--- /dev/null
+/* coherent hypertransport initialization for AMD64
+ *
+ * written by Stefan Reinauer <stepan@openbios.org>
+ * (c) 2003-2004 by SuSE Linux AG
+ *
+ * (c) 2004 Tyan Computer
+ * 2004.12 yhlu added support to create routing table dynamically.
+ * it also support 8 ways too. (8 ways ladder or 8 ways crossbar)
+ *
+ * This code is licensed under GPL.
+ */
+
+/*
+ * This algorithm assumes a grid configuration as follows:
+ *
+ * nodes : 1 2 4 6 8
+ * org. : 1x1 2x1 2x2 2x3 2x4
+ Ladder:
+ CPU7-------------CPU6
+ | |
+ | |
+ | |
+ | |
+ | |
+ | |
+ CPU5-------------CPU4
+ | |
+ | |
+ | |
+ | |
+ | |
+ | |
+ CPU3-------------CPU2
+ | |
+ | |
+ | |
+ | |
+ | |
+ | |
+ CPU1-------------CPU0
+ CROSS_BAR_47_56:
+ CPU7-------------CPU6
+ | \____ ___/ |
+ | \ / |
+ | \/ |
+ | /\ |
+ | / \ |
+ | ____/ \___ |
+ CPU5 CPU4
+ | |
+ | |
+ | |
+ | |
+ | |
+ | |
+ CPU3-------------CPU2
+ | |
+ | |
+ | |
+ | |
+ | |
+ | |
+ CPU1-------------CPU0
+ */
+
+#include <device/pci_def.h>
+#include <device/pci_ids.h>
+#include <device/hypertransport_def.h>
+#include "arch/romcc_io.h"
+
+#include "amdk8.h"
+
+#define enable_bsp_routing() enable_routing(0)
+
+#define NODE_HT(x) PCI_DEV(0,24+x,0)
+#define NODE_MP(x) PCI_DEV(0,24+x,1)
+#define NODE_MC(x) PCI_DEV(0,24+x,3)
+
+#define DEFAULT 0x00010101 /* default row entry */
+
+typedef uint8_t u8;
+typedef uint32_t u32;
+
+#ifndef CROSS_BAR_47_56
+ #define CROSS_BAR_47_56 0
+#endif
+
+#ifndef TRY_HIGH_FIRST
+ #define TRY_HIGH_FIRST 0
+#endif
+
+#ifndef K8_HT_FREQ_1G_SUPPORT
+ #define K8_HT_FREQ_1G_SUPPORT 0
+#endif
+
+#ifndef K8_HT_CHECK_PENDING_LINK
+ #if CONFIG_MAX_PHYSICAL_CPUS >= 4
+ #define K8_HT_CHECK_PENDING_LINK 1
+ #else
+ #define K8_HT_CHECK_PENDING_LINK 0
+ #endif
+#endif
+
+#ifndef CONFIG_MAX_PHYSICAL_CPUS_4_BUT_MORE_INSTALLED
+ #define CONFIG_MAX_PHYSICAL_CPUS_4_BUT_MORE_INSTALLED 0
+#endif
+
+#ifndef ENABLE_APIC_EXT_ID
+ #define ENABLE_APIC_EXT_ID 0
+#endif
+
+
+static inline void print_linkn (const char *strval, uint8_t byteval)
+{
+#if 1
+#if CONFIG_USE_INIT
+ printk_debug("%s%02x\r\n", strval, byteval);
+#else
+ print_debug(strval); print_debug_hex8(byteval); print_debug("\r\n");
+#endif
+#endif
+}
+
+static void disable_probes(void)
+{
+ /* disable read/write/fill probes for uniprocessor setup
+ * they don't make sense if only one cpu is available
+ */
+
+ /* Hypetransport Transaction Control Register
+ * F0:0x68
+ * [ 0: 0] Disable read byte probe
+ * 0 = Probes issues
+ * 1 = Probes not issued
+ * [ 1: 1] Disable Read Doubleword probe
+ * 0 = Probes issued
+ * 1 = Probes not issued
+ * [ 2: 2] Disable write byte probes
+ * 0 = Probes issued
+ * 1 = Probes not issued
+ * [ 3: 3] Disable Write Doubleword Probes
+ * 0 = Probes issued
+ * 1 = Probes not issued.
+ * [10:10] Disable Fill Probe
+ * 0 = Probes issued for cache fills
+ * 1 = Probes not issued for cache fills.
+ */
+
+ u32 val;
+
+ print_spew("Disabling read/write/fill probes for UP... ");
+
+ val=pci_read_config32(NODE_HT(0), HT_TRANSACTION_CONTROL);
+ val |= HTTC_DIS_FILL_P | HTTC_DIS_RMT_MEM_C | HTTC_DIS_P_MEM_C |
+ HTTC_DIS_MTS | HTTC_DIS_WR_DW_P | HTTC_DIS_WR_B_P |
+ HTTC_DIS_RD_DW_P | HTTC_DIS_RD_B_P;
+ pci_write_config32(NODE_HT(0), HT_TRANSACTION_CONTROL, val);
+
+ print_spew("done.\r\n");
+
+}
+
+static void enable_apic_ext_id(u8 node)
+{
+#if ENABLE_APIC_EXT_ID==1
+#warning "FIXME Is the right place to enable apic ext id here?"
+
+ u32 val;
+
+ val = pci_read_config32(NODE_HT(node), 0x68);
+ val |= (HTTC_APIC_EXT_SPUR | HTTC_APIC_EXT_ID | HTTC_APIC_EXT_BRD_CST);
+ pci_write_config32(NODE_HT(node), 0x68, val);
+#endif
+}
+
+static void enable_routing(u8 node)
+{
+ u32 val;
+
+ /* HT Initialization Control Register
+ * F0:0x6C
+ * [ 0: 0] Routing Table Disable
+ * 0 = Packets are routed according to routing tables
+ * 1 = Packets are routed according to the default link field
+ * [ 1: 1] Request Disable (BSP should clear this)
+ * 0 = Request packets may be generated
+ * 1 = Request packets may not be generated.
