--- /dev/null
+uses CONFIG_HAVE_MOVNTI
+default CONFIG_HAVE_MOVNTI=1
+
+dir /cpu/x86/tsc
+dir /cpu/x86/mtrr
+dir /cpu/x86/fpu
+dir /cpu/x86/sse
+dir /cpu/x86/lapic
+dir /cpu/x86/cache
+dir /cpu/x86/smm
+dir /cpu/intel/microcode
+dir /cpu/intel/hyperthreading
+dir /cpu/intel/speedstep
+driver model_6cx_init.o
--- /dev/null
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2000,2007 Ronald G. Minnich <rminnich@gmail.com>
+ * Copyright (C) 2007-2008 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#define CACHE_AS_RAM_SIZE CONFIG_DCACHE_RAM_SIZE
+#define CACHE_AS_RAM_BASE CONFIG_DCACHE_RAM_BASE
+#define post_code(x) intel_chip_post_macro(x)
+
+#include <cpu/x86/mtrr.h>
+#include <cpu/amd/mtrr.h>
+
+ /* Save the BIST result */
+ movl %eax, %ebp
+
+cache_as_ram:
+#if CONFIG_USE_FALLBACK_IMAGE == 1
+
+ post_code(0x20)
+
+ /* Send INIT IPI to all excluding ourself */
+ movl $0x000C4500, %eax
+ movl $0xFEE00300, %esi
+ movl %eax, (%esi)
+
+ post_code(0x21)
+
+ /* Zero out all Fixed Range and Variable Range MTRRs */
+ movl $mtrr_table, %esi
+ movl $( (mtrr_table_end - mtrr_table) / 2), %edi
+ xorl %eax, %eax
+ xorl %edx, %edx
+clear_mtrrs:
+ movw (%esi), %bx
+ movzx %bx, %ecx
+ wrmsr
+ add $2, %esi
+ dec %edi
+ jnz clear_mtrrs
+ post_code(0x22)
+
+ /* Configure the default memory type to uncacheable */
+ movl $MTRRdefType_MSR, %ecx
+ rdmsr
+ andl $(~0x00000cff), %eax
+ wrmsr
+
+ post_code(0x23)
+ /* Set cache as ram base address */
+ movl $(MTRRphysBase_MSR(0)), %ecx
+ movl $(CACHE_AS_RAM_BASE | MTRR_TYPE_WRBACK), %eax
+ xorl %edx, %edx
+ wrmsr
+
+ post_code(0x24)
+ /* Set cache as ram mask */
+ movl $(MTRRphysMask_MSR(0)), %ecx
+ movl $(~((CACHE_AS_RAM_SIZE-1)) | (1 << 11)), %eax
+ movl $0x00000000, %edx
+ wrmsr
+
+ post_code(0x25)
+ /* Enable MTRR */
+ movl $MTRRdefType_MSR, %ecx
+ rdmsr
+ orl $(1 << 11), %eax
+ wrmsr
+
+ post_code(0x26)
+ /* Enable L2 Cache */
+ movl $0x11e, %ecx
+ rdmsr
+ orl $(1 << 8), %eax
+ wrmsr
+
+ post_code(0x27)
+ /* CR0.CD = 0, CR0.NW = 0 */
+ movl %cr0, %eax
+ andl $( ~( (1 << 30) | (1 << 29) ) ), %eax
+ invd
+ movl %eax, %cr0
+
+ post_code(0x28)
+ /* Clear the cache memory reagion */
+ movl $CACHE_AS_RAM_BASE, %esi
+ movl %esi, %edi
+ movl $(CACHE_AS_RAM_SIZE / 4), %ecx
+ //movl $0x23322332, %eax
+ xorl %eax, %eax
+ rep stosl
+#endif
+
+ post_code(0x29)
+ /* Enable Cache As RAM mode by disabling cache */
+ movl %cr0, %eax
+ orl $(1 << 30), %eax
+ movl %eax, %cr0
+
+#if 0
+#if defined(CONFIG_XIP_ROM_SIZE) && defined(CONFIG_XIP_ROM_BASE)
+ /* Enable cache for our code in Flash because we do CONFIG_XIP here */
+ movl $MTRRphysBase_MSR(1), %ecx
+ xorl %edx, %edx
+ movl $(CONFIG_XIP_ROM_BASE | MTRR_TYPE_WRBACK), %eax
+ wrmsr
+
+ movl $MTRRphysMask_MSR(1), %ecx
+ movl $0x0000000f, %edx
+ movl $(~(CONFIG_XIP_ROM_SIZE - 1) | 0x800), %eax
+ wrmsr
+#endif /* CONFIG_XIP_ROM_SIZE && CONFIG_XIP_ROM_BASE */
+#endif
+
+ post_code(0x2a)
+ /* enable cache */
+ movl %cr0, %eax
+ andl $( ~( (1 << 30) | (1 << 29) ) ), %eax
+ movl %eax, %cr0
+
+ /* Set up stack pointer */
+ movl $(CACHE_AS_RAM_BASE + CACHE_AS_RAM_SIZE - 4), %eax
+ movl %eax, %esp
+
+ /* Restore the BIST result */
+ movl %ebp, %eax
+ movl %esp, %ebp
+ pushl %eax
+
+ post_code(0x23)
+
+ call stage1_main
+
+ post_code(0x2f)
+error:
+ hlt
+ jmp error
+
+mtrr_table:
+ /* Fixed MTRRs */
+ .word 0x250, 0x258, 0x259
+ .word 0x268, 0x269, 0x26A
+ .word 0x26B, 0x26C, 0x26D
+ .word 0x26E, 0x26F
+ /* Variable MTRRs */
+ .word 0x200, 0x201, 0x202, 0x203
+ .word 0x204, 0x205, 0x206, 0x207
+ .word 0x208, 0x209, 0x20A, 0x20B
+ .word 0x20C, 0x20D, 0x20E, 0x20F
+mtrr_table_end:
+
--- /dev/null
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2008 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include "cpu/x86/car/copy_and_run.c"
+
+void real_main(unsigned long bist);
+
+void stage1_main(unsigned long bist)
+{
+ unsigned int cpu_reset = 0;
+
+#if CONFIG_USE_FALLBACK_IMAGE == 1
+ /* Is this a deliberate reset by the bios */
+ if (bios_reset_detected() && last_boot_normal()) {
+ goto normal_image;
+ } else {
+ /* This is the primary cpu how should I boot? */
+ check_cmos_failed();
+ if (do_normal_boot()) {
+ goto normal_image;
+ }
+ else {
+ goto fallback_image;
+ }
+ }
+ normal_image:
+ __asm__ volatile ("jmp __normal_image"
+ : /* outputs */
+ : "a" (bist) /* inputs */
+ );
+ fallback_image:
+#endif
+
+ real_main(bist);
+
+ /* No servicable parts below this line .. */
+
+ {
+ /* Check value of esp to verify if we have enough rom for stack in Cache as RAM */
+ unsigned v_esp;
+ __asm__ volatile (
+ "movl %%esp, %0\n\t"
+ : "=a" (v_esp)
+ );
+ printk_spew("v_esp=%08x\r\n", v_esp);
+ }
+
+cpu_reset_x:
+
+ printk_spew("cpu_reset = %08x\r\n",cpu_reset);
+
+ if(cpu_reset == 0) {
+ print_spew("Clearing initial memory region: ");
+ }
+ print_spew("No cache as ram now - ");
+
+ /* store cpu_reset to ebx */
+ __asm__ volatile (
+ "movl %0, %%ebx\n\t"
+ ::"a" (cpu_reset)
+ );
+
+ if(cpu_reset==0) {
+#define CLEAR_FIRST_1M_RAM 1
+#include "cache_as_ram_post.c"
+ } else {
+#undef CLEAR_FIRST_1M_RAM
+#include "cache_as_ram_post.c"
+ }
+
+ __asm__ volatile (
+ /* set new esp */ /* before _RAMBASE */
+ "subl %0, %%ebp\n\t"
+ "subl %0, %%esp\n\t"
+ ::"a"( (CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE)- CONFIG_RAMBASE )
+ );
+
+ {
+ unsigned new_cpu_reset;
+
+ /* get back cpu_reset from ebx */
+ __asm__ volatile (
+ "movl %%ebx, %0\n\t"
+ :"=a" (new_cpu_reset)
+ );
+
