#define TRY_HIGH_FIRST 0
#endif
+#ifndef K8_HT_FREQ_1G_SUPPORT
+ #define K8_HT_FREQ_1G_SUPPORT 0
+#endif
+
+#ifndef CONFIG_MAX_CPUS_4_BUT_MORE_INSTALLED
+#define CONFIG_MAX_CPUS_4_BUT_MORE_INSTALLED 0
+#endif
+
static inline void print_linkn (const char *strval, uint8_t byteval)
{
+#if 1
print_debug(strval); print_debug_hex8(byteval); print_debug("\r\n");
+#endif
}
static void disable_probes(void)
freq_cap = pci_read_config16(dev, pos);
freq_cap &= ~(1 << HT_FREQ_VENDOR); /* Ignore Vendor HT frequencies */
- id = pci_read_config32(dev, 0);
-#if 0
- //is it coherent ht link?
- /* AMD 8131 Errata 48 */
- if (id == (PCI_VENDOR_ID_AMD | (PCI_DEVICE_ID_AMD_8131_PCIX << 16))) {
- freq_cap &= ~(1 << HT_FREQ_800Mhz);
- }
- /* AMD 8151 Errata 23 */
- if (id == (PCI_VENDOR_ID_AMD | (PCI_DEVICE_ID_AMD_8151_SYSCTRL << 16))) {
- freq_cap &= ~(1 << HT_FREQ_800Mhz);
- }
-#endif
/* AMD K8 Unsupported 1Ghz? */
+ id = pci_read_config32(dev, 0);
if (id == (PCI_VENDOR_ID_AMD | (0x1100 << 16))) {
freq_cap &= ~(1 << HT_FREQ_1000Mhz);
}
+
return freq_cap;
}
static uint8_t get_linkn_last_count(uint8_t byte)
{
- byte &= 0x3f;
+ byte &= 0x0f;
if(byte & 0x02) { byte &= 0xcf; byte |= 0x00; byte+=0x40; }
if(byte & 0x04) { byte &= 0xcf; byte |= 0x10; byte+=0x40; }
if(byte & 0x08) { byte &= 0xcf; byte |= 0x20; byte+=0x40; }
#if CONFIG_MAX_CPUS > 2
#if !CROSS_BAR_47_56
-static void setup_row_indirect_x(u8 temp, u8 source, u8 dest, u8 gateway)
+static void setup_row_indirect_x(u8 temp, u8 source, u8 dest)
#else
static void setup_row_indirect_x(u8 temp, u8 source, u8 dest, u8 gateway, u8 diff)
#endif
uint32_t val_s;
uint32_t val;
#if !CROSS_BAR_47_56
+ u8 gateway;
u8 diff;
+ if(source<dest) {
+ gateway = source + 2;
+ } else {
+ gateway = source - 2;
+ }
#endif
val_s = get_row(temp, source);
val = get_row(temp, gateway);
if(diff && (val_s!=(val&0xff)) ) { /* use another connect as response*/
val_s -= val & 0xff;
-#if CONFIG_MAX_CPUS > 4
+#if (CONFIG_MAX_CPUS > 4) || (CONFIG_MAX_CPUS_4_BUT_MORE_INSTALLED == 1)
uint8_t byte;
/* Some node have two links left
* don't worry we only have (2, (3 as source need to handle
}
#if !CROSS_BAR_47_56
-static void setup_row_indirect(u8 source, u8 dest, u8 gateway)
+static void setup_row_indirect(u8 source, u8 dest)
{
- setup_row_indirect_x(source, source, dest, gateway);
+ setup_row_indirect_x(source, source, dest);
}
#else
static void setup_row_indirect(u8 source, u8 dest, u8 gateway, u8 diff)
int i;
#if !CROSS_BAR_47_56
- for(i=0; i<num; i+=3) {
- setup_row_indirect(conn[i], conn[i+1],conn[i+2]);
+ for(i=0; i<num; i+=2) {
+ setup_row_indirect(conn[i], conn[i+1]);
#else
for(i=0; i<num; i+=4) {
setup_row_indirect(conn[i], conn[i+1],conn[i+2], conn[i+3]);
}
#if !CROSS_BAR_47_56
-static void setup_remote_row_indirect(u8 source, u8 dest, u8 gateway)
+static void setup_remote_row_indirect(u8 source, u8 dest)
{
- setup_row_indirect_x(7, source, dest, gateway);
+ setup_row_indirect_x(7, source, dest);
}
#else
static void setup_remote_row_indirect(u8 source, u8 dest, u8 gateway, u8 diff)