+ * [ 3: 2] Default Link (Read-only)
+ * 00 = LDT0
+ * 01 = LDT1
+ * 10 = LDT2
+ * 11 = CPU on same node
+ * [ 4: 4] Cold Reset
+ * - Scratch bit cleared by a cold reset
+ * [ 5: 5] BIOS Reset Detect
+ * - Scratch bit cleared by a cold reset
+ * [ 6: 6] INIT Detect
+ * - Scratch bit cleared by a warm or cold reset not by an INIT
+ *
+ */
+
+ /* Enable routing table */
+ print_spew("Enabling routing table for node ");
+ print_spew_hex8(node);
+
+ val=pci_read_config32(NODE_HT(node), 0x6c);
+ val &= ~((1<<1)|(1<<0));
+ pci_write_config32(NODE_HT(node), 0x6c, val);
+
+ print_spew(" done.\r\n");
+}
+
+static void fill_row(u8 node, u8 row, u32 value)
+{
+ pci_write_config32(NODE_HT(node), 0x40+(row<<2), value);
+}
+
+#if CONFIG_MAX_PHYSICAL_CPUS > 1
+static u8 link_to_register(int ldt)
+{
+ /*
+ * [ 0: 3] Request Route
+ * [0] Route to this node
+ * [1] Route to Link 0
+ * [2] Route to Link 1
+ * [3] Route to Link 2
+ */
+
+ if (ldt&0x08) return 0x40;
+ if (ldt&0x04) return 0x20;
+ if (ldt&0x02) return 0x00;
+
+ /* we should never get here */
+ print_spew("Unknown Link\n");
+ return 0;
+}
+
+static u32 get_row(u8 node, u8 row)
+{
+ return pci_read_config32(NODE_HT(node), 0x40+(row<<2));
+}
+
+static int link_connection(u8 src, u8 dest)
+{
+ return get_row(src, dest) & 0x0f;
+}
+
+static void rename_temp_node(u8 node)
+{
+ uint32_t val;
+
+ print_spew("Renaming current temporary node to ");
+ print_spew_hex8(node);
+
+ val=pci_read_config32(NODE_HT(7), 0x60);
+ val &= (~7); /* clear low bits. */
+ val |= node; /* new node */
+ pci_write_config32(NODE_HT(7), 0x60, val);
+
+ print_spew(" done.\r\n");
+}
+
+static int verify_connection(u8 dest)
+{
+ /* See if we have a valid connection to dest */
+ u32 val;
+
+ /* Verify that the coherent hypertransport link is
+ * established and actually working by reading the
+ * remode node's vendor/device id
+ */
+ val = pci_read_config32(NODE_HT(dest),0);
+ if(val != 0x11001022)
+ return 0;
+
+ return 1;
+}
+
+static uint16_t read_freq_cap(device_t dev, uint8_t pos)
+{
+ /* Handle bugs in valid hypertransport frequency reporting */
+ uint16_t freq_cap;
+ uint32_t id;
+
+ freq_cap = pci_read_config16(dev, pos);
+ freq_cap &= ~(1 << HT_FREQ_VENDOR); /* Ignore Vendor HT frequencies */
+
+#if K8_HT_FREQ_1G_SUPPORT == 1
+ if (!is_cpu_pre_e0())
+ {
+ return freq_cap;
+ }
+#endif
+
+ id = pci_read_config32(dev, 0);
+
+ /* AMD K8 Unsupported 1Ghz? */
+ if (id == (PCI_VENDOR_ID_AMD | (0x1100 << 16))) {
+ freq_cap &= ~(1 << HT_FREQ_1000Mhz);
+ }
+
+ return freq_cap;
+}
+
+static int optimize_connection(device_t node1, uint8_t link1, device_t node2, uint8_t link2)
+{
+ static const uint8_t link_width_to_pow2[]= { 3, 4, 0, 5, 1, 2, 0, 0 };
+ static const uint8_t pow2_to_link_width[] = { 0x7, 4, 5, 0, 1, 3 };
+ uint16_t freq_cap1, freq_cap2;
+ uint8_t width_cap1, width_cap2, width, old_width, ln_width1, ln_width2;
+ uint8_t freq, old_freq;
+ int needs_reset;
+ /* Set link width and frequency */
+
+ /* Initially assume everything is already optimized and I don't need a reset */
+ needs_reset = 0;
+
+ /* Get the frequency capabilities */
+ freq_cap1 = read_freq_cap(node1, link1 + PCI_HT_CAP_HOST_FREQ_CAP);
+ freq_cap2 = read_freq_cap(node2, link2 + PCI_HT_CAP_HOST_FREQ_CAP);
+
+ /* Calculate the highest possible frequency */
+ freq = log2(freq_cap1 & freq_cap2);
+
+ /* See if I am changing the link freqency */
+ old_freq = pci_read_config8(node1, link1 + PCI_HT_CAP_HOST_FREQ);
+ old_freq &= 0x0f;
+ needs_reset |= old_freq != freq;
+ old_freq = pci_read_config8(node2, link2 + PCI_HT_CAP_HOST_FREQ);
+ old_freq &= 0x0f;
+ needs_reset |= old_freq != freq;
+
+ /* Set the Calulcated link frequency */
+ pci_write_config8(node1, link1 + PCI_HT_CAP_HOST_FREQ, freq);
+ pci_write_config8(node2, link2 + PCI_HT_CAP_HOST_FREQ, freq);
+
+ /* Get the width capabilities */
+ width_cap1 = pci_read_config8(node1, link1 + PCI_HT_CAP_HOST_WIDTH);
+ width_cap2 = pci_read_config8(node2, link2 + PCI_HT_CAP_HOST_WIDTH);
+
+ /* Calculate node1's input width */
+ ln_width1 = link_width_to_pow2[width_cap1 & 7];
+ ln_width2 = link_width_to_pow2[(width_cap2 >> 4) & 7];
+ if (ln_width1 > ln_width2) {
+ ln_width1 = ln_width2;
+ }
+ width = pow2_to_link_width[ln_width1];
+ /* Calculate node1's output width */
+ ln_width1 = link_width_to_pow2[(width_cap1 >> 4) & 7];
+ ln_width2 = link_width_to_pow2[width_cap2 & 7];
+ if (ln_width1 > ln_width2) {
+ ln_width1 = ln_width2;
+ }
+ width |= pow2_to_link_width[ln_width1] << 4;
+
+ /* See if I am changing node1's width */
+ old_width = pci_read_config8(node1, link1 + PCI_HT_CAP_HOST_WIDTH + 1);
+ old_width &= 0x77;
+ needs_reset |= old_width != width;
+
+ /* Set node1's widths */
+ pci_write_config8(node1, link1 + PCI_HT_CAP_HOST_WIDTH + 1, width);
+
+ // * Calculate node2's width */
+ width = ((width & 0x70) >> 4) | ((width & 0x7) << 4);
+
+ /* See if I am changing node2's width */
+ old_width = pci_read_config8(node2, link2 + PCI_HT_CAP_HOST_WIDTH + 1);
+ old_width &= 0x77;
+ needs_reset |= old_width != width;
+
+ /* Set node2's widths */
+ pci_write_config8(node2, link2 + PCI_HT_CAP_HOST_WIDTH + 1, width);
+
+ return needs_reset;
+}
+
+static uint8_t get_linkn_first(uint8_t byte)
+{
+ if(byte & 0x02) { byte = 0; }
+ else if(byte & 0x04) { byte = 1; }
+ else if(byte & 0x08) { byte = 2; }
+ return byte;
+}
+
+static uint8_t get_linkn_last(uint8_t byte)
+{
+ if(byte & 0x02) { byte &= 0x0f; byte |= 0x00; }
+ if(byte & 0x04) { byte &= 0x0f; byte |= 0x10; }
+ if(byte & 0x08) { byte &= 0x0f; byte |= 0x20; }
+ return byte>>4;
+}
+
+static uint8_t get_linkn_last_count(uint8_t byte)
+{
+ byte &= 0x0f;
+ if(byte & 0x02) { byte &= 0xcf; byte |= 0x00; byte+=0x40; }
+ if(byte & 0x04) { byte &= 0xcf; byte |= 0x10; byte+=0x40; }
+ if(byte & 0x08) { byte &= 0xcf; byte |= 0x20; byte+=0x40; }
+ return byte>>4;
+}
+
+static void setup_row_local(u8 source, u8 row) /* source will be 7 when it is for temp use*/