+#ifdef CONFIG_DEACTIVATE_CAR
+ print_debug("Deactivating CAR");
+#include CONFIG_DEACTIVATE_CAR_FILE
+ print_debug(" - Done.\r\n");
+#endif
+ /* Copy and execute coreboot_ram */
+ copy_and_run(new_cpu_reset);
+ /* We will not return */
+ }
+
+ print_debug("sorry. parachute did not open.\r\n");
+}
--- /dev/null
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2008 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+ __asm__ volatile (
+
+ "movb $0x30, %al\noutb %al, $0x80\n"
+
+ /* Disable Cache */
+ "movl %cr0, %eax\n"
+ "orl $(1 << 30), %eax\n"
+ "movl %eax, %cr0\n"
+
+ "movb $0x31, %al\noutb %al, $0x80\n"
+
+ /* Disable MTRR */
+ "movl $MTRRdefType_MSR, %ecx\n"
+ "rdmsr\n"
+ "andl $(~(1 << 11)), %eax\n"
+ "wrmsr\n"
+
+ "movb $0x32, %al\noutb %al, $0x80\n"
+
+ "invd\n"
+#if 0
+ "xorl %eax, %eax\n"
+ "xorl %edx, %edx\n"
+ "movl $MTRRphysBase_MSR(0), %ecx\n"
+ "wrmsr\n"
+ "movl $MTRRphysMask_MSR(0), %ecx\n"
+ "wrmsr\n"
+ "movl $MTRRphysBase_MSR(1), %ecx\n"
+ "wrmsr\n"
+ "movl $MTRRphysMask_MSR(1), %ecx\n"
+ "wrmsr\n"
+#endif
+
+ "movb $0x33, %al\noutb %al, $0x80\n"
+#ifdef CLEAR_FIRST_1M_RAM
+ "movb $0x34, %al\noutb %al, $0x80\n"
+ /* Enable Write Combining and Speculative Reads for the first 1MB */
+ "movl $MTRRphysBase_MSR(0), %ecx\n"
+ "movl $(0x00000000 | MTRR_TYPE_WRCOMB), %eax\n"
+ "xorl %edx, %edx\n"
+ "wrmsr\n"
+ "movl $MTRRphysMask_MSR(0), %ecx\n"
+ "movl $(~(1024*1024 -1) | (1 << 11)), %eax\n"
+ "movl $0x0000000f, %edx\n" // 36bit address space
+ "wrmsr\n"
+ "movb $0x35, %al\noutb %al, $0x80\n"
+#endif
+
+ /* Enable Cache */
+ "movl %cr0, %eax\n"
+ "andl $~( (1 << 30) | (1 << 29) ), %eax\n"
+ "movl %eax, %cr0\n"
+
+ "movb $0x36, %al\noutb %al, $0x80\n"
+#ifdef CLEAR_FIRST_1M_RAM
+
+ /* Clear first 1MB of RAM */
+ "movl $0x00000000, %edi\n"
+ "cld\n"
+ "xorl %eax, %eax\n"
+ "movl $((1024*1024) / 4), %ecx\n"
+ "rep stosl\n"
+
+ "movb $0x37, %al\noutb %al, $0x80\n"
+#endif
+
+ /* Disable Cache */
+ "movl %cr0, %eax\n"
+ "orl $(1 << 30), %eax\n"
+ "movl %eax, %cr0\n"
+
+ "movb $0x38, %al\noutb %al, $0x80\n"
+
+ /* Enable Write Back and Speculative Reads for the first 1MB */
+ "movl $MTRRphysBase_MSR(0), %ecx\n"
+ "movl $(0x00000000 | MTRR_TYPE_WRBACK), %eax\n"
+ "xorl %edx, %edx\n"
+ "wrmsr\n"
+ "movl $MTRRphysMask_MSR(0), %ecx\n"
+ "movl $(~(1024*1024 -1) | (1 << 11)), %eax\n"
+ "movl $0x0000000f, %edx\n" // 36bit address space
+ "wrmsr\n"
+
+ "movb $0x39, %al\noutb %al, $0x80\n"
+
+ /* And Enable Cache again after setting MTRRs */
+ "movl %cr0, %eax\n"
+ "andl $~( (1 << 30) | (1 << 29) ), %eax\n"
+ "movl %eax, %cr0\n"
+
+ "movb $0x3a, %al\noutb %al, $0x80\n"
+
+ /* Enable MTRR */
+ "movl $MTRRdefType_MSR, %ecx\n"
+ "rdmsr\n"
+ "orl $(1 << 11), %eax\n"
+ "wrmsr\n"
+
+ "movb $0x3b, %al\noutb %al, $0x80\n"
+
+ /* Invalidate the cache again */
+ "invd\n"
+ "movb $0x3c, %al\noutb %al, $0x80\n"
+ );
--- /dev/null
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <string.h>
+#include <cpu/cpu.h>
+#include <cpu/x86/mtrr.h>
+#include <cpu/x86/msr.h>
+#include <cpu/x86/lapic.h>
+#include <cpu/intel/microcode.h>
+#include <cpu/intel/hyperthreading.h>
+#include <cpu/x86/cache.h>
+#include <cpu/x86/mtrr.h>
+#include <usbdebug_direct.h>
+
+static const uint32_t microcode_updates[] = {
+ /* Dummy terminator */
+ 0x0, 0x0, 0x0, 0x0,
+ 0x0, 0x0, 0x0, 0x0,
+ 0x0, 0x0, 0x0, 0x0,
+ 0x0, 0x0, 0x0, 0x0,
+};
+
+static inline void strcpy(char *dst, char *src)
+{
+ while (*src) *dst++ = *src++;
+}
+
+static void fill_processor_name(char *processor_name)
+{
+ struct cpuid_result regs;
+ char temp_processor_name[49];
+ char *processor_name_start;
+ unsigned int *name_as_ints = (unsigned int *)temp_processor_name;
+ int i;
+
+ for (i=0; i<3; i++) {
+ regs = cpuid(0x80000002 + i);
+ name_as_ints[i*4 + 0] = regs.eax;
+ name_as_ints[i*4 + 1] = regs.ebx;
+ name_as_ints[i*4 + 2] = regs.ecx;
+ name_as_ints[i*4 + 3] = regs.edx;
+ }
+
+ temp_processor_name[48] = 0;
+
+ /* Skip leading spaces */
+ processor_name_start = temp_processor_name;
+ while (*processor_name_start == ' ')
+ processor_name_start++;
+
+ memset(processor_name, 0, 49);
+ strcpy(processor_name, processor_name_start);
+}
+
+#define IA32_FEATURE_CONTROL 0x003a
+
+#define CPUID_VMX (1 << 5)
+#define CPUID_SMX (1 << 6)
+static void enable_vmx(void)
+{
+ struct cpuid_result regs;
+ msr_t msr;
+
+ msr = rdmsr(IA32_FEATURE_CONTROL);
+
+ if (msr.lo & (1 << 0)) {
+ /* VMX locked. If we set it again we get an illegal
+ * instruction
+ */
+ return;
+ }
+
+ regs = cpuid(1);
+ if (regs.ecx & CPUID_VMX) {
+ msr.lo |= (1 << 2);
+ if (regs.ecx & CPUID_SMX)
+ msr.lo |= (1 << 1);
+ }
+
+ wrmsr(IA32_FEATURE_CONTROL, msr);
+
+ msr.lo |= (1 << 0); /* Set lock bit */
+
+ wrmsr(IA32_FEATURE_CONTROL, msr);
+}
+
+#define PMG_CST_CONFIG_CONTROL 0xe2
+#define PMG_IO_BASE_ADDR 0xe3
+#define PMG_IO_CAPTURE_ADDR 0xe4
+#define PMB0 0x510 /* analogous to P_BLK in cpu.asl */
+#define PMB1 0x0 /* IO port that triggers SMI once cores are in the same state.
+ See CSM Trigger, at PMG_CST_CONFIG_CONTROL[6:4] */
+#define HIGHEST_CLEVEL 3
+static void configure_c_states(void)
+{
+ msr_t msr;
+
+ msr = rdmsr(PMG_CST_CONFIG_CONTROL);
+ msr.lo |= (1 << 15); // Lock configuration
+ msr.lo |= (1 << 10); // redirect IO-based CState transition requests to MWAIT
+ msr.lo &= ~(1 << 9); // Issue a single stop grant cycle upon stpclk
+ msr.lo &= ~7; msr.lo |= HIGHEST_CLEVEL; // support at most C3
+ // TODO Do we want Deep C4 and Dynamic L2 shrinking?
