--- /dev/null
+/*****************************************************************************\
+ * lbtable.c
+ *****************************************************************************
+ * Copyright (C) 2002-2005 The Regents of the University of California.
+ * Produced at the Lawrence Livermore National Laboratory.
+ * Written by Dave Peterson <dsp@llnl.gov> <dave_peterson@pobox.com>
+ * and Stefan Reinauer <stepan@openbios.org>.
+ * UCRL-CODE-2003-012
+ * All rights reserved.
+ *
+ * This file is part of nvramtool, a utility for reading/writing coreboot
+ * parameters and displaying information from the coreboot table.
+ * For details, see http://coreboot.org/nvramtool.
+ *
+ * Please also read the file DISCLAIMER which is included in this software
+ * distribution.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (as published by the
+ * Free Software Foundation) version 2, dated June 1991.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the IMPLIED WARRANTY OF
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the terms and
+ * conditions of the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+\*****************************************************************************/
+
+#include <arpa/inet.h>
+#include <string.h>
+#include <sys/mman.h>
+#include "common.h"
+#include "coreboot_tables.h"
+#include "ip_checksum.h"
+#include "lbtable.h"
+#include "layout.h"
+#include "cmos_lowlevel.h"
+#include "hexdump.h"
+#include "cbfs.h"
+
+static void process_cmos_table(void);
+static void get_cmos_checksum_info(void);
+static void try_convert_checksum_layout(cmos_checksum_layout_t * layout);
+static void try_add_cmos_table_enum(cmos_enum_t * cmos_enum);
+static void try_add_cmos_table_entry(cmos_entry_t * cmos_entry);
+static const struct cmos_entries *first_cmos_table_entry(void);
+static const struct cmos_entries *next_cmos_table_entry(const struct
+ cmos_entries *last);
+static const struct cmos_enums *first_cmos_table_enum(void);
+static const struct cmos_enums *next_cmos_table_enum
+ (const struct cmos_enums *last);
+static const struct lb_record *first_cmos_rec(uint32_t tag);
+static const struct lb_record *next_cmos_rec(const struct lb_record *last,
+ uint32_t tag);
+
+/* The CMOS option table is located within the coreboot table. It tells us
+ * where the CMOS parameters are located in the nonvolatile RAM.
+ */
+static const struct cmos_option_table *cmos_table = NULL;
+
+void process_layout(void)
+{
+ if ((cmos_table) == NULL) {
+ fprintf(stderr,
+ "%s: CMOS option table not found in coreboot table. "
+ "Apparently, the coreboot installed on this system was "
+ "built without specifying CONFIG_HAVE_OPTION_TABLE.\n",
+ prog_name);
+ exit(1);
+ }
+
+ process_cmos_table();
+ get_cmos_checksum_info();
+}
+
+void get_layout_from_cbfs_file(void)
+{
+ uint32_t len;
+ cmos_table = cbfs_find_file("cmos_layout.bin", CBFS_COMPONENT_CMOS_LAYOUT, &len);
+ process_layout();
+}
+
+/****************************************************************************
+ * process_cmos_table
+ *
+ * Extract layout information from the CMOS option table and store it in our
+ * internal repository.
+ ****************************************************************************/
+static void process_cmos_table(void)
+{
+ const struct cmos_enums *p;
+ const struct cmos_entries *q;
+ cmos_enum_t cmos_enum;
+ cmos_entry_t cmos_entry;
+
+ /* First add the enums. */
+ for (p = first_cmos_table_enum(); p != NULL;
+ p = next_cmos_table_enum(p)) {
+ cmos_enum.config_id = p->config_id;
+ cmos_enum.value = p->value;
+ strncpy(cmos_enum.text, (char *)p->text, CMOS_MAX_TEXT_LENGTH);
+ cmos_enum.text[CMOS_MAX_TEXT_LENGTH] = '\0';
+ try_add_cmos_table_enum(&cmos_enum);
+ }
+
+ /* Now add the entries. We must add the entries after the enums because
+ * the entries are sanity checked against the enums as they are added.