+{
+ uint8_t linkn;
+ uint32_t val;
+ val = 1;
+ for(linkn = 0; linkn<3; linkn++) {
+ uint8_t regpos;
+ uint32_t reg;
+ regpos = 0x98 + 0x20 * linkn;
+ reg = pci_read_config32(NODE_HT(source), regpos);
+ if ((reg & 0x17) != 3) continue; /* it is not conherent or not connected*/
+ val |= 1<<(linkn+1);
+ }
+ val <<= 16;
+ val |= 0x0101;
+ fill_row(source,row, val);
+}
+
+static void setup_row_direct_x(u8 temp, u8 source, u8 dest, u8 linkn)
+{
+ uint32_t val;
+ uint32_t val_s;
+ val = 1<<(linkn+1);
+ val |= 1<<(linkn+1+8); /*for direct connect response route should equal to request table*/
+
+ if(((source &1)!=(dest &1))
+#if CROSS_BAR_47_56
+ && ( (source<4)||(source>5) ) //(6,7) (7,6) should still be here
+ //(6,5) (7,4) should be here
+#endif
+ ){
+ val |= (1<<16);
+ } else {
+ /*for CROSS_BAR_47_56 47, 56, should be here too
+ and for 47, 56, 57, 75, 46, 64 we need to substract another link to
+ 6, 7, 6, 6, 7, 7
+ */
+ val_s = get_row(temp, source);
+ val |= ((val_s>>16) - (1<<(linkn+1)))<<16;
+ }
+
+ fill_row(temp,dest, val );
+}
+
+#if CROSS_BAR_47_56
+static void opt_broadcast_rt(u8 source, u8 dest, u8 kickout) {
+ uint32_t val;
+ val = get_row(source, dest);
+ val -= link_connection(source, kickout)<<16;
+ fill_row(source, dest, val);
+}
+
+static void opt_broadcast_rt_group(const u8 *conn, int num) {
+ int i;
+
+ for(i=0; i<num; i+=3) {
+ opt_broadcast_rt(conn[i], conn[i+1],conn[i+2]);
+ }
+}
+static void opt_broadcast_rt_plus(u8 source, u8 dest, u8 kickout) {
+ uint32_t val;
+ val = get_row(source, dest);
+ val += link_connection(source, kickout)<<16;
+ fill_row(source, dest, val);
+}
+
+static void opt_broadcast_rt_plus_group(const u8 *conn, int num) {
+ int i;
+
+ for(i=0; i<num; i+=3) {
+ opt_broadcast_rt_plus(conn[i], conn[i+1],conn[i+2]);
+ }
+}
+#endif
+
+static void setup_row_direct(u8 source, u8 dest, u8 linkn){
+ setup_row_direct_x(source, source, dest, linkn);
+}
+
+static void setup_remote_row_direct(u8 source, u8 dest, u8 linkn){
+ setup_row_direct_x(7, source, dest, linkn);
+}
+
+static void setup_temp_row(u8 source, u8 dest)
+{
+ /* copy val from (source, dest) to (source,7) */
+ fill_row(source,7,get_row(source,dest));
+}
+
+static void clear_temp_row(u8 source)
+{
+ fill_row(source, 7, DEFAULT);
+}
+
+static void setup_remote_node(u8 node)
+{
+ static const uint8_t pci_reg[] = {
+ 0x44, 0x4c, 0x54, 0x5c, 0x64, 0x6c, 0x74, 0x7c,
+ 0x40, 0x48, 0x50, 0x58, 0x60, 0x68, 0x70, 0x78,
+ 0x84, 0x8c, 0x94, 0x9c, 0xa4, 0xac, 0xb4, 0xbc,
+ 0x80, 0x88, 0x90, 0x98, 0xa0, 0xa8, 0xb0, 0xb8,
+ 0xc4, 0xcc, 0xd4, 0xdc,
+ 0xc0, 0xc8, 0xd0, 0xd8,
+ 0xe0, 0xe4, 0xe8, 0xec,
+ };
+ int i;
+
+ print_spew("setup_remote_node: ");
+
+ /* copy the default resource map from node 0 */
+ for(i = 0; i < sizeof(pci_reg)/sizeof(pci_reg[0]); i++) {
+ uint32_t value;
+ uint8_t reg;
+ reg = pci_reg[i];
+ value = pci_read_config32(NODE_MP(0), reg);
+ pci_write_config32(NODE_MP(7), reg, value);
+
+ }
+ print_spew("done\r\n");
+}
+
+#endif /* CONFIG_MAX_PHYSICAL_CPUS > 1*/
+
+
+#if CONFIG_MAX_PHYSICAL_CPUS > 2
+#if !CROSS_BAR_47_56
+static void setup_row_indirect_x(u8 temp, u8 source, u8 dest)
+#else
+static void setup_row_indirect_x(u8 temp, u8 source, u8 dest, u8 gateway, u8 diff)
+#endif
+{
+ /*for indirect connection, we need to compute the val from val_s(source, source), and val_g(source, gateway) */
+ uint32_t val_s;
+ uint32_t val;
+#if !CROSS_BAR_47_56
+ u8 gateway;
+ u8 diff;
+ if(source<dest) {
+ gateway = source + 2;
+ } else {
+ gateway = source - 2;
+ }
+#endif
+ val_s = get_row(temp, source);
+ val = get_row(temp, gateway);
+
+ val &= 0xffff;
+ val_s >>= 16;
+ val_s &= 0xfe;
+
+#if !CROSS_BAR_47_56
+ diff = ((source&1)!=(dest &1));
+#endif
+
+ if(diff && (val_s!=(val&0xff)) ) { /* use another connect as response*/
+ val_s -= val & 0xff;
+#if (CONFIG_MAX_PHYSICAL_CPUS > 4) || (CONFIG_MAX_PHYSICAL_CPUS_4_BUT_MORE_INSTALLED == 1)
+ uint8_t byte;
+ /* Some node have two links left
+ * don't worry we only have (2, (3 as source need to handle
+ */
+ byte = val_s;
+ byte = get_linkn_last_count(byte);
+ if((byte>>2)>1) { /* make sure not the corner*/
+ if(source<dest) {
+ val_s-=link_connection(temp, source-2); /* -down*/
+ } else {
+#if CROSS_BAR_47_56
+ #if 0
+ if(source==7) {
+ val_s-=link_connection(temp, 6); // for 7,2 via 5
+ } else if (source==6){
+ val_s-=link_connection(temp, 7); // for 6,3 via 4
+ } else
+ #endif
+ if (source < gateway) { // for 5, 4 via 7
+ val_s-=link_connection(temp, source-2);
+ } else
+#endif
+ val_s-=link_connection(temp, source+2); /* -up*/
+ }
+ }
+#endif
+ val &= 0xff;
+ val |= (val_s<<8);
+ }
+
+ if(diff) { /* cross rung?*/
+ val |= (1<<16);
+ }
+ else {
+ val_s = get_row(temp, source);
+ val |= ((val_s>>16) - link_connection(temp, gateway))<<16;
+ }
+
+ fill_row(temp, dest, val);
+
+}
+
+#if !CROSS_BAR_47_56
+static void setup_row_indirect(u8 source, u8 dest)
+{
+ setup_row_indirect_x(source, source, dest);
+}
+#else
+static void setup_row_indirect(u8 source, u8 dest, u8 gateway, u8 diff)
+{
+ setup_row_indirect_x(source, source, dest, gateway, diff);
+}
+#endif
+
+static void setup_row_indirect_group(const u8 *conn, int num)
+{
+ int i;
+
+#if !CROSS_BAR_47_56
+ for(i=0; i<num; i+=2) {
+ setup_row_indirect(conn[i], conn[i+1]);
+#else
+ for(i=0; i<num; i+=4) {
+ setup_row_indirect(conn[i], conn[i+1],conn[i+2], conn[i+3]);
+#endif
+
+ }
+}
+
+#if !CROSS_BAR_47_56
+static void setup_remote_row_indirect(u8 source, u8 dest)
+{
+ setup_row_indirect_x(7, source, dest);
+}
+#else
+static void setup_remote_row_indirect(u8 source, u8 dest, u8 gateway, u8 diff)
+{
+ setup_row_indirect_x(7, source, dest, gateway, diff);
+}
+#endif
+
+static void setup_remote_row_indirect_group(const u8 *conn, int num)
+{
+ int i;
+
+#if !CROSS_BAR_47_56
+ for(i=0; i<num; i+=2) {
+ setup_remote_row_indirect(conn[i], conn[i+1]);
+#else
+ for(i=0; i<num; i+=4) {