+ wrmsr(PMG_CST_CONFIG_CONTROL, msr);
+
+ // set P_BLK address
+ msr = rdmsr(PMG_IO_BASE_ADDR);
+ msr.lo = (PMB0 + 4) | (PMB1 << 16);
+ wrmsr(PMG_IO_BASE_ADDR, msr);
+
+ // set C_LVL controls
+ msr = rdmsr(PMG_IO_CAPTURE_ADDR);
+ msr.lo = (PMB0 + 4) | ((HIGHEST_CLEVEL - 2) << 16); // -2 because LVL0+1 aren't counted
+ wrmsr(PMG_IO_CAPTURE_ADDR, msr);
+}
+
+#define IA32_MISC_ENABLE 0x1a0
+static void configure_misc(void)
+{
+ msr_t msr;
+
+ msr = rdmsr(IA32_MISC_ENABLE);
+ msr.lo |= (1 << 3); /* TM1 enable */
+ msr.lo |= (1 << 13); /* TM2 enable */
+ msr.lo |= (1 << 17); /* Bidirectional PROCHOT# */
+
+ msr.lo |= (1 << 10); /* FERR# multiplexing */
+
+ // TODO: Only if IA32_PLATFORM_ID[17] = 0 and IA32_PLATFORM_ID[50] = 1
+ msr.lo |= (1 << 16); /* Enhanced SpeedStep Enable */
+
+ // TODO Do we want Deep C4 and Dynamic L2 shrinking?
+ wrmsr(IA32_MISC_ENABLE, msr);
+
+ msr.lo |= (1 << 20); /* Lock Enhanced SpeedStep Enable */
+ wrmsr(IA32_MISC_ENABLE, msr);
+}
+
+#if CONFIG_USBDEBUG_DIRECT
+static unsigned ehci_debug_addr;
+#endif
+
+static void model_6ex_init(device_t cpu)
+{
+ char processor_name[49];
+
+ /* Turn on caching if we haven't already */
+ x86_enable_cache();
+
+ /* Update the microcode */
+ intel_update_microcode(microcode_updates);
+
+ /* Print processor name */
+ fill_processor_name(processor_name);
+ printk_info("CPU: %s.\n", processor_name);
+
+#if CONFIG_USBDEBUG_DIRECT
+ // Is this caution really needed?
+ if(!ehci_debug_addr)
+ ehci_debug_addr = get_ehci_debug();
+ set_ehci_debug(0);
+#endif
+
+ /* Setup MTRRs */
+ x86_setup_mtrrs(36);
+ x86_mtrr_check();
+
+#if CONFIG_USBDEBUG_DIRECT
+ set_ehci_debug(ehci_debug_addr);
+#endif
+
+ /* Enable the local cpu apics */
+ setup_lapic();
+
+ /* Enable virtualization */
+ enable_vmx();
+
+ /* Configure C States */
+ configure_c_states();
+
+ /* Configure Enhanced SpeedStep and Thermal Sensors */
+ configure_misc();
+
+ /* TODO: PIC thermal sensor control */
+
+ /* Start up my cpu siblings */
+ intel_sibling_init(cpu);
+}
+
+static struct device_operations cpu_dev_ops = {
+ .init = model_6ex_init,
+};
+
+static struct cpu_device_id cpu_table[] = {
+ { X86_VENDOR_INTEL, 0x06e0 }, /* Intel Core Solo/Core Duo */
+ { X86_VENDOR_INTEL, 0x06e8 }, /* Intel Core Solo/Core Duo */
+ { X86_VENDOR_INTEL, 0x06ec }, /* Intel Core Solo/Core Duo */
+ { 0, 0 },
+};
+
+static const struct cpu_driver driver __cpu_driver = {
+ .ops = &cpu_dev_ops,
+ .id_table = cpu_table,
+};
+
--- /dev/null
+config chip.h
+object socket_441.o
+dir /cpu/intel/model_106cx
--- /dev/null
+extern struct chip_operations cpu_intel_socket_441_ops;
+
+struct cpu_intel_socket_441_config {
+};
--- /dev/null
+#include <device/device.h>
+#include "chip.h"
+
+
+struct chip_operations cpu_intel_socket_441_ops = {
+ CHIP_NAME("Socket 441 CPU")
+};
prompt "Mainboard model"
depends on VENDOR_INTEL
+source "src/mainboard/intel/d945gclf/Kconfig"
source "src/mainboard/intel/eagleheights/Kconfig"
source "src/mainboard/intel/jarrell/Kconfig"
source "src/mainboard/intel/mtarvon/Kconfig"
--- /dev/null
+##
+## This file is part of the coreboot project.
+##
+## Copyright (C) 2007-2008 coresystems GmbH
+##
+## This program is free software; you can redistribute it and/or
+## modify it under the terms of the GNU General Public License as
+## published by the Free Software Foundation; version 2 of
+## the License.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+## MA 02110-1301 USA
+##
+
+##
+## This mainboard requires DCACHE_AS_RAM enabled. It won't work without.
+##
+
+##
+## Only use the option table in a normal image
+##
+default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
+
+##
+## Image size calculation
+##
+
+include /config/nofailovercalculation.lb
+
+##
+## Set all of the defaults for an x86 architecture
+##
+
+arch i386 end
+
+##
+## Build the objects we have code for in this directory.
+##
+
+driver mainboard.o
+driver rtl8168.o
+if CONFIG_GENERATE_MP_TABLE object mptable.o end
+if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
+if CONFIG_HAVE_SMI_HANDLER smmobject mainboard_smi.o end
+
+if CONFIG_GENERATE_ACPI_TABLES
+ object fadt.o
+ object acpi_tables.o
+ makerule dsdt.c
+ depends "$(CONFIG_MAINBOARD)/dsdt.asl"
+ action "$(CONFIG_CROSS_COMPILE)cpp -D__ACPI__ -P $(CPPFLAGS) -I$(CONFIG_MAINBOARD) $(CONFIG_MAINBOARD)/dsdt.asl -o $(CURDIR)/dsdt.asl"
+ action "iasl -p dsdt -tc $(CURDIR)/dsdt.asl"
+ action "mv $(CURDIR)/dsdt.hex dsdt.c"
+ end
+ object ./dsdt.o
+end
+
+object reset.o
+
+if CONFIG_USE_INIT
+
+makerule ./auto.o
+ depends "$(CONFIG_MAINBOARD)/auto.c option_table.h"
+ action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/auto.c -o $@"
+end
+
+else
+
+makerule ./auto.inc
+ depends "$(CONFIG_MAINBOARD)/auto.c option_table.h"
+ action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/auto.c -o $@"
+ action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
+ action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
+end
+
+end
+
+##
+## Build our 16 bit and 32 bit coreboot entry code
+##
+mainboardinit cpu/x86/16bit/entry16.inc
+mainboardinit cpu/x86/32bit/entry32.inc
+ldscript /cpu/x86/16bit/entry16.lds
+if CONFIG_USE_INIT
+ ldscript /cpu/x86/32bit/entry32.lds
+ ldscript /cpu/x86/car/cache_as_ram.lds
+end
+
+##
+## Build our reset vector (This is where coreboot is entered)
+##
+if CONFIG_USE_FALLBACK_IMAGE
+ mainboardinit cpu/x86/16bit/reset16.inc
+ ldscript /cpu/x86/16bit/reset16.lds
+else
+ mainboardinit cpu/x86/32bit/reset32.inc
+ ldscript /cpu/x86/32bit/reset32.lds
+end
+
+
+##
+## Include an id string (For safe flashing)
+##
+mainboardinit arch/i386/lib/id.inc
+ldscript /arch/i386/lib/id.lds
+
+##
+## Setup Cache-As-Ram
+##
+mainboardinit cpu/intel/model_106cx/cache_as_ram.inc
+
+###
+### This is the early phase of coreboot startup
+### Things are delicate and we test to see if we should
+### failover to another image.
+###
+if CONFIG_USE_FALLBACK_IMAGE
+ ldscript /arch/i386/lib/failover.lds
+end
+
+###
+### O.k. We aren't just an intermediary anymore!
