent=.
.TP
\fBMONO_EVENTLOG_TYPE\fR
Sets the type of event log provider to use (for System.Diagnostics.EventLog).
.Sp
Possible values are:
.RS
.TP
.I "local[:path]"
.Sp
Persists event logs and entries to the local file system.
.Sp
The directory in which to persist the event logs, event sources and entries
can be specified as part of the value.
.Sp
If the path is not explicitly set, it defaults to "/var/lib/mono/eventlog"
on unix and "%APPDATA%\mono\eventlog" on Windows.
.TP
.I "win32"
.Sp
.B 
Uses the native win32 API to write events and registers event logs and
event sources in the registry.   This is only available on Windows. 
.Sp
On Unix, the directory permission for individual event log and event source
directories is set to 777 (with +t bit) allowing everyone to read and write
event log entries while only allowing entries to be deleted by the user(s)
that created them.
.TP
.I "null"
.Sp
Silently discards any events.
.ne
.PP
The default is "null" on Unix (and versions of Windows before NT), and 
"win32" on Windows NT (and higher).
.RE
.TP
\fBMONO_EXTERNAL_ENCODINGS\fR
If set, contains a colon-separated list of text encodings to try when
turning externally-generated text (e.g. command-line arguments or
filenames) into Unicode.  The encoding names come from the list
provided by iconv, and the special case "default_locale" which refers
to the current locale's default encoding.
.IP
When reading externally-generated text strings UTF-8 is tried first,
and then this list is tried in order with the first successful
conversion ending the search.  When writing external text (e.g. new
filenames or arguments to new processes) the first item in this list
is used, or UTF-8 if the environment variable is not set.
.IP
The problem with using MONO_EXTERNAL_ENCODINGS to process your
files is that it results in a problem: although its possible to get
the right file name it is not necessarily possible to open the file.
In general if you have problems with encodings in your filenames you
should use the "convmv" program.
.TP
\fBMONO_GC_PARAMS\fR
When using Mono with the SGen garbage collector this variable controls
several parameters of the collector.  The variable's value is a comma
separated list of words.
.RS
.ne 8
.TP
\fBmax-heap-size=\fIsize\fR
Sets the maximum size of the heap. The size is specified in bytes and must
be a power of two. The suffixes `k', `m' and `g' can be used to
specify kilo-, mega- and gigabytes, respectively. The limit is the sum
of the nursery, major heap and large object heap. Once the limit is reached
the application will receive OutOfMemoryExceptions when trying to allocate.
Not the full extent of memory set in max-heap-size could be available to
satisfy a single allocation due to internal fragmentation. By default heap
limits is disabled and the GC will try to use all available memory.
.TP
\fBnursery-size=\fIsize\fR
Sets the size of the nursery.  The size is specified in bytes and must
be a power of two.  The suffixes `k', `m' and `g' can be used to
specify kilo-, mega- and gigabytes, respectively.  The nursery is the
first generation (of two).  A larger nursery will usually speed up the
program but will obviously use more memory.  The default nursery size
4 MB.
.TP
\fBmajor=\fIcollector\fR
Specifies which major collector to use.
Options are `marksweep' for the Mark&Sweep collector, `marksweep-conc'
for concurrent Mark&Sweep and `marksweep-conc-par' for parallel and
concurrent Mark&Sweep.  The concurrent Mark&Sweep collector is the default.
.TP
\fBmode=balanced|throughput|pause\fR[:\fImax-pause\fR]
Specifies what should be the garbage collector's target. The `throughput'
mode aims to reduce time spent in the garbage collector and improve
application speed, the `pause' mode aims to keep pause times to a minimum
and it receives the argument \fImax-pause\fR which specifies the maximum
pause time in milliseconds that is acceptable and the `balanced' mode
which is a general purpose optimal mode.
.TP
\fBsoft-heap-limit=\fIsize\fR
Once the heap size gets larger than this size, ignore what the default
major collection trigger metric says and only allow four nursery size's
of major heap growth between major collections.