+ */
+ for (q = first_cmos_table_entry(); q != NULL;
+ q = next_cmos_table_entry(q)) {
+ cmos_entry.bit = q->bit;
+ cmos_entry.length = q->length;
+
+ switch (q->config) {
+ case 'e':
+ cmos_entry.config = CMOS_ENTRY_ENUM;
+ break;
+
+ case 'h':
+ cmos_entry.config = CMOS_ENTRY_HEX;
+ break;
+
+ case 'r':
+ cmos_entry.config = CMOS_ENTRY_RESERVED;
+ break;
+
+ case 's':
+ cmos_entry.config = CMOS_ENTRY_STRING;
+ break;
+
+ default:
+ fprintf(stderr,
+ "%s: Entry in CMOS option table has unknown config "
+ "value.\n", prog_name);
+ exit(1);
+ }
+
+ cmos_entry.config_id = q->config_id;
+ strncpy(cmos_entry.name, (char *)q->name, CMOS_MAX_NAME_LENGTH);
+ cmos_entry.name[CMOS_MAX_NAME_LENGTH] = '\0';
+ try_add_cmos_table_entry(&cmos_entry);
+ }
+}
+
+/****************************************************************************
+ * get_cmos_checksum_info
+ *
+ * Get layout information for CMOS checksum.
+ ****************************************************************************/
+static void get_cmos_checksum_info(void)
+{
+ const cmos_entry_t *e;
+ struct cmos_checksum *checksum;
+ cmos_checksum_layout_t layout;
+ unsigned index, index2;
+
+ checksum = (struct cmos_checksum *)next_cmos_rec((const struct lb_record *)first_cmos_table_enum(), LB_TAG_OPTION_CHECKSUM);
+
+ if (checksum != NULL) { /* We are lucky. The coreboot table hints us to the checksum.
+ * We might have to check the type field here though.
+ */
+ layout.summed_area_start = checksum->range_start;
+ layout.summed_area_end = checksum->range_end;
+ layout.checksum_at = checksum->location;
+ try_convert_checksum_layout(&layout);
+ cmos_checksum_start = layout.summed_area_start;
+ cmos_checksum_end = layout.summed_area_end;
+ cmos_checksum_index = layout.checksum_at;
+ return;
+ }
+
+ if ((e = find_cmos_entry(checksum_param_name)) == NULL)
+ return;
+
+ /* If we get here, we are unlucky. The CMOS option table contains the
+ * location of the CMOS checksum. However, there is no information
+ * regarding which bytes of the CMOS area the checksum is computed over.
+ * Thus we have to hope our presets will be fine.
+ */
+
+ if (e->bit % 8) {
+ fprintf(stderr,
+ "%s: Error: CMOS checksum is not byte-aligned.\n",
+ prog_name);
+ exit(1);
+ }
+
+ index = e->bit / 8;
+ index2 = index + 1; /* The CMOS checksum occupies 16 bits. */
+
+ if (verify_cmos_byte_index(index) || verify_cmos_byte_index(index2)) {
+ fprintf(stderr,
+ "%s: Error: CMOS checksum location out of range.\n",
+ prog_name);
+ exit(1);
+ }
+
+ if (((index >= cmos_checksum_start) && (index <= cmos_checksum_end)) ||
+ (((index2) >= cmos_checksum_start)
+ && ((index2) <= cmos_checksum_end))) {
+ fprintf(stderr,
+ "%s: Error: CMOS checksum overlaps checksummed area.\n",
+ prog_name);
+ exit(1);
+ }
+
+ cmos_checksum_index = index;
+}
+
+/****************************************************************************
+ * try_convert_checksum_layout
+ *
+ * Perform sanity checking on CMOS checksum layout information and attempt to
+ * convert information from bit positions to byte positions. Return OK on
+ * success or an error code on failure.