int i;
#if !CROSS_BAR_47_56
- for(i=0; i<num; i+=3) {
- setup_remote_row_indirect(conn[i], conn[i+1],conn[i+2]);
+ for(i=0; i<num; i+=2) {
+ setup_remote_row_indirect(conn[i], conn[i+1]);
#else
for(i=0; i<num; i+=4) {
setup_remote_row_indirect(conn[i], conn[i+1],conn[i+2], conn[i+3]);
setup_row_direct(0,1, byte);
setup_temp_row(0, 1);
- if (!check_connection(7)) {
- print_spew("No connection to Node 1.\r\n");
- result.nodes = 1;
- return result;
- }
+ check_connection(7);
/* We found 2 nodes so far */
val = pci_read_config32(NODE_HT(7), 0x6c);
setup_row_local(7,1);
setup_remote_row_direct(1, 0, byte);
-#if CONFIG_MAX_CPUS > 4
+#if (CONFIG_MAX_CPUS > 4) || (CONFIG_MAX_CPUS_4_BUT_MORE_INSTALLED == 1)
val = get_row(7,1);
byte = (val>>16) & 0xfe;
byte = get_linkn_last_count(byte);
#else
byte = get_linkn_last(byte); /* Max link to Node1*/
#endif
- print_linkn("-->(0,1) link=", byte);
+ print_linkn("\t-->(0,1) link=", byte);
setup_row_direct(0,1, byte);
setup_temp_row(0, 1);
- if (!check_connection(7)) {
- print_spew("No connection to Node 1.\r\n");
- result.nodes = 1;
- return result;
- }
+ check_connection(7);
/* We found 2 nodes so far */
val = pci_read_config32(NODE_HT(7), 0x6c);
byte = (val>>2) & 0x3; /* get default link on node7 to node0*/
- print_linkn("-->(1,0) link=", byte);
+ print_linkn("\t-->(1,0) link=", byte);
setup_row_local(7,1);
setup_remote_row_direct(1, 0, byte);
}
byte &= 3; /* bit [3,2] is count-1*/
print_linkn("(0,2) link=", byte);
setup_row_direct(0, 2, byte); /*(0,2) direct link done*/
- setup_temp_row(0, 2);
-
- if (!check_connection(7) ) {
- print_spew("No connection to Node 2.\r\n");
- result.nodes = 2;
- return result;
- }
/* We found 3 nodes so far. Now setup a temporary
* connection from node 0 to node 3 via node 1
byte = get_linkn_first(byte);
print_linkn("(1,3) link=", byte);
setup_row_direct(1,3,byte); /* (1, 3) direct link done*/
- setup_temp_row(1,3); /* temp. link between nodes 1 and 3 */
-
- if (!check_connection(7)) {
- print_spew("No connection to Node 3.\r\n");
- result.nodes = 2;
- return result;
- }
/* We found 4 nodes so far. Now setup all nodes for 4p */
+ // We need to make sure 0,2 and 1,3 link is set already
#if !CROSS_BAR_47_56
static const u8 conn4_1[] = {
- 0,3,2,
- 1,2,3,
+ 0,3,
+ 1,2,
};
#else
static const u8 conn4_1[] = {
setup_row_indirect_group(conn4_1, sizeof(conn4_1)/sizeof(conn4_1[0]));
setup_temp_row(0,2);
-
+ check_connection(7);
val = pci_read_config32(NODE_HT(7), 0x6c);
byte = (val>>2) & 0x3; /* get default link on 7 to 0*/
print_linkn("(2,0) link=", byte);
setup_row_local(7,2);
- setup_remote_row_direct(2, 0, byte);
+ setup_remote_row_direct(2, 0, byte); /* node 2 to node 0 direct link done */
setup_remote_node(2); /* Setup the regs on the remote node */
-#if !CROSS_BAR_47_56
- static const u8 conn4_2[] = {
- 2,1,0,
- };
-#else
- static const u8 conn4_2[] = {
- 2,1,0,1,
- };
-#endif
- setup_remote_row_indirect_group(conn4_2, sizeof(conn4_2)/sizeof(conn4_2[0]));
rename_temp_node(2); /* Rename Node 7 to Node 2 */