.TP
\fBevacuation-threshold=\fIthreshold\fR
Sets the evacuation threshold in percent.  This option is only available
on the Mark&Sweep major collectors.  The value must be an
integer in the range 0 to 100.  The default is 66.  If the sweep phase of
the collection finds that the occupancy of a specific heap block type is
less than this percentage, it will do a copying collection for that block
type in the next major collection, thereby restoring occupancy to close
to 100 percent.  A value of 0 turns evacuation off.
.TP
\fB(no-)lazy-sweep\fR
Enables or disables lazy sweep for the Mark&Sweep collector.  If
enabled, the sweeping of individual major heap blocks is done
piecemeal whenever the need arises, typically during nursery
collections.  Lazy sweeping is enabled by default.
.TP
\fB(no-)concurrent-sweep\fR
Enables or disables concurrent sweep for the Mark&Sweep collector.  If
enabled, the iteration of all major blocks to determine which ones can
be freed and which ones have to be kept and swept, is done
concurrently with the running program.  Concurrent sweeping is enabled
by default.
.TP
\fBstack-mark=\fImark-mode\fR
Specifies how application threads should be scanned. Options are
`precise` and `conservative`. Precise marking allow the collector
to know what values on stack are references and what are not.
Conservative marking threats all values as potentially references
and leave them untouched. Precise marking reduces floating garbage
and can speed up nursery collection and allocation rate, it has
the downside of requiring a significant extra memory per compiled
method. The right option, unfortunately, requires experimentation.
.TP
\fBsave-target-ratio=\fIratio\fR
Specifies the target save ratio for the major collector. The collector
lets a given amount of memory to be promoted from the nursery due to
minor collections before it triggers a major collection. This amount
is based on how much memory it expects to free. It is represented as
a ratio of the size of the heap after a major collection.
Valid values are between 0.1 and 2.0. The default is 0.5.
Smaller values will keep the major heap size smaller but will trigger
more major collections. Likewise, bigger values will use more memory
and result in less frequent major collections.
This option is EXPERIMENTAL, so it might disappear in later versions of mono.
.TP
\fBdefault-allowance-ratio=\fIratio\fR
Specifies the default allocation allowance when the calculated size
is too small. The allocation allowance is how much memory the collector
let be promoted before triggered a major collection.
It is a ratio of the nursery size.
Valid values are between 1.0 and 10.0. The default is 4.0.
Smaller values lead to smaller heaps and more frequent major collections.
Likewise, bigger values will allow the heap to grow faster but use
more memory when it reaches a stable size.
This option is EXPERIMENTAL, so it might disappear in later versions of mono.
.TP
\fBminor=\fIminor-collector\fR
Specifies which minor collector to use. Options are `simple' which
promotes all objects from the nursery directly to the old generation,
`simple-par' which has same promotion behavior as `simple' but using
multiple workers and `split' which lets objects stay longer on the nursery
before promoting.
.TP
\fBalloc-ratio=\fIratio\fR
Specifies the ratio of memory from the nursery to be use by the alloc space.
This only can only be used with the split minor collector.
Valid values are integers between 1 and 100. Default is 60.
.TP
\fBpromotion-age=\fIage\fR
Specifies the required age of an object must reach inside the nursery before
been promoted to the old generation. This only can only be used with the
split minor collector.
Valid values are integers between 1 and 14. Default is 2.
.TP
\fB(no-)cementing\fR
Enables or disables cementing.  This can dramatically shorten nursery
collection times on some benchmarks where pinned objects are referred
to from the major heap.
.TP
\fBallow-synchronous-major\fR
This forbids the major collector from performing synchronous major collections.
The major collector might want to do a synchronous collection due to excessive
fragmentation. Disabling this might trigger OutOfMemory error in situations that
would otherwise not happen.
.ne
.RE
.TP
\fBMONO_GC_DEBUG\fR
When using Mono with the SGen garbage collector this environment
variable can be used to turn on various debugging features of the
collector.  The value of this variable is a comma separated list of
words.  Do not use these options in production.
.RS
.ne 8
.TP
\fInumber\fR
Sets the debug level to the specified number.