+ ****************************************************************************/
+static void try_convert_checksum_layout(cmos_checksum_layout_t * layout)
+{
+ switch (checksum_layout_to_bytes(layout)) {
+ case OK:
+ return;
+
+ case LAYOUT_SUMMED_AREA_START_NOT_ALIGNED:
+ fprintf(stderr,
+ "%s: CMOS checksummed area start is not byte-aligned.\n",
+ prog_name);
+ break;
+
+ case LAYOUT_SUMMED_AREA_END_NOT_ALIGNED:
+ fprintf(stderr,
+ "%s: CMOS checksummed area end is not byte-aligned.\n",
+ prog_name);
+ break;
+
+ case LAYOUT_CHECKSUM_LOCATION_NOT_ALIGNED:
+ fprintf(stderr,
+ "%s: CMOS checksum location is not byte-aligned.\n",
+ prog_name);
+ break;
+
+ case LAYOUT_INVALID_SUMMED_AREA:
+ fprintf(stderr,
+ "%s: CMOS checksummed area end must be greater than "
+ "CMOS checksummed area start.\n", prog_name);
+ break;
+
+ case LAYOUT_CHECKSUM_OVERLAPS_SUMMED_AREA:
+ fprintf(stderr,
+ "%s: CMOS checksum overlaps checksummed area.\n",
+ prog_name);
+ break;
+
+ case LAYOUT_SUMMED_AREA_OUT_OF_RANGE:
+ fprintf(stderr,
+ "%s: CMOS checksummed area out of range.\n", prog_name);
+ break;
+
+ case LAYOUT_CHECKSUM_LOCATION_OUT_OF_RANGE:
+ fprintf(stderr,
+ "%s: CMOS checksum location out of range.\n",
+ prog_name);
+ break;
+
+ default:
+ BUG();
+ }
+
+ exit(1);
+}
+
+/****************************************************************************
+ * try_add_cmos_table_enum
+ *
+ * Attempt to add a CMOS enum to our internal repository. Exit with an error
+ * message on failure.
+ ****************************************************************************/
+static void try_add_cmos_table_enum(cmos_enum_t * cmos_enum)
+{
+ switch (add_cmos_enum(cmos_enum)) {
+ case OK:
+ return;
+
+ case LAYOUT_DUPLICATE_ENUM:
+ fprintf(stderr, "%s: Duplicate enum %s found in CMOS option "
+ "table.\n", prog_name, cmos_enum->text);
+ break;
+
+ default:
+ BUG();
+ }
+
+ exit(1);
+}
+
+/****************************************************************************
+ * try_add_cmos_table_entry
+ *
+ * Attempt to add a CMOS entry to our internal repository. Exit with an
+ * error message on failure.
+ ****************************************************************************/
+static void try_add_cmos_table_entry(cmos_entry_t * cmos_entry)
+{
+ const cmos_entry_t *conflict;
+
+ switch (add_cmos_entry(cmos_entry, &conflict)) {
+ case OK:
+ return;
+
+ case CMOS_AREA_OUT_OF_RANGE:
+ fprintf(stderr,
+ "%s: Bad CMOS option layout in CMOS option table entry "
+ "%s.\n", prog_name, cmos_entry->name);
+ break;
+
+ case CMOS_AREA_TOO_WIDE:
+ fprintf(stderr,
+ "%s: Area too wide for CMOS option table entry %s.\n",
+ prog_name, cmos_entry->name);
+ break;
+
+ case LAYOUT_ENTRY_OVERLAP:
+ fprintf(stderr,
+ "%s: CMOS option table entries %s and %s have overlapping "
+ "layouts.\n", prog_name, cmos_entry->name,
+ conflict->name);
+ break;
+
+ case LAYOUT_ENTRY_BAD_LENGTH:
+ /* Silently ignore entries with zero length. Although this should
+ * never happen in practice, we should handle the case in a
+ * reasonable manner just to be safe.