enable_routing(2); /* Enable routing on Node 2 */
setup_temp_row(0,1);
setup_temp_row(1,3);
+ check_connection(7);
val = pci_read_config32(NODE_HT(7), 0x6c);
byte = (val>>2) & 0x3; /* get default link on 7 to 1*/
print_linkn("(3,1) link=", byte);
setup_row_local(7,3);
- setup_remote_row_direct(3, 1, byte);
+ setup_remote_row_direct(3, 1, byte); /* node 3 to node 1 direct link done */
setup_remote_node(3); /* Setup the regs on the remote node */
-#if !CROSS_BAR_47_56
- static const u8 conn4_3[] = {
- 3,0,1,
- };
-#else
- static const u8 conn4_3[] = {
- 3,0,1,1,
- };
-#endif
- setup_remote_row_indirect_group(conn4_3, sizeof(conn4_3)/sizeof(conn4_3[0]));
-
/* We need to init link between 2, and 3 direct link */
val = get_row(2,2);
byte = ((val>>16) & 0xfe) - link_connection(2,0);
setup_temp_row(2,3);
check_connection(7); /* to 3*/
-#if CONFIG_MAX_CPUS > 4
+#if (CONFIG_MAX_CPUS > 4) || (CONFIG_MAX_CPUS_4_BUT_MORE_INSTALLED == 1)
/* We need to find out which link is to node3 */
-
if((byte>>2)==2) { /* one to node3, one to node0, one to node4*/
val = get_row(7,3);
- if((val>>16) == 1) { /* that link is to node4, because via node3 it has been set, recompute it*/
+ if((val>>16) == 1) { /* that link is to node4, because via node1 it has been set, recompute it*/
val = get_row(2,2);
byte = ((val>>16) & 0xfe) - link_connection(2,0);
byte = get_linkn_first(byte);
- print_linkn("-->(2,3) link=", byte);
+ print_linkn("\t-->(2,3) link=", byte);
setup_row_direct(2,3,byte);
setup_temp_row(2,3);
check_connection(7); /* to 3*/
print_linkn("(3,2) link=", byte);
setup_remote_row_direct(3,2, byte);
+#if (CONFIG_MAX_CPUS > 4) || (CONFIG_MAX_CPUS_4_BUT_MORE_INSTALLED == 1)
+ /* set link from 3 to 5 before enable it*/
+ val = get_row(7,3);
+ byte = ((val>>16) & 0xfe) - link_connection(7,2) - link_connection(7,1);
+ byte = get_linkn_last_count(byte);
+ if((byte>>2)==1) { /* We should have three coherent links on node 3 for 6p and above*/
+ byte &= 3; /*bit [3,2] is count-2*/
+ print_linkn("(3,5) link=", byte);
+ setup_remote_row_direct(3, 5, byte);
+ }
+
+ val = get_row(2,2);
+ byte = ((val>>16) & 0xfe) - link_connection(2,3) - link_connection(2,0);
+ byte = get_linkn_last_count(byte);
+
+ if((byte>>2)==1) { /* We should have three coherent link on node 2 for 6p and above*/
+ byte &= 3; /* bit [3,2] is count-2*/
+ print_linkn("(2,4) link=", byte);
+ setup_row_direct(2, 4, byte);
+ }
+#endif
+
+ //Beside 3, 1 is set, We need to make sure 3, 5 is set already in case has three link in 3
+#if !CROSS_BAR_47_56
+ static const u8 conn4_3[] = {
+ 3,0,
+ };
+#else
+ static const u8 conn4_3[] = {
+ 3,0,1,1,
+ };
+#endif
+ setup_remote_row_indirect_group(conn4_3, sizeof(conn4_3)/sizeof(conn4_3[0]));
+
/* ready to enable RT for Node 3 */
rename_temp_node(3);
enable_routing(3); /* enable routing on node 3 (temp.) */
+ // beside 2, 0 is set, We need to make sure 2, 4 link is set already in case has three link in 2
+#if !CROSS_BAR_47_56
+ static const u8 conn4_2[] = {
+ 2,1,
+ };
+#else