.TP
\fBprint-allowance\fR
After each major collection prints memory consumption for before and
after the collection and the allowance for the minor collector, i.e. how
much the heap is allowed to grow from minor collections before the next
major collection is triggered.
.TP
\fBprint-pinning\fR
Gathers statistics on the classes whose objects are pinned in the
nursery and for which global remset entries are added.  Prints those
statistics when shutting down.
.TP
\fBcollect-before-allocs\fR
.TP
\fBcheck-remset-consistency\fR
This performs a remset consistency check at various opportunities, and
also clears the nursery at collection time, instead of the default,
when buffers are allocated (clear-at-gc).  The consistency check
ensures that there are no major to minor references that are not on
the remembered sets.
.TP
\fBmod-union-consistency-check\fR
Checks that the mod-union cardtable is consistent before each
finishing major collection pause.  This check is only applicable to
concurrent major collectors.
.TP
\fBcheck-mark-bits\fR
Checks that mark bits in the major heap are consistent at the end of
each major collection.  Consistent mark bits mean that if an object is
marked, all objects that it had references to must also be marked.
.TP
\fBcheck-nursery-pinned\fR
After nursery collections, and before starting concurrent collections,
check whether all nursery objects are pinned, or not pinned -
depending on context.  Does nothing when the split nursery collector
is used.
.TP
\fBxdomain-checks\fR
Performs a check to make sure that no references are left to an
unloaded AppDomain.
.TP
\fBclear-at-tlab-creation\fR
Clears the nursery incrementally when the thread local allocation
buffers (TLAB) are created.  The default setting clears the whole
nursery at GC time.
.TP
\fBdebug-clear-at-tlab-creation\fR
Clears the nursery incrementally when the thread local allocation
buffers (TLAB) are created, but at GC time fills it with the byte
`0xff`, which should result in a crash more quickly if
`clear-at-tlab-creation` doesn't work properly.
.TP
\fBclear-at-gc\fR
This clears the nursery at GC time instead of doing it when the thread
local allocation buffer (TLAB) is created.  The default is to clear
the nursery at TLAB creation time.
.TP
\fBdisable-minor\fR
Don't do minor collections.  If the nursery is full, a major collection
is triggered instead, unless it, too, is disabled.
.TP
\fBdisable-major\fR
Don't do major collections.
.TP
\fBconservative-stack-mark\fR
Forces the GC to scan the stack conservatively, even if precise
scanning is available.
.TP
\fBno-managed-allocator\fR
Disables the managed allocator.
.TP
\fBcheck-scan-starts\fR
If set, does a plausibility check on the scan_starts before and after each collection
.TP
\fBverify-nursery-at-minor-gc\fR
If set, does a complete object walk of the nursery at the start of each minor collection.
.TP
\fBdump-nursery-at-minor-gc\fR
If set, dumps the contents of the nursery at the start of each minor collection. Requires 
verify-nursery-at-minor-gc to be set.
.TP
\fBheap-dump=\fIfile\fR
Dumps the heap contents to the specified file.   To visualize the
information, use the mono-heapviz tool.
.TP
\fBbinary-protocol=\fIfile\fR
Outputs the debugging output to the specified file.   For this to
work, Mono needs to be compiled with the BINARY_PROTOCOL define on
sgen-gc.c.   You can then use this command to explore the output
.nf
                sgen-grep-binprot 0x1234 0x5678 < file
.fi
.TP
\fBnursery-canaries\fR
If set, objects allocated in the nursery are suffixed with a canary (guard)
word, which is checked on each minor collection. Can be used to detect/debug
heap corruption issues.

.TP
\fBdo-not-finalize(=\fIclasses\fB)\fR
If enabled, finalizers will not be run.  Everything else will be
unaffected: finalizable objects will still be put into the
finalization queue where they survive until they're scheduled to
finalize.  Once they're not in the queue anymore they will be
collected regularly.  If a list of comma-separated class names is
given, only objects from those classes will not be finalized.

.TP
\fBlog-finalizers\fR
Log verbosely around the finalization process to aid debugging.
.ne
.RE
.TP
\fBMONO_GAC_PREFIX\fR
Provides a prefix the runtime uses to look for Global Assembly Caches.