+ */
+ return;
+
+ default:
+ BUG();
+ }
+
+ exit(1);
+}
+
+/****************************************************************************
+ * first_cmos_table_entry
+ *
+ * Return a pointer to the first entry in the CMOS table that represents a
+ * CMOS parameter. Return NULL if CMOS table is empty.
+ ****************************************************************************/
+static const struct cmos_entries *first_cmos_table_entry(void)
+{
+ return (const struct cmos_entries *)first_cmos_rec(LB_TAG_OPTION);
+}
+
+/****************************************************************************
+ * next_cmos_table_entry
+ *
+ * Return a pointer to the next entry after 'last' in the CMOS table that
+ * represents a CMOS parameter. Return NULL if there are no more parameters.
+ ****************************************************************************/
+static const struct cmos_entries *next_cmos_table_entry(const struct
+ cmos_entries *last)
+{
+ return (const struct cmos_entries *)
+ next_cmos_rec((const struct lb_record *)last, LB_TAG_OPTION);
+}
+
+/****************************************************************************
+ * first_cmos_table_enum
+ *
+ * Return a pointer to the first entry in the CMOS table that represents a
+ * possible CMOS parameter value. Return NULL if the table does not contain
+ * any such entries.
+ ****************************************************************************/
+static const struct cmos_enums *first_cmos_table_enum(void)
+{
+ return (const struct cmos_enums *)first_cmos_rec(LB_TAG_OPTION_ENUM);
+}
+
+/****************************************************************************
+ * next_cmos_table_enum
+ *
+ * Return a pointer to the next entry after 'last' in the CMOS table that
+ * represents a possible CMOS parameter value. Return NULL if there are no
+ * more parameter values.
+ ****************************************************************************/
+static const struct cmos_enums *next_cmos_table_enum
+ (const struct cmos_enums *last) {
+ return (const struct cmos_enums *)
+ next_cmos_rec((const struct lb_record *)last, LB_TAG_OPTION_ENUM);
+}
+
+/****************************************************************************
+ * first_cmos_rec
+ *
+ * Return a pointer to the first entry in the CMOS table whose type matches
+ * 'tag'. Return NULL if CMOS table contains no such entry.
+ *
+ * Possible values for 'tag' are as follows:
+ *
+ * LB_TAG_OPTION: The entry represents a CMOS parameter.
+ * LB_TAG_OPTION_ENUM: The entry represents a possible value for a CMOS
+ * parameter of type 'enum'.
+ *
+ * The CMOS table tells us where in the nonvolatile RAM to look for CMOS
+ * parameter values and specifies their types as 'enum', 'hex', or
+ * 'reserved'.
+ ****************************************************************************/
+static const struct lb_record *first_cmos_rec(uint32_t tag)
+{
+ const char *p;
+ uint32_t bytes_processed, bytes_for_entries;
+ const struct lb_record *lbrec;
+
+ p = ((const char *)cmos_table) + cmos_table->header_length;
+ bytes_for_entries = cmos_table->size - cmos_table->header_length;
+
+ for (bytes_processed = 0;
+ bytes_processed < bytes_for_entries;
+ bytes_processed += lbrec->size) {
+ lbrec = (const struct lb_record *)&p[bytes_processed];
+
+ if (lbrec->tag == tag)
+ return lbrec;
+ }
+
+ return NULL;
+}
+
+/****************************************************************************
+ * next_cmos_rec
+ *
+ * Return a pointer to the next entry after 'last' in the CMOS table whose
+ * type matches 'tag'. Return NULL if the table contains no more entries of
+ * this type.
