util/ renames

Acked-by: Stefan Reinauer <stepan@coresystems.de>
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3056 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

diff --git a/util/getpir/README b/util/getpir/README
index 771aeb9bfb7ec79bbff8b18a3f8721e01eba7016..6c5d6e2b53aacd4eda3408f42caf9e4fe8671818 100644 (file)
--- a/util/getpir/README
+++ b/util/getpir/README
@@ -6,14 +6,14 @@ specialy when you are testing new motherboards, changing your hardware often, pl
 
 INSTALL:
 
-edit Makefile, define the root to Linuxbios tree
+edit Makefile, define the root to coreboot tree
 make
 
 USAGE:
 
 ./getpir
 
-Will dump irq table to the file called irq_tables.c, ready to use with Linuxbios. Just move the 
+Will dump irq table to the file called irq_tables.c, ready to use with coreboot. Just move the 
 file to corresponding place in the linux bios tree.
 
 

diff --git a/util/getpir/checkpir.c b/util/getpir/checkpir.c
index 6a9a79fa28c56dacd62df5dc091b52cb40874337..c9703c6f3c2ac851262fcd07699e4d88ff2d2afd 100644 (file)
--- a/util/getpir/checkpir.c
+++ b/util/getpir/checkpir.c
@@ -1,5 +1,5 @@
 /* checkpir.c : This software is released under GPL
- * For LinuxBIOS use only
+ * For coreboot use only
  * Aug 26 2001 , Nikolai Vladychevski, <niko@isl.net.mx>
  */
 
@@ -20,7 +20,7 @@ int main(void)
        printf("(no other tests are done)\n");
 
        if (!sum) {
-               printf("Checksum for IRQ Routing table is ok. You can use irq_tables.c in LinuxBIOS now.\n");
+               printf("Checksum for IRQ Routing table is ok. You can use irq_tables.c in coreboot now.\n");
        } else {
                newsum = rt->checksum - sum;
                printf("BAD CHECKSUM for IRQ Routing table !!!!\n");

diff --git a/util/getpir/getpir.c b/util/getpir/getpir.c
index 12b4a20f22b7bfd27c4e9d1a024d7bbfa5df4de5..d0ad978a401ac38b0d528839d05b51e4acb6c514 100644 (file)
--- a/util/getpir/getpir.c
+++ b/util/getpir/getpir.c
@@ -1,5 +1,5 @@
 /* getpir.c : This software is released under GPL
- * For LinuxBIOS use only
+ * For coreboot use only
  * Aug 26 2001 , Nikolai Vladychevski, <niko@isl.net.mx>
  * 2007.04.09 Jeremy Jackson <jerj@coplanar.net>
  *     updated for amd64 and general 64 bit portability
@@ -78,7 +78,7 @@ int main(void)
 
        close(fd_mem);
 
-       printf("Done, you can move the file to the LinuxBIOS tree now.\n");
+       printf("Done, you can move the file to the coreboot tree now.\n");
 
        return 0;
 }

diff --git a/util/superiotool/README b/util/superiotool/README
index cd43941531989c1619c8c9463373b70eb4a2dcf1..c601168a76f8eb8e05c14a6d513a443d93363a81 100644 (file)
--- a/util/superiotool/README
+++ b/util/superiotool/README
@@ -11,14 +11,14 @@ Superiotool is a user-space utility which can
  - dump all register contents of the Super I/O chip, together with the
    default values as per datasheet (to make comparing the values easy).
 
-It is mainly used for LinuxBIOS development purposes (see linuxbios.org
-for details on LinuxBIOS), but it may also be useful for other things.
+It is mainly used for coreboot development purposes (see coreboot.org
+for details on coreboot), but it may also be useful for other things.
 
 
 Installation
 ------------
 
- $ svn co svn://linuxbios.org/repos/trunk/util/superiotool
+ $ svn co svn://coreboot.org/repos/trunk/util/superiotool
 
  $ cd superiotool
 
@@ -54,21 +54,21 @@ Typical usage of superiotool:
 Supported Super I/O Chips
 -------------------------
 
-Please see http://linuxbios.org/Superiotool#Supported_devices.
+Please see http://coreboot.org/Superiotool#Supported_devices.
 
 There's also a collection of sample register dumps from various Super I/O
 chips on that page. Please send further register dumps (either from a
-proprietary BIOS and/or from LinuxBIOS) to the LinuxBIOS mailing list
-(http://linuxbios.org/Mailinglist).
+proprietary BIOS and/or from coreboot) to the coreboot mailing list
+(http://coreboot.org/Mailinglist).
 
 
 Website and Mailing List
 ------------------------
 
-The main website is http://linuxbios.org/Superiotool.
+The main website is http://coreboot.org/Superiotool.
 
 For additional information, patches, and discussions, please join the
-LinuxBIOS mailing list at http://linuxbios.org/Mailinglist, where most
+coreboot mailing list at http://coreboot.org/Mailinglist, where most
 superiotool developers are subscribed.
 
 

diff --git a/util/superiotool/superiotool.8 b/util/superiotool/superiotool.8
index 401480abd5d142bcab80d81764f32f3a5190ab14..6bd3be0725bed331e3417bc49a990d7d80b6eed3 100644 (file)
--- a/util/superiotool/superiotool.8
+++ b/util/superiotool/superiotool.8
@@ -14,12 +14,12 @@ is a GPL'd user-space utility which can
  * dump all register contents of the Super I/O chip, together with the
    default values as per datasheet (to make comparing the values easy).
 .PP
-It is mainly used for LinuxBIOS development purposes (see linuxbios.org
-for details on LinuxBIOS), but it may also be useful for other things.
+It is mainly used for coreboot development purposes (see coreboot.org
+for details on coreboot), but it may also be useful for other things.
 .PP
 The list of supported Super I/O chips is available at:
 .br
-.B http://linuxbios.org/Superiotool#Supported_devices
+.B http://coreboot.org/Superiotool#Supported_devices
 .SH OPTIONS
 If no command line option is specified,
 .B superiotool
@@ -98,8 +98,8 @@ Show version information and exit.
 .B "\-h, \-\-help"
 Show a help text and exit.
 .SH BUGS
-Please report any bugs at http://tracker.linuxbios.org/trac/LinuxBIOS/
-or on the LinuxBIOS mailing list (http://linuxbios.org/Mailinglist).
+Please report any bugs at http://tracker.coreboot.org/trac/coreboot/
+or on the coreboot mailing list (http://coreboot.org/Mailinglist).
 .SH AUTHORS
 Please see the individual source code files and/or the README file.
 .SH LICENCE