+ static const u8 conn4_2[] = {
+ 2,1,0,1,
+ };
+#endif
+ setup_row_indirect_group(conn4_2, sizeof(conn4_2)/sizeof(conn4_2[0]));
+
#if 0
/*We need to do sth to reverse work for setup_temp_row (0,1) (1,3) */
/* it will be done by clear_dead_links */
result.nodes=6;
result.needs_reset = needs_reset;
- /* Setup and check temporary connection from Node 0 to Node 4 via 2 */
- val = get_row(2,2);
- byte = ((val>>16) & 0xfe) - link_connection(2,3) - link_connection(2,0);
- byte = get_linkn_last_count(byte);
-
- if((byte>>2)==0) { /* We should have two coherent link on node 2 for 6p and above*/
- result.nodes = 4;
- return result;
- }
- byte &= 3; /* bit [3,2] is count-2*/
- print_linkn("(2,4) link=", byte);
- setup_row_direct(2, 4, byte);
-
/* Setup and check temporary connection from Node 0 to Node 4 through 2*/
- for(byte=0; byte<4; byte+=2) {
- setup_temp_row(byte,byte+2);
- }
+ val = get_row(2,2);
+ byte = ((val>>16) & 0xfe) - link_connection(2,3) - link_connection(2,0);
+ byte = get_linkn_last_count(byte);
- if (!check_connection(7) ) {
- print_spew("No connection to Node 4.\r\n");
- result.nodes = 4;
- return result;
- }
+ if((byte>>2)==0) { /* We should have three coherent link on node 2 for 6p and above*/
+ result.nodes = 4;
+ return result;
+ }
/* Setup and check temporary connection from Node 0 to Node 5 through 1, 3*/
- val = get_row(3,3);
- byte = ((val>>16) & 0xfe) - link_connection(3,2) - link_connection(3,1);
- byte = get_linkn_last_count(byte);
- if((byte>>2)==0) { /* We should have two coherent links on node 3 for 6p and above*/
- result.nodes = 4;
- return result;
- }
-
- byte &= 3; /*bit [3,2] is count-2*/
- print_linkn("(3,5) link=", byte);
- setup_row_direct(3, 5, byte);
-
- setup_temp_row(0,1); /* temp. link between nodes 0 and 1 */
- for(byte=0; byte<4; byte+=2) {
- setup_temp_row(byte+1,byte+3);
- }
-
- if (!check_connection(7)) {
- print_spew("No connection to Node 5.\r\n");
- result.nodes = 4;
- return result;
- }
+ /* set link from 3 to 5 before enable it*/
+ val = get_row(3,3);
+ byte = ((val>>16) & 0xfe) - link_connection(3,2) - link_connection(3,1);
+ byte = get_linkn_last_count(byte);
+ if((byte>>2)==0) { /* We should have three coherent links on node 3 for 6p and above*/
+ result.nodes = 4;
+ return result;
+ }
/* We found 6 nodes so far. Now setup all nodes for 6p */
#warning "FIXME we need to find out the correct gateway for 6p"
static const u8 conn6_1[] = {
#if !CROSS_BAR_47_56
- 0, 4, 2,
- 0, 5, 1,
- 1, 4, 3,
- 1, 5, 3,
- 2, 5, 3,
- 3, 4, 5,
+ 0, 4,
+ 0, 5,
+ 1, 4,
+ 1, 5,
+ 2, 5,
+ 3, 4,
#else
0, 4, 2, 0,
- 0, 5, 1, 1,
+ 0, 5, 2, 1,
1, 4, 3, 1,
1, 5, 3, 0,
2, 5, 3, 0,
for(byte=0; byte<4; byte+=2) {
setup_temp_row(byte,byte+2);
}
+ check_connection(7);
val = pci_read_config32(NODE_HT(7), 0x6c);
byte = (val>>2) & 0x3; /*get default link on 7 to 2*/
print_linkn("(4,2) link=", byte);
setup_row_local(7,4);
setup_remote_row_direct(4, 2, byte);
setup_remote_node(4); /* Setup the regs on the remote node */
+
/* Set indirect connection to 0, to 3 */