+ ****************************************************************************/
+static const struct lb_record *next_cmos_rec(const struct lb_record *last,
+ uint32_t tag)
+{
+ const char *p;
+ uint32_t bytes_processed, bytes_for_entries, last_offset;
+ const struct lb_record *lbrec;
+
+ p = ((const char *)cmos_table) + cmos_table->header_length;
+ bytes_for_entries = cmos_table->size - cmos_table->header_length;
+ last_offset = ((const char *)last) - p;
+
+ for (bytes_processed = last_offset + last->size;
+ bytes_processed < bytes_for_entries;
+ bytes_processed += lbrec->size) {
+ lbrec = (const struct lb_record *)&p[bytes_processed];
+
+ if (lbrec->tag == tag)
+ return lbrec;
+ }
+
+ return NULL;
+}
+
unsigned long end,
int *bad_header_count,
int *bad_table_count);
-static void process_cmos_table(void);
-static void get_cmos_checksum_info(void);
-static void try_convert_checksum_layout(cmos_checksum_layout_t * layout);
-static void try_add_cmos_table_enum(cmos_enum_t * cmos_enum);
-static void try_add_cmos_table_entry(cmos_entry_t * cmos_entry);
static const struct lb_record *find_lbrec(uint32_t tag);
static const char *lbrec_tag_to_str(uint32_t tag);
-static const struct cmos_entries *first_cmos_table_entry(void);
-static const struct cmos_entries *next_cmos_table_entry(const struct
- cmos_entries *last);
-static const struct cmos_enums *first_cmos_table_enum(void);
-static const struct cmos_enums *next_cmos_table_enum
- (const struct cmos_enums *last);
-static const struct lb_record *first_cmos_rec(uint32_t tag);
-static const struct lb_record *next_cmos_rec(const struct lb_record *last,
- uint32_t tag);
static void memory_print_fn(const struct lb_record *rec);
static void mainboard_print_fn(const struct lb_record *rec);
static void cmos_opt_table_print_fn(const struct lb_record *rec);
exit(1);
}
-static void process_layout(void)
-{
- if ((cmos_table) == NULL) {
- fprintf(stderr,
- "%s: CMOS option table not found in coreboot table. "
- "Apparently, the coreboot installed on this system was "
- "built without specifying CONFIG_HAVE_OPTION_TABLE.\n",
- prog_name);
- exit(1);
- }
-
- process_cmos_table();
- get_cmos_checksum_info();
-}
-
/****************************************************************************
* get_layout_from_cmos_table
*
process_layout();
}
-void get_layout_from_cbfs_file(void)
-{
- static struct lb_header header;
- u32 len;
- cmos_table = cbfs_find_file("cmos_layout.bin", CBFS_COMPONENT_CMOS_LAYOUT, &len);
- lbtable = &header;
- header.header_bytes = (u32)cmos_table-(u32)lbtable;
- header.table_bytes = ntohl(len);
- process_layout();
-}
-
/****************************************************************************
* dump_lbtable
*
return NULL;
}
-/****************************************************************************
- * process_cmos_table
- *
- * Extract layout information from the CMOS option table and store it in our
- * internal repository.
- ****************************************************************************/
-static void process_cmos_table(void)
-{
- const struct cmos_enums *p;
- const struct cmos_entries *q;
- cmos_enum_t cmos_enum;
- cmos_entry_t cmos_entry;
-
- /* First add the enums. */
- for (p = first_cmos_table_enum(); p != NULL;
- p = next_cmos_table_enum(p)) {
- cmos_enum.config_id = p->config_id;
- cmos_enum.value = p->value;
- strncpy(cmos_enum.text, (char *)p->text, CMOS_MAX_TEXT_LENGTH);
- cmos_enum.text[CMOS_MAX_TEXT_LENGTH] = '\0';
- try_add_cmos_table_enum(&cmos_enum);
- }
-
- /* Now add the entries. We must add the entries after the enums because
- * the entries are sanity checked against the enums as they are added.
