--- /dev/null
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 Arastra, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+/* This code is based on src/northbridge/intel/e7520/northbridge.c */
+
+#include <console/console.h>
+#include <arch/io.h>
+#include <stdint.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/hypertransport.h>
+#include <stdlib.h>
+#include <string.h>
+#include <bitops.h>
+#include <cpu/cpu.h>
+#include "chip.h"
+#include "i3100.h"
+
+
+static u32 max_bus;
+
+static void ram_resource(device_t dev, u32 index,
+ u32 basek, u32 sizek)
+{
+ struct resource *resource;
+
+ resource = new_resource(dev, index);
+ resource->base = ((resource_t)basek) << 10;
+ resource->size = ((resource_t)sizek) << 10;
+ resource->flags = IORESOURCE_MEM | IORESOURCE_CACHEABLE | \
+ IORESOURCE_FIXED | IORESOURCE_STORED | IORESOURCE_ASSIGNED;
+}
+
+
+static void pci_domain_read_resources(device_t dev)
+{
+ struct resource *resource;
+
+ /* Initialize the system wide io space constraints */
+ resource = new_resource(dev, IOINDEX_SUBTRACTIVE(0,0));
+ resource->base = 0;
+ resource->size = 0;
+ resource->align = 0;
+ resource->gran = 0;
+ resource->limit = 0xffffUL;
+ resource->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE | IORESOURCE_ASSIGNED;
+
+ /* Initialize the system wide memory resources constraints */
+ resource = new_resource(dev, IOINDEX_SUBTRACTIVE(1,0));
+ resource->base = 0;
+ resource->size = 0;
+ resource->align = 0;
+ resource->gran = 0;
+ resource->limit = 0xffffffffUL;
+ resource->flags = IORESOURCE_MEM | IORESOURCE_SUBTRACTIVE | IORESOURCE_ASSIGNED;
+}
+
+static void tolm_test(void *gp, struct device *dev, struct resource *new)
+{
+ struct resource **best_p = gp;
+ struct resource *best;
+ best = *best_p;
+ if (!best || (best->base > new->base)) {
+ best = new;
+ }
+ *best_p = best;
+}
+
+static u32 find_pci_tolm(struct bus *bus)
+{
+ struct resource *min;
+ u32 tolm;
+ min = 0;
+ search_bus_resources(bus, IORESOURCE_MEM, IORESOURCE_MEM, tolm_test, &min);
+ tolm = 0xffffffffUL;
+ if (min && tolm > min->base) {
+ tolm = min->base;
+ }
+ return tolm;
+}
+
+
+static void pci_domain_set_resources(device_t dev)
+{
+ device_t mc_dev;
+ u32 pci_tolm;
+
+ pci_tolm = find_pci_tolm(&dev->link[0]);
+
+#if 1
+ printk_debug("PCI mem marker = %x\n", pci_tolm);
+#endif
+ /* FIXME Me temporary hack */
+ if(pci_tolm > 0xe0000000)
+ pci_tolm = 0xe0000000;
+ /* Ensure pci_tolm is 128M aligned */
+ pci_tolm &= 0xf8000000;
+ mc_dev = dev->link[0].children;
+ if (mc_dev) {
+ /* Figure out which areas are/should be occupied by RAM.
+ * This is all computed in kilobytes and converted to/from
+ * the memory controller right at the edges.
+ * Having different variables in different units is
+ * too confusing to get right. Kilobytes are good up to
+ * 4 Terabytes of RAM...
+ */
+ u16 tolm_r, remapbase_r, remaplimit_r, remapoffset_r;
+ u32 tomk, tolmk;
+ u32 remapbasek, remaplimitk, remapoffsetk;
+
+ /* Get the Top of Memory address, units are 128M */
+ tomk = ((u32)pci_read_config16(mc_dev, TOM)) << 17;
+ /* Compute the Top of Low Memory */
+ tolmk = (pci_tolm & 0xf8000000) >> 10;
+
+ if (tolmk >= tomk) {
+ /* The PCI hole does not overlap memory
+ * we won't use the remap window.
+ */
+ tolmk = tomk;
+ remapbasek = 0x3ff << 16;
+ remaplimitk = 0 << 16;
+ remapoffsetk = 0 << 16;
+ }
+ else {
+ /* The PCI memory hole overlaps memory
+ * setup the remap window.
+ */
+ /* Find the bottom of the remap window
+ * is it above 4G?
+ */
+ remapbasek = 4*1024*1024;
+ if (tomk > remapbasek) {
+ remapbasek = tomk;
+ }
+ /* Find the limit of the remap window */
+ remaplimitk = (remapbasek + (4*1024*1024 - tolmk) - (1 << 16));
+ /* Find the offset of the remap window from tolm */
+ remapoffsetk = remapbasek - tolmk;
+ }
+ /* Write the ram configruation registers,
+ * preserving the reserved bits.
