Re-worked devicetree.cb for DL145 G1

After a lot of experimentation this commit improves some hardware
features that were not recognized or incorrectly configured before.
The only thing not tested is SCSI-option board (I dont have one).
Misleading errors in comments have been corrected.
(Note BTW that the DL145 G1 mainboard is identical to AMD Serenade
which was supported in early versions of coreboot but was dropped
for some reason.)

Signed-off-by: Oskar Enoksson <enok@lysator.liu.se>
Change-Id: Ibbd97fafad22196b1e18d0b257731490339f113e
Reviewed-on: http://review.coreboot.org/237
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>

diff --git a/src/mainboard/hp/dl145_g1/devicetree.cb b/src/mainboard/hp/dl145_g1/devicetree.cb
index 3237723a5312399b136c97b92fa1ffe69ed2a1db..bd67f23d54cd00d55d95c78637552dbaef35f685 100644 (file)
--- a/src/mainboard/hp/dl145_g1/devicetree.cb
+++ b/src/mainboard/hp/dl145_g1/devicetree.cb
@@ -12,45 +12,46 @@ chip northbridge/amd/amdk8/root_complex
       device pci 18.0 on     # link 2
         chip southbridge/amd/amd8131
           # the on/off keyword is mandatory
-          device pci 0.0 on end
-          device pci 0.1 on end
-          device pci 1.0 on end
-          device pci 1.1 on end
-          device pci 2.0 on end
-          device pci 2.1 on end
-          device pci 3.0 off end
+          device pci 0.0 on # PCIX Bridge A
+            # PCI-X expansion slot cards auto-detected here
+          end
+          device pci 0.1 on end  # IOAPIC A
+          device pci 1.0 on      # PCIX Bridge B
+            # On-board BCM5704 dual port ethernet chip auto-detected here
+            # Optional SCSI board also (?)
+         end
+          device pci 1.1 on end  # IOAPIC B
+          device pci 2.0 off end
         end
         chip southbridge/amd/amd8111
-          # this "device pci 0.0" is the parent the next one
+          # this "device pci 0.0" is the parent of the next one
           # PCI bridge
           device pci 0.0 on
-            device pci 0.0 on end # LPC
-            device pci 0.1 on end # IDE
-            device pci 0.2 on end # SMbus
-            device pci 0.3 on end # ACPI
-            device pci 1.0 off end
-            #device pci 5.0 on end # SiI
-            #device pci 6.0 on end
+            device pci 0.0 on end  # OHCI-based USB controller 0
+            device pci 0.1 on end  # OCHI-based USB controller 1
+            device pci 0.2 on end  # EHCI-based USB2 controller
+            device pci 1.0 off end # LAN Ethernet controller
+            #device pci 4.0 on end # VGA PCI-card (auto detected)
           end
-          device pci 1.0 on
+          device pci 1.0 on # LPC Bridge
             chip superio/winbond/w83627hf
               device pnp 2e.0 off # Floppy
-                io  0x60 = 0x3f0
-                irq 0x70 = 6
-                drq 0x74 = 2
+                #io  0x60 = 0x3f0
+                #irq 0x70 = 6
+                #drq 0x74 = 2
               end
               device pnp 2e.1 off # Parallel Port
-                io  0x60 = 0x378
-                irq 0x70 = 7
-                drq 0x74 = 1
+                #io  0x60 = 0x378
+                #irq 0x70 = 7
+                #drq 0x74 = 1
               end
               device pnp 2e.2 on  # Com1
                 io  0x60 = 0x3f8
                 irq 0x70 = 4
               end
-              device pnp 2e.3 on  # Com2
-                io  0x60 = 0x2f8
-                irq 0x70 = 3
+              device pnp 2e.3 off # Com2
+                #io  0x60 = 0x2f8
+                #irq 0x70 = 3
               end
               device pnp 2e.5 on  # Keyboard
                 io  0x60 = 0x60
@@ -60,12 +61,12 @@ chip northbridge/amd/amdk8/root_complex
               end
               device pnp 2e.6 off # CIR
               end
-              device pnp 2e.7 off # GAM_MIDI_GIPO1
-                io  0x60 = 0x201
-                io  0x62 = 0x330
-                irq 0x70 = 9
+              device pnp 2e.7 off  # GAM_MIDI_GPIO1
+                #io  0x60 = 0x201
+                #io  0x62 = 0x330
+                #irq 0x70 = 9
               end
-              device pnp 2e.8 on  # GPIO2
+              device pnp 2e.8 on  # GPIO2 (watchdog timer)
               end
               device pnp 2e.9 on  # GPIO3
               end
@@ -77,28 +78,18 @@ chip northbridge/amd/amdk8/root_complex
               end
             end
           end
-          device pci 1.1 on end
-          device pci 1.2 on end
-          device pci 1.3 on
-            chip drivers/generic/generic # ???
-              device i2c 08 on end
+          device pci 1.1 on end # EIDE controller
+          device pci 1.2 on 
+            chip drivers/generic/generic
+              device i2c 8 on end # Some HW-monitor/sensor?
             end
-            chip drivers/i2c/i2cmux # pca9556 smbus mux
-              device i2c 18 on #0 pca9516 1
-                # I don't know what 30-33 are for,
-                # they seem to have something to do with the DIMM's
-                chip drivers/generic/generic # ???
-                  device i2c 30 on end
-                end
-                chip drivers/generic/generic # ???
-                  device i2c 31 on end
-                end
-                chip drivers/generic/generic # ???
-                  device i2c 32 on end
-                end
-                chip drivers/generic/generic # ???
-                  device i2c 33 on end
-                end
+          end
+          device pci 1.2 on 
+            chip drivers/i2c/i2cmux # Multplexed DIMM spd eeproms.
+              device i2c 18 on #0 pca9516 (?)
+                # Some dimms also listen to address 30-33
+               # It's some kind of write-protect function
+               # The 50-53 addresses are the interesting ones.
                 chip drivers/generic/generic #dimm H0-0
                   device i2c 50 on end
                 end
@@ -112,19 +103,7 @@ chip northbridge/amd/amdk8/root_complex
                   device i2c 53 on end
                 end
               end
-              device i2c 18 on #1 pca9516 2
-                chip drivers/generic/generic # ???
-                  device i2c 30 on end
-                end
-                chip drivers/generic/generic # ???
-                  device i2c 31 on end
-                end
-                chip drivers/generic/generic # ???
-                  device i2c 32 on end
-                end
-                chip drivers/generic/generic # ???
-                  device i2c 33 on end
-                end
+              device i2c 18 on #1 pca9516 (?)
                 chip drivers/generic/generic #dimm H1-0
                   device i2c 50 on end
                 end
@@ -139,13 +118,17 @@ chip northbridge/amd/amdk8/root_complex
                 end
               end
             end
-            chip drivers/generic/generic # ???
-              device i2c 69 on end
+          end
+          device pci 1.2 on 
+            chip drivers/generic/generic
+              device i2c 69 on end  # Texas Instruments cdc960 clock synthesizer
             end
-          end # acpi
-          device pci 1.4 off end
+         end # SMBus 2.0 controller
+          device pci 1.3 on     # System management registers (ACPI)
+          end # System management
+          #device pci 1.4 off end
           device pci 1.5 off end # AC97 Audio
-          device pci 1.6 off end # MC97 Modem
+          device pci 1.6 off end # AC97 Modem
           register "ide0_enable" = "1"
           register "ide1_enable" = "1"
         end