- */
- for (q = first_cmos_table_entry(); q != NULL;
- q = next_cmos_table_entry(q)) {
- cmos_entry.bit = q->bit;
- cmos_entry.length = q->length;
-
- switch (q->config) {
- case 'e':
- cmos_entry.config = CMOS_ENTRY_ENUM;
- break;
-
- case 'h':
- cmos_entry.config = CMOS_ENTRY_HEX;
- break;
-
- case 'r':
- cmos_entry.config = CMOS_ENTRY_RESERVED;
- break;
-
- case 's':
- cmos_entry.config = CMOS_ENTRY_STRING;
- break;
-
- default:
- fprintf(stderr,
- "%s: Entry in CMOS option table has unknown config "
- "value.\n", prog_name);
- exit(1);
- }
-
- cmos_entry.config_id = q->config_id;
- strncpy(cmos_entry.name, (char *)q->name, CMOS_MAX_NAME_LENGTH);
- cmos_entry.name[CMOS_MAX_NAME_LENGTH] = '\0';
- try_add_cmos_table_entry(&cmos_entry);
- }
-}
-
-/****************************************************************************
- * get_cmos_checksum_info
- *
- * Get layout information for CMOS checksum.
- ****************************************************************************/
-static void get_cmos_checksum_info(void)
-{
- const cmos_entry_t *e;
- struct cmos_checksum *checksum;
- cmos_checksum_layout_t layout;
- unsigned index, index2;
-
- checksum = (struct cmos_checksum *)find_lbrec(LB_TAG_OPTION_CHECKSUM);
-
- if (checksum == NULL) {
- checksum = (struct cmos_checksum *)next_cmos_rec((const struct lb_record *)first_cmos_table_enum(), LB_TAG_OPTION_CHECKSUM);
- }
-
- if (checksum != NULL) { /* We are lucky. The coreboot table hints us to the checksum.
- * We might have to check the type field here though.
- */
- layout.summed_area_start = checksum->range_start;
- layout.summed_area_end = checksum->range_end;
- layout.checksum_at = checksum->location;
- try_convert_checksum_layout(&layout);
- cmos_checksum_start = layout.summed_area_start;
- cmos_checksum_end = layout.summed_area_end;
- cmos_checksum_index = layout.checksum_at;
- return;
- }
-
- if ((e = find_cmos_entry(checksum_param_name)) == NULL)
- return;
-
- /* If we get here, we are unlucky. The CMOS option table contains the
- * location of the CMOS checksum. However, there is no information
- * regarding which bytes of the CMOS area the checksum is computed over.
- * Thus we have to hope our presets will be fine.
- */
-
- if (e->bit % 8) {
- fprintf(stderr,
- "%s: Error: CMOS checksum is not byte-aligned.\n",
- prog_name);
- exit(1);
- }
-
- index = e->bit / 8;
- index2 = index + 1; /* The CMOS checksum occupies 16 bits. */
-
- if (verify_cmos_byte_index(index) || verify_cmos_byte_index(index2)) {
- fprintf(stderr,
- "%s: Error: CMOS checksum location out of range.\n",
- prog_name);
- exit(1);
- }
-
- if (((index >= cmos_checksum_start) && (index <= cmos_checksum_end)) ||
- (((index2) >= cmos_checksum_start)
- && ((index2) <= cmos_checksum_end))) {
- fprintf(stderr,
- "%s: Error: CMOS checksum overlaps checksummed area.\n",
- prog_name);
- exit(1);
- }
-
- cmos_checksum_index = index;
-}
-
-/****************************************************************************
- * try_convert_checksum_layout
- *
- * Perform sanity checking on CMOS checksum layout information and attempt to
- * convert information from bit positions to byte positions. Return OK on
- * success or an error code on failure.