+ */
+ tolm_r = pci_read_config16(mc_dev, 0xc4);
+ tolm_r = ((tolmk >> 17) << 11) | (tolm_r & 0x7ff);
+ pci_write_config16(mc_dev, 0xc4, tolm_r);
+
+ remapbase_r = pci_read_config16(mc_dev, 0xc6);
+ remapbase_r = (remapbasek >> 16) | (remapbase_r & 0xfc00);
+ pci_write_config16(mc_dev, 0xc6, remapbase_r);
+
+ remaplimit_r = pci_read_config16(mc_dev, 0xc8);
+ remaplimit_r = (remaplimitk >> 16) | (remaplimit_r & 0xfc00);
+ pci_write_config16(mc_dev, 0xc8, remaplimit_r);
+
+ remapoffset_r = pci_read_config16(mc_dev, 0xca);
+ remapoffset_r = (remapoffsetk >> 16) | (remapoffset_r & 0xfc00);
+ pci_write_config16(mc_dev, 0xca, remapoffset_r);
+
+ /* Report the memory regions */
+ ram_resource(dev, 3, 0, 640);
+ ram_resource(dev, 4, 768, (tolmk - 768));
+ if (tomk > 4*1024*1024) {
+ ram_resource(dev, 5, 4096*1024, tomk - 4*1024*1024);
+ }
+ if (remaplimitk >= remapbasek) {
+ ram_resource(dev, 6, remapbasek,
+ (remaplimitk + 64*1024) - remapbasek);
+ }
+ }
+ assign_resources(&dev->link[0]);
+}
+
+static u32 pci_domain_scan_bus(device_t dev, u32 max)
+{
+ max = pci_scan_bus(&dev->link[0], 0, 0xff, max);
+ if (max > max_bus) {
+ max_bus = max;
+ }
+ return max;
+}
+
+static struct device_operations pci_domain_ops = {
+ .read_resources = pci_domain_read_resources,
+ .set_resources = pci_domain_set_resources,
+ .enable_resources = enable_childrens_resources,
+ .init = 0,
+ .scan_bus = pci_domain_scan_bus,
+ .ops_pci_bus = &pci_cf8_conf1, /* Do we want to use the memory mapped space here? */
+};
+
+static void mc_read_resources(device_t dev)
+{
+ struct resource *resource;
+
+ pci_dev_read_resources(dev);
+
+ resource = new_resource(dev, 0xcf);
+ resource->base = 0xe0000000;
+ resource->size = max_bus * 4096*256;
+ resource->flags = IORESOURCE_MEM | IORESOURCE_FIXED | IORESOURCE_STORED | IORESOURCE_ASSIGNED;
+}
+
+static void mc_set_resources(device_t dev)
+{
+ struct resource *resource, *last;
+
+ last = &dev->resource[dev->resources];
+ resource = find_resource(dev, 0xcf);
+ if (resource) {
+ report_resource_stored(dev, resource, "<mmconfig>");
+ }
+ pci_dev_set_resources(dev);
+}
+
+static void intel_set_subsystem(device_t dev, unsigned vendor, unsigned device)
+{
+ pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
+ ((device & 0xffff) << 16) | (vendor & 0xffff));
+}
+
+static struct pci_operations intel_pci_ops = {
+ .set_subsystem = intel_set_subsystem,
+};
+
+static struct device_operations mc_ops = {
+ .read_resources = mc_read_resources,
+ .set_resources = mc_set_resources,
+ .enable_resources = pci_dev_enable_resources,
+ .init = 0,
+ .scan_bus = 0,
+ .ops_pci = &intel_pci_ops,
+};
+
+static struct pci_driver mc_driver __pci_driver = {
+ .ops = &mc_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = PCI_DEVICE_ID_INTEL_3100_MC,
+};
+
+static void cpu_bus_init(device_t dev)
+{
+ initialize_cpus(&dev->link[0]);
+}
+
+static void cpu_bus_noop(device_t dev)
+{
+}
+
+static struct device_operations cpu_bus_ops = {
+ .read_resources = cpu_bus_noop,
+ .set_resources = cpu_bus_noop,
+ .enable_resources = cpu_bus_noop,
+ .init = cpu_bus_init,
+ .scan_bus = 0,
+};
+
+
+static void enable_dev(device_t dev)
+{
+ /* Set the operations if it is a special bus type */
+ if (dev->path.type == DEVICE_PATH_PCI_DOMAIN) {
+ dev->ops = &pci_domain_ops;
+ }
+ else if (dev->path.type == DEVICE_PATH_APIC_CLUSTER) {
+ dev->ops = &cpu_bus_ops;
+ }
+}
+
+struct chip_operations northbridge_intel_i3100_ops = {
+ CHIP_NAME("Intel 3100 Northbridge")
+ .enable_dev = enable_dev,
+};
--- /dev/null
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 Arastra, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+/* This code is based on src/northbridge/intel/e7520/raminit.c */
+
+#include <cpu/x86/mem.h>
+#include <cpu/x86/mtrr.h>
+#include <cpu/x86/cache.h>
+#include "raminit.h"
+#include "i3100.h"
+
+/* DDR2 memory controller register space */
+#define MCBAR 0x90000000
+
+static void sdram_set_registers(const struct mem_controller *ctrl)
+{
+ static const u32 register_values[] = {
+
+ /* CKDIS 0x8c disable clocks */
+ PCI_ADDR(0, 0x00, 0, CKDIS), 0xffff0000, 0x0000ffff,
+
+ /* 0x9c Device present and extended RAM control
+ * DEVPRES is very touchy, hard code the initialization
+ * of PCI-E ports here.
+ */
+ PCI_ADDR(0, 0x00, 0, DEVPRES), 0x00000000, 0x07020801 | DEVPRES_CONFIG,
+
+ /* 0xc8 Remap RAM base and limit off */
+ PCI_ADDR(0, 0x00, 0, REMAPLIMIT), 0x00000000, 0x03df0000,
+
+ /* ??? */
+ PCI_ADDR(0, 0x00, 0, 0xd8), 0x00000000, 0xb5930000,
+ PCI_ADDR(0, 0x00, 0, 0xe8), 0x00000000, 0x00004a2a,
+
+ /* 0x50 scrub */
+ PCI_ADDR(0, 0x00, 0, MCHCFG0), 0xfce0ffff, 0x00006000, /* 6000 */
+
+ /* 0x58 0x5c PAM */
+ PCI_ADDR(0, 0x00, 0, PAM-1), 0xcccccc7f, 0x33333000,
+ PCI_ADDR(0, 0x00, 0, PAM+3), 0xcccccccc, 0x33333333,
+
+ /* 0xf4 */
+ PCI_ADDR(0, 0x00, 0, DEVPRES1), 0xffbffff, (1<<22)|(6<<2) | DEVPRES1_CONFIG,
+
+ /* 0x14 */
+ PCI_ADDR(0, 0x00, 0, IURBASE), 0x00000fff, MCBAR |0,
+ };
+ int i;
+ int max;
+
+ max = sizeof(register_values)/sizeof(register_values[0]);
+ for(i = 0; i < max; i += 3) {
+ device_t dev;
+ u32 where;
+ u32 reg;
+ dev = (register_values[i] & ~0xff) - PCI_DEV(0, 0x00, 0) + ctrl->f0;
+ where = register_values[i] & 0xff;
+ reg = pci_read_config32(dev, where);
+ reg &= register_values[i+1];
+ reg |= register_values[i+2];
+ pci_write_config32(dev, where, reg);
+ }
+ print_spew("done.\r\n");
+}
+
+struct dimm_size {
+ u32 side1;
+ u32 side2;
+};
+
+static struct dimm_size spd_get_dimm_size(u16 device)
+{
+ /* Calculate the log base 2 size of a DIMM in bits */
+ struct dimm_size sz;
+ int value, low, ddr2;
+ sz.side1 = 0;
+ sz.side2 = 0;
+
+ /* Note it might be easier to use byte 31 here, it has the DIMM size as
+ * a multiple of 4MB. The way we do it now we can size both
+ * sides of an assymetric dimm.