+ //we only need to set 4,0 here
static const u8 conn6_2[] = {
#if !CROSS_BAR_47_56
- 4, 0, 2,
- 4, 1, 2,
- 4, 3, 2,
+ 4, 0,
#else
4, 0, 2, 0,
- 4, 1, 2, 0,
- 4, 3, 2, 0,
- 4, 5, 2, 0,
#endif
};
for(byte=0; byte<4; byte+=2) {
setup_temp_row(byte+1,byte+3);
}
+ check_connection(7);
val = pci_read_config32(NODE_HT(7), 0x6c);
byte = (val>>2) & 0x3; /* get default link on 7 to 3*/
val = get_row(4,4);
byte = ((val>>16) & 0xfe) - link_connection(4,2);
byte = get_linkn_first(byte);
- print_linkn("-->(4,5) link=", byte);
+ print_linkn("\t-->(4,5) link=", byte);
setup_row_direct(4,5,byte);
setup_temp_row(4,5);
check_connection(7); /* to 5*/
byte = (val>>2) & 0x3; /* get default link on 7 to 4*/
print_linkn("(5,4) link=", byte);
setup_remote_row_direct(5,4, byte);
+
+ //init 5, 7 here
+ val = get_row(7,5);
+ byte = ((val>>16) & 0xfe) - link_connection(7,4) - link_connection(7,3);
+ byte = get_linkn_last_count(byte);
+ if((byte>>2)==1) { /* We should have three coherent links on node 5 for 6p and above*/
+ byte &= 3; /*bit [3,2] is count-2*/
+ print_linkn("(5,7) link=", byte);
+ setup_remote_row_direct(5, 7, byte);
+ }
+
+ //init 4,6 here
+ val = get_row(4,4);
+ byte = ((val>>16) & 0xfe) - link_connection(4,5) - link_connection(4,2);
+ byte = get_linkn_last_count(byte);
+
+ if((byte>>2)==1) { /* We should have three coherent link on node 4 for 6p and above*/
+ byte &= 3; /* bit [3,2] is count-2*/
+ print_linkn("(4,6) link=", byte);
+ setup_row_direct(4, 6, byte);
+ }
+
#endif
+ //We need to set 5,0 here only, We need to set up 5, 7 to make 5,0
/* Set indirect connection to 0, to 3 for indirect we will use clockwise routing */
static const u8 conn6_3[] = {
#if !CROSS_BAR_47_56
- 5, 0, 4,
- 5, 2, 4,
- 5, 1, 3,
+ 5, 0,
#else
5, 0, 3, 0,
- 5, 2, 3, 0,
- 5, 1, 3, 0,
- 5, 4, 3, 0,
#endif
};
rename_temp_node(5);
enable_routing(5); /* enable routing on node 5 (temp.) */
+ static const u8 conn6_4[] = {
+#if !CROSS_BAR_47_56
+ 4, 1,
+ 4, 3,
+
+ 5, 2,
+ 5, 1,
+
+#else
+ 4, 1, 2, 0,
+ 4, 3, 2, 0,
+ 4, 5, 2, 0,
+
+ 5, 2, 3, 0,
+ 5, 1, 3, 0,
+ 5, 4, 3, 0,
+
+#endif
+ };
+
+ setup_row_indirect_group(conn6_4, sizeof(conn6_4)/sizeof(conn6_4[0]));
+
#if 0
/* We need to do sth about reverse about setup_temp_row (0,1), (2,4), (1, 3), (3,5)
* It will be done by clear_dead_links
/* Setup and check temporary connection from Node 0 to Node 6 via 2 and 4 to 7 */
val = get_row(4,4);
-#if !CROSS_BAR_47_56
- byte = ((val>>16) & 0xfe) - link_connection(4,5) - link_connection(4,2);
-#else
+#if CROSS_BAR_47_56
byte = ((val>>16) & 0xfe) - link_connection(4,2);
+#else
+ byte = ((val>>16) & 0xfe) - link_connection(4,5) - link_connection(4,2);
+ byte = get_linkn_last_count(byte); /* Max link to 6*/
+ if((byte>>2)==0) { /* We should have two or three coherent links on node 4 for 8p*/
+ result.nodes = 6;
+ return result;
+ }
#endif
-#if TRY_HIGH_FIRST == 1
+#if CROSS_BAR_47_56
byte = get_linkn_last_count(byte); /* Max link to 6*/
- if((byte>>2)==0) { /* We should have two or three coherent links on node 4 for 8p*/