+###
+
+if CONFIG_USE_INIT
+initobject auto.o
+else
+mainboardinit ./auto.inc
+end
+
+##
+## Include the secondary Configuration files
+##
+dir /pc80
+config chip.h
+
+chip northbridge/intel/i945
+
+ device apic_cluster 0 on
+ chip cpu/intel/socket_441
+ device apic 0 on end
+ end
+ end
+
+ device pci_domain 0 on
+ device pci 00.0 on end # host bridge
+ device pci 01.0 off end # i945 PCIe root port
+ chip drivers/pci/onboard
+ device pci 02.0 on end # vga controller
+ # register "rom_address" = "0xfffc0000" # 256 KB image
+ # register "rom_address" = "0xfff80000" # 512 KB image
+ # register "rom_address" = "0xfff00000" # 1 MB image
+ end
+ device pci 02.1 on end # display controller
+
+ chip southbridge/intel/i82801gx
+ register "pirqa_routing" = "0x05"
+ register "pirqb_routing" = "0x07"
+ register "pirqc_routing" = "0x05"
+ register "pirqd_routing" = "0x07"
+ register "pirqe_routing" = "0x80"
+ register "pirqf_routing" = "0x80"
+ register "pirqg_routing" = "0x80"
+ register "pirqh_routing" = "0x06"
+
+ # GPI routing
+ # 0 No effect (default)
+ # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set)
+ # 2 SCI (if corresponding GPIO_EN bit is also set)
+ register "gpi13_routing" = "1"
+ register "gpe0_en" = "0x20000601"
+
+ register "ide_legacy_combined" = "0x1"
+ register "ide_enable_primary" = "0x1"
+ register "ide_enable_secondary" = "0x0"
+ register "sata_ahci" = "0x0"
+
+ device pci 1b.0 on end # High Definition Audio
+ device pci 1c.0 on end # PCIe
+ device pci 1c.1 on end # PCIe
+ device pci 1c.2 on end # PCIe
+ #device pci 1c.3 off end # PCIe port 4
+ #device pci 1c.4 off end # PCIe port 5
+ #device pci 1c.5 off end # PCIe port 6
+ device pci 1d.0 on end # USB UHCI
+ device pci 1d.1 on end # USB UHCI
+ device pci 1d.2 on end # USB UHCI
+ device pci 1d.3 on end # USB UHCI
+ device pci 1d.7 on end # USB2 EHCI
+ device pci 1e.0 on end # PCI bridge
+ #device pci 1e.2 off end # AC'97 Audio
+ #device pci 1e.3 off end # AC'97 Modem
+ device pci 1f.0 on # LPC bridge
+ chip superio/smsc/lpc47m15x
+ device pnp 2e.0 off # Floppy
+ end
+ device pnp 2e.3 off # Parport
+ end
+ device pnp 2e.4 on
+ io 0x60 = 0x3f8
+ irq 0x70 = 4
+ end
+ device pnp 2e.5 on
+ io 0x60 = 0x2f8
+ irq 0x70 = 3
+ irq 0xf1 = 4 # set IRMODE 0 # XXX not an irq
+ end
+ device pnp 2e.7 on # Keyboard+Mouse
+ io 0x60 = 0x60
+ io 0x62 = 0x64
+ irq 0x70 = 1
+ irq 0x72 = 12
+ irq 0xf0 = 0x82 # HW accel A20.
+ end
+ device pnp 2e.8 on # GAME
+ # all default
+ end
+ device pnp 2e.a on # PME
+ end
+ device pnp 2e.b on # MPU
+ end
+ end
+ end
+ #device pci 1f.1 off end # IDE
+ device pci 1f.2 on end # SATA
+ device pci 1f.3 on end # SMBus
+ #device pci 1f.4 off end # Realtek ID Codec
+ end
+ end
+end
--- /dev/null
+config BOARD_INTEL_D945GCLF
+ bool "D945GCLF"
+ select ARCH_X86
+ select CPU_INTEL_CORE
+ select CPU_INTEL_SOCKET_MFCPGA478
+ select NORTHBRIDGE_INTEL_I945
+ select SOUTHBRIDGE_INTEL_I82801GX
+ select SUPERIO_WINBOND_W83627THG
+ select HAVE_PIRQ_TABLE
+ select HAVE_MP_TABLE
+ select MMCONF_SUPPORT
+ select USE_PRINTK_IN_CAR
+ select AP_IN_SIPI_WAIT
+ select UDELAY_LAPIC
+ select HAVE_ACPI_TABLES
+ select HAVE_SMI_HANDLER
+ select BOARD_ROMSIZE_KB_1024
+
+config MAINBOARD_DIR
+ string
+ default intel/d945gclf
+ depends on BOARD_INTEL_D945GCLF
+
+config DCACHE_RAM_BASE
+ hex
+ default 0xffdf8000
+ depends on BOARD_INTEL_D945GCLF
+
+config DCACHE_RAM_SIZE
+ hex
+ default 0x8000
+ depends on BOARD_INTEL_D945GCLF
+
+config LB_CKS_RANGE_END
+ int
+ default 122
+ depends on BOARD_INTEL_D945GCLF
+
+config LB_CKS_LOC
+ int
+ default 123
+ depends on BOARD_INTEL_D945GCLF
+
+config MAINBOARD_PART_NUMBER
+ string
+ default "D945GCLF"
+ depends on BOARD_INTEL_D945GCLF
+
+config MMCONF_BASE_ADDRESS
+ hex
+ default 0xf0000000
+ depends on BOARD_INTEL_D945GCLF
+
+config IRQ_SLOT_COUNT
+ int
+ default 18
+ depends on BOARD_INTEL_D945GCLF
+
+config MAX_PHYSICAL_CPUS
+ int
+ default 2
+ depends on BOARD_INTEL_D945GCLF
--- /dev/null
+##
+## This file is part of the coreboot project.
+##
+## Copyright (C) 2007-2008 coresystems GmbH
+##
+## This program is free software; you can redistribute it and/or
+## modify it under the terms of the GNU General Public License as
+## published by the Free Software Foundation; version 2 of
+## the License.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+## MA 02110-1301 USA
+##
+
+##
+## This mainboard requires DCACHE_AS_RAM enabled. It won't work without.
+##
+
+driver-y += mainboard.o
+driver-y += rtl8168.o
+
+#obj-y += ../../../southbridge/intel/i82801gx/i82801gx_reset.c
+obj-$(CONFIG_GENERATE_MP_TABLE) += mptable.o
+obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o
+obj-$(CONFIG_GENERATE_ACPI_TABLES) += dsdt.o
+obj-$(CONFIG_GENERATE_ACPI_TABLES) += acpi_tables.o
+obj-$(CONFIG_GENERATE_ACPI_TABLES) += fadt.o
+
+smmobj-$(CONFIG_HAVE_SMI_HANDLER) += mainboard_smi.o
+
+# This is part of the conversion to init-obj and away from included code.
+
+initobj-y += crt0.o
+# FIXME in $(top)/Makefile
+crt0-y += ../../../../src/cpu/x86/16bit/entry16.inc
+crt0-y += ../../../../src/cpu/x86/32bit/entry32.inc
+crt0-y += ../../../../src/cpu/x86/16bit/reset16.inc
+crt0-y += ../../../../src/arch/i386/lib/id.inc
+crt0-y += ../../../../src/cpu/intel/model_6ex/cache_as_ram.inc
+crt0-y += auto.inc
+
+ldscript-y += ../../../../src/arch/i386/init/ldscript_fallback_cbfs.lb
+ldscript-y += ../../../../src/cpu/x86/16bit/entry16.lds
+ldscript-y += ../../../../src/cpu/x86/16bit/reset16.lds
+ldscript-y += ../../../../src/arch/i386/lib/id.lds
+ldscript-y += ../../../../src/arch/i386/lib/failover.lds
+
+ifdef POST_EVALUATION
+
+$(obj)/dsdt.c: $(src)/mainboard/$(MAINBOARDDIR)/dsdt.asl
+ iasl -p dsdt -tc $(src)/mainboard/$(MAINBOARDDIR)/dsdt.asl
+ mv dsdt.hex $@
+
+$(obj)/mainboard/$(MAINBOARDDIR)/dsdt.o: $(obj)/dsdt.c
+ $(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(src) -I. -c $< -o $@
+
+$(obj)/mainboard/$(MAINBOARDDIR)/auto.inc: $(src)/mainboard/$(MAINBOARDDIR)/auto.c $(obj)/option_table.h
+ $(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(src) -I. -c -S $(src)/mainboard/$(MAINBOARDDIR)/auto.c -o $@
+ perl -e 's/\.rodata/.rom.data/g' -pi $@
+ perl -e 's/\.text/.section .rom.text/g' -pi $@
+
+endif
+
--- /dev/null
+##
+## This file is part of the coreboot project.