+ */
+ value = spd_read_byte(device, 3); /* rows */
+ if (value < 0) goto hw_err;
+ if ((value & 0xf) == 0) goto val_err;
+ sz.side1 += value & 0xf;
+
+ value = spd_read_byte(device, 4); /* columns */
+ if (value < 0) goto hw_err;
+ if ((value & 0xf) == 0) goto val_err;
+ sz.side1 += value & 0xf;
+
+ value = spd_read_byte(device, 17); /* banks */
+ if (value < 0) goto hw_err;
+ if ((value & 0xff) == 0) goto val_err;
+ sz.side1 += log2(value & 0xff);
+
+ /* Get the module data width and convert it to a power of two */
+ value = spd_read_byte(device, 7); /* (high byte) */
+ if (value < 0) goto hw_err;
+ value &= 0xff;
+ value <<= 8;
+
+ low = spd_read_byte(device, 6); /* (low byte) */
+ if (low < 0) goto hw_err;
+ value = value | (low & 0xff);
+ if ((value != 72) && (value != 64)) goto val_err;
+ sz.side1 += log2(value);
+
+ /* side 2 */
+ value = spd_read_byte(device, 5); /* number of physical banks */
+
+ if (value < 0) goto hw_err;
+ value &= 7;
+ value++;
+ if (value == 1) goto out;
+ if (value != 2) goto val_err;
+
+ /* Start with the symmetrical case */
+ sz.side2 = sz.side1;
+
+ value = spd_read_byte(device, 3); /* rows */
+ if (value < 0) goto hw_err;
+ if ((value & 0xf0) == 0) goto out; /* If symmetrical we are done */
+ sz.side2 -= (value & 0x0f); /* Subtract out rows on side 1 */
+ sz.side2 += ((value >> 4) & 0x0f); /* Add in rows on side 2 */
+
+ value = spd_read_byte(device, 4); /* columns */
+ if (value < 0) goto hw_err;
+ if ((value & 0xff) == 0) goto val_err;
+ sz.side2 -= (value & 0x0f); /* Subtract out columns on side 1 */
+ sz.side2 += ((value >> 4) & 0x0f); /* Add in columns on side 2 */
+ goto out;
+
+ val_err:
+ die("Bad SPD value\r\n");
+ /* If an hw_error occurs report that I have no memory */
+ hw_err:
+ sz.side1 = 0;
+ sz.side2 = 0;
+ out:
+ return sz;
+
+}
+
+static long spd_set_ram_size(const struct mem_controller *ctrl, long dimm_mask)
+{
+ int i;
+ int cum;
+
+ for(i = cum = 0; i < DIMM_SOCKETS; i++) {
+ struct dimm_size sz;
+ if (dimm_mask & (1 << i)) {
+ sz = spd_get_dimm_size(ctrl->channel0[i]);
+ if (sz.side1 < 29) {
+ return -1; /* Report SPD error */
+ }
+ /* convert bits to multiples of 64MB */
+ sz.side1 -= 29;
+ cum += (1 << sz.side1);
+ /* DRB = 0x60 */
+ pci_write_config8(ctrl->f0, DRB + (i*2), cum);
+ if( sz.side2 > 28) {
+ sz.side2 -= 29;
+ cum += (1 << sz.side2);
+ }
+ pci_write_config8(ctrl->f0, DRB+1 + (i*2), cum);
+ }
+ else {
+ pci_write_config8(ctrl->f0, DRB + (i*2), cum);
+ pci_write_config8(ctrl->f0, DRB+1 + (i*2), cum);
+ }
+ }
+ cum >>= 1;
+ /* set TOM top of memory 0xcc */
+ pci_write_config16(ctrl->f0, TOM, cum);
+ /* set TOLM top of low memory */
+ if(cum > 0x18) {
+ cum = 0x18;
+ }
+ cum <<= 11;
+ /* 0xc4 TOLM */
+ pci_write_config16(ctrl->f0, TOLM, cum);
+ return 0;
+}
+
+
+static u32 spd_detect_dimms(const struct mem_controller *ctrl)
+{
+ u32 dimm_mask;
+ int i;
+ dimm_mask = 0;
+ for(i = 0; i < DIMM_SOCKETS; i++) {
+ int byte;
+ u16 device;
+ device = ctrl->channel0[i];
+ if (device) {
+ byte = spd_read_byte(device, 2); /* Type */
+ if (byte == 8) {
+ dimm_mask |= (1 << i);
+ }
+ }
+ device = ctrl->channel1[i];
+ if (device) {
+ byte = spd_read_byte(device, 2);
+ if (byte == 8) {
+ dimm_mask |= (1 << (i + DIMM_SOCKETS));
+ }
+ }
+ }
+ return dimm_mask;
+}
+
+
+static int spd_set_row_attributes(const struct mem_controller *ctrl,
+ long dimm_mask)
+{
+ int value;
+ int reg;
+ int dra;
+ int cnt;
+
+ dra = 0;
+ for(cnt=0; cnt < 4; cnt++) {
+ if (!(dimm_mask & (1 << cnt))) {
+ continue;
+ }
+ reg =0;
+ value = spd_read_byte(ctrl->channel0[cnt], 3); /* rows */
+ if (value < 0) goto hw_err;
+ if ((value & 0xf) == 0) goto val_err;
+ reg += value & 0xf;
+
+ value = spd_read_byte(ctrl->channel0[cnt], 4); /* columns */
+ if (value < 0) goto hw_err;
+ if ((value & 0xf) == 0) goto val_err;
+ reg += value & 0xf;
+
+ value = spd_read_byte(ctrl->channel0[cnt], 17); /* banks */
+ if (value < 0) goto hw_err;
+ if ((value & 0xff) == 0) goto val_err;
+ reg += log2(value & 0xff);
+
+ /* Get the device width and convert it to a power of two */
+ value = spd_read_byte(ctrl->channel0[cnt], 13);
+ if (value < 0) goto hw_err;
+ value = log2(value & 0xff);
+ reg += value;
+ if(reg < 27) goto hw_err;
+ reg -= 27;
+ reg += (value << 2);
+
+ dra += reg << (cnt*8);