Directories are separated by the platform path separator (colons on
unix). MONO_GAC_PREFIX should point to the top directory of a prefixed
install. Or to the directory provided in the gacutil /gacdir command. Example:
.B /home/username/.mono:/usr/local/mono/
.TP
\fBMONO_IOMAP\fR
Enables some filename rewriting support to assist badly-written
applications that hard-code Windows paths.  Set to a colon-separated
list of "drive" to strip drive letters, or "case" to do
case-insensitive file matching in every directory in a path.  "all"
enables all rewriting methods.  (Backslashes are always mapped to
slashes if this variable is set to a valid option).
.fi
.Sp
For example, this would work from the shell:
.nf

        MONO_IOMAP=drive:case
        export MONO_IOMAP

.fi
If you are using mod_mono to host your web applications, you can use
the 
.B MonoIOMAP
directive instead, like this:
.nf

        MonoIOMAP <appalias> all

.fi
See mod_mono(8) for more details.

Additionally. Mono includes a profiler module which allows one to track what
adjustements to file paths IOMAP code needs to do. The tracking code reports
the managed location (full stack trace) from which the IOMAP-ed call was made and,
on process exit, the locations where all the IOMAP-ed strings were created in
managed code. The latter report is only approximate as it is not always possible
to estimate the actual location where the string was created. The code uses simple
heuristics - it analyzes stack trace leading back to the string allocation location
and ignores all the managed code which lives in assemblies installed in GAC as well as in the
class libraries shipped with Mono (since they are assumed to be free of case-sensitivity
issues). It then reports the first location in the user's code - in most cases this will be
the place where the string is allocated or very close to the location. The reporting code
is implemented as a custom profiler module (see the "PROFILING" section) and can be loaded
in the following way:
.fi
.Sp
.nf

        mono --profile=iomap yourapplication.exe

.fi
Note, however, that Mono currently supports only one profiler module
at a time.
.TP
\fBMONO_LLVM\fR
When Mono is using the LLVM code generation backend you can use this
environment variable to pass code generation options to the LLVM
compiler.   
.TP
\fBMONO_MANAGED_WATCHER\fR
If set to "disabled", System.IO.FileSystemWatcher will use a file watcher 
implementation which silently ignores all the watching requests.
If set to any other value, System.IO.FileSystemWatcher will use the default
managed implementation (slow). If unset, mono will try to use inotify, FAM, 
Gamin, kevent under Unix systems and native API calls on Windows, falling 
back to the managed implementation on error.
.TP
\fBMONO_MESSAGING_PROVIDER\fR
Mono supports a plugin model for its implementation of System.Messaging making
it possible to support a variety of messaging implementations (e.g. AMQP, ActiveMQ).
To specify which messaging implementation is to be used the evironement variable
needs to be set to the full class name for the provider.  E.g. to use the RabbitMQ based
AMQP implementation the variable should be set to:

.nf
Mono.Messaging.RabbitMQ.RabbitMQMessagingProvider,Mono.Messaging.RabbitMQ
.TP
\fBMONO_NO_SMP\fR
If set causes the mono process to be bound to a single processor. This may be
useful when debugging or working around race conditions.
.TP
\fBMONO_NO_TLS\fR
Disable inlining of thread local accesses. Try setting this if you get a segfault
early on in the execution of mono.
.TP
\fBMONO_PATH\fR
Provides a search path to the runtime where to look for library
files.   This is a tool convenient for debugging applications, but
should not be used by deployed applications as it breaks the assembly
loader in subtle ways. 
.Sp
Directories are separated by the platform path separator (colons on unix). Example:
.B /home/username/lib:/usr/local/mono/lib
.Sp
Relative paths are resolved based on the launch-time current directory.
.Sp
Alternative solutions to MONO_PATH include: installing libraries into
the Global Assembly Cache (see gacutil(1)) or having the dependent
libraries side-by-side with the main executable.
.Sp
For a complete description of recommended practices for application
deployment, see
http://www.mono-project.com/docs/getting-started/application-deployment/
.TP
\fBMONO_SHARED_DIR\fR
If set its the directory where the ".wapi" handle state is stored.