+##
+## Copyright (C) 2007-2008 coresystems GmbH
+##
+## This program is free software; you can redistribute it and/or
+## modify it under the terms of the GNU General Public License as
+## published by the Free Software Foundation; version 2 of
+## the License.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+## MA 02110-1301 USA
+##
+
+# Tables
+uses CONFIG_GENERATE_MP_TABLE
+uses CONFIG_GENERATE_PIRQ_TABLE
+uses CONFIG_IRQ_SLOT_COUNT
+uses CONFIG_HAVE_OPTION_TABLE
+uses CONFIG_USE_OPTION_TABLE
+uses CONFIG_LB_CKS_RANGE_START
+uses CONFIG_LB_CKS_RANGE_END
+uses CONFIG_LB_CKS_LOC
+uses CONFIG_GENERATE_ACPI_TABLES
+uses CONFIG_HAVE_ACPI_RESUME
+uses CONFIG_HAVE_MAINBOARD_RESOURCES
+# SMP
+uses CONFIG_SMP
+uses CONFIG_LOGICAL_CPUS
+uses CONFIG_AP_IN_SIPI_WAIT
+uses CONFIG_MAX_CPUS
+uses CONFIG_MAX_PHYSICAL_CPUS
+uses CONFIG_IOAPIC
+# Image Size
+uses CONFIG_USE_FALLBACK_IMAGE
+uses CONFIG_HAVE_FALLBACK_BOOT
+uses CONFIG_FALLBACK_SIZE
+uses CONFIG_ROM_SIZE
+uses CONFIG_ROM_SECTION_SIZE
+uses CONFIG_ROM_IMAGE_SIZE
+uses CONFIG_ROM_SECTION_SIZE
+uses CONFIG_ROM_SECTION_OFFSET
+# Payload
+uses CONFIG_ROM_PAYLOAD
+uses CONFIG_COMPRESSED_PAYLOAD_LZMA
+uses CONFIG_PRECOMPRESSED_PAYLOAD
+# Build Internals
+uses CONFIG_RAMBASE
+uses CONFIG_ROMBASE
+uses CONFIG_STACK_SIZE
+uses CONFIG_HEAP_SIZE
+uses CONFIG_USE_DCACHE_RAM
+uses CONFIG_DCACHE_RAM_BASE
+uses CONFIG_DCACHE_RAM_SIZE
+uses CONFIG_USE_INIT
+uses CONFIG_USE_PRINTK_IN_CAR
+uses CONFIG_XIP_ROM_BASE
+uses CONFIG_XIP_ROM_SIZE
+uses CONFIG_HAVE_HARD_RESET
+uses CONFIG_HAVE_SMI_HANDLER
+uses CONFIG_PCIE_CONFIGSPACE_HOLE
+uses CONFIG_MMCONF_SUPPORT
+uses CONFIG_MMCONF_BASE_ADDRESS
+uses CONFIG_GFXUMA
+
+#
+uses CONFIG_MAINBOARD
+uses CONFIG_MAINBOARD_PART_NUMBER
+uses CONFIG_MAINBOARD_VENDOR
+uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
+uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
+# Timers
+uses CONFIG_UDELAY_LAPIC
+# Console
+uses CONFIG_CONSOLE_SERIAL8250
+uses CONFIG_TTYS0_BAUD
+uses CONFIG_TTYS0_BASE
+uses CONFIG_TTYS0_LCS
+uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
+uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
+uses CONFIG_CONSOLE_VGA
+uses CONFIG_VGA_ROM_RUN
+uses CONFIG_PCI_ROM_RUN
+uses CONFIG_DEBUG
+# Toolchain
+uses CC
+uses HOSTCC
+uses CONFIG_CROSS_COMPILE
+uses CONFIG_OBJCOPY
+# Tweaks
+uses CONFIG_GDB_STUB
+uses CONFIG_MAX_REBOOT_CNT
+uses CONFIG_USE_WATCHDOG_ON_BOOT
+uses COREBOOT_EXTRA_VERSION
+uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
+
+###
+### Build options
+###
+
+##
+##
+default CONFIG_MAX_REBOOT_CNT=3
+
+##
+## Use the watchdog to break out of a lockup condition
+##
+default CONFIG_USE_WATCHDOG_ON_BOOT=0
+
+##
+## ROM_SIZE is the size of boot ROM that this board will use.
+##
+default CONFIG_ROM_SIZE=CONFIG_FALLBACK_SIZE*2
+
+
+##
+## Build code for the fallback boot
+##
+default CONFIG_HAVE_FALLBACK_BOOT=1
+
+##
+## Delay timer options
+##
+default CONFIG_UDELAY_LAPIC=1
+
+##
+## Build code to reset the motherboard from coreboot
+##
+default CONFIG_HAVE_HARD_RESET=1
+
+##
+## Build SMI handler
+##
+default CONFIG_HAVE_SMI_HANDLER=1
+
+##
+## Leave a hole for mmapped PCIe config space
+##
+
+default CONFIG_PCIE_CONFIGSPACE_HOLE=1
+default CONFIG_MMCONF_SUPPORT=1
+default CONFIG_MMCONF_BASE_ADDRESS=0xf0000000
+
+##
+## UMA
+##
+default CONFIG_GFXUMA=1
+
+##
+## Build code to export a programmable irq routing table
+##
+default CONFIG_GENERATE_PIRQ_TABLE=1
+default CONFIG_IRQ_SLOT_COUNT=18
+
+##
+## Build code to export an x86 MP table
+## Useful for specifying IRQ routing values
+##
+default CONFIG_GENERATE_MP_TABLE=1
+
+##
+## Build code to provide ACPI support
+##
+default CONFIG_GENERATE_ACPI_TABLES=1
+default CONFIG_HAVE_MAINBOARD_RESOURCES=1
+default CONFIG_HAVE_ACPI_RESUME=1
+
+##
+## Build code to export a CMOS option table
+##
+default CONFIG_HAVE_OPTION_TABLE=1
+
+##
+## Move the default CONFIG_coreboot cmos range off of AMD RTC registers
+##
+default CONFIG_LB_CKS_RANGE_START=49
+default CONFIG_LB_CKS_RANGE_END=122
+default CONFIG_LB_CKS_LOC=123
+
+#VGA Console
+default CONFIG_CONSOLE_VGA=1
+# There are some network option roms that don't work with
+# coreboot's x86emu. Thus, we only execute the VGA option rom
+# for now:
+default CONFIG_VGA_ROM_RUN=1
+default CONFIG_PCI_ROM_RUN=0
+default CONFIG_DEBUG=0
+
+##
+## Build code for SMP support
+## Only worry about 2 micro processors
+##
+default CONFIG_SMP=1
+default CONFIG_MAX_CPUS=4
+default CONFIG_MAX_PHYSICAL_CPUS=2
+default CONFIG_LOGICAL_CPUS=1
+default CONFIG_AP_IN_SIPI_WAIT=1
+
+##
+## enable CACHE_AS_RAM specifics
+##
+default CONFIG_USE_DCACHE_RAM=1
+default CONFIG_DCACHE_RAM_SIZE=0x8000
+default CONFIG_DCACHE_RAM_BASE=0xffed8000
+default CONFIG_USE_PRINTK_IN_CAR=1
+
+##
+## Execute In Place settings
+##
+
+default CONFIG_XIP_ROM_SIZE = 128 * 1024
+default CONFIG_XIP_ROM_BASE = ( CONFIG_ROMBASE - CONFIG_XIP_ROM_SIZE + CONFIG_ROM_IMAGE_SIZE )
+
+##
+## Build code to setup a generic IOAPIC
+##
+default CONFIG_IOAPIC=1
+
+##
+## Clean up the motherboard id strings
+##
+default CONFIG_MAINBOARD_PART_NUMBER="D945GCLF"
+default CONFIG_MAINBOARD_VENDOR= "INTEL"
+
+default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x8086
+default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x464c
+
+###
+### coreboot layout values
+###
+
+## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
+default CONFIG_ROM_IMAGE_SIZE = 0xb800
+
+##
+## Use a small 8K stack
+##
+default CONFIG_STACK_SIZE=0x2000
+
+##
+## Use a small 32K heap
+##
+default CONFIG_HEAP_SIZE=0x8000
+
+
+###
+### Compute the location and size of where this firmware image
+### (coreboot plus bootloader) will live in the boot rom chip.