+ setup_remote_row_indirect(conn[i], conn[i+1],conn[i+2], conn[i+3]);
+#endif
+ }
+}
+
+#endif /*CONFIG_MAX_PHYSICAL_CPUS > 2*/
+
+
+static void setup_uniprocessor(void)
+{
+ print_spew("Enabling UP settings\r\n");
+#if CONFIG_LOGICAL_CPUS==1
+ unsigned tmp = (pci_read_config32(NODE_MC(0), 0xe8) >> 12) & 3;
+ if (tmp>0) return;
+#endif
+ disable_probes();
+}
+
+#if CONFIG_MAX_PHYSICAL_CPUS > 2
+static int optimize_connection_group(const u8 *opt_conn, int num) {
+ int needs_reset = 0;
+ int i;
+ for(i=0; i<num; i+=2) {
+ needs_reset = optimize_connection(
+ NODE_HT(opt_conn[i]), 0x80 + link_to_register(link_connection(opt_conn[i],opt_conn[i+1])),
+ NODE_HT(opt_conn[i+1]), 0x80 + link_to_register(link_connection(opt_conn[i+1],opt_conn[i])) );
+ }
+ return needs_reset;
+}
+#endif
+
+#if CONFIG_MAX_PHYSICAL_CPUS > 1
+static unsigned setup_smp2(void)
+{
+ unsigned nodes;
+ u8 byte;
+ uint32_t val;
+ nodes = 2;
+
+ setup_row_local(0, 0); /* it will update the broadcast RT*/
+
+ val = get_row(0,0);
+ byte = (val>>16) & 0xfe;
+ if(byte<0x2) { /* no coherent connection so get out.*/
+ nodes = 1;
+ return nodes;
+ }
+
+ /* Setup and check a temporary connection to node 1 */
+#if TRY_HIGH_FIRST == 1
+ byte = get_linkn_last(byte); /* Max Link to node1 */
+#else
+ byte = get_linkn_first(byte); /*Min Link to node1 --- according to AMD*/
+#endif
+ print_linkn("(0,1) link=", byte);
+ setup_row_direct(0,1, byte);
+ setup_temp_row(0, 1);
+
+ verify_connection(7);
+
+ /* We found 2 nodes so far */
+ val = pci_read_config32(NODE_HT(7), 0x6c);
+ byte = (val>>2) & 0x3; /*get default link on node7 to node0*/
+ print_linkn("(1,0) link=", byte);
+ setup_row_local(7,1);
+ setup_remote_row_direct(1, 0, byte);
+
+#if (CONFIG_MAX_PHYSICAL_CPUS > 4) || (CONFIG_MAX_PHYSICAL_CPUS_4_BUT_MORE_INSTALLED == 1)
+ val = get_row(7,1);
+ byte = (val>>16) & 0xfe;
+ byte = get_linkn_last_count(byte);
+ if((byte>>2)==3) { /* Oh! we need to treat it as node2. So use another link*/
+ val = get_row(0,0);
+ byte = (val>>16) & 0xfe;
+#if TRY_HIGH_FIRST == 1
+ byte = get_linkn_first(byte); /* Min link to Node1 */
+#else
+ byte = get_linkn_last(byte); /* Max link to Node1*/
+#endif
+ print_linkn("\t-->(0,1) link=", byte);
+ setup_row_direct(0,1, byte);
+ setup_temp_row(0, 1);
+
+ verify_connection(7);
+
+ /* We found 2 nodes so far */
+ val = pci_read_config32(NODE_HT(7), 0x6c);
+ byte = (val>>2) & 0x3; /* get default link on node7 to node0*/
+ print_linkn("\t-->(1,0) link=", byte);
+ setup_row_local(7,1);
+ setup_remote_row_direct(1, 0, byte);
+ }
+#endif
+
+ setup_remote_node(1); /* Setup the regs on the remote node */
+ rename_temp_node(1); /* Rename Node 7 to Node 1 */
+ enable_routing(1); /* Enable routing on Node 1 */
+#if 0
+ /*don't need and it is done by clear_dead_links */
+ clear_temp_row(0);
+#endif
+
+ return nodes;
+}
+#endif /*CONFIG_MAX_PHYSICAL_CPUS > 1 */
+
+#if CONFIG_MAX_PHYSICAL_CPUS > 2
+
+static unsigned setup_smp4(void)
+{
+ unsigned nodes;
+ u8 byte;
+ uint32_t val;
+
+ nodes=4;
+
+ /* Setup and check temporary connection from Node 0 to Node 2 */
+ val = get_row(0,0);
+ byte = ((val>>16) & 0xfe) - link_connection(0,1);
+ byte = get_linkn_last_count(byte);
+
+ if((byte>>2)==0) { /* We should have two coherent for 4p and above*/
+ nodes = 2;
+ return nodes;
+ }
+
+ byte &= 3; /* bit [3,2] is count-1*/
+ print_linkn("(0,2) link=", byte);
+ setup_row_direct(0, 2, byte); /*(0,2) direct link done*/
+
+ /* We found 3 nodes so far. Now setup a temporary
+ * connection from node 0 to node 3 via node 1
+ */
+ setup_temp_row(0,1); /* temp. link between nodes 0 and 1 */
+ /* here should setup_row_direct(1,3) at first, before that we should find the link in node 1 to 3*/
+ val = get_row(1,1);
+ byte = ((val>>16) & 0xfe) - link_connection(1,0);
+ byte = get_linkn_first(byte);
+ print_linkn("(1,3) link=", byte);
+ setup_row_direct(1,3,byte); /* (1, 3) direct link done*/
+
+ /* We found 4 nodes so far. Now setup all nodes for 4p */
+ // We need to make sure 0,2 and 1,3 link is set already
+#if !CROSS_BAR_47_56
+ static const u8 conn4_1[] = {
+ 0,3,
+ 1,2,
+ };
+#else
+ static const u8 conn4_1[] = {
+ 0,3,2,1,
+ 1,2,3,1,
+ };
+#endif
+
+ setup_row_indirect_group(conn4_1, sizeof(conn4_1)/sizeof(conn4_1[0]));
+
+ setup_temp_row(0,2);
+ verify_connection(7);
+ val = pci_read_config32(NODE_HT(7), 0x6c);
+ byte = (val>>2) & 0x3; /* get default link on 7 to 0*/
+ print_linkn("(2,0) link=", byte);
+
+ setup_row_local(7,2);
+ setup_remote_row_direct(2, 0, byte); /* node 2 to node 0 direct link done */
+ setup_remote_node(2); /* Setup the regs on the remote node */
+
+ rename_temp_node(2); /* Rename Node 7 to Node 2 */
+ enable_routing(2); /* Enable routing on Node 2 */
+
+ setup_temp_row(0,1);
+ setup_temp_row(1,3);
+ verify_connection(7);
+
+ val = pci_read_config32(NODE_HT(7), 0x6c);
+ byte = (val>>2) & 0x3; /* get default link on 7 to 1*/
+ print_linkn("(3,1) link=", byte);
+
+ setup_row_local(7,3);
+ setup_remote_row_direct(3, 1, byte); /* node 3 to node 1 direct link done */
+ setup_remote_node(3); /* Setup the regs on the remote node */
+
+ /* We need to init link between 2, and 3 direct link */
+ val = get_row(2,2);
+ byte = ((val>>16) & 0xfe) - link_connection(2,0);
+ byte = get_linkn_last_count(byte);
+ print_linkn("(2,3) link=", byte & 3);
+
+ setup_row_direct(2,3, byte & 0x3);
+ setup_temp_row(0,2);
+ setup_temp_row(2,3);
+ verify_connection(7); /* to 3*/
+
+#if (CONFIG_MAX_PHYSICAL_CPUS > 4) || (CONFIG_MAX_PHYSICAL_CPUS_4_BUT_MORE_INSTALLED == 1)
+ /* We need to find out which link is to node3 */
+ if((byte>>2)==2) { /* one to node3, one to node0, one to node4*/
+ val = get_row(7,3);
+ if((val>>16) == 1) { /* that link is to node4, because via node1 it has been set, recompute it*/
+ val = get_row(2,2);
+ byte = ((val>>16) & 0xfe) - link_connection(2,0);
+ byte = get_linkn_first(byte);
+ print_linkn("\t-->(2,3) link=", byte);