+ value = spd_read_byte(ctrl->channel0[cnt], 5);
+ if (value & 2)
+ dra += reg << ((cnt*8)+4);
+ }
+
+ /* 0x70 DRA */
+ pci_write_config32(ctrl->f0, DRA, dra);
+ goto out;
+
+ val_err:
+ die("Bad SPD value\r\n");
+ /* If an hw_error occurs report that I have no memory */
+ hw_err:
+ dra = 0;
+ out:
+ return dra;
+
+}
+
+
+static int spd_set_drt_attributes(const struct mem_controller *ctrl,
+ long dimm_mask, u32 drc)
+{
+ int value;
+ int reg;
+ u32 drt;
+ int cnt;
+ int first_dimm;
+ int cas_latency=0;
+ int latency;
+ u32 index = 0;
+ u32 index2 = 0;
+ static const u8 cycle_time[3] = { 0x75, 0x60, 0x50 };
+ static const u8 latency_indicies[] = { 26, 23, 9 };
+
+ /* 0x78 DRT */
+ drt = pci_read_config32(ctrl->f0, DRT);
+ drt &= 3; /* save bits 1:0 */
+
+ for(first_dimm = 0; first_dimm < 4; first_dimm++) {
+ if (dimm_mask & (1 << first_dimm))
+ break;
+ }
+
+ drt |= (1<<6); /* back to back write turn around */
+
+ drt |= (3<<18); /* Trasmax */
+
+ for(cnt=0; cnt < 4; cnt++) {
+ if (!(dimm_mask & (1 << cnt))) {
+ continue;
+ }
+ reg = spd_read_byte(ctrl->channel0[cnt], 18); /* CAS Latency */
+ /* Compute the lowest cas latency supported */
+ latency = log2(reg) -2;
+
+ /* Loop through and find a fast clock with a low latency */
+ for(index = 0; index < 3; index++, latency++) {
+ if ((latency < 2) || (latency > 4) ||
+ (!(reg & (1 << latency)))) {
+ continue;
+ }
+ value = spd_read_byte(ctrl->channel0[cnt],
+ latency_indicies[index]);
+
+ if(value <= cycle_time[drc&3]) {
+ if( latency > cas_latency) {
+ cas_latency = latency;
+ }
+ break;
+ }
+ }
+ }
+ index = (cas_latency-2);
+ if((index)==0) cas_latency = 20;
+ else if((index)==1) cas_latency = 25;
+ else cas_latency = 30;
+
+ for(cnt=0;cnt<4;cnt++) {
+ if (!(dimm_mask & (1 << cnt))) {
+ continue;
+ }
+ reg = spd_read_byte(ctrl->channel0[cnt], 27)&0x0ff;
+ if(((index>>8)&0x0ff)<reg) {
+ index &= ~(0x0ff << 8);
+ index |= (reg << 8);
+ }
+ reg = spd_read_byte(ctrl->channel0[cnt], 28)&0x0ff;
+ if(((index>>16)&0x0ff)<reg) {
+ index &= ~(0x0ff << 16);
+ index |= (reg<<16);
+ }
+ reg = spd_read_byte(ctrl->channel0[cnt], 29)&0x0ff;
+ if(((index2>>0)&0x0ff)<reg) {
+ index2 &= ~(0x0ff << 0);
+ index2 |= (reg<<0);
+ }
+ reg = spd_read_byte(ctrl->channel0[cnt], 41)&0x0ff;
+ if(((index2>>8)&0x0ff)<reg) {
+ index2 &= ~(0x0ff << 8);
+ index2 |= (reg<<8);
+ }
+ reg = spd_read_byte(ctrl->channel0[cnt], 42)&0x0ff;
+ if(((index2>>16)&0x0ff)<reg) {
+ index2 &= ~(0x0ff << 16);
+ index2 |= (reg<<16);
+ }
+ }
+
+ /* get dimm speed */
+ value = cycle_time[drc&3];
+ if(value <= 0x50) { /* 200 MHz */
+ if((index&7) > 2) {
+ drt |= (2<<2); /* CAS latency 4 */
+ cas_latency = 40;
+ } else {
+ drt |= (1<<2); /* CAS latency 3 */
+ cas_latency = 30;
+ }
+ if((index&0x0ff00)<=0x03c00) {
+ drt |= (1<<8); /* Trp RAS Precharg */
+ } else {
+ drt |= (2<<8); /* Trp RAS Precharg */
+ }
+
+ /* Trcd RAS to CAS delay */
+ if((index2&0x0ff)<=0x03c) {
+ drt |= (0<<10);
+ } else {
+ drt |= (1<<10);
+ }
+
+ /* Tdal Write auto precharge recovery delay */
+ drt |= (1<<12);
+
+ /* Trc TRS min */
+ if((index2&0x0ff00)<=0x03700)
+ drt |= (0<<14);
+ else if((index2&0xff00)<=0x03c00)
+ drt |= (1<<14);
+ else
+ drt |= (2<<14); /* spd 41 */
+
+ drt |= (2<<16); /* Twr not defined for DDR docs say use 2 */
+
+ /* Trrd Row Delay */
+ if((index&0x0ff0000)<=0x0140000) {
+ drt |= (0<<20);
+ } else if((index&0x0ff0000)<=0x0280000) {
+ drt |= (1<<20);
+ } else if((index&0x0ff0000)<=0x03c0000) {
+ drt |= (2<<20);
+ } else {
+ drt |= (3<<20);
+ }
+
+ /* Trfc Auto refresh cycle time */
+ if((index2&0x0ff0000)<=0x04b0000) {
+ drt |= (0<<22);
+ } else if((index2&0x0ff0000)<=0x0690000) {
+ drt |= (1<<22);
+ } else {
+ drt |= (2<<22);
+ }
+ /* Docs say use 55 for all 200Mhz */
+ drt |= (0x055<<24);
+ }
+ else if(value <= 0x60) { /* 167 Mhz */
+ /* according to new documentation CAS latency is 00
+ * for bits 3:2 for all 167 Mhz
+ drt |= ((index&3)<<2); */ /* set CAS latency */
+ if((index&0x0ff00)<=0x03000) {
+ drt |= (1<<8); /* Trp RAS Precharg */
+ } else {
+ drt |= (2<<8); /* Trp RAS Precharg */
+ }
+
+ /* Trcd RAS to CAS delay */
+ if((index2&0x0ff)<=0x030) {
+ drt |= (0<<10);
+ } else {
+ drt |= (1<<10);
+ }
+
+ /* Tdal Write auto precharge recovery delay */
+ drt |= (2<<12);
+
+ /* Trc TRS min */
+ drt |= (2<<14); /* spd 41, but only one choice */