+###
+default CONFIG_FALLBACK_SIZE=CONFIG_ROM_IMAGE_SIZE
+
+##
+## coreboot C code runs at this location in RAM
+##
+default CONFIG_RAMBASE=0x00100000
+
+##
+## Load the payload from the ROM
+##
+default CONFIG_ROM_PAYLOAD=1
+
+###
+### Defaults of options that you may want to override in the target config file
+###
+
+##
+## The default compiler
+##
+default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
+default HOSTCC="gcc"
+
+##
+## Disable the gdb stub by default
+##
+default CONFIG_GDB_STUB=0
+
+##
+## The Serial Console
+##
+
+# To Enable the Serial Console
+default CONFIG_CONSOLE_SERIAL8250=1
+
+## Select the serial console baud rate
+default CONFIG_TTYS0_BAUD=115200
+#default CONFIG_TTYS0_BAUD=57600
+#default CONFIG_TTYS0_BAUD=38400
+#default CONFIG_TTYS0_BAUD=19200
+#default CONFIG_TTYS0_BAUD=9600
+#default CONFIG_TTYS0_BAUD=4800
+#default CONFIG_TTYS0_BAUD=2400
+#default CONFIG_TTYS0_BAUD=1200
+
+# Select the serial console base port
+default CONFIG_TTYS0_BASE=0x3f8
+
+# Select the serial protocol
+# This defaults to 8 data bits, 1 stop bit, and no parity
+default CONFIG_TTYS0_LCS=0x3
+
+##
+### Select the coreboot loglevel
+##
+## EMERG 1 system is unusable
+## ALERT 2 action must be taken immediately
+## CRIT 3 critical conditions
+## ERR 4 error conditions
+## WARNING 5 warning conditions
+## NOTICE 6 normal but significant condition
+## INFO 7 informational
+## DEBUG 8 debug-level messages
+## SPEW 9 Way too many details
+
+## Request this level of debugging output
+default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=5
+## At a maximum only compile in this level of debugging
+default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=9
+
+##
+## Select power on after power fail setting
+default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
+
+### End Options.lb
+end
--- /dev/null
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+Device(EC0)
+{
+ Name (_HID, EISAID("PNP0C09"))
+ Name (_UID, 1)
+
+ Method (_CRS, 0)
+ {
+ Name (ECMD, ResourceTemplate()
+ {
+ IO (Decode16, 0x62, 0x62, 0, 1)
+ IO (Decode16, 0x66, 0x66, 0, 1)
+ })
+
+ Return (ECMD)
+ }
+
+ Method (_REG, 2)
+ {
+ // This method is needed by Windows XP/2000
+ // for EC initialization before a driver
+ // is loaded
+ }
+
+ Name (_GPE, 23) // GPI07 / GPE23 -> Runtime SCI
+
+ // TODO EC Query methods
+
+ // TODO Scope _SB devices for AC power, LID, Power button
+
+}
--- /dev/null
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+/* This is board specific information: IRQ routing for the
+ * i945
+ */
+
+
+// PCI Interrupt Routing
+Method(_PRT)
+{
+ If (PICM) {
+ Return (Package() {
+ // PCIe Graphics 0:1.0
+ Package() { 0x0001ffff, 0, 0, 16 },
+ Package() { 0x0001ffff, 1, 0, 17 },
+ Package() { 0x0001ffff, 2, 0, 18 },
+ Package() { 0x0001ffff, 3, 0, 19 },
+ // Onboard graphics (IGD) 0:2.0
+ Package() { 0x0002ffff, 0, 0, 16 },
+ // High Definition Audio 0:1b.0
+ Package() { 0x001bffff, 0, 0, 22 },
+ // PCIe Root Ports 0:1c.x
+ Package() { 0x001cffff, 0, 0, 17 },
+ Package() { 0x001cffff, 1, 0, 16 },
+ Package() { 0x001cffff, 2, 0, 18 },
+ Package() { 0x001cffff, 3, 0, 19 },
+ // USB and EHCI 0:1d.x
+ Package() { 0x001dffff, 0, 0, 23 },
+ Package() { 0x001dffff, 1, 0, 19 },
+ Package() { 0x001dffff, 2, 0, 18 },
+ Package() { 0x001dffff, 3, 0, 16 },
+ // AC97 0:1e.2, 0:1e.3
+ Package() { 0x001effff, 0, 0, 22 },
+ Package() { 0x001effff, 1, 0, 20 },
+ // LPC device 0:1f.0
+ Package() { 0x001fffff, 0, 0, 18 },
+ Package() { 0x001fffff, 1, 0, 19 },
+ })
+ } Else {
+ Return (Package() {
+ // PCIe Graphics 0:1.0
+ Package() { 0x0001ffff, 0, \_SB.PCI0.LPCB.LNKA, 0 },
+ Package() { 0x0001ffff, 1, \_SB.PCI0.LPCB.LNKB, 0 },
+ Package() { 0x0001ffff, 2, \_SB.PCI0.LPCB.LNKC, 0 },
+ Package() { 0x0001ffff, 3, \_SB.PCI0.LPCB.LNKD, 0 },
+ // Onboard graphics (IGD) 0:2.0
+ Package() { 0x0002ffff, 0, \_SB.PCI0.LPCB.LNKA, 0 },
+ // High Definition Audio 0:1b.0
+ Package() { 0x001bffff, 0, \_SB.PCI0.LPCB.LNKF, 0 },
+ // PCIe Root Ports 0:1c.x
+ Package() { 0x001cffff, 0, \_SB.PCI0.LPCB.LNKB, 0 },
+ Package() { 0x001cffff, 1, \_SB.PCI0.LPCB.LNKA, 0 },
+ Package() { 0x001cffff, 2, \_SB.PCI0.LPCB.LNKC, 0 },
+ Package() { 0x001cffff, 3, \_SB.PCI0.LPCB.LNKD, 0 },
+ // USB and EHCI 0:1d.x
+ Package() { 0x001dffff, 0, \_SB.PCI0.LPCB.LNKH, 0 },
+ Package() { 0x001dffff, 1, \_SB.PCI0.LPCB.LNKD, 0 },
+ Package() { 0x001dffff, 2, \_SB.PCI0.LPCB.LNKC, 0 },
+ Package() { 0x001dffff, 3, \_SB.PCI0.LPCB.LNKA, 0 },
+ // AC97 0:1e.2, 0:1e.3
+ Package() { 0x001effff, 0, \_SB.PCI0.LPCB.LNKG, 0 },
+ Package() { 0x001effff, 1, \_SB.PCI0.LPCB.LNKE, 0 },
+ // LPC device 0:1f.0
+ Package() { 0x001fffff, 0, \_SB.PCI0.LPCB.LNKC, 0 },
+ Package() { 0x001fffff, 1, \_SB.PCI0.LPCB.LNKD, 0 },
+ })
+ }
+}
+
--- /dev/null
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+/* This is board specific information: IRQ routing for the
+ * 0:1e.0 PCI bridge of the ICH7
+ */
+
+If (PICM) {
+ Return (Package() {
+ Package() { 0x0000ffff, 0, 0, 21},
+ Package() { 0x0000ffff, 1, 0, 22},
+ Package() { 0x0000ffff, 2, 0, 23},
+ Package() { 0x0000ffff, 3, 0, 20},
+
+ Package() { 0x0001ffff, 0, 0, 22},
+ Package() { 0x0001ffff, 1, 0, 21},
+ Package() { 0x0001ffff, 2, 0, 20},
+ Package() { 0x0001ffff, 3, 0, 23},
+
+ Package() { 0x0002ffff, 0, 0, 18},
+ Package() { 0x0002ffff, 1, 0, 19},
+ Package() { 0x0002ffff, 2, 0, 17},
+ Package() { 0x0002ffff, 3, 0, 16},
+
+ Package() { 0x0003ffff, 0, 0, 19},
+ Package() { 0x0003ffff, 1, 0, 18},
+ Package() { 0x0003ffff, 2, 0, 21},
+ Package() { 0x0003ffff, 3, 0, 22},
+
+ Package() { 0x0005ffff, 0, 0, 17},
+ Package() { 0x0005ffff, 1, 0, 20},
+ Package() { 0x0005ffff, 2, 0, 22},
+ Package() { 0x0005ffff, 3, 0, 21},
+
+ Package() { 0x0008ffff, 0, 0, 20},
+ })
+} Else {
+ Return (Package() {
+ Package() { 0x0000ffff, 0, \_SB.PCI0.LPCB.LNKF, 0},
+ Package() { 0x0000ffff, 1, \_SB.PCI0.LPCB.LNKG, 0},
+ Package() { 0x0000ffff, 2, \_SB.PCI0.LPCB.LNKH, 0},
+ Package() { 0x0000ffff, 3, \_SB.PCI0.LPCB.LNKE, 0},
+
+ Package() { 0x0001ffff, 0, \_SB.PCI0.LPCB.LNKG, 0},
+ Package() { 0x0001ffff, 1, \_SB.PCI0.LPCB.LNKF, 0},
+ Package() { 0x0001ffff, 2, \_SB.PCI0.LPCB.LNKE, 0},
+ Package() { 0x0001ffff, 3, \_SB.PCI0.LPCB.LNKH, 0},
+
+ Package() { 0x0002ffff, 0, \_SB.PCI0.LPCB.LNKC, 0},
+ Package() { 0x0002ffff, 1, \_SB.PCI0.LPCB.LNKD, 0},
+ Package() { 0x0002ffff, 2, \_SB.PCI0.LPCB.LNKB, 0},
+ Package() { 0x0002ffff, 3, \_SB.PCI0.LPCB.LNKA, 0},
+
+ Package() { 0x0003ffff, 0, \_SB.PCI0.LPCB.LNKD, 0},
+ Package() { 0x0003ffff, 1, \_SB.PCI0.LPCB.LNKC, 0},
+ Package() { 0x0003ffff, 2, \_SB.PCI0.LPCB.LNKF, 0},
+ Package() { 0x0003ffff, 3, \_SB.PCI0.LPCB.LNKG, 0},
+
+ Package() { 0x0005ffff, 0, \_SB.PCI0.LPCB.LNKB, 0},
+ Package() { 0x0005ffff, 1, \_SB.PCI0.LPCB.LNKE, 0},
+ Package() { 0x0005ffff, 2, \_SB.PCI0.LPCB.LNKG, 0},
+ Package() { 0x0005ffff, 3, \_SB.PCI0.LPCB.LNKF, 0},
+
+ Package() { 0x0008ffff, 0, \_SB.PCI0.LPCB.LNKE, 0},
+ })
+}
+
--- /dev/null
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+Device (SLPB)
+{
+ Name(_HID, EisaId("PNP0C0E"))
+
+ // Wake
+ Name(_PRW, Package(){0x1d, 0x04})
+}
+
+Device (PWRB)
+{
+ Name(_HID, EisaId("PNP0C0C"))
+
+ // Wake
+ Name(_PRW, Package(){0x1d, 0x04})
+}
+
--- /dev/null
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+/* The APM port can be used for generating software SMIs */
+
+OperationRegion (APMP, SystemIO, 0xb2, 2)
+Field (APMP, ByteAcc, NoLock, Preserve)
+{
+ APMC, 8, // APM command
+ APMS, 8 // APM status
+}
+
+/* Port 80 POST */
+
+OperationRegion (POST, SystemIO, 0x80, 1)
+Field (POST, ByteAcc, Lock, Preserve)
+{
+ DBG0, 8
+}
+
+/* SMI I/O Trap */
+Method(TRAP, 1, Serialized)
+{
+ Store (Arg0, SMIF) // SMI Function
+ Store (0, TRP0) // Generate trap
+ Return (SMIF) // Return value of SMI handler
+}
+
+/* The _PIC method is called by the OS to choose between interrupt
+ * routing via the i8259 interrupt controller or the APIC.