+ setup_row_direct(2,3,byte);
+ setup_temp_row(2,3);
+ verify_connection(7); /* to 3*/
+ }
+ }
+#endif
+
+ val = pci_read_config32(NODE_HT(7), 0x6c);
+ byte = (val>>2) & 0x3; /* get default link on 7 to 2*/
+ print_linkn("(3,2) link=", byte);
+ setup_remote_row_direct(3,2, byte);
+
+#if (CONFIG_MAX_PHYSICAL_CPUS > 4) || (CONFIG_MAX_PHYSICAL_CPUS_4_BUT_MORE_INSTALLED == 1)
+ /* set link from 3 to 5 before enable it*/
+ val = get_row(7,3);
+ byte = ((val>>16) & 0xfe) - link_connection(7,2) - link_connection(7,1);
+ byte = get_linkn_last_count(byte);
+ if((byte>>2)==1) { /* We should have three coherent links on node 3 for 6p and above*/
+ byte &= 3; /*bit [3,2] is count-2*/
+ print_linkn("(3,5) link=", byte);
+ setup_remote_row_direct(3, 5, byte);
+ }
+
+ val = get_row(2,2);
+ byte = ((val>>16) & 0xfe) - link_connection(2,3) - link_connection(2,0);
+ byte = get_linkn_last_count(byte);
+
+ if((byte>>2)==1) { /* We should have three coherent link on node 2 for 6p and above*/
+ byte &= 3; /* bit [3,2] is count-2*/
+ print_linkn("(2,4) link=", byte);
+ setup_row_direct(2, 4, byte);
+ }
+#endif
+
+ //Beside 3, 1 is set, We need to make sure 3, 5 is set already in case has three link in 3
+#if !CROSS_BAR_47_56
+ static const u8 conn4_3[] = {
+ 3,0,
+ };
+#else
+ static const u8 conn4_3[] = {
+ 3,0,1,1,
+ };
+#endif
+ setup_remote_row_indirect_group(conn4_3, sizeof(conn4_3)/sizeof(conn4_3[0]));
+
+/* ready to enable RT for Node 3 */
+ rename_temp_node(3);
+ enable_routing(3); /* enable routing on node 3 (temp.) */
+
+ // beside 2, 0 is set, We need to make sure 2, 4 link is set already in case has three link in 2
+#if !CROSS_BAR_47_56
+ static const u8 conn4_2[] = {
+ 2,1,
+ };
+#else
+ static const u8 conn4_2[] = {
+ 2,1,0,1,
+ };
+#endif
+ setup_row_indirect_group(conn4_2, sizeof(conn4_2)/sizeof(conn4_2[0]));
+
+#if 0
+ /*We need to do sth to reverse work for setup_temp_row (0,1) (1,3) */
+ /* it will be done by clear_dead_links */
+ clear_temp_row(0);
+ clear_temp_row(1);
+#endif
+
+ return nodes;
+
+}
+
+#endif /* CONFIG_MAX_PHYSICAL_CPUS > 2 */
+
+#if CONFIG_MAX_PHYSICAL_CPUS > 4
+
+static unsigned setup_smp6(void)
+{
+ unsigned nodes;
+ u8 byte;
+ uint32_t val;
+
+ nodes=6;
+
+ /* Setup and check temporary connection from Node 0 to Node 4 through 2*/
+ val = get_row(2,2);
+ byte = ((val>>16) & 0xfe) - link_connection(2,3) - link_connection(2,0);
+ byte = get_linkn_last_count(byte);
+
+ if((byte>>2)==0) { /* We should have three coherent link on node 2 for 6p and above*/
+ nodes = 4;
+ return nodes;
+ }
+
+ /* Setup and check temporary connection from Node 0 to Node 5 through 1, 3*/
+ /* set link from 3 to 5 before enable it*/
+ val = get_row(3,3);
+ byte = ((val>>16) & 0xfe) - link_connection(3,2) - link_connection(3,1);
+ byte = get_linkn_last_count(byte);
+ if((byte>>2)==0) { /* We should have three coherent links on node 3 for 6p and above*/
+ nodes = 4;
+ return nodes;
+ }
+
+ /* We found 6 nodes so far. Now setup all nodes for 6p */
+#warning "FIXME we need to find out the correct gateway for 6p"
+ static const u8 conn6_1[] = {
+#if !CROSS_BAR_47_56
+ 0, 4,
+ 0, 5,
+ 1, 4,
+ 1, 5,
+ 2, 5,
+ 3, 4,
+#else
+ 0, 4, 2, 0,
+ 0, 5, 2, 1,
+ 1, 4, 3, 1,
+ 1, 5, 3, 0,
+ 2, 5, 3, 0,
+ 3, 4, 2, 0,
+#endif
+ };
+
+ setup_row_indirect_group(conn6_1, sizeof(conn6_1)/sizeof(conn6_1[0]));
+
+ for(byte=0; byte<4; byte+=2) {
+ setup_temp_row(byte,byte+2);
+ }
+ verify_connection(7);
+ val = pci_read_config32(NODE_HT(7), 0x6c);
+ byte = (val>>2) & 0x3; /*get default link on 7 to 2*/
+ print_linkn("(4,2) link=", byte);
+
+ setup_row_local(7,4);
+ setup_remote_row_direct(4, 2, byte);
+ setup_remote_node(4); /* Setup the regs on the remote node */
+
+ /* Set indirect connection to 0, to 3 */
+ //we only need to set 4,0 here
+ static const u8 conn6_2[] = {
+#if !CROSS_BAR_47_56
+ 4, 0,
+#else
+ 4, 0, 2, 0,
+#endif
+ };
+
+ setup_remote_row_indirect_group(conn6_2, sizeof(conn6_2)/sizeof(conn6_2[0]));
+
+ rename_temp_node(4);
+ enable_routing(4);
+
+ setup_temp_row(0,1);
+ for(byte=0; byte<4; byte+=2) {
+ setup_temp_row(byte+1,byte+3);
+ }
+ verify_connection(7);
+
+ val = pci_read_config32(NODE_HT(7), 0x6c);
+ byte = (val>>2) & 0x3; /* get default link on 7 to 3*/
+ print_linkn("(5,3) link=", byte);
+ setup_row_local(7,5);
+ setup_remote_row_direct(5, 3, byte);
+ setup_remote_node(5); /* Setup the regs on the remote node */
+
+#if !CROSS_BAR_47_56
+ /* We need to init link between 4, and 5 direct link */
+ val = get_row(4,4);
+ byte = ((val>>16) & 0xfe) - link_connection(4,2);
+ byte = get_linkn_last_count(byte);
+ print_linkn("(4,5) link=", byte & 3);
+
+ setup_row_direct(4,5, byte & 0x3);
+ setup_temp_row(0,2);
+ setup_temp_row(2,4);
+ setup_temp_row(4,5);
+ verify_connection(7); /* to 5*/
+
+#if CONFIG_MAX_PHYSICAL_CPUS > 6
+ /* We need to find out which link is to node5 */
+
+ if((byte>>2)==2) { /* one to node5, one to node2, one to node6*/
+ val = get_row(7,5);
+ if((val>>16) == 1) { /* that link is to node6, because via node 3 node 5 has been set*/
+ val = get_row(4,4);
+ byte = ((val>>16) & 0xfe) - link_connection(4,2);
+ byte = get_linkn_first(byte);
+ print_linkn("\t-->(4,5) link=", byte);
+ setup_row_direct(4,5,byte);
+ setup_temp_row(4,5);
+ verify_connection(7); /* to 5*/
+ }
+ }
+#endif
+
+ val = pci_read_config32(NODE_HT(7), 0x6c);
+ byte = (val>>2) & 0x3; /* get default link on 7 to 4*/
+ print_linkn("(5,4) link=", byte);
+ setup_remote_row_direct(5,4, byte);
+
+ //init 5, 7 here
+ val = get_row(7,5);
+ byte = ((val>>16) & 0xfe) - link_connection(7,4) - link_connection(7,3);
+ byte = get_linkn_last_count(byte);
+ if((byte>>2)==1) { /* We should have three coherent links on node 5 for 6p and above*/
+ byte &= 3; /*bit [3,2] is count-2*/
+ print_linkn("(5,7) link=", byte);
+ setup_remote_row_direct(5, 7, byte);
+ }
+
+ //init 4,6 here
+ val = get_row(4,4);
