This patch is for winbond w83627DHG superio support in superiotool.

I have test that on my board, it works ;)

Signed-off-by: Bingxun Shi <bingxunshi@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3062 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

diff --git a/util/superiotool/winbond.c b/util/superiotool/winbond.c
index ebc65adad3ba4f94fe3038c48291eeb0826798de..9acf10a2fc7319b4ccf0fa7c01a12aa518797ed1 100644 (file)
--- a/util/superiotool/winbond.c
+++ b/util/superiotool/winbond.c
@@ -143,6 +143,57 @@ static const struct superio_registers reg_table[] = {
                {EOT}}},
 #endif
        {0xa02, "W83627DHG", {
+               {NOLDN, NULL,
+                       {0x02,0x20,0x21,0x22,0x23,0x24,0x25,0x26,0x27,0x28,
+                        0x29,0x2a,0x2b,0x2c,0x2d,0x2e,0x2f,EOT},
+                       {0x00,0xa0,NANA,0xff,0x00,MISC,0x00,MISC,RSVD,0x50,
+                        0x00,0x00,RSVD,0xe2,0x21,0x00,0x00,EOT}},
+               {0x0, "Floppy",
+                       {0x30,0x60,0x61,0x70,0x74,0xf0,0xf1,0xf2,0xf4,0xf5,
+                        EOT},
+                       {0x01,0x03,0xf0,0x06,0x02,0x8e,0x00,0xff,0x00,0x00,
+                        EOT}},
+               {0x1, "Parallel port",
+                       {0x30,0x60,0x61,0x70,0x74,0xf0,EOT},
+                       {0x01,0x03,0x78,0x07,0x04,0x3f,EOT}},
+               {0x2, "COM1",
+                       {0x30,0x60,0x61,0x70,0xf0,EOT},
+                       {0x01,0x03,0xf8,0x04,0x00,EOT}},
+               {0x3, "COM2",
+                       {0x30,0x60,0x61,0x70,0xf0,0xf1,EOT},
+                       {0x01,0x02,0xf8,0x03,0x00,0x00,EOT}},
+               {0x5, "Keyboard",
+                       {0x30,0x60,0x61,0x62,0x63,0x70,0x72,0xf0,EOT},
+                       {0x01,0x00,0x60,0x00,0x64,0x01,0x0c,0x83,EOT}},
+               {0x6, "Serial peripheral interface",
+                       {0x30,0x62,0x63,EOT},
+                       {0x00,0x00,0x00,EOT}},
+               {0x7, "GPIO 6",
+                       {0x30,0xf4,0xf5,0xf6,0xf7,EOT},
+                       {0x00,0xff,0x00,0x00,0x00,EOT}},
+               {0x8, "WDTO#, PLED",
+                       {0x30,0xf5,0xf6,0xf7,EOT},
+                       {0x00,0x00,0x00,0x00,EOT}},
+               {0x9, "GPIO 2, GPIO 3, GPIO 4, GPIO 5",
+                       {0x30,0xe0,0xe1,0xe2,0xe3,0xe4,0xe5,0xe6,0xe7,0xe8,
+                        0xe9,0xf0,0xf1,0xf2,0xf3,0xf4,0xf5,0xf6,0xf7,0xfe,
+                        EOT},
+                       {0x00,0xff,0x00,0x00,0xff,0x00,0x00,0x00,0x00,0x00,
+                        0x00,0xff,0x00,0x00,0x00,0xff,0x00,0x00,0x00,0x00,
+                        EOT}},
+               {0xa, "ACPI",
+                       {0x30,0x70,0xe0,0xe1,0xe2,0xe3,0xe4,0xe5,0xe6,0xe7,
+                        0xe8,0xe9,0xf2,0xf3,0xf4,0xf6,0xf7,0xfe,EOT},
+                       {0x00,0x00,0x01,0x00,0xff,0x08,0x00,RSVD,0x1c,0x00,
+                        RSVD,RSVD,0x7c,0x00,0x00,0x00,0x00,0x00,EOT}},
+               {0xb, "Hardware monitor",
+                       {0x30,0x60,0x61,0x70,0xf0,0xf1,0xf2,EOT},
+                       {0x00,0x00,0x00,0x00,0x81,0x00,0x00,EOT}},
+               {0xc, "PECI, SST",
+                       {0xe0,0xe1,0xe2,0xe3,0xe4,0xe5,0xe8,0xf1,0xfe,0xff,
+                        EOT},
+                       {0x00,0x48,0x48,0x48,0x48,0x00,0x00,0x48,0x00,0x00,
+                        EOT}},
                {EOT}}},
        {0x886, "W83627EHF/EF/EHG/EG", { /* sensors-detect: 0x8853 possible */
                {NOLDN, NULL,