Allow per-board setting of HT clock and width so

less than optimal PCB designs can still work reliably
with reduced clock.

Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5179 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

diff --git a/src/Kconfig b/src/Kconfig
index 0fae6216dd44554747c626d55d6b3f01748bac7e..75f50aa048af7b9badecc8f403ebef213c2cfa25 100644 (file)
--- a/src/Kconfig
+++ b/src/Kconfig
@@ -56,6 +56,78 @@ menu "Chipset"
 comment "CPU"
 source src/cpu/Kconfig
 comment "Northbridge"
+
+menu "HyperTransport Setup"
+       depends on (NORTHBRIDGE_AMD_AMDK8 || NORTHBRIDGE_AMD_AMDFAM10) && EXPERT
+
+choice
+       prompt "HyperTransport Frequency"
+       default LIMIT_HT_SPEED_AUTO
+       help
+         This option sets the maximum permissible HyperTransport link frequency.
+         Use of this option will only limit the autodetected HT frequency; it will not (and cannot) increase the frequency beyond the autodetected limits.
+         This is primarily used to work around poorly designed or laid out HT traces on certain motherboards.
+
+config LIMIT_HT_SPEED_200
+       bool "Limit HT frequency to 200MHz"
+config LIMIT_HT_SPEED_400
+       bool "Limit HT frequency to 400MHz"
+config LIMIT_HT_SPEED_600
+       bool "Limit HT frequency to 600MHz"
+config LIMIT_HT_SPEED_800
+       bool "Limit HT frequency to 800MHz"
+config LIMIT_HT_SPEED_1000
+       bool "Limit HT frequency to 1.0GHz"
+config LIMIT_HT_SPEED_1200
+       bool "Limit HT frequency to 1.2GHz"
+config LIMIT_HT_SPEED_1400
+       bool "Limit HT frequency to 1.4GHz"
+config LIMIT_HT_SPEED_1600
+       bool "Limit HT frequency to 1.6GHz"
+config LIMIT_HT_SPEED_1800
+        bool "Limit HT frequency to 1.6GHz"
+config LIMIT_HT_SPEED_2000
+        bool "Limit HT frequency to 2.0GHz"
+config LIMIT_HT_SPEED_2200
+        bool "Limit HT frequency to 2.2GHz"
+config LIMIT_HT_SPEED_2400
+        bool "Limit HT frequency to 2.4GHz"
+config LIMIT_HT_SPEED_2600
+        bool "Limit HT frequency to 2.6GHz"
+config LIMIT_HT_SPEED_AUTO
+       bool "Autodetect HT frequency"
+endchoice
+
+choice
+       prompt "HyperTransport Downlink Width"
+       default LIMIT_HT_DOWN_WIDTH_16
+       help
+         This option sets the maximum permissible HyperTransport link width.
+         Use of this option will only limit the autodetected HT width; it will not (and cannot) increase the width beyond the autodetected limits.
+         This is primarily used to work around poorly designed or laid out HT traces on certain motherboards.
+
+config LIMIT_HT_DOWN_WIDTH_8
+       bool "8 bits"
+config LIMIT_HT_DOWN_WIDTH_16
+       bool "16 bits"
+endchoice
+
+choice
+       prompt "HyperTransport Uplink Width"
+       default LIMIT_HT_UP_WIDTH_16
+       help
+         This option sets the maximum permissible HyperTransport link width.
+         Use of this option will only limit the autodetected HT width; it will not (and cannot) increase the width beyond the autodetected limits.
+         This is primarily used to work around poorly designed or laid out HT traces on certain motherboards.
+
+config LIMIT_HT_UP_WIDTH_8
+       bool "8 bits"
+config LIMIT_HT_UP_WIDTH_16
+       bool "16 bits"
+endchoice
+
+endmenu
+
 source src/northbridge/Kconfig
 comment "Southbridge"
 source src/southbridge/Kconfig

diff --git a/src/northbridge/amd/amdht/h3finit.c b/src/northbridge/amd/amdht/h3finit.c
index 98af59f679d1a2569269a98dd0add2527cf7fd2a..be55c063bb87f66bf212020b3c55d642a3df0470 100644 (file)
--- a/src/northbridge/amd/amdht/h3finit.c
+++ b/src/northbridge/amd/amdht/h3finit.c
@@ -1327,9 +1327,51 @@ void selectOptimalWidthAndFrequency(sMainData *pDat)
 
        for (i = 0; i < pDat->TotalLinks*2; i += 2)
        {
-               cbPCBFreqLimit = 0xFFFF;
+#if CONFIG_LIMIT_HT_SPEED_200
+               cbPCBFreqLimit = 0x0001;
+#elif CONFIG_LIMIT_HT_SPEED_300
+               cbPCBFreqLimit = 0x0003;
+#elif CONFIG_LIMIT_HT_SPEED_400
+               cbPCBFreqLimit = 0x0007;
+#elif CONFIG_LIMIT_HT_SPEED_500
+               cbPCBFreqLimit = 0x000F;
+#elif CONFIG_LIMIT_HT_SPEED_600
+               cbPCBFreqLimit = 0x001F;
+#elif CONFIG_LIMIT_HT_SPEED_800
+               cbPCBFreqLimit = 0x003F;
+#elif CONFIG_LIMIT_HT_SPEED_1000
+               cbPCBFreqLimit = 0x007F;
+#elif CONFIG_LIMIT_HT_SPEED_1200
+               cbPCBFreqLimit = 0x00FF;
+#elif CONFIG_LIMIT_HT_SPEED_1400
+               cbPCBFreqLimit = 0x01FF;
+#elif CONFIG_LIMIT_HT_SPEED_1600
+               cbPCBFreqLimit = 0x03FF;
+#elif CONFIG_LIMIT_HT_SPEED_1800
+               cbPCBFreqLimit = 0x07FF;
+#elif CONFIG_LIMIT_HT_SPEED_2000
+               cbPCBFreqLimit = 0x0FFF;
+#elif CONFIG_LIMIT_HT_SPEED_2200
+               cbPCBFreqLimit = 0x1FFF;
+#elif CONFIG_LIMIT_HT_SPEED_2400
+               cbPCBFreqLimit = 0x3FFF;
+#elif CONFIG_LIMIT_HT_SPEED_2600
+               cbPCBFreqLimit = 0x7FFF;
+#else
+               cbPCBFreqLimit = 0xFFFF;                // Maximum allowed by autoconfiguration
+#endif
+
+#if CONFIG_LIMIT_HT_DOWN_WIDTH_8
+               cbPCBABDownstreamWidth = 8;
+#else
                cbPCBABDownstreamWidth = 16;
+#endif
+
+#if CONFIG_LIMIT_HT_UP_WIDTH_8
+               cbPCBBAUpstreamWidth = 8;
+#else
                cbPCBBAUpstreamWidth = 16;
+#endif
 
                if ( (pDat->PortList[i].Type == PORTLIST_TYPE_CPU) && (pDat->PortList[i+1].Type == PORTLIST_TYPE_CPU))
                {