* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
+/* Datasheet: Not available online, got it from ITE per request. */
+/* Status: Com1 is tested and works. */
+
#define IT8671F_FDC 0x00 /* Floppy */
#define IT8671F_SP1 0x01 /* Com1 */
#define IT8671F_SP2 0x02 /* Com2 */
#include "it8671f.h"
/* The base address is 0x3f0, 0x3bd, or 0x370, depending on config bytes. */
-#define SIO_BASE 0x3f0
-#define SIO_INDEX SIO_BASE
-#define SIO_DATA SIO_BASE+1
+#define SIO_BASE 0x3f0
+#define SIO_INDEX SIO_BASE
+#define SIO_DATA SIO_BASE+1
/* Global Configuration Registers. */
#define IT8671F_CONFIG_REG_CC 0x02 /* Configure Control (write-only). */
#define IT8671F_CONFIG_REG_SWSUSP 0x24 /* Software Suspend. */
#define IT8671F_CONFIGURATION_PORT 0x0279 /* Write-only. */
-#define IT8671F_WRITE_DATA_PORT 0x0A79 /* Write-only. */
/* Special values used for entering MB PnP mode. The first four bytes of
* each line determine the address port, the last four are data. */
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
+/* Datasheet: http://www.datasheet4u.com/html/I/T/8/IT8673F_ITE.pdf.html */
+/* Status: untested on real hardware, but it compiles. */
+
#define IT8673F_FDC 0x00 /* Floppy */
#define IT8673F_SP1 0x01 /* Com1 */
#define IT8673F_SP2 0x02 /* Com2 */
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
+/* Datasheet: http://www.ite.com.tw/product_info/PC/Brief-IT8712_2.asp */
+/* Status: untested on real hardware, but it compiles. */
+
#define IT8712F_FDC 0x00 /* Floppy */
#define IT8712F_SP1 0x01 /* Com1 */
#define IT8712F_SP2 0x02 /* Com2 */
#define IT8712F_CONFIG_REG_CLOCKSEL 0x23 /* Clock Selection. */
#define IT8712F_CONFIG_REG_SWSUSP 0x24 /* Software Suspend, Flash I/F. */
-#define IT8712F_CONFIGURATION_PORT 0x2E /* Write-only. */
+#define IT8712F_CONFIGURATION_PORT 0x2e /* Write-only. */
/* The content of IT8712F_CONFIG_REG_LDN (index 0x07) must be set to the
* LDN the register belongs to, before you can access the register. */
--- /dev/null
+config chip.h
+object superio.o
--- /dev/null
+/*
+ * Copyright (C) 2006 Uwe Hermann <uwe@hermann-uwe.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef _SUPERIO_ITE_IT8716F
+#define _SUPERIO_ITE_IT8716F
+
+#include <pc80/keyboard.h>
+#include <uart8250.h>
+
+extern struct chip_operations superio_ITE_it8716f_ops;
+
+struct superio_ITE_it8716f_config {
+ struct uart8250 com1, com2;
+ struct pc_keyboard keyboard;
+};
+
+#endif /* _SUPERIO_ITE_IT8716F */
+
--- /dev/null
+/*
+ * Copyright (C) 2006 Uwe Hermann <uwe@hermann-uwe.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/* Datasheet: http://www.ite.com.tw/product_info/PC/Brief-IT8716_2.asp */
+/* Status: untested on real hardware, but it compiles. */
+
+#define IT8716F_FDC 0x00 /* Floppy */
+#define IT8716F_SP1 0x01 /* Com1 */
+#define IT8716F_SP2 0x02 /* Com2 */
+#define IT8716F_PP 0x03 /* Parallel port */
+#define IT8716F_EC 0x04 /* Environment controller */
+#define IT8716F_KBCK 0x05 /* Keyboard */
+#define IT8716F_KBCM 0x06 /* Mouse */
+#define IT8716F_MIDI 0x08 /* MIDI port */
+#define IT8716F_GAME 0x09 /* GAME port */
+#define IT8716F_IR 0x0a /* Consumer IR */
+
--- /dev/null
+/*
+ * Copyright (C) 2006 Uwe Hermann <uwe@hermann-uwe.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <arch/romcc_io.h>
+#include "it8716f.h"
+
+/* The base address is 0x2e or 0x4e, depending on config bytes. */
+#define SIO_BASE 0x2e
+#define SIO_INDEX SIO_BASE
+#define SIO_DATA SIO_BASE+1
+
+/* Global Configuration Registers. */
+#define IT8716F_CONFIG_REG_CC 0x02 /* Configure Control (write-only). */
+#define IT8716F_CONFIG_REG_LDN 0x07 /* Logical Device Number. */
+#define IT8716F_CONFIG_REG_CONFIGSEL 0x22 /* Configuration Select. */
+#define IT8716F_CONFIG_REG_CLOCKSEL 0x23 /* Clock Selection. */
+#define IT8716F_CONFIG_REG_SWSUSP 0x24 /* Software Suspend, Flash I/F. */
+
+#define IT8716F_CONFIGURATION_PORT 0x2e /* Write-only. */
+
+/* The content of IT8716F_CONFIG_REG_LDN (index 0x07) must be set to the
+ * LDN the register belongs to, before you can access the register. */
+static void it8716f_sio_write(uint8_t ldn, uint8_t index, uint8_t value)
+{
+ outb(IT8716F_CONFIG_REG_LDN, SIO_BASE);
+ outb(ldn, SIO_DATA);
+ outb(index, SIO_BASE);
+ outb(value, SIO_DATA);
+}
+
+/* Enable the peripheral devices on the IT8716F Super IO chip. */
+static void it8716f_enable_serial(device_t dev, unsigned iobase)
+{
+ /* (1) Enter the configuration state (MB PnP mode). */
+
+ /* Perform MB PnP setup to put the SIO chip at 0x2e. */
+ /* Base address 0x2e: 0x87 0x01 0x55 0x55. */
+ /* Base address 0x4e: 0x87 0x01 0x55 0xaa. */
+ outb(0x87, IT8716F_CONFIGURATION_PORT);
+ outb(0x01, IT8716F_CONFIGURATION_PORT);
+ outb(0x55, IT8716F_CONFIGURATION_PORT);
+ outb(0x55, IT8716F_CONFIGURATION_PORT);
+
+ /* (2) Modify the data of configuration registers. */
+
+ /* Select the chip to configure (if there's more than one).
