* See Analog Devices ADT7463 datasheet, Rev C (2004):
* http://www.analog.com/en/prod/0,,766_825_ADT7463,00.html
*/
-static void adt7463_init(device_t dev)
+static void adt7463_init(device_t adt7463)
{
- device_t smbus_dev, adt7463;
- struct device_path path;
int result;
- /* Find the SMBus controller (AMD-8111). */
- smbus_dev = dev_find_device(0x1022, 0x746b, 0);
- if (!smbus_dev)
- die("SMBus controller not found\n");
- printk(BIOS_DEBUG, "SMBus controller found\n");
-
- /* Find the ADT7463 device. */
- path.type = DEVICE_PATH_I2C;
- path.i2c.device = 0x2d;
- adt7463 = find_dev_path(smbus_dev->link_list, &path);
- if (!adt7463)
- die("ADT7463 not found\n");
- printk(BIOS_DEBUG, "ADT7463 found\n");
+ printk(BIOS_DEBUG, "ADT7463 is %s\n", dev_path(adt7463));
/* Set all fans to 'Fastest Speed Calculated by All 3 Temperature
* Channels Controls PWMx'.
dev->ops = &adt7463_operations;
}
-struct chip_operations mainboard_ops = {
+struct chip_operations drivers_i2c_adt7463_ops = {
CHIP_NAME("adt7463")
.enable_dev = enable_dev,
};
chip drivers/generic/generic #dimm 1-1-1
device i2c 57 on end
end
- chip drivers/i2c/adm1027 # ADT7463A CPU0/1 temp, CPU1 vid, SYS FAN 1/2/3
+ chip drivers/i2c/adt7463 # CPU0/1 temp, CPU1 vid, SYS FAN 1/2/3
device i2c 2d on end
end
chip drivers/generic/generic # Winbond HWM 0x54 CPU0/1 VRM temp, SYSFAN 4,CPU0 vid, CPU0/1 FAN