+
+ drt |= (2<<16); /* Twr not defined for DDR docs say 2 */
+
+ /* Trrd Row Delay */
+ if((index&0x0ff0000)<=0x0180000) {
+ drt |= (0<<20);
+ } else if((index&0x0ff0000)<=0x0300000) {
+ drt |= (1<<20);
+ } else {
+ drt |= (2<<20);
+ }
+
+ /* Trfc Auto refresh cycle time */
+ if((index2&0x0ff0000)<=0x0480000) {
+ drt |= (0<<22);
+ } else if((index2&0x0ff0000)<=0x0780000) {
+ drt |= (2<<22);
+ } else {
+ drt |= (2<<22);
+ }
+ /* Docs state to use 99 for all 167 Mhz */
+ drt |= (0x099<<24);
+ }
+ else if(value <= 0x75) { /* 133 Mhz */
+ drt |= ((index&3)<<2); /* set CAS latency */
+ if((index&0x0ff00)<=0x03c00) {
+ drt |= (1<<8); /* Trp RAS Precharg */
+ } else {
+ drt |= (2<<8); /* Trp RAS Precharg */
+ }
+
+ /* Trcd RAS to CAS delay */
+ if((index2&0x0ff)<=0x03c) {
+ drt |= (0<<10);
+ } else {
+ drt |= (1<<10);
+ }
+
+ /* Tdal Write auto precharge recovery delay */
+ drt |= (1<<12);
+
+ /* Trc TRS min */
+ drt |= (2<<14); /* spd 41, but only one choice */
+
+ drt |= (1<<16); /* Twr not defined for DDR docs say 1 */
+
+ /* Trrd Row Delay */
+ if((index&0x0ff0000)<=0x01e0000) {
+ drt |= (0<<20);
+ } else if((index&0x0ff0000)<=0x03c0000) {
+ drt |= (1<<20);
+ } else {
+ drt |= (2<<20);
+ }
+
+ /* Trfc Auto refresh cycle time */
+ if((index2&0x0ff0000)<=0x04b0000) {
+ drt |= (0<<22);
+ } else if((index2&0x0ff0000)<=0x0780000) {
+ drt |= (2<<22);
+ } else {
+ drt |= (2<<22);
+ }
+
+ /* Based on CAS latency */
+ if(index&7)
+ drt |= (0x099<<24);
+ else
+ drt |= (0x055<<24);
+
+ }
+ else {
+ die("Invalid SPD 9 bus speed.\r\n");
+ }
+
+ /* 0x78 DRT */
+ pci_write_config32(ctrl->f0, DRT, drt);
+
+ return(cas_latency);
+}
+
+static int spd_set_dram_controller_mode(const struct mem_controller *ctrl,
+ long dimm_mask)
+{
+ int value;
+ int drc;
+ int cnt;
+ msr_t msr;
+ u8 rate = 62;
+ static const u8 spd_rates[6] = {15,3,7,7,62,62};
+ static const u8 drc_rates[5] = {0,15,7,62,3};
+ static const u8 fsb_conversion[8] = {0,1,3,2,3,0,3,3};
+
+ /* 0x7c DRC */
+ drc = pci_read_config32(ctrl->f0, DRC);
+ for(cnt=0; cnt < 4; cnt++) {
+ if (!(dimm_mask & (1 << cnt))) {
+ continue;
+ }
+ value = spd_read_byte(ctrl->channel0[cnt], 11); /* ECC */
+ if (value != 2) die("ERROR - Non ECC memory dimm\r\n");
+
+ value = spd_read_byte(ctrl->channel0[cnt], 12); /*refresh rate*/
+ value &= 0x0f; /* clip self refresh bit */
+ if (value > 5) goto hw_err;
+ if (rate > spd_rates[value])
+ rate = spd_rates[value];
+
+ value = spd_read_byte(ctrl->channel0[cnt], 9); /* cycle time */
+ if (value > 0x75) goto hw_err;
+ }
+ drc |= (1 << 20); /* enable ECC */
+ for (cnt = 1; cnt < 5; cnt++)
+ if (drc_rates[cnt] == rate)
+ break;
+ if (cnt < 5) {
+ drc &= ~(7 << 8); /* clear the rate bits */
+ drc |= (cnt << 8);
+ }
+
+ drc |= (1 << 26); /* set the overlap bit - the factory BIOS does */
+ drc |= (1 << 27); /* set DED retry enable - the factory BIOS does */
+ drc |= (1 << 7);
+ drc &= ~(1 << 5); /* enable ODT */
+ drc |= (1 << 4); /* independent clocks */
+
+ /* set front side bus speed */
+ msr = rdmsr(0xcd); /* returns 0 on Pentium M 90nm */
+ value = msr.lo & 0x07;
+ drc &= ~(3 << 2);
+ drc |= (fsb_conversion[value] << 2);
+
+ /* set dram type to ddr2 */
+ drc &= ~(3 << 0);
+ drc |= (2 << 0);
+
+ goto out;
+
+ val_err:
+ die("Bad SPD value\r\n");
+ /* If an hw_error occurs report that I have no memory */
+ hw_err:
+ drc = 0;
+ out:
+ return drc;
+}
+
+static void sdram_set_spd_registers(const struct mem_controller *ctrl)
+{
+ long dimm_mask;
+
+ /* Test if we can read the spd and if ram is ddr or ddr2 */
+ dimm_mask = spd_detect_dimms(ctrl);
+ if (!(dimm_mask & ((1 << DIMM_SOCKETS) - 1))) {
+ print_err("No memory for this cpu\r\n");
+ return;
+ }
+ return;
+}
+
+static void do_delay(void)
+{
+ int i;
+ u8 b;
+ for(i=0;i<16;i++)
+ b=inb(0x80);
+}
+
+#define TIMEOUT_LOOPS 300000
+
+#define DCALCSR 0x100
+#define DCALADDR 0x104
+#define DCALDATA 0x108
+
+static void set_on_dimm_termination_enable(const struct mem_controller *ctrl)
+{
+ u8 c1,c2;
+ u32 dimm,i;
+ u32 data32;
+ u32 t4;
+
+ /* Set up northbridge values */
+ /* ODT enable */
+ pci_write_config32(ctrl->f0, SDRC, 0x30000000);
+ /* Figure out which slots are Empty, Single, or Double sided */
+ for(i=0,t4=0,c2=0;i<8;i+=2) {
+ c1 = pci_read_config8(ctrl->f0, DRB+i);
+ if(c1 == c2) continue;