+ byte = ((val>>16) & 0xfe) - link_connection(4,5) - link_connection(4,2);
+ byte = get_linkn_last_count(byte);
+
+ if((byte>>2)==1) { /* We should have three coherent link on node 4 for 6p and above*/
+ byte &= 3; /* bit [3,2] is count-2*/
+ print_linkn("(4,6) link=", byte);
+ setup_row_direct(4, 6, byte);
+ }
+
+#endif
+
+ //We need to set 5,0 here only, We need to set up 5, 7 to make 5,0
+ /* Set indirect connection to 0, to 3 for indirect we will use clockwise routing */
+ static const u8 conn6_3[] = {
+#if !CROSS_BAR_47_56
+ 5, 0,
+#else
+ 5, 0, 3, 0,
+#endif
+ };
+
+ setup_remote_row_indirect_group(conn6_3, sizeof(conn6_3)/sizeof(conn6_3[0]));
+
+/* ready to enable RT for 5 */
+ rename_temp_node(5);
+ enable_routing(5); /* enable routing on node 5 (temp.) */
+
+ static const u8 conn6_4[] = {
+#if !CROSS_BAR_47_56
+ 4, 1,
+ 4, 3,
+
+ 5, 2,
+ 5, 1,
+
+#else
+ 4, 1, 2, 0,
+ 4, 3, 2, 0,
+ 4, 5, 2, 0,
+
+ 5, 2, 3, 0,
+ 5, 1, 3, 0,
+ 5, 4, 3, 0,
+
+#endif
+ };
+
+ setup_row_indirect_group(conn6_4, sizeof(conn6_4)/sizeof(conn6_4[0]));
+
+#if 0
+ /* We need to do sth about reverse about setup_temp_row (0,1), (2,4), (1, 3), (3,5)
+ * It will be done by clear_dead_links
+ */
+ for(byte=0; byte<4; byte++) {
+ clear_temp_row(byte);
+ }
+#endif
+
+ return nodes;
+
+}
+
+#endif /* CONFIG_MAX_PHYSICAL_CPUS > 4 */
+
+#if CONFIG_MAX_PHYSICAL_CPUS > 6
+
+static unsigned setup_smp8(void)
+{
+ unsigned nodes;
+ u8 byte;
+ uint32_t val;
+
+ nodes=8;
+
+ /* Setup and check temporary connection from Node 0 to Node 6 via 2 and 4 to 7 */
+ val = get_row(4,4);
+#if CROSS_BAR_47_56
+ byte = ((val>>16) & 0xfe) - link_connection(4,2);
+#else
+ byte = ((val>>16) & 0xfe) - link_connection(4,5) - link_connection(4,2);
+ byte = get_linkn_last_count(byte); /* Max link to 6*/
+ if((byte>>2)==0) { /* We should have two or three coherent links on node 4 for 8p*/
+ nodes = 6;
+ return nodes;
+ }
+#endif
+
+#if CROSS_BAR_47_56
+ byte = get_linkn_last_count(byte); /* Max link to 6*/
+ if((byte>>2)<2) { /* We should have two or three coherent links on node 4 for 8p*/
+ nodes = 6;
+ return nodes;
+ }
+#if TRY_HIGH_FIRST == 1
+ byte = ((val>>16) & 0xfe) - link_connection(4,2);
+ byte = get_linkn_first(byte); /*Min link to 6*/
+#else
+ byte &= 3; /* bit [3,2] is count-1 or 2*/
+#endif
+ print_linkn("(4,6) link=", byte);
+ setup_row_direct(4, 6, byte);
+#endif
+
+#if !CROSS_BAR_47_56
+ /* Setup and check temporary connection from Node 0 to Node 7 through 1, 3, 5*/
+ val = get_row(5,5);
+ byte = ((val>>16) & 0xfe) - link_connection(5,4) - link_connection(5,3);
+ byte = get_linkn_last_count(byte);
+ if((byte>>2)==0) { /* We should have three coherent links on node 5 for 6p and above*/
+ nodes = 6;
+ return nodes;
+ }
+#endif
+
+ /* We found 8 nodes so far. Now setup all nodes for 8p */
+ static const u8 conn8_1[] = {
+#if !CROSS_BAR_47_56
+ 0, 6,
+ /*0, 7,*/
+ 1, 6,
+ /*1, 7,*/
+ 2, 6,
+ /*2, 7,*/
+ 3, 6,
+ /*3, 7,*/
+ /*4, 7,*/
+ 5, 6,
+#else
+ 0, 6, 2, 0,
+ /*0, 7, 2, 0,*/
+ 1, 6, 3, 0,
+ /*1, 7, 3, 0,*/
+ 2, 6, 4, 0,
+ /*2, 7, 4, 0,*/
+ 3, 6, 5, 1,
+ /*3, 7, 5, 0,*/
+#endif
+ };
+
+ setup_row_indirect_group(conn8_1,sizeof(conn8_1)/sizeof(conn8_1[0]));
+
+ for(byte=0; byte<6; byte+=2) {
+ setup_temp_row(byte,byte+2);
+ }
+ verify_connection(7);
+ val = pci_read_config32(NODE_HT(7), 0x6c);
+ byte = (val>>2) & 0x3; /* get default link on 7 to 4*/
+ print_linkn("(6,4) link=", byte);
+
+ setup_row_local(7,6);
+ setup_remote_row_direct(6, 4, byte);
+ setup_remote_node(6); /* Setup the regs on the remote node */
+ /* Set indirect connection to 0, to 3 */
+#warning "FIXME we need to find out the correct gateway for 8p"
+ static const u8 conn8_2[] = {
+#if !CROSS_BAR_47_56
+ 6, 0,
+#else
+ 6, 0, 4, 0,
+#endif
+ };
+
+ setup_remote_row_indirect_group(conn8_2, sizeof(conn8_2)/sizeof(conn8_2[0]));
+
+#if CROSS_BAR_47_56
+ //init 5, 6 here
+ /* here init 5, 6 */
+ /* Setup and check temporary connection from Node 0 to Node 5 through 1, 3, 5*/
+ val = get_row(5,5);
+ byte = ((val>>16) & 0xfe) - link_connection(5,3);
+#if TRY_HIGH_FIRST == 1
+ byte = get_linkn_first(byte);
+#else
+ byte = get_linkn_last(byte);
+#endif
+ print_linkn("(5,6) link=", byte);
+ setup_row_direct(5, 6, byte);
+
+ setup_temp_row(0,1); /* temp. link between nodes 0 and 1 */
+ for(byte=0; byte<4; byte+=2) {
+ setup_temp_row(byte+1,byte+3);
+ }
+ setup_temp_row(5,6);
+
+ verify_connection(7);
+
+ val = get_row(7,6); // to chect it if it is node6 before renaming
+ if( (val>>16) == 1) { // it is real node 7 so swap it
+ /* We need to recompute link to 6 */
+ val = get_row(5,5);
+ byte = ((val>>16) & 0xfe) - link_connection(5,3);
+#if TRY_HIGH_FIRST == 1
+ byte = get_linkn_first(byte);
+#else
+ byte = get_linkn_last(byte);
+#endif
+ print_linkn("\t-->(5,6) link=", byte);
+ setup_row_direct(5, 6, byte);
+#if 0
+ setup_temp_row(0,1); /* temp. link between nodes 0 and 1 */
+ for(byte=0; byte<4; byte+=2) {
+ setup_temp_row(byte+1,byte+3);
+ }
+#endif
+ setup_temp_row(5,6);
+
+ verify_connection(7);
+ }
+ val = pci_read_config32(NODE_HT(7), 0x6c);
+ byte = (val>>2) & 0x3; /* get default link on 7 to 5*/
+ print_linkn("(6,5) link=", byte);
+ setup_remote_row_direct(6, 5, byte);
+ /*Till now 56, 65 done */
+#endif
+
+ rename_temp_node(6);
+ enable_routing(6);
+
+#if !CROSS_BAR_47_56
+ setup_temp_row(0,1);
+ for(byte=0; byte<6; byte+=2) {
+ setup_temp_row(byte+1,byte+3);
+ }
+
+ verify_connection(7);
+
+ val = pci_read_config32(NODE_HT(7), 0x6c);
+ byte = (val>>2) & 0x3; /* get default link on 7 to 5*/
+ print_linkn("(7,5) link=", byte);
+ setup_row_local(7,7);
+ setup_remote_row_direct(7, 5, byte);
+
+#else
+ val = get_row(4,4);
+ byte = ((val>>16) & 0xfe) - link_connection(4,2) - link_connection(4,6);
+ byte = get_linkn_first(byte);
+ print_linkn("(4,7) link=", byte);
+ setup_row_direct(4, 7, byte);
+
+ /* Setup and check temporary connection from Node 0 to Node 7 through 2, and 4*/
+ for(byte=0; byte<4; byte+=2) {