This is the directory where the Windows I/O Emulation layer stores its
shared state data (files, events, mutexes, pipes).  By default Mono
will store the ".wapi" directory in the users's home directory.
.TP 
\fBMONO_SHARED_HOSTNAME\fR
Uses the string value of this variable as a replacement for the host name when
creating file names in the ".wapi" directory. This helps if the host name of
your machine is likely to be changed when a mono application is running or if
you have a .wapi directory shared among several different computers.
.Sp
Mono typically uses the hostname to create the files that are used to
share state across multiple Mono processes.  This is done to support
home directories that might be shared over the network.
.TP
\fBMONO_STRICT_IO_EMULATION\fR
If set, extra checks are made during IO operations.  Currently, this
includes only advisory locks around file writes.
.TP
\fBMONO_THEME\fR
The name of the theme to be used by Windows.Forms.   Available themes today
include "clearlooks", "nice" and "win32".
.Sp
The default is "win32".  
.TP
\fBMONO_TLS_SESSION_CACHE_TIMEOUT\fR
The time, in seconds, that the SSL/TLS session cache will keep it's entry to
avoid a new negotiation between the client and a server. Negotiation are very
CPU intensive so an application-specific custom value may prove useful for 
small embedded systems.
.Sp
The default is 180 seconds.
.TP
\fBMONO_THREADS_PER_CPU\fR
The minimum number of threads in the general threadpool will be 
MONO_THREADS_PER_CPU * number of CPUs. The default value for this
variable is 1.
.TP
\fBMONO_XMLSERIALIZER_THS\fR
Controls the threshold for the XmlSerializer to produce a custom
serializer for a given class instead of using the Reflection-based
interpreter.  The possible values are `no' to disable the use of a
custom serializer or a number to indicate when the XmlSerializer
should start serializing.   The default value is 50, which means that
the a custom serializer will be produced on the 50th use.
.TP
\fBMONO_X509_REVOCATION_MODE\fR
Sets the revocation mode used when validating a X509 certificate chain (https,
ftps, smtps...).  The default is 'nocheck', which performs no revocation check
at all. The other possible values are 'offline', which performs CRL check (not
implemented yet) and 'online' which uses OCSP and CRL to verify the revocation
status (not implemented yet).
.TP
\fBNO_PROXY\fR
(Also \fBno_proxy\fR) If both \fBHTTP_PROXY\fR and \fBNO_PROXY\fR are
set, \fBNO_PROXY\fR will be treated as a comma-separated list of "bypass" domains
which will not be sent through the proxy. Domains in \fBNO_PROXY\fR may contain
wildcards, as in "*.mono-project.com" or "build????.local". Not supported on
Windows, Mac OS, iOS or Android.
.SH ENVIRONMENT VARIABLES FOR DEBUGGING
.TP
\fBMONO_ASPNET_NODELETE\fR
If set to any value, temporary source files generated by ASP.NET support
classes will not be removed. They will be kept in the user's temporary
directory.
.TP
\fBMONO_DEBUG\fR
If set, enables some features of the runtime useful for debugging.
This variable should contain a comma separated list of debugging options.
Currently, the following options are supported:
.RS
.ne 8
.TP
\fBalign-small-structs\fR
Enables small structs alignment to 4/8 bytes.
.TP
\fBarm-use-fallback-tls\fR
When this option is set on ARM, a fallback TLS will be used instead
of the default fast TLS.
.TP
\fBbreak-on-unverified\fR
If this variable is set, when the Mono VM runs into a verification
problem, instead of throwing an exception it will break into the
debugger.  This is useful when debugging verifier problems
.TP
\fBcasts\fR
This option can be used to get more detailed information from
InvalidCast exceptions, it will provide information about the types
involved.     
.TP
\fBcheck-pinvoke-callconv\fR
This option causes the runtime to check for calling convention
mismatches when using pinvoke, i.e. mixing cdecl/stdcall. It only
works on windows. If a mismatch is detected, an
ExecutionEngineException is thrown.