+ c2 = pci_read_config8(ctrl->f0, DRB+1+i);
+ if(c1 == c2)
+ t4 |= (1 << (i*4));
+ else
+ t4 |= (2 << (i*4));
+ }
+ for(i=0;i<1;i++) {
+ if((t4&0x0f) == 1) {
+ if( ((t4>>8)&0x0f) == 0 ) {
+ data32 = 0x00000010; /* EEES */
+ break;
+ }
+ if ( ((t4>>16)&0x0f) == 0 ) {
+ data32 = 0x00003132; /* EESS */
+ break;
+ }
+ if ( ((t4>>24)&0x0f) == 0 ) {
+ data32 = 0x00335566; /* ESSS */
+ break;
+ }
+ data32 = 0x77bbddee; /* SSSS */
+ break;
+ }
+ if((t4&0x0f) == 2) {
+ if( ((t4>>8)&0x0f) == 0 ) {
+ data32 = 0x00003132; /* EEED */
+ break;
+ }
+ if ( ((t4>>8)&0x0f) == 2 ) {
+ data32 = 0xb373ecdc; /* EEDD */
+ break;
+ }
+ if ( ((t4>>16)&0x0f) == 0 ) {
+ data32 = 0x00b3a898; /* EESD */
+ break;
+ }
+ data32 = 0x777becdc; /* ESSD */
+ break;
+ }
+ die("Error - First dimm slot empty\r\n");
+ }
+
+ print_debug("ODT Value = ");
+ print_debug_hex32(data32);
+ print_debug("\r\n");
+
+ pci_write_config32(ctrl->f0, DDR2ODTC, data32);
+
+ for(dimm=0;dimm<8;dimm+=2) {
+
+ write32(MCBAR+DCALADDR, 0x0b840001);
+ write32(MCBAR+DCALCSR, 0x81000003 | (dimm << 20));
+
+ for(i=0;i<1001;i++) {
+ data32 = read32(MCBAR+DCALCSR);
+ if(!(data32 & (1<<31)))
+ break;
+ }
+ }
+}
+static void set_receive_enable(const struct mem_controller *ctrl)
+{
+ u32 i;
+ u32 cnt;
+ u32 recena=0;
+ u32 recenb=0;
+
+ {
+ u32 dimm;
+ u32 edge;
+ int32_t data32;
+ u32 data32_dram;
+ u32 dcal_data32_0;
+ u32 dcal_data32_1;
+ u32 dcal_data32_2;
+ u32 dcal_data32_3;
+ u32 work32l;
+ u32 work32h;
+ u32 data32r;
+ int32_t recen;
+ for(dimm=0;dimm<8;dimm+=1) {
+
+ if(!(dimm&1)) {
+ write32(MCBAR+DCALDATA+(17*4), 0x04020000);
+ write32(MCBAR+DCALCSR, 0x81800004 | (dimm << 20));
+
+ for(i=0;i<1001;i++) {
+ data32 = read32(MCBAR+DCALCSR);
+ if(!(data32 & (1<<31)))
+ break;
+ }
+ if(i>=1000)
+ continue;
+
+ dcal_data32_0 = read32(MCBAR+DCALDATA + 0);
+ dcal_data32_1 = read32(MCBAR+DCALDATA + 4);
+ dcal_data32_2 = read32(MCBAR+DCALDATA + 8);
+ dcal_data32_3 = read32(MCBAR+DCALDATA + 12);
+ }
+ else {
+ dcal_data32_0 = read32(MCBAR+DCALDATA + 16);
+ dcal_data32_1 = read32(MCBAR+DCALDATA + 20);
+ dcal_data32_2 = read32(MCBAR+DCALDATA + 24);
+ dcal_data32_3 = read32(MCBAR+DCALDATA + 28);
+ }
+
+ /* check if bank is installed */
+ if((dcal_data32_0 == 0) && (dcal_data32_2 == 0))
+ continue;
+ /* Calculate the timing value */
+ {
+ u32 bit;
+ for(i=0,edge=0,bit=63,cnt=31,data32r=0,
+ work32l=dcal_data32_1,work32h=dcal_data32_3;
+ (i<4) && bit; i++) {
+ for(;;bit--,cnt--) {
+ if(work32l & (1<<cnt))
+ break;
+ if(!cnt) {
+ work32l = dcal_data32_0;
+ work32h = dcal_data32_2;
+ cnt = 32;
+ }
+ if(!bit) break;
+ }
+ for(;;bit--,cnt--) {
+ if(!(work32l & (1<<cnt)))
+ break;
+ if(!cnt) {
+ work32l = dcal_data32_0;
+ work32h = dcal_data32_2;
+ cnt = 32;
+ }
+ if(!bit) break;
+ }
+ if(!bit) {
+ break;
+ }
+ data32 = ((bit%8) << 1);
+ if(work32h & (1<<cnt))
+ data32 += 1;
+ if(data32 < 4) {
+ if(!edge) {
+ edge = 1;
+ }
+ else {
+ if(edge != 1) {
+ data32 = 0x0f;
+ }
+ }
+ }
+ if(data32 > 12) {
+ if(!edge) {
+ edge = 2;
+ }
+ else {
+ if(edge != 2) {
+ data32 = 0x00;
+ }
+ }
+ }
+ data32r += data32;
+ }
+ }
+ work32l = dcal_data32_0;
+ work32h = dcal_data32_2;
+ recen = data32r;
+ recen += 3;
+ recen = recen>>2;
+ for(cnt=5;cnt<24;) {
+ for(;;cnt++)
+ if(!(work32l & (1<<cnt)))
+ break;
+ for(;;cnt++) {
+ if(work32l & (1<<cnt))
+ break;
+ }
+ data32 = (((cnt-1)%8)<<1);
+ if(work32h & (1<<(cnt-1))) {
+ data32++;
+ }
+ /* test for frame edge cross overs */
+ if((edge == 1) && (data32 > 12) &&
+ (((recen+16)-data32) < 3)) {
+ data32 = 0;
+ cnt += 2;
+ }
+ if((edge == 2) && (data32 < 4) &&
+ ((recen - data32) > 12)) {
+ data32 = 0x0f;
+ cnt -= 2;
+ }
+ if(((recen+3) >= data32) && ((recen-3) <= data32))
+ break;
+ }
+ cnt--;
+ cnt /= 8;
+ cnt--;
+ if(recen&1)
+ recen+=2;
+ recen >>= 1;
+ recen += (cnt*8);
+ recen+=2; /* this is not in the spec, but matches
+ the factory output, and has less failure */
+ recen <<= (dimm/2) * 8;
+ if(!(dimm&1)) {
+ recena |= recen;
+ }
+ else {
+ recenb |= recen;
+ }
+ }
+ }
+ /* Check for Eratta problem */
+ for(i=cnt=0;i<32;i+=8) {
+ if (((recena>>i)&0x0f)>7) {
+ cnt+= 0x101;
+ }
+ else {
+ if((recena>>i)&0x0f) {
+ cnt++;
+ }
+ }
+ }
+ if(cnt&0x0f00) {
+ cnt = (cnt&0x0f) - (cnt>>16);
+ if(cnt>1) {
+ for(i=0;i<32;i+=8) {
+ if(((recena>>i)&0x0f)>7) {
+ recena &= ~(0x0f<<i);