- ****************************************************************************/
-static void try_convert_checksum_layout(cmos_checksum_layout_t * layout)
-{
- switch (checksum_layout_to_bytes(layout)) {
- case OK:
- return;
-
- case LAYOUT_SUMMED_AREA_START_NOT_ALIGNED:
- fprintf(stderr,
- "%s: CMOS checksummed area start is not byte-aligned.\n",
- prog_name);
- break;
-
- case LAYOUT_SUMMED_AREA_END_NOT_ALIGNED:
- fprintf(stderr,
- "%s: CMOS checksummed area end is not byte-aligned.\n",
- prog_name);
- break;
-
- case LAYOUT_CHECKSUM_LOCATION_NOT_ALIGNED:
- fprintf(stderr,
- "%s: CMOS checksum location is not byte-aligned.\n",
- prog_name);
- break;
-
- case LAYOUT_INVALID_SUMMED_AREA:
- fprintf(stderr,
- "%s: CMOS checksummed area end must be greater than "
- "CMOS checksummed area start.\n", prog_name);
- break;
-
- case LAYOUT_CHECKSUM_OVERLAPS_SUMMED_AREA:
- fprintf(stderr,
- "%s: CMOS checksum overlaps checksummed area.\n",
- prog_name);
- break;
-
- case LAYOUT_SUMMED_AREA_OUT_OF_RANGE:
- fprintf(stderr,
- "%s: CMOS checksummed area out of range.\n", prog_name);
- break;
-
- case LAYOUT_CHECKSUM_LOCATION_OUT_OF_RANGE:
- fprintf(stderr,
- "%s: CMOS checksum location out of range.\n",
- prog_name);
- break;
-
- default:
- BUG();
- }
-
- exit(1);
-}
-
-/****************************************************************************
- * try_add_cmos_table_enum
- *
- * Attempt to add a CMOS enum to our internal repository. Exit with an error
- * message on failure.
- ****************************************************************************/
-static void try_add_cmos_table_enum(cmos_enum_t * cmos_enum)
-{
- switch (add_cmos_enum(cmos_enum)) {
- case OK:
- return;
-
- case LAYOUT_DUPLICATE_ENUM:
- fprintf(stderr, "%s: Duplicate enum %s found in CMOS option "
- "table.\n", prog_name, cmos_enum->text);
- break;
-
- default:
- BUG();
- }
-
- exit(1);
-}
-
-/****************************************************************************
- * try_add_cmos_table_entry
- *
- * Attempt to add a CMOS entry to our internal repository. Exit with an
- * error message on failure.
- ****************************************************************************/
-static void try_add_cmos_table_entry(cmos_entry_t * cmos_entry)
-{
- const cmos_entry_t *conflict;
-
- switch (add_cmos_entry(cmos_entry, &conflict)) {
- case OK:
- return;
-
- case CMOS_AREA_OUT_OF_RANGE:
- fprintf(stderr,
- "%s: Bad CMOS option layout in CMOS option table entry "
- "%s.\n", prog_name, cmos_entry->name);
- break;
-
- case CMOS_AREA_TOO_WIDE:
- fprintf(stderr,
- "%s: Area too wide for CMOS option table entry %s.\n",
- prog_name, cmos_entry->name);
- break;
-
- case LAYOUT_ENTRY_OVERLAP:
- fprintf(stderr,
- "%s: CMOS option table entries %s and %s have overlapping "
- "layouts.\n", prog_name, cmos_entry->name,
- conflict->name);
- break;
-
- case LAYOUT_ENTRY_BAD_LENGTH:
- /* Silently ignore entries with zero length. Although this should
- * never happen in practice, we should handle the case in a
- * reasonable manner just to be safe.
- */
- return;
-
- default:
- BUG();
- }
-
- exit(1);
-}
-
/****************************************************************************
* find_lbrec
*
return "UNKNOWN";
}
-/****************************************************************************
- * first_cmos_table_entry
- *
- * Return a pointer to the first entry in the CMOS table that represents a
- * CMOS parameter. Return NULL if CMOS table is empty.