.TP
\fBcollect-pagefault-stats\fR
Collects information about pagefaults.   This is used internally to
track the number of page faults produced to load metadata.  To display
this information you must use this option with "--stats" command line
option.
.TP
\fBdebug-domain-unload\fR
When this option is set, the runtime will invalidate the domain memory
pool instead of destroying it.
.TP
\fBdisable_omit_fp\fR
Disables a compiler optimization where the frame pointer is omitted
from the stack. This optimization can interact badly with debuggers.
.TP
\fBdont-free-domains\fR
This is an Optimization for multi-AppDomain applications (most
commonly ASP.NET applications).  Due to internal limitations Mono,
Mono by default does not use typed allocations on multi-appDomain
applications as they could leak memory when a domain is unloaded. 
.Sp
Although this is a fine default, for applications that use more than
on AppDomain heavily (for example, ASP.NET applications) it is worth
trading off the small leaks for the increased performance
(additionally, since ASP.NET applications are not likely going to
unload the application domains on production systems, it is worth
using this feature). 
.TP
\fBdyn-runtime-invoke\fR
Instructs the runtime to try to use a generic runtime-invoke wrapper
instead of creating one invoke wrapper.
.TP
\fBexplicit-null-checks\fR
Makes the JIT generate an explicit NULL check on variable dereferences
instead of depending on the operating system to raise a SIGSEGV or
another form of trap event when an invalid memory location is
accessed.
.TP
\fBgdb\fR 
Equivalent to setting the \fBMONO_XDEBUG\fR variable, this emits
symbols into a shared library as the code is JITed that can be loaded
into GDB to inspect symbols.
.TP
\fBgen-seq-points\fR 
Automatically generates sequence points where the
IL stack is empty.  These are places where the debugger can set a
breakpoint.
.TP
\fBno-compact-seq-points\fR
Unless the option is used, the runtime generates sequence points data that
maps native offsets to IL offsets. Sequence point data is used to
display IL offset in stacktraces. Stacktraces with IL offsets can be
symbolicated using mono-symbolicate tool.
.TP
\fBhandle-sigint\fR
Captures the interrupt signal (Control-C) and displays a stack trace
when pressed.  Useful to find out where the program is executing at a
given point.  This only displays the stack trace of a single thread. 
.TP
\fBinit-stacks\fR
Instructs the runtime to initialize the stack with
some known values (0x2a on x86-64) at the start of a method to assist
in debuggin the JIT engine.
.TP
\fBkeep-delegates\fR
This option will leak delegate trampolines that are no longer
referenced as to present the user with more information about a
delegate misuse.  Basically a delegate instance might be created,
passed to unmanaged code, and no references kept in managed code,
which will garbage collect the code.  With this option it is possible
to track down the source of the problems. 
.TP
\fBno-gdb-backtrace\fR
This option will disable the GDB backtrace emitted by the runtime
after a SIGSEGV or SIGABRT in unmanaged code.
.TP
\fBpartial-sharing\fR
When this option is set, the runtime can share generated code between
generic types effectively reducing the amount of code generated.
.TP
\fBreverse-pinvoke-exceptions
This option will cause mono to abort with a descriptive message when
during stack unwinding after an exception it reaches a native stack
frame. This happens when a managed delegate is passed to native code,
and the managed delegate throws an exception. Mono will normally try
to unwind the stack to the first (managed) exception handler, and it
will skip any native stack frames in the process. This leads to 
undefined behaviour (since mono doesn't know how to process native
frames), leaks, and possibly crashes too.
.TP
\fBsingle-imm-size\fR
This guarantees that each time managed code is compiled the same
instructions and registers are used, regardless of the size of used
values.
.TP
\fBsoft-breakpoints\fR
This option allows using single-steps and breakpoints in hardware
where we cannot do it with signals.
.TP
\fBsuspend-on-native-crash\fR
This option will suspend the program when a native crash occurs (SIGSEGV, SIGILL, ...).
This is useful for debugging crashes which do not happen under gdb,
since a live process contains more information than a core file.
.TP
\fBsuspend-on-sigsegv\fR
Same as \fBsuspend-on-native-crash\fR.