+ if((byte>>2)<2) { /* We should have two or three coherent links on node 4 for 8p*/
result.nodes = 6;
return result;
}
+#if TRY_HIGH_FIRST == 1
byte &= 3; /* bit [3,2] is count-1 or 2*/
#else
+ byte = ((val>>16) & 0xfe) - link_connection(4,2);
byte = get_linkn_first(byte); /*Min link to 6*/
#endif
print_linkn("(4,6) link=", byte);
setup_row_direct(4, 6, byte);
+#endif
- /* Setup and check temporary connection from Node 0 to Node 6 through 2, and 4*/
- for(byte=0; byte<6; byte+=2) {
- setup_temp_row(byte,byte+2);
- }
-
- if (!check_connection(7) ) {
- print_spew("No connection to Node 6.\r\n");
- result.nodes = 6;
- return result;
- }
#if !CROSS_BAR_47_56
/* Setup and check temporary connection from Node 0 to Node 7 through 1, 3, 5*/
- val = get_row(5,5);
- byte = ((val>>16) & 0xfe) - link_connection(5,4) - link_connection(5,3);
- byte = get_linkn_first(byte);
- print_linkn("(5,7) link=", byte);
- setup_row_direct(5, 7, byte);
-
- setup_temp_row(0,1); /* temp. link between nodes 0 and 1 */
- for(byte=0; byte<6; byte+=2) {
- setup_temp_row(byte+1,byte+3);
- }
-#else
- val = get_row(4,4);
- byte = ((val>>16) & 0xfe) - link_connection(4,2) - link_connection(4,6);
- byte = get_linkn_first(byte);
- print_linkn("(4,7) link=", byte);
- setup_row_direct(4, 7, byte);
-
- /* Setup and check temporary connection from Node 0 to Node 7 through 2, and 4*/
- for(byte=0; byte<4; byte+=2) {
- setup_temp_row(byte,byte+2);
- }
- setup_temp_row(4, 7);
-
+ val = get_row(5,5);
+ byte = ((val>>16) & 0xfe) - link_connection(5,4) - link_connection(5,3);
+ byte = get_linkn_last_count(byte);
+ if((byte>>2)==0) { /* We should have three coherent links on node 5 for 6p and above*/
+ result.nodes = 6;
+ return result;
+ }
#endif
- if (!check_connection(7)) {
- print_spew("No connection to Node 7.\r\n");
- result.nodes = 6;
- return result;
- }
-
-
/* We found 8 nodes so far. Now setup all nodes for 8p */
static const u8 conn8_1[] = {
#if !CROSS_BAR_47_56
- 0, 6, 2,
- /*0, 7, 1,*/
- 1, 6, 3,
- /*1, 7, 3,*/
- 2, 6, 4,
- /*2, 7, 3,*/
- 3, 6, 5,
- /*3, 7, 5,*/
- /*4, 7, 5,*/
+ 0, 6,
+ /*0, 7,*/
+ 1, 6,
+ /*1, 7,*/
+ 2, 6,
+ /*2, 7,*/
+ 3, 6,
+ /*3, 7,*/
+ /*4, 7,*/
#else
0, 6, 2, 0,
/*0, 7, 2, 0,*/
for(byte=0; byte<6; byte+=2) {
setup_temp_row(byte,byte+2);
}
+ check_connection(7);
val = pci_read_config32(NODE_HT(7), 0x6c);
byte = (val>>2) & 0x3; /* get default link on 7 to 4*/
print_linkn("(6,4) link=", byte);
#warning "FIXME we need to find out the correct gateway for 8p"
static const u8 conn8_2[] = {
#if !CROSS_BAR_47_56
- 6, 0, 4,
- 6, 1, 4,
- 6, 2, 4,
- 6, 3, 4,
- 6, 5, 4,
+ 6, 0,
#else
6, 0, 4, 0,
- /*6, 1, 5, 0,*/
- 6, 2, 4, 0,
- /*6, 3, 5, 0,*/
#endif
};
setup_remote_row_indirect_group(conn8_2, sizeof(conn8_2)/sizeof(conn8_2[0]));
+
+#if CROSS_BAR_47_56
+ //init 5, 6 here
+ /* here init 5, 6 */
+ /* Setup and check temporary connection from Node 0 to Node 5 through 1, 3, 5*/
+ val = get_row(5,5);
+ byte = ((val>>16) & 0xfe) - link_connection(5,3);
+#if TRY_HIGH_FIRST == 1
+ byte = get_linkn_last(byte);
+#else