+ *
+ * _PIC is called with a parameter of 0 for i8259 configuration and
+ * with a parameter of 1 for Local Apic/IOAPIC configuration.
+ */
+
+Method(_PIC, 1)
+{
+ // Remember the OS' IRQ routing choice.
+ Store(Arg0, PICM)
+}
+
+/* The _PTS method (Prepare To Sleep) is called before the OS is
+ * entering a sleep state. The sleep state number is passed in Arg0
+ */
+
+Method(_PTS,1)
+{
+ // Call a trap so SMI can prepare for Sleep as well.
+ // TRAP(0x55)
+}
+
+/* The _WAK method is called on system wakeup */
+
+Method(_WAK,1)
+{
+ // CPU specific part
+
+ // Notify PCI Express slots in case a card
+ // was inserted while a sleep state was active.
+
+ // Are we going to S3?
+ If (LEqual(Arg0, 3)) {
+ // ..
+ }
+
+ // Are we going to S4?
+ If (LEqual(Arg0, 4)) {
+ // ..
+ }
+
+ // TODO: Windows XP SP2 P-State restore
+
+ Return(Package(){0,0})
+}
+
--- /dev/null
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+
+Device (SIO1)
+{
+ Name (_HID, EISAID("PNP0A05"))
+ Name (_UID, 1)
+
+ Device (UAR1)
+ {
+ Name(_HID, EISAID("PNP0501"))
+ Name(_UID, 1)
+
+ // Some methods need an implementation here:
+ // missing: _STA, _DIS, _CRS, _PRS,
+ // missing: _SRS, _PS0, _PS3
+ }
+
+ Device (UAR2)
+ {
+ Name(_HID, EISAID("PNP0501"))
+ Name(_UID, 2)
+
+ // Some methods need an implementation here:
+ // missing: _STA, _DIS, _CRS, _PRS,
+ // missing: _SRS, _PS0, _PS3
+ }
+}
+
--- /dev/null
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+// Thermal Zone
+
+Scope (\_TZ)
+{
+ ThermalZone (THRM)
+ {
+
+ // FIXME these could/should be read from the
+ // GNVS area, so they can be controlled by
+ // coreboot
+ Name(TC1V, 0x04)
+ Name(TC2V, 0x03)
+ Name(TSPV, 0x64)
+
+ // At which temperature should the OS start
+ // active cooling?
+ Method (_AC0, 0, Serialized)
+ {
+ Return (0xf5c) // Value for Rocky
+ }
+
+ // Method (_AC1, 0, Serialized)
+ // {
+ // Return (0xf5c)
+ // }
+
+ // Critical shutdown temperature
+ Method (_CRT, 0, Serialized)
+ {
+ Return (Add (0x0aac, 0x50)) // FIXME
+ }
+
+ // CPU throttling start temperature
+ Method (_PSV, 0, Serialized)
+ {
+ Return (0xaaf) // FIXME
+ }
+
+ // Get DTS Temperature
+ Method (_TMP, 0, Serialized)
+ {
+ Return (0xaac) // FIXME
+ }
+
+ // Processors used for active cooling
+ Method (_PSL, 0, Serialized)
+ {
+ If (MPEN) {
+ Return (Package() {\_PR.CPU1, \_PR.CPU2})
+ }
+ Return (Package() {\_PR.CPU1})
+ }
+
+ // TC1 value for passive cooling
+ Method (_TC1, 0, Serialized)
+ {
+ Return (TC1V)
+ }
+
+ // TC2 value for passive cooling
+ Method (_TC2, 0, Serialized)
+ {
+ Return (TC2V)
+ }
+
+ // Sampling period for passive cooling
+ Method (_TSP, 0, Serialized)
+ {
+ Return (TSPV)
+ }
+
+
+ }
+}
+
--- /dev/null
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+// Brightness write
+Method (BRTW, 1, Serialized)
+{
+ // TODO
+}
+
+// Hot Key Display Switch
+Method (HKDS, 1, Serialized)
+{
+ // TODO
+}
+
+// Lid Switch Display Switch
+Method (LSDS, 1, Serialized)
+{
+ // TODO
+}
+
+// Brightness Notification
+Method(BRTN,1,Serialized)
+{
+ // TODO (no displays defined yet)
+}
+
--- /dev/null
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <types.h>
+#include <string.h>
+#include <console/console.h>
+#include <arch/acpi.h>
+#include <arch/acpigen.h>
+#include <arch/smp/mpspec.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <cpu/x86/msr.h>
+#include "dmi.h"
+
+#define OLD_ACPI 0
+
+extern unsigned char AmlCode[];
+#if CONFIG_HAVE_ACPI_SLIC
+unsigned long acpi_create_slic(unsigned long current);
+#endif
+void generate_cpu_entries(void); // from cpu/intel/speedstep
+unsigned long acpi_fill_mcfg(unsigned long current); // from northbridge/intel/i945
+
+#if OLD_ACPI
+typedef struct acpi_oemb {
+ acpi_header_t header;
+ u8 ss;
+ u16 iost;
+ u32 topm;
+ u32 roms;
+ u32 mg1b;
+ u32 mg1l;
+ u32 mg2b;
+ u32 mg2l;
+ u8 rsvd;
+ u8 dmax;
+ u32 hpta;
+ u32 cpb0;
+ u32 cpb1;
+ u32 cpb2;
+ u32 cpb3;
+ u8 assb;
+ u8 aotb;
+ u32 aaxb;
+ u8 smif;
+ u8 dtse;
+ u8 dts1;
+ u8 dts2;
+ u8 mpen;
+} __attribute__((packed)) acpi_oemb_t;
+#endif
+
+typedef struct acpi_gnvs {
+ // 0x00
+ u16 osys;
+ u8 smif;
+ u8 reserved[13];
+ // 0x10
+ u8 mpen;
+} __attribute__((packed)) acpi_gnvs_t;
+
+#if OLD_ACPI
+void acpi_create_oemb(acpi_oemb_t *oemb)
+{
+ acpi_header_t *header = &(oemb->header);
+ unsigned long tolud;
+
+ memset (oemb, 0, sizeof(*oemb));
+
+ /* fill out header fields */
+ memcpy(header->signature, "OEMB", 4);
+ memcpy(header->oem_id, OEM_ID, 6);
+ memcpy(header->oem_table_id, "COREBOOT", 8);
+ memcpy(header->asl_compiler_id, ASLC, 4);
+
+ header->length = sizeof(acpi_oemb_t);
+ header->revision = 1;
+
+ oemb->ss = 0x09; // ss1 + ss 4
+ oemb->iost = 0x0403; // ??