.TP
\fBsuspend-on-exception\fR
This option will suspend the program when an exception occurs.
.TP
\fBsuspend-on-unhandled\fR
This option will suspend the program when an unhandled exception occurs.
.ne
.RE
.TP
\fBMONO_LOG_LEVEL\fR
The logging level, possible values are `error', `critical', `warning',
`message', `info' and `debug'.  See the DEBUGGING section for more
details.
.TP
\fBMONO_LOG_MASK\fR
Controls the domain of the Mono runtime that logging will apply to. 
If set, the log mask is changed to the set value. Possible values are
"asm" (assembly loader), "type", "dll" (native library loader), "gc"
(garbage collector), "cfg" (config file loader), "aot" (precompiler),
"security" (e.g. Moonlight CoreCLR support) and "all". 
The default value is "all". Changing the mask value allows you to display only 
messages for a certain component. You can use multiple masks by comma 
separating them. For example to see config file messages and assembly loader
messages set you mask to "asm,cfg".
.TP
\fBMONO_LOG_DEST\fR
Controls where trace log messages are written. If not set then the messages go to stdout. 
If set, the string either specifies a path to a file that will have messages appended to
it, or the string "syslog" in which case the messages will be written to the system log.
Under Windows, this is simulated by writing to a file called "mono.log". 
\fBMONO_LOG_HEADER\fR
Controls whether trace log messages not directed to syslog have the id, timestamp, and
pid as the prefix to the log message. To enable a header this environment variable need
just be non-null. 
.TP
\fBMONO_TRACE\fR
Used for runtime tracing of method calls. The format of the comma separated
trace options is:
.nf

        [-]M:method name
        [-]N:namespace
        [-]T:class name
        [-]all
        [-]program
        disabled                Trace output off upon start.

.fi
You can toggle trace output on/off sending a SIGUSR2 signal to the program.
.TP
\fBMONO_TRACE_LISTENER\fR
If set, enables the System.Diagnostics.DefaultTraceListener, which will 
print the output of the System.Diagnostics Trace and Debug classes.  
It can be set to a filename, and to Console.Out or Console.Error to display
output to standard output or standard error, respectively. If it's set to
Console.Out or Console.Error you can append an optional prefix that will
be used when writing messages like this: Console.Error:MyProgramName.
See the System.Diagnostics.DefaultTraceListener documentation for more
information.
.TP
\fBMONO_WCF_TRACE\fR
This eases WCF diagnostics functionality by simply outputs all log messages from WCF engine to "stdout", "stderr" or any file passed to this environment variable. The log format is the same as usual diagnostic output.
.TP
\fBMONO_XEXCEPTIONS\fR
This throws an exception when a X11 error is encountered; by default a
message is displayed but execution continues
.TP
\fBMONO_XMLSERIALIZER_DEBUG\fR
Set this value to 1 to prevent the serializer from removing the
temporary files that are created for fast serialization;  This might
be useful when debugging.
.TP
\fBMONO_XSYNC\fR
This is used in the System.Windows.Forms implementation when running
with the X11 backend.  This is used to debug problems in Windows.Forms
as it forces all of the commands send to X11 server to be done
synchronously.   The default mode of operation is asynchronous which
makes it hard to isolate the root of certain problems.
.TP
\fBMONO_XDEBUG\fR
When the the MONO_XDEBUG env var is set, debugging info for JITted
code is emitted into a shared library, loadable into gdb. This enables,
for example, to see managed frame names on gdb backtraces.   
.TP
\fBMONO_VERBOSE_METHOD\fR
Enables the maximum JIT verbosity for the specified method. This is
very helpfull to diagnose a miscompilation problems of a specific
method.
.TP
\fBMONO_JIT_DUMP_METHOD\fR
Enables sending of the JITs intermediate representation for a specified
method to the IdealGraphVisualizer tool.
.TP
\fBMONO_VERBOSE_HWCAP\fR
If set, makes the JIT output information about detected CPU features
(such as SSE, CMOV, FCMOV, etc) to stdout.