+ byte = get_linkn_first(byte);
+#endif
+ print_linkn("(5,6) link=", byte);
+ setup_row_direct(5, 6, byte);
+
+ setup_temp_row(0,1); /* temp. link between nodes 0 and 1 */
+ for(byte=0; byte<4; byte+=2) {
+ setup_temp_row(byte+1,byte+3);
+ }
+ setup_temp_row(5,6);
+
+ check_connection(7);
+
+ val = get_row(7,6); // to chect it if it is node6 before renaming
+ if( (val>>16) == 1) { // it is real node 7 so swap it
+ /* We need to recompute link to 6 */
+ val = get_row(5,5);
+ byte = ((val>>16) & 0xfe) - link_connection(5,3);
+#if TRY_HIGH_FIRST == 1
+ byte = get_linkn_first(byte);
+#else
+ byte = get_linkn_last(byte);
+#endif
+ print_linkn("\t-->(5,6) link=", byte);
+ setup_row_direct(5, 6, byte);
+#if 0
+ setup_temp_row(0,1); /* temp. link between nodes 0 and 1 */
+ for(byte=0; byte<4; byte+=2) {
+ setup_temp_row(byte+1,byte+3);
+ }
+#endif
+ setup_temp_row(5,6);
+
+ check_connection(7);
+ }
+ val = pci_read_config32(NODE_HT(7), 0x6c);
+ byte = (val>>2) & 0x3; /* get default link on 7 to 5*/
+ print_linkn("(6,5) link=", byte);
+ setup_remote_row_direct(6, 5, byte);
+ /*Till now 56, 65 done */
+#endif
rename_temp_node(6);
enable_routing(6);
setup_temp_row(byte+1,byte+3);
}
+ check_connection(7);
+
val = pci_read_config32(NODE_HT(7), 0x6c);
byte = (val>>2) & 0x3; /* get default link on 7 to 5*/
print_linkn("(7,5) link=", byte);
setup_remote_row_direct(7, 5, byte);
#else
+ val = get_row(4,4);
+ byte = ((val>>16) & 0xfe) - link_connection(4,2) - link_connection(4,6);
+ byte = get_linkn_first(byte);
+ print_linkn("(4,7) link=", byte);
+ setup_row_direct(4, 7, byte);
+
+ /* Setup and check temporary connection from Node 0 to Node 7 through 2, and 4*/
for(byte=0; byte<4; byte+=2) {
setup_temp_row(byte,byte+2);
}
- setup_temp_row(4,7);
+
+ check_connection(7);
+
val = pci_read_config32(NODE_HT(7), 0x6c);
byte = (val>>2) & 0x3; /* get default link on 7 to 4*/
print_linkn("(7,4) link=", byte);
/* here init 5, 7 */
/* Setup and check temporary connection from Node 0 to Node 5 through 1, 3, 5*/
val = get_row(5,5);
- byte = ((val>>16) & 0xfe) - link_connection(5,3);
- byte = get_linkn_last(byte);
+ byte = ((val>>16) & 0xfe) - link_connection(5,3) - link_connection(5,6);
+ byte = get_linkn_first(byte);
print_linkn("(5,7) link=", byte);
setup_row_direct(5, 7, byte);
setup_temp_row(0,1); /* temp. link between nodes 0 and 1 */
- for(byte=0; byte<6; byte+=2) {
+ for(byte=0; byte<4; byte+=2) {
setup_temp_row(byte+1,byte+3);
}
- if (!check_connection(7)) {
- /* We need to recompute link to 7 */
- val = get_row(5,5);
- byte = ((val>>16) & 0xfe) - link_connection(5,3);
- byte = get_linkn_first(byte);
+ check_connection(7);
- print_linkn("-->(5,7) link=", byte);
- setup_row_direct(5, 7, byte);
-#if 0
- setup_temp_row(0,1); /* temp. link between nodes 0 and 1 */
- for(byte=0; byte<6; byte+=2) {
- setup_temp_row(byte+1,byte+3);
- }
-#else
- setup_temp_row(5,7);
-#endif
- check_connection(7);
- }
val = pci_read_config32(NODE_HT(7), 0x6c);
byte = (val>>2) & 0x3; /* get default link on 7 to 5*/