+ recena |= (7<<i);
+ }
+ }
+ }
+ else {
+ for(i=0;i<32;i+=8) {
+ if(((recena>>i)&0x0f)<8) {
+ recena &= ~(0x0f<<i);
+ recena |= (8<<i);
+ }
+ }
+ }
+ }
+ for(i=cnt=0;i<32;i+=8) {
+ if (((recenb>>i)&0x0f)>7) {
+ cnt+= 0x101;
+ }
+ else {
+ if((recenb>>i)&0x0f) {
+ cnt++;
+ }
+ }
+ }
+ if(cnt & 0x0f00) {
+ cnt = (cnt&0x0f) - (cnt>>16);
+ if(cnt>1) {
+ for(i=0;i<32;i+=8) {
+ if(((recenb>>i)&0x0f)>7) {
+ recenb &= ~(0x0f<<i);
+ recenb |= (7<<i);
+ }
+ }
+ }
+ else {
+ for(i=0;i<32;i+=8) {
+ if(((recenb>>8)&0x0f)<8) {
+ recenb &= ~(0x0f<<i);
+ recenb |= (8<<i);
+ }
+ }
+ }
+ }
+
+ print_debug("Receive enable A = ");
+ print_debug_hex32(recena);
+ print_debug(", Receive enable B = ");
+ print_debug_hex32(recenb);
+ print_debug("\r\n");
+
+ /* clear out the calibration area */
+ write32(MCBAR+DCALDATA+(16*4), 0x00000000);
+ write32(MCBAR+DCALDATA+(17*4), 0x00000000);
+ write32(MCBAR+DCALDATA+(18*4), 0x00000000);
+ write32(MCBAR+DCALDATA+(19*4), 0x00000000);
+
+ /* No command */
+ write32(MCBAR+DCALCSR, 0x0000000f);
+
+ write32(MCBAR+0x150, recena);
+ write32(MCBAR+0x154, recenb);
+}
+
+
+static void sdram_enable(int controllers, const struct mem_controller *ctrl)
+{
+ int i;
+ int cs;
+ int cnt;
+ int cas_latency;
+ long mask;
+ u32 drc;
+ u32 data32;
+ u32 mode_reg;
+ u32 *iptr;
+ volatile u32 *iptrv;
+ msr_t msr;
+ u32 scratch;
+ u8 byte;
+ u16 data16;
+ static const struct {
+ u32 clkgr[4];
+ } gearing [] = {
+ /* FSB 100 */
+ {{ 0x00000010, 0x00000000, 0x00000002, 0x00000001}},
+ /* FSB 133 */
+ {{ 0x00000120, 0x00000000, 0x00000032, 0x00000010}},
+ /* FSB 167 */
+ {{ 0x00154320, 0x00000000, 0x00065432, 0x00010000}},
+ /* N/A */
+ {{ 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff}},
+ };
+
+ static const u32 dqs_data[] = {
+ 0xffffffff, 0xffffffff, 0x000000ff,
+ 0xffffffff, 0xffffffff, 0x000000ff,
+ 0xffffffff, 0xffffffff, 0x000000ff,
+ 0xffffffff, 0xffffffff, 0x000000ff,
+ 0xffffffff, 0xffffffff, 0x000000ff,
+ 0xffffffff, 0xffffffff, 0x000000ff,
+ 0xffffffff, 0xffffffff, 0x000000ff,
+ 0xffffffff, 0xffffffff, 0x000000ff};
+
+ mask = spd_detect_dimms(ctrl);
+ print_debug("Starting SDRAM Enable\r\n");
+
+ /* 0x80 */
+#ifdef DIMM_MAP_LOGICAL
+ pci_write_config32(ctrl->f0, DRM,
+ 0x00410000 | DIMM_MAP_LOGICAL);
+#else
+ pci_write_config32(ctrl->f0, DRM, 0x00411248);
+#endif
+ /* set dram type and Front Side Bus freq. */
+ drc = spd_set_dram_controller_mode(ctrl, mask);
+ if( drc == 0) {
+ die("Error calculating DRC\r\n");
+ }
+ data32 = drc & ~(3 << 20); /* clear ECC mode */
+ data32 = data32 & ~(7 << 8); /* clear refresh rates */
+ data32 = data32 | (1 << 5); /* temp turn off ODT */
+ /* Set gearing, then dram controller mode */
+ /* drc bits 3:2 = FSB speed */
+ for(iptr = gearing[(drc>>2)&3].clkgr,cnt=0;cnt<4;cnt++) {
+ pci_write_config32(ctrl->f0, 0xa0+(cnt*4), iptr[cnt]);
+ }
+ /* 0x7c DRC */
+ pci_write_config32(ctrl->f0, DRC, data32);
+
+ /* turn the clocks on */
+ /* 0x8c CKDIS */
+ pci_write_config16(ctrl->f0, CKDIS, 0x0000);
+
+ /* 0x9a DDRCSR Take subsystem out of idle */
+ data16 = pci_read_config16(ctrl->f0, DDRCSR);
+ data16 &= ~(7 << 12);
+ data16 |= (1 << 12);
+ pci_write_config16(ctrl->f0, DDRCSR, data16);
+
+ /* program row size DRB */
+ spd_set_ram_size(ctrl, mask);
+
+ /* program page size DRA */
+ spd_set_row_attributes(ctrl, mask);
+
+ /* program DRT timing values */
+ cas_latency = spd_set_drt_attributes(ctrl, mask, drc);
+
+ for(i=0;i<8;i+=2) { /* loop through each dimm to test */
+ print_debug("DIMM ");
+ print_debug_hex8(i);
+ print_debug("\r\n");
+ /* Apply NOP */
+ do_delay();
+
+ write32(MCBAR+DCALCSR, (0x01000000 | (i<<20)));
+ write32(MCBAR+DCALCSR, (0x81000000 | (i<<20)));
+
+ data32 = read32(MCBAR+DCALCSR);
+ while(data32 & 0x80000000)
+ data32 = read32(MCBAR+DCALCSR);
+ }
+
+ /* Apply NOP */
+ do_delay();
+
+ for(cs=0;cs<8;cs+=2) {
+ write32(MCBAR + DCALCSR, (0x81000000 | (cs<<20)));
+ data32 = read32(MCBAR+DCALCSR);
+ while(data32 & 0x80000000)
+ data32 = read32(MCBAR+DCALCSR);
+ }
+
+ /* Precharg all banks */
+ do_delay();
+ for(cs=0;cs<8;cs+=2) {
+ write32(MCBAR+DCALADDR, 0x04000000);
+ write32(MCBAR+DCALCSR, (0x81000002 | (cs<<20)));
+ data32 = read32(MCBAR+DCALCSR);
+ while(data32 & 0x80000000)
+ data32 = read32(MCBAR+DCALCSR);
+ }
+
+ /* EMRS dll's enabled */