.TP
\fBMONO_CONSERVATIVE_HWCAP\fR
If set, the JIT will not perform any hardware capability detection. This
may be useful to pinpoint the cause of JIT issues. This is the default
when Mono is built as an AOT cross compiler, so that the generated code
will run on most hardware.
.SH VALGRIND
If you want to use Valgrind, you will find the file `mono.supp'
useful, it contains the suppressions for the GC which trigger
incorrect warnings.  Use it like this:
.nf
    valgrind --suppressions=mono.supp mono ...
.fi
.SH DTRACE
On some platforms, Mono can expose a set of DTrace probes (also known
as user-land statically defined, USDT Probes).
.TP
They are defined in the file `mono.d'.
.TP
.B ves-init-begin, ves-init-end
.Sp
Begin and end of runtime initialization.
.TP
.B method-compile-begin, method-compile-end
.Sp
Begin and end of method compilation.
The probe arguments are class name, method name and signature,
and in case of method-compile-end success or failure of compilation.
.TP
.B gc-begin, gc-end
.Sp
Begin and end of Garbage Collection.
.TP
To verify the availability of the probes, run:
.nf
    dtrace -P mono'$target' -l -c mono
.fi
.SH PERMISSIONS
Mono's Ping implementation for detecting network reachability can
create the ICMP packets itself without requiring the system ping
command to do the work.  If you want to enable this on Linux for
non-root users, you need to give the Mono binary special permissions.
.PP
As root, run this command:
.nf
   # setcap cap_net_raw=+ep /usr/bin/mono
.fi
.SH FILES
On Unix assemblies are loaded from the installation lib directory.  If you set
`prefix' to /usr, the assemblies will be located in /usr/lib.  On
Windows, the assemblies are loaded from the directory where mono and
mint live.
.TP
.B ~/.mono/aot-cache
.Sp
The directory for the ahead-of-time compiler demand creation
assemblies are located. 
.TP
.B /etc/mono/config, ~/.mono/config
.Sp
Mono runtime configuration file.  See the mono-config(5) manual page
for more information.
.TP
.B ~/.config/.mono/certs, /usr/share/.mono/certs
.Sp
Contains Mono certificate stores for users / machine. See the certmgr(1) 
manual page for more information on managing certificate stores and
the mozroots(1) page for information on how to import the Mozilla root
certificates into the Mono certificate store. 
.TP
.B ~/.mono/assemblies/ASSEMBLY/ASSEMBLY.config
.Sp
Files in this directory allow a user to customize the configuration
for a given system assembly, the format is the one described in the
mono-config(5) page. 
.TP
.B ~/.config/.mono/keypairs, /usr/share/.mono/keypairs
.Sp
Contains Mono cryptographic keypairs for users / machine. They can be 
accessed by using a CspParameters object with DSACryptoServiceProvider
and RSACryptoServiceProvider classes.
.TP
.B ~/.config/.isolatedstorage, ~/.local/share/.isolatedstorage, /usr/share/.isolatedstorage
.Sp
Contains Mono isolated storage for non-roaming users, roaming users and 
local machine. Isolated storage can be accessed using the classes from 
the System.IO.IsolatedStorage namespace.
.TP
.B <assembly>.config
.Sp
Configuration information for individual assemblies is loaded by the
runtime from side-by-side files with the .config files, see the
http://www.mono-project.com/Config for more information.
.TP
.B Web.config, web.config
.Sp
ASP.NET applications are configured through these files, the
configuration is done on a per-directory basis.  For more information
on this subject see the http://www.mono-project.com/Config_system.web
page. 
.SH MAILING LISTS
Mailing lists are listed at the
http://www.mono-project.com/community/help/mailing-lists/
.SH WEB SITE
http://www.mono-project.com
.SH SEE ALSO
.PP
certmgr(1), cert-sync(1), csharp(1), gacutil(1), mcs(1), mdb(1), monodis(1),
mono-config(5), mprof-report(1), pdb2mdb(1), xsp(1), mod_mono(8).
.PP
For more information on AOT:
http://www.mono-project.com/docs/advanced/aot/
.PP
For ASP.NET-related documentation, see the xsp(1) manual page