print_linkn("(7,5) link=", byte);
setup_remote_row_direct(7, 5, byte);
/*Till now 57, 75 done */
- /* init init 5, 6 */
- val = get_row(5,5);
- byte = ((val>>16) & 0xfe) - link_connection(5,3) - link_connection(5,7);
- byte = get_linkn_first(byte);
- print_linkn("(5,6) link=", byte);
- setup_row_direct(5, 6, byte);
-
- /* init 6,7 */
- val = get_row(6,6);
- byte = ((val>>16) & 0xfe) - link_connection(6,4);
- byte = get_linkn_last(byte);
- print_linkn("(6,7) link=", byte);
- setup_row_direct(6, 7, byte);
-
- for(byte=0; byte<6; byte+=2) {
- setup_temp_row(byte,byte+2);
- }
- setup_temp_row(6,7);
-
- if (!check_connection(7)) {
- /* We need to recompute link to 7 */
- val = get_row(6,6);
- byte = ((val>>16) & 0xfe) - link_connection(6,4);
- byte = get_linkn_first(byte);
- print_linkn("-->(6,7) link=", byte);
-
- setup_row_direct(6, 7, byte);
-#if 0
- for(byte=0; byte<6; byte+=2) {
- setup_temp_row(byte,byte+2); /* temp. link between nodes 0 and 2 */
- }
#endif
- setup_temp_row(6,7);
- check_connection(7);
- }
- val = pci_read_config32(NODE_HT(7), 0x6c);
- byte = (val>>2) & 0x3; /* get default link on 7 to 6*/
- print_linkn("(7,6) link=", byte);
-
- setup_remote_row_direct(7, 6, byte);
- /* Till now 67, 76 done*/
-
- /* init 6,5 */
- val = get_row(6,6);
- byte = ((val>>16) & 0xfe) - link_connection(6,4) - link_connection(6,7);
- byte = get_linkn_first(byte);
- print_linkn("(6,5) link=", byte);
- setup_row_direct(6, 5, byte);
-#endif
-
-#if !CROSS_BAR_47_56
/* We need to init link between 6, and 7 direct link */
val = get_row(6,6);
+#if !CROSS_BAR_47_56
byte = ((val>>16) & 0xfe) - link_connection(6,4);
+#else
+ byte = ((val>>16) & 0xfe) - link_connection(6,4) - link_connection(6,5);
+#endif
byte = get_linkn_first(byte);
print_linkn("(6,7) link=", byte);
setup_row_direct(6,7, byte);
val = get_row(7,7);
+#if !CROSS_BAR_47_56
byte = ((val>>16) & 0xfe) - link_connection(7,5);
+#else
+ byte = ((val>>16) & 0xfe) - link_connection(7,5) - link_connection(7,4);
+#endif
byte = get_linkn_first(byte);
print_linkn("(7,6) link=", byte);
setup_row_direct(7,6, byte);
-#endif
/* Set indirect connection to 0, to 3 for indirect we will use clockwise routing */
static const u8 conn8_3[] = {
#if !CROSS_BAR_47_56
- 0, 7, 1, /* restore it*/
- 1, 7, 3,
- 2, 7, 3,
- 3, 7, 5,
- 4, 7, 5,
-
- 7, 0, 6,
- 7, 1, 5,
- 7, 2, 6,
- 7, 3, 5,
- 7, 4, 6,
+ 0, 7, /* restore it*/
+ 1, 7,
+ 2, 7,
+ 3, 7,
+ 4, 7,
+
+ 6, 1,
+ 6, 2,
+ 6, 3,
+ 6, 5,
+
+ 7, 0,
+ 7, 1,
+ 7, 2,
+ 7, 3,
+ 7, 4,
#else
0, 7, 2, 0, /* restore it*/
1, 7, 3, 0,
2, 7, 4, 0,
3, 7, 5, 0,
-
- 6, 1, 5, 0, /*???*/
- 6, 3, 5, 0, /*???*/
-
+
+ 6, 1, 5, 0,
+ 6, 2, 4, 0,
+ 6, 3, 5, 0,
+
7, 0, 4, 0,
7, 1, 5, 0,
7, 2, 4, 0,
7, 3, 5, 0,
- 4, 5, 7, 0,
- 5, 4, 6, 0,
+
+ 4, 5, 6, 1,
+ 5, 4, 7, 1,
#endif
};
result = setup_smp2();
#if CONFIG_MAX_CPUS > 2
- if(result.nodes == 2 )
+ if(result.nodes == 2)
result = setup_smp4(result.needs_reset);
#endif
}
}
- else {
+ else {
uint32_t cmd_ref;
/* Errata 98
* Set Clk Ramp Hystersis to 7
projects / coreboot.git / commitdiff