+ setup_temp_row(byte,byte+2);
+ }
+
+ verify_connection(7);
+
+ val = pci_read_config32(NODE_HT(7), 0x6c);
+ byte = (val>>2) & 0x3; /* get default link on 7 to 4*/
+ print_linkn("(7,4) link=", byte);
+ setup_row_local(7,7);
+ setup_remote_row_direct(7, 4, byte);
+ /* till now 4-7, 7-4 done. */
+#endif
+ setup_remote_node(7); /* Setup the regs on the remote node */
+
+#if CROSS_BAR_47_56
+ /* here init 5, 7 */
+ /* Setup and check temporary connection from Node 0 to Node 5 through 1, 3, 5*/
+ val = get_row(5,5);
+ byte = ((val>>16) & 0xfe) - link_connection(5,3) - link_connection(5,6);
+ byte = get_linkn_first(byte);
+ print_linkn("(5,7) link=", byte);
+ setup_row_direct(5, 7, byte);
+
+ setup_temp_row(0,1); /* temp. link between nodes 0 and 1 */
+ for(byte=0; byte<4; byte+=2) {
+ setup_temp_row(byte+1,byte+3);
+ }
+
+ verify_connection(7);
+
+ val = pci_read_config32(NODE_HT(7), 0x6c);
+ byte = (val>>2) & 0x3; /* get default link on 7 to 5*/
+ print_linkn("(7,5) link=", byte);
+ setup_remote_row_direct(7, 5, byte);
+ /*Till now 57, 75 done */
+
+#endif
+
+ /* We need to init link between 6, and 7 direct link */
+ val = get_row(6,6);
+#if !CROSS_BAR_47_56
+ byte = ((val>>16) & 0xfe) - link_connection(6,4);
+#else
+ byte = ((val>>16) & 0xfe) - link_connection(6,4) - link_connection(6,5);
+#endif
+ byte = get_linkn_first(byte);
+ print_linkn("(6,7) link=", byte);
+ setup_row_direct(6,7, byte);
+
+ val = get_row(7,7);
+#if !CROSS_BAR_47_56
+ byte = ((val>>16) & 0xfe) - link_connection(7,5);
+#else
+ byte = ((val>>16) & 0xfe) - link_connection(7,5) - link_connection(7,4);
+#endif
+ byte = get_linkn_first(byte);
+ print_linkn("(7,6) link=", byte);
+ setup_row_direct(7,6, byte);
+
+ /* Set indirect connection to 0, to 3 for indirect we will use clockwise routing */
+ static const u8 conn8_3[] = {
+#if !CROSS_BAR_47_56
+ 0, 7, /* restore it*/
+ 1, 7,
+ 2, 7,
+ 3, 7,
+ 4, 7,
+
+ 6, 1,
+ 6, 2,
+ 6, 3,
+ 6, 5,
+
+ 7, 0,
+ 7, 1,
+ 7, 2,
+ 7, 3,
+ 7, 4,
+#else
+
+
+ 4, 5, 6, 1,
+ 5, 4, 7, 1,
+
+ 6, 1, 5, 0, // or 4, 1
+ 6, 2, 4, 0,
+ 6, 3, 5, 0, // or 4, 1
+
+ 7, 0, 4, 0, // or 5, 1
+ 7, 1, 5, 0,
+ 7, 2, 4, 0, // or 5, 1
+ 7, 3, 5, 0,
+
+ 0, 7, 2, 0, /* restore it*/
+ 1, 7, 3, 0,
+ 2, 7, 4, 1,
+ 3, 7, 5, 0,
+
+ 2, 5, 4, 1, /* reset it */
+ 3, 4, 5, 1,
+
+ 4, 1, 2, 1, /* reset it */
+ 4, 3, 2, 1,
+
+ 5, 2, 3, 1, /* reset it */
+ 5, 0, 3, 1,
+
+#endif
+ };
+
+ setup_row_indirect_group(conn8_3, sizeof(conn8_3)/sizeof(conn8_3[0]));
+
+#if CROSS_BAR_47_56
+ /* for 47, 56, 57, 75, 46, 64 we need to substract another link to
+ 6, 7, 6, 6, 7, 7 */
+ static const u8 conn8_4[] = {
+//direct
+ 4, 7, 6,
+ 5, 6, 7,
+ 5, 7, 6,
+ 7, 5, 6,
+ 4, 6, 7,
+ 6, 4, 7,
+
+//in direct
+ 0, 6, 1,
+ 0, 7, 1,
+
+ 1, 6, 0,
+ 1, 7, 0,
+
+ 2, 6, 3,
+// 2, 7, 3, +
+
+// 3, 6, 1, +
+ 3, 7, 2,
+
+ 6, 0, 7,
+ 6, 1, 7, // needed for via 5
+ 6, 1, 4, // ???
+ 6, 2, 7,
+ 6, 3, 7, // needed for via 5
+ 6, 3, 4, //???
+ 7, 0, 6, // needed for via 4
+ 7, 0, 5, //???
+ 7, 1, 6,
+ 7, 2, 6, // needed for via 4
+ 7, 2, 5, //???
+ 7, 3, 6,
+ };
+
+ opt_broadcast_rt_group(conn8_4, sizeof(conn8_4)/sizeof(conn8_4[0]));
+
+ static const u8 conn8_5[] = {
+ 2, 7, 0,
+
+ 3, 6, 1,
+ };
+
+ opt_broadcast_rt_plus_group(conn8_5, sizeof(conn8_5)/sizeof(conn8_5[0]));
+#endif
+
+
+
+/* ready to enable RT for Node 7 */
+ enable_routing(7); /* enable routing on node 7 (temp.) */
+
+ return nodes;
+}
+
+#endif /* CONFIG_MAX_PHYSICAL_CPUS > 6 */
+
+
+#if CONFIG_MAX_PHYSICAL_CPUS > 1
+
+static unsigned setup_smp(void)
+{
+ unsigned nodes;
+
+ print_spew("Enabling SMP settings\r\n");
+
+ nodes = setup_smp2();
+#if CONFIG_MAX_PHYSICAL_CPUS > 2
+ if(nodes == 2)
+ nodes = setup_smp4();
+#endif
+
+#if CONFIG_MAX_PHYSICAL_CPUS > 4
+ if(nodes == 4)
+ nodes = setup_smp6();
+#endif
+
+#if CONFIG_MAX_PHYSICAL_CPUS > 6
+ if(nodes == 6)
+ nodes = setup_smp8();
+#endif
+
+#if CONFIG_USE_INIT
+ printk_debug("%02x nodes initialized.\r\n", nodes);
+#else
+ print_debug_hex8(nodes);
+ print_debug(" nodes initialized.\r\n");
+#endif
+
+ return nodes;
+}
+
+static unsigned verify_mp_capabilities(unsigned nodes)
+{
+ unsigned node, mask;
+
+ mask = 0x06; /* BigMPCap */
+
+ for (node=0; node<nodes; node++) {
+ mask &= pci_read_config32(NODE_MC(node), 0xe8);
+ }
+
+ switch(mask) {
+#if CONFIG_MAX_PHYSICAL_CPUS > 2
+ case 0x02: /* MPCap */
+ if(nodes > 2) {
+ print_err("Going back to DP\r\n");
+ return 2;
+ }
+ break;
+#endif
+ case 0x00: /* Non SMP */
+ if(nodes >1 ) {
+ print_err("Going back to UP\r\n");
+ return 1;
+ }
+ break;
+ }
+
+ return nodes;
+
+}
+
+
+static void clear_dead_routes(unsigned nodes)
+{
+ int last_row;
+ int node, row;
+#if CONFIG_MAX_PHYSICAL_CPUS == 8
+ if(nodes==8) return;/* don't touch (7,7)*/
+#endif
+ last_row = nodes;
+ if (nodes == 1) {
+ last_row = 0;
+ }
+ for(node = 7; node >= 0; node--) {
+ for(row = 7; row >= last_row; row--) {
+ fill_row(node, row, DEFAULT);
+ }
+ }
+
+ /* Update the local row */
+ for( node=0; node<nodes; node++) {
+ uint32_t val = 0;
+ for(row =0; row<nodes; row++) {
+ val |= get_row(node, row);
+ }
+ fill_row(node, node, (((val & 0xff) | ((val >> 8) & 0xff)) << 16) | 0x0101);
+ }
+}
+#endif /* CONFIG_MAX_PHYSICAL_CPUS > 1 */
+
+#if CONFIG_LOGICAL_CPUS==1
+static unsigned verify_dualcore(unsigned nodes)
+{
+ unsigned node, totalcpus, tmp;
+
+ totalcpus = 0;
+ for (node=0; node<nodes; node++) {
+ tmp = (pci_read_config32(NODE_MC(node), 0xe8) >> 12) & 3 ;
+ totalcpus += (tmp + 1);
+ }
+
+ return totalcpus;
+
+}
+#endif
+
+static void coherent_ht_finalize(unsigned nodes)
+{
+ unsigned node;
+ int rev_a0;
+#if CONFIG_LOGICAL_CPUS==1
+ unsigned total_cpus;
+
+ if(read_option(CMOS_VSTART_dual_core, CMOS_VLEN_dual_core, 0) == 0) { /* dual_core */
+ total_cpus = verify_dualcore(nodes);
+ }
+ else {
+ total_cpus = nodes;
+ }
+#endif
+
+ /* set up cpu count and node count and enable Limit
+ * Config Space Range for all available CPUs.