- ****************************************************************************/
-static const struct cmos_entries *first_cmos_table_entry(void)
-{
- return (const struct cmos_entries *)first_cmos_rec(LB_TAG_OPTION);
-}
-
-/****************************************************************************
- * next_cmos_table_entry
- *
- * Return a pointer to the next entry after 'last' in the CMOS table that
- * represents a CMOS parameter. Return NULL if there are no more parameters.
- ****************************************************************************/
-static const struct cmos_entries *next_cmos_table_entry(const struct
- cmos_entries *last)
-{
- return (const struct cmos_entries *)
- next_cmos_rec((const struct lb_record *)last, LB_TAG_OPTION);
-}
-
-/****************************************************************************
- * first_cmos_table_enum
- *
- * Return a pointer to the first entry in the CMOS table that represents a
- * possible CMOS parameter value. Return NULL if the table does not contain
- * any such entries.
- ****************************************************************************/
-static const struct cmos_enums *first_cmos_table_enum(void)
-{
- return (const struct cmos_enums *)first_cmos_rec(LB_TAG_OPTION_ENUM);
-}
-
-/****************************************************************************
- * next_cmos_table_enum
- *
- * Return a pointer to the next entry after 'last' in the CMOS table that
- * represents a possible CMOS parameter value. Return NULL if there are no
- * more parameter values.
- ****************************************************************************/
-static const struct cmos_enums *next_cmos_table_enum
- (const struct cmos_enums *last) {
- return (const struct cmos_enums *)
- next_cmos_rec((const struct lb_record *)last, LB_TAG_OPTION_ENUM);
-}
-
-/****************************************************************************
- * first_cmos_rec
- *
- * Return a pointer to the first entry in the CMOS table whose type matches
- * 'tag'. Return NULL if CMOS table contains no such entry.
- *
- * Possible values for 'tag' are as follows:
- *
- * LB_TAG_OPTION: The entry represents a CMOS parameter.
- * LB_TAG_OPTION_ENUM: The entry represents a possible value for a CMOS
- * parameter of type 'enum'.
- *
- * The CMOS table tells us where in the nonvolatile RAM to look for CMOS
- * parameter values and specifies their types as 'enum', 'hex', or
- * 'reserved'.
- ****************************************************************************/
-static const struct lb_record *first_cmos_rec(uint32_t tag)
-{
- const char *p;
- uint32_t bytes_processed, bytes_for_entries;
- const struct lb_record *lbrec;
-
- p = ((const char *)cmos_table) + cmos_table->header_length;
- bytes_for_entries = cmos_table->size - cmos_table->header_length;
-
- for (bytes_processed = 0;
- bytes_processed < bytes_for_entries;
- bytes_processed += lbrec->size) {
- lbrec = (const struct lb_record *)&p[bytes_processed];
-
- if (lbrec->tag == tag)
- return lbrec;
- }
-
- return NULL;
-}
-
-/****************************************************************************
- * next_cmos_rec
- *
- * Return a pointer to the next entry after 'last' in the CMOS table whose
- * type matches 'tag'. Return NULL if the table contains no more entries of
- * this type.
- ****************************************************************************/
-static const struct lb_record *next_cmos_rec(const struct lb_record *last,
- uint32_t tag)
-{
- const char *p;
- uint32_t bytes_processed, bytes_for_entries, last_offset;
- const struct lb_record *lbrec;
-
- p = ((const char *)cmos_table) + cmos_table->header_length;
- bytes_for_entries = cmos_table->size - cmos_table->header_length;
- last_offset = ((const char *)last) - p;
-
- for (bytes_processed = last_offset + last->size;
- bytes_processed < bytes_for_entries;
- bytes_processed += lbrec->size) {
- lbrec = (const struct lb_record *)&p[bytes_processed];
-
- if (lbrec->tag == tag)
- return lbrec;
- }
-
- return NULL;
-}
-
/****************************************************************************
* memory_print_fn
*
projects / coreboot.git / commitdiff