+ * Set bit 7 to select JP3=1, clear bit 7 to select JP3=0.
+ * If this register is not written, both chips are configured. */
+ /* it8716f_sio_write(0x00, IT8716F_CONFIG_REG_CONFIGSEL, 0x00); */
+
+ /* Enable all devices. */
+ it8716f_sio_write(IT8716F_FDC, 0x30, 0x1); /* Floppy */
+ it8716f_sio_write(IT8716F_SP1, 0x30, 0x1); /* Serial port 1 */
+ it8716f_sio_write(IT8716F_SP2, 0x30, 0x1); /* Serial port 2 */
+ it8716f_sio_write(IT8716F_PP, 0x30, 0x1); /* Parallel port */
+ it8716f_sio_write(IT8716F_EC, 0x30, 0x1); /* Environment controller */
+ it8716f_sio_write(IT8716F_KBCK, 0x30, 0x1); /* Keyboard */
+ it8716f_sio_write(IT8716F_KBCM, 0x30, 0x1); /* Mouse */
+ it8716f_sio_write(IT8716F_MIDI, 0x30, 0x1); /* MIDI port */
+ it8716f_sio_write(IT8716F_GAME, 0x30, 0x1); /* GAME port */
+ it8716f_sio_write(IT8716F_IR, 0x30, 0x1); /* Consumer IR */
+
+ /* Select 24MHz/48MHz CLKIN (set/clear bit 0). TODO: Needed? */
+ /* it8716f_sio_write(0x00, IT8716F_CONFIG_REG_CLOCKSEL, 0x00); */
+
+ /* Clear software suspend mode (clear bit 0). TODO: Needed? */
+ /* it8716f_sio_write(0x00, IT8716F_CONFIG_REG_SWSUSP, 0x00); */
+
+ /* (3) Exit the configuration state (MB PnP mode). */
+ it8716f_sio_write(0x00, IT8716F_CONFIG_REG_CC, 0x02);
+}
+
--- /dev/null
+/*
+ * Copyright (C) 2006 Uwe Hermann <uwe@hermann-uwe.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <uart8250.h>
+#include <pc80/keyboard.h>
+#include "chip.h"
+#include "it8716f.h"
+
+static void init(device_t dev)
+{
+ struct superio_ITE_it8716f_config *conf;
+ struct resource *res0, *res1;
+
+ if (!dev->enabled) {
+ return;
+ }
+
+ conf = dev->chip_info;
+
+ switch (dev->path.u.pnp.device) {
+ case IT8716F_FDC: /* TODO. */
+ break;
+ case IT8716F_SP1:
+ res0 = find_resource(dev, PNP_IDX_IO0);
+ init_uart8250(res0->base, &conf->com1);
+ break;
+ case IT8716F_SP2:
+ res0 = find_resource(dev, PNP_IDX_IO0);
+ init_uart8250(res0->base, &conf->com2);
+ break;
+ case IT8716F_PP: /* TODO. */
+ break;
+ case IT8716F_EC: /* TODO. */
+ break;
+ case IT8716F_KBCK:
+ res0 = find_resource(dev, PNP_IDX_IO0);
+ res1 = find_resource(dev, PNP_IDX_IO1);
+ init_pc_keyboard(res0->base, res1->base, &conf->keyboard);
+ break;
+ case IT8716F_KBCM: /* TODO. */
+ break;
+ case IT8716F_MIDI: /* TODO. */
+ break;
+ case IT8716F_GAME: /* TODO. */
+ break;
+ case IT8716F_IR: /* TODO. */
+ break;
+ }
+}
+
+static struct device_operations ops = {
+ .read_resources = pnp_read_resources,
+ .set_resources = pnp_set_resources,
+ .enable_resources = pnp_enable_resources,
+ .enable = pnp_enable,
+ .init = init,
+};
+
+/* TODO: FDC, PP, EC, KBCM, MIDI, GAME, IR. */
+static struct pnp_info pnp_dev_info[] = {
+ { &ops, IT8716F_SP1, PNP_IO0 | PNP_IRQ0, { 0x7f8, 0 }, },
+ { &ops, IT8716F_SP2, PNP_IO0 | PNP_IRQ0 | PNP_DRQ0 | PNP_DRQ1, { 0x7f8, 0 }, },
+ { &ops, IT8716F_KBCK, PNP_IO0 | PNP_IO1 | PNP_IRQ0, { 0x7f8, 0 }, { 0x7f8, 0x4}, },
+};
+
+static void enable_dev(struct device *dev)
+{
+ pnp_enable_devices(dev, &pnp_ops,
+ sizeof(pnp_dev_info)/sizeof(pnp_dev_info[0]), pnp_dev_info);
+}
+
+struct chip_operations superio_ITE_it8716f_ops = {
+ CHIP_NAME("ITE it8716f")
+ .enable_dev = enable_dev,
+};
+
projects / coreboot.git / commitdiff