+ do_delay();
+ for(cs=0;cs<8;cs+=2) {
+ /* fixme hard code AL additive latency */
+ write32(MCBAR+DCALADDR, 0x0b940001);
+ write32(MCBAR+DCALCSR, (0x81000003 | (cs<<20)));
+ data32 = read32(MCBAR+DCALCSR);
+ while(data32 & 0x80000000)
+ data32 = read32(MCBAR+DCALCSR);
+ }
+ /* MRS reset dll's */
+ do_delay();
+ if(cas_latency == 30)
+ mode_reg = 0x053a0000;
+ else
+ mode_reg = 0x054a0000;
+ for(cs=0;cs<8;cs+=2) {
+ write32(MCBAR+DCALADDR, mode_reg);
+ write32(MCBAR+DCALCSR, (0x81000003 | (cs<<20)));
+ data32 = read32(MCBAR+DCALCSR);
+ while(data32 & 0x80000000)
+ data32 = read32(MCBAR+DCALCSR);
+ }
+
+ /* Precharg all banks */
+ do_delay();
+ do_delay();
+ do_delay();
+ for(cs=0;cs<8;cs+=2) {
+ write32(MCBAR+DCALADDR, 0x04000000);
+ write32(MCBAR+DCALCSR, (0x81000002 | (cs<<20)));
+ data32 = read32(MCBAR+DCALCSR);
+ while(data32 & 0x80000000)
+ data32 = read32(MCBAR+DCALCSR);
+ }
+
+ /* Do 2 refreshes */
+ do_delay();
+ for(cs=0;cs<8;cs+=2) {
+ write32(MCBAR+DCALCSR, (0x81000001 | (cs<<20)));
+ data32 = read32(MCBAR+DCALCSR);
+ while(data32 & 0x80000000)
+ data32 = read32(MCBAR+DCALCSR);
+ }
+ do_delay();
+ for(cs=0;cs<8;cs+=2) {
+ write32(MCBAR+DCALCSR, (0x81000001 | (cs<<20)));
+ data32 = read32(MCBAR+DCALCSR);
+ while(data32 & 0x80000000)
+ data32 = read32(MCBAR+DCALCSR);
+ }
+ do_delay();
+ /* for good luck do 6 more */
+ for(cs=0;cs<8;cs+=2) {
+ write32(MCBAR+DCALCSR, (0x81000001 | (cs<<20)));
+ }
+ do_delay();
+ for(cs=0;cs<8;cs+=2) {
+ write32(MCBAR+DCALCSR, (0x81000001 | (cs<<20)));
+ }
+ do_delay();
+ for(cs=0;cs<8;cs+=2) {
+ write32(MCBAR+DCALCSR, (0x81000001 | (cs<<20)));
+ }
+ do_delay();
+ for(cs=0;cs<8;cs+=2) {
+ write32(MCBAR+DCALCSR, (0x81000001 | (cs<<20)));
+ }
+ do_delay();
+ for(cs=0;cs<8;cs+=2) {
+ write32(MCBAR+DCALCSR, (0x81000001 | (cs<<20)));
+ }
+ do_delay();
+ for(cs=0;cs<8;cs+=2) {
+ write32(MCBAR+DCALCSR, (0x81000001 | (cs<<20)));
+ }
+ do_delay();
+ /* MRS reset dll's normal */
+ do_delay();
+ for(cs=0;cs<8;cs+=2) {
+ write32(MCBAR+DCALADDR, (mode_reg & ~(1<<24)));
+ write32(MCBAR+DCALCSR, (0x81000003 | (cs<<20)));
+ data32 = read32(MCBAR+DCALCSR);
+ while(data32 & 0x80000000)
+ data32 = read32(MCBAR+DCALCSR);
+ }
+
+ /* Do only if DDR2 EMRS dll's enabled */
+ do_delay();
+ for(cs=0;cs<8;cs+=2) {
+ write32(MCBAR+DCALADDR, (0x0b940001));
+ write32(MCBAR+DCALCSR, (0x81000003 | (cs<<20)));
+ data32 = read32(MCBAR+DCALCSR);
+ while(data32 & 0x80000000)
+ data32 = read32(MCBAR+DCALCSR);
+ }
+
+ do_delay();
+ /* No command */
+ write32(MCBAR+DCALCSR, 0x0000000f);
+
+ /* enable on dimm termination */
+ set_on_dimm_termination_enable(ctrl);
+
+ /* receive enable calibration */
+ set_receive_enable(ctrl);
+
+ /* DQS */
+ pci_write_config32(ctrl->f0, 0x94, 0x3904aa00);
+ for(i = 0, cnt = (MCBAR+0x200); i < 24; i++, cnt+=4) {
+ write32(cnt, dqs_data[i]);
+ }
+ pci_write_config32(ctrl->f0, 0x94, 0x3900aa00);
+
+ /* Enable refresh */
+ /* 0x7c DRC */
+ data32 = drc & ~(3 << 20); /* clear ECC mode */
+ pci_write_config32(ctrl->f0, DRC, data32);
+ write32(MCBAR+DCALCSR, 0x0008000f);
+
+ /* clear memory and init ECC */
+ print_debug("Clearing memory\r\n");
+ for(i=0;i<64;i+=4) {
+ write32(MCBAR+DCALDATA+i, 0x00000000);
+ }
+
+ for(cs=0;cs<8;cs+=2) {
+ write32(MCBAR+DCALCSR, (0x810831d8 | (cs<<20)));
+ data32 = read32(MCBAR+DCALCSR);
+ while(data32 & 0x80000000)
+ data32 = read32(MCBAR+DCALCSR);
+ }
+
+ /* Bring memory subsystem on line */
+ data32 = pci_read_config32(ctrl->f0, 0x98);
+ data32 |= (1 << 31);
+ pci_write_config32(ctrl->f0, 0x98, data32);
+ /* wait for completion */
+ print_debug("Waiting for mem complete\r\n");
+ while(1) {
+ data32 = pci_read_config32(ctrl->f0, 0x98);
+ if( (data32 & (1<<31)) == 0)
+ break;
+ }
+ print_debug("Done\r\n");
+
+ /* Set initialization complete */
+ /* 0x7c DRC */
+ drc |= (1 << 29);
+ data32 = drc & ~(3 << 20); /* clear ECC mode */
+ pci_write_config32(ctrl->f0, DRC, data32);
+
+ /* Set the ecc mode */
+ pci_write_config32(ctrl->f0, DRC, drc);
+
+ /* Enable memory scrubbing */
+ /* 0x52 MCHSCRB */
+ data16 = pci_read_config16(ctrl->f0, MCHSCRB);
+ data16 &= ~0x0f;
+ data16 |= ((2 << 2) | (2 << 0));
+ pci_write_config16(ctrl->f0, MCHSCRB, data16);
+
+ /* The memory is now setup, use it */
+ cache_lbmem(MTRR_TYPE_WRBACK);
+}
projects / coreboot.git / commitdiff