+ * Also clear non coherent hypertransport bus range
+ * registers on Hammer A0 revision.
+ */
+
+ print_spew("coherent_ht_finalize\r\n");
+ rev_a0 = is_cpu_rev_a0();
+ for (node = 0; node < nodes; node++) {
+ device_t dev;
+ uint32_t val;
+ dev = NODE_HT(node);
+
+ /* Set the Total CPU and Node count in the system */
+ val = pci_read_config32(dev, 0x60);
+ val &= (~0x000F0070);
+#if CONFIG_LOGICAL_CPUS==1
+ val |= ((total_cpus-1)<<16)|((nodes-1)<<4);
+#else
+ val |= ((nodes-1)<<16)|((nodes-1)<<4);
+#endif
+ pci_write_config32(dev, 0x60, val);
+
+ /* Only respond to real cpu pci configuration cycles
+ * and optimize the HT settings
+ */
+ val=pci_read_config32(dev, HT_TRANSACTION_CONTROL);
+ val &= ~((HTTC_BUF_REL_PRI_MASK << HTTC_BUF_REL_PRI_SHIFT) |
+ (HTTC_MED_PRI_BYP_CNT_MASK << HTTC_MED_PRI_BYP_CNT_SHIFT) |
+ (HTTC_HI_PRI_BYP_CNT_MASK << HTTC_HI_PRI_BYP_CNT_SHIFT));
+ val |= HTTC_LIMIT_CLDT_CFG |
+ (HTTC_BUF_REL_PRI_8 << HTTC_BUF_REL_PRI_SHIFT) |
+ (3 << HTTC_MED_PRI_BYP_CNT_SHIFT) |
+ (3 << HTTC_HI_PRI_BYP_CNT_SHIFT);
+ pci_write_config32(dev, HT_TRANSACTION_CONTROL, val);
+
+ if (rev_a0) {
+ pci_write_config32(dev, 0x94, 0);
+ pci_write_config32(dev, 0xb4, 0);
+ pci_write_config32(dev, 0xd4, 0);
+ }
+ }
+
+ print_spew("done\r\n");
+}
+
+static int apply_cpu_errata_fixes(unsigned nodes)
+{
+ unsigned node;
+ int needs_reset = 0;
+ for(node = 0; node < nodes; node++) {
+ device_t dev;
+ uint32_t cmd;
+ dev = NODE_MC(node);
+ if (is_cpu_pre_c0()) {
+
+ /* Errata 66
+ * Limit the number of downstream posted requests to 1
+ */
+ cmd = pci_read_config32(dev, 0x70);
+ if ((cmd & (3 << 0)) != 2) {
+ cmd &= ~(3<<0);
+ cmd |= (2<<0);
+ pci_write_config32(dev, 0x70, cmd );
+ needs_reset = 1;
+ }
+ cmd = pci_read_config32(dev, 0x7c);
+ if ((cmd & (3 << 4)) != 0) {
+ cmd &= ~(3<<4);
+ cmd |= (0<<4);
+ pci_write_config32(dev, 0x7c, cmd );
+ needs_reset = 1;
+ }
+ /* Clock Power/Timing Low */
+ cmd = pci_read_config32(dev, 0xd4);
+ if (cmd != 0x000D0001) {
+ cmd = 0x000D0001;
+ pci_write_config32(dev, 0xd4, cmd);
+ needs_reset = 1; /* Needed? */
+ }
+
+ }
+ else if (is_cpu_pre_d0()) { // d0 later don't need it
+ uint32_t cmd_ref;
+ /* Errata 98
+ * Set Clk Ramp Hystersis to 7
+ * Clock Power/Timing Low
+ */
+ cmd_ref = 0x04e20707; /* Registered */
+ cmd = pci_read_config32(dev, 0xd4);
+ if(cmd != cmd_ref) {
+ pci_write_config32(dev, 0xd4, cmd_ref );
+ needs_reset = 1; /* Needed? */
+ }
+ }
+ }
+ return needs_reset;
+}
+
+static int optimize_link_read_pointers(unsigned nodes)
+{
+ unsigned node;
+ int needs_reset = 0;
+ for(node = 0; node < nodes; node++) {
+ device_t f0_dev, f3_dev;
+ uint32_t cmd_ref, cmd;
+ int link;
+ f0_dev = NODE_HT(node);
+ f3_dev = NODE_MC(node);
+ cmd_ref = cmd = pci_read_config32(f3_dev, 0xdc);
+ for(link = 0; link < 3; link++) {
+ uint32_t link_type;
+ unsigned reg;
+ /* This works on an Athlon64 because unimplemented links return 0 */
+ reg = 0x98 + (link * 0x20);
+ link_type = pci_read_config32(f0_dev, reg);
+ /* Only handle coherent links */
+ if ((link_type & (LinkConnected | InitComplete|NonCoherent)) ==
+ (LinkConnected|InitComplete))
+ {
+ cmd &= ~(0xff << (link *8));
+ cmd |= 0x25 << (link *8);
+ }
+ }
+ if (cmd != cmd_ref) {
+ pci_write_config32(f3_dev, 0xdc, cmd);
+ needs_reset = 1;
+ }
+ }
+ return needs_reset;
+}
+
+static int optimize_link_coherent_ht(void)
+{
+ int needs_reset = 0;
+
+ unsigned nodes;
+
+ nodes = get_nodes();
+
+#if CONFIG_MAX_PHYSICAL_CPUS > 1
+ if(nodes>1) {
+ needs_reset |= optimize_connection(
+ NODE_HT(0), 0x80 + link_to_register(link_connection(0,1)),
+ NODE_HT(1), 0x80 + link_to_register(link_connection(1,0)) );
+ }
+
+#if CONFIG_MAX_PHYSICAL_CPUS > 2
+ if(nodes>2) {
+ /* optimize physical connections - by LYH */
+ static const u8 opt_conn4[] = {
+ 0,2,
+ 1,3,
+ 2,3,
+ };
+ needs_reset |= optimize_connection_group(opt_conn4, sizeof(opt_conn4)/sizeof(opt_conn4[0]));
+ }
+#endif
+
+#if CONFIG_MAX_PHYSICAL_CPUS > 4
+ if(nodes>4) {
+ static const uint8_t opt_conn6[] ={
+ 2, 4,
+ 3, 5,
+ #if !CROSS_BAR_47_56
+ 4, 5,
+ #endif
+ };
+ needs_reset |= optimize_connection_group(opt_conn6, sizeof(opt_conn6)/sizeof(opt_conn6[0]));
+ }
+#endif
+
+#if CONFIG_MAX_PHYSICAL_CPUS > 6
+ if(nodes>6) {
+ static const uint8_t opt_conn8[] ={
+ 4, 6,
+ #if CROSS_BAR_47_56
+ 4, 7,
+ 5, 6,
+ #endif
+ 5, 7,
+ 6, 7,
+ };
+ needs_reset |= optimize_connection_group(opt_conn8, sizeof(opt_conn8)/sizeof(opt_conn8[0]));
+ }
+#endif
+
+#endif
+
+ needs_reset |= apply_cpu_errata_fixes(nodes);
+ needs_reset |= optimize_link_read_pointers(nodes);
+
+ return needs_reset;
+}
+
+#if RAMINIT_SYSINFO == 1
+static void setup_coherent_ht_domain(void)
+#else
+static int setup_coherent_ht_domain(void)
+#endif
+{
+ unsigned nodes;
+ nodes = 1;
+
+ enable_bsp_routing();
+
+#if CONFIG_MAX_PHYSICAL_CPUS > 1
+ nodes = setup_smp();
+ nodes = verify_mp_capabilities(nodes);
+ clear_dead_routes(nodes);
+#endif
+
+ if (nodes == 1) {
+ setup_uniprocessor();
+ }
+ coherent_ht_finalize(nodes);
+
+#if RAMINIT_SYSINFO == 0
+ return optimize_link_coherent_ht();
+#endif
+}
+
projects / coreboot.git / commitdiff