+
+ tolud = pci_read_config32(dev_find_slot(0, PCI_DEVFN(2, 0)), 0x5c);
+ oemb->topm = tolud;
+
+ oemb->roms = 0xfff00000; // 1M hardcoded
+
+ oemb->mg1b = 0x000d0000;
+ oemb->mg1l = 0x00010000;
+
+ oemb->mg2b = tolud;
+ oemb->mg2l = 0-tolud;
+
+ oemb->dmax = 0x87;
+ oemb->hpta = 0x000e36c0;
+
+ header->checksum =
+ acpi_checksum((void *) oemb, sizeof(acpi_oemb_t));
+
+};
+#endif
+
+void acpi_create_gnvs(acpi_gnvs_t *gnvs)
+{
+ memset((void *)gnvs, 0, sizeof(*gnvs));
+ gnvs->mpen = 1;
+}
+
+void acpi_create_intel_hpet(acpi_hpet_t * hpet)
+{
+#define HPET_ADDR 0xfed00000ULL
+ acpi_header_t *header = &(hpet->header);
+ acpi_addr_t *addr = &(hpet->addr);
+
+ memset((void *) hpet, 0, sizeof(acpi_hpet_t));
+
+ /* fill out header fields */
+ memcpy(header->signature, "HPET", 4);
+ memcpy(header->oem_id, OEM_ID, 6);
+ memcpy(header->oem_table_id, "COREBOOT", 8);
+ memcpy(header->asl_compiler_id, ASLC, 4);
+
+ header->length = sizeof(acpi_hpet_t);
+ header->revision = 1;
+
+ /* fill out HPET address */
+ addr->space_id = 0; /* Memory */
+ addr->bit_width = 64;
+ addr->bit_offset = 0;
+ addr->addrl = HPET_ADDR & 0xffffffff;
+ addr->addrh = HPET_ADDR >> 32;
+
+ hpet->id = 0x8086a201; /* Intel */
+ hpet->number = 0x00;
+ hpet->min_tick = 0x0080;
+
+ header->checksum =
+ acpi_checksum((void *) hpet, sizeof(acpi_hpet_t));
+}
+
+#define IO_APIC_ADDR 0xfec00000UL
+
+unsigned long acpi_fill_madt(unsigned long current)
+{
+ /* Local APICs */
+ current = acpi_create_madt_lapics(current);
+
+ /* IOAPIC */
+ current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current,
+ 2, IO_APIC_ADDR, 0);
+
+ /* INT_SRC_OVR */
+ current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
+ current, 0, 0, 2, 0);
+ current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
+ current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_HIGH);
+
+ return current;
+}
+
+unsigned long acpi_fill_ssdt_generator(unsigned long current, const char *oem_table_id)
+{
+ generate_cpu_entries();
+ return (unsigned long) (acpigen_get_current());
+}
+
+unsigned long acpi_fill_slit(unsigned long current)
+{
+ // Not implemented
+ return current;
+}
+
+unsigned long acpi_fill_srat(unsigned long current)
+{
+ /* No NUMA, no SRAT */
+ return current;
+}
+
+void smm_setup_structures(void *gnvs, void *tcg, void *smi1);
+
+#define ALIGN_CURRENT current = ((current + 0x0f) & -0x10)
+unsigned long write_acpi_tables(unsigned long start)
+{
+ unsigned long current;
+ int i;
+ acpi_rsdp_t *rsdp;
+ acpi_rsdt_t *rsdt;
+ acpi_hpet_t *hpet;
+ acpi_madt_t *madt;
+ acpi_mcfg_t *mcfg;
+ acpi_fadt_t *fadt;
+ acpi_facs_t *facs;
+#if CONFIG_HAVE_ACPI_SLIC
+ acpi_header_t *slic;
+#endif
+#if OLD_ACPI
+ acpi_oemb_t *oemb;
+#endif
+ acpi_gnvs_t *gnvs;
+ acpi_header_t *ssdt;
+ acpi_header_t *dsdt;
+
+ current = start;
+
+ /* Align ACPI tables to 16byte */
+ ALIGN_CURRENT;
+
+ printk_info("ACPI: Writing ACPI tables at %lx.\n", start);
+
+ /* We need at least an RSDP and an RSDT Table */
+ rsdp = (acpi_rsdp_t *) current;
+ current += sizeof(acpi_rsdp_t);
+ ALIGN_CURRENT;
+ rsdt = (acpi_rsdt_t *) current;
+ current += sizeof(acpi_rsdt_t);
+ ALIGN_CURRENT;
+
+ /* clear all table memory */
+ memset((void *) start, 0, current - start);
+
+ acpi_write_rsdp(rsdp, rsdt, NULL);
+ acpi_write_rsdt(rsdt);
+
+ /*
+ * We explicitly add these tables later on:
+ */
+ printk_debug("ACPI: * HPET\n");
+
+ hpet = (acpi_hpet_t *) current;
+ current += sizeof(acpi_hpet_t);
+ ALIGN_CURRENT;
+ acpi_create_intel_hpet(hpet);
+ acpi_add_table(rsdp, hpet);
+
+ /* If we want to use HPET Timers Linux wants an MADT */
+ printk_debug("ACPI: * MADT\n");
+
+ madt = (acpi_madt_t *) current;
+ acpi_create_madt(madt);
+ current += madt->header.length;
+ ALIGN_CURRENT;
+ acpi_add_table(rsdp, madt);
+
+ printk_debug("ACPI: * MCFG\n");
+ mcfg = (acpi_mcfg_t *) current;
+ acpi_create_mcfg(mcfg);
+ current += mcfg->header.length;
+ ALIGN_CURRENT;
+ acpi_add_table(rsdp, mcfg);
+
+#if OLD_ACPI
+ printk_debug("ACPI: * OEMB\n");
+ oemb=(acpi_oemb_t *)current;
+ current += sizeof(acpi_oemb_t);
+ ALIGN_CURRENT;
+ acpi_create_oemb(oemb);
+ acpi_add_table(rsdp, oemb);
+#endif
+
+ printk_debug("ACPI: * FACS\n");
+ facs = (acpi_facs_t *) current;
+ current += sizeof(acpi_facs_t);
+ ALIGN_CURRENT;
+ acpi_create_facs(facs);
+
+ dsdt = (acpi_header_t *) current;
+ current += ((acpi_header_t *) AmlCode)->length;
+ memcpy((void *) dsdt, (void *) AmlCode,
+ ((acpi_header_t *) AmlCode)->length);
+
+#if OLD_ACPI
+ for (i=0; i < dsdt->length; i++) {
+ if (*(u32*)(((u32)dsdt) + i) == 0xC0DEBEEF) {
+ printk_debug("ACPI: Patching up DSDT at offset 0x%04x -> 0x%08x\n", i, 0x24 + (u32)oemb);
+ *(u32*)(((u32)dsdt) + i) = 0x24 + (u32)oemb;
+ break;
+ }
+ }
+#endif
+
+ ALIGN_CURRENT;
+
+ /* Pack GNVS into the ACPI table area */
+ for (i=0; i < dsdt->length; i++) {
+ if (*(u32*)(((u32)dsdt) + i) == 0xC0DEBABE) {
+ printk_debug("ACPI: Patching up global NVS in DSDT at offset 0x%04x -> 0x%08x\n", i, current);
+ *(u32*)(((u32)dsdt) + i) = current; // 0x92 bytes
+ break;
+ }
+ }
+
+ /* And fill it */
+ acpi_create_gnvs(current);
+
+ current += 0x100;
+ ALIGN_CURRENT;
+
+ /* And tell SMI about it */
+ smm_setup_structures((void *)current, NULL, NULL);
+
+ /* We patched up the DSDT, so we need to recalculate the checksum */
+ dsdt->checksum = 0;
+ dsdt->checksum = acpi_checksum((void *)dsdt, dsdt->length);
+
+ printk_debug("ACPI: * DSDT @ %p Length %x\n", dsdt,
+ dsdt->length);
+
+#if CONFIG_HAVE_ACPI_SLIC
+ printk_debug("ACPI: * SLIC\n");
+ slic = (acpi_header_t *)current;
+ current += acpi_create_slic(current);
+ ALIGN_CURRENT;
+ acpi_add_table(rsdp, slic);
+#endif
+
+ printk_debug("ACPI: * FADT\n");
+ fadt = (acpi_fadt_t *) current;
+ current += sizeof(acpi_fadt_t);
+ ALIGN_CURRENT;
+
+ acpi_create_fadt(fadt, facs, dsdt);
+ acpi_add_table(rsdp, fadt);
+
+ printk_debug("ACPI: * SSDT\n");
+ ssdt = (acpi_header_t *)current;
+ acpi_create_ssdt_generator(ssdt, "DYNADATA");
+ current += ssdt->length;
+ acpi_add_table(rsdp, ssdt);
+
+ printk_debug("current = %lx\n", current);
+
+ printk_debug("ACPI: * DMI (Linux workaround)\n");
+ memcpy((void *)0xfff80, dmi_table, DMI_TABLE_SIZE);
+#if CONFIG_WRITE_HIGH_TABLES == 1
+ memcpy((void *)current, dmi_table, DMI_TABLE_SIZE);
+ current += DMI_TABLE_SIZE;
+ ALIGN_CURRENT;
+#endif
+
+ printk_info("ACPI: done.\n");
+ return current;
+}
--- /dev/null
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2008 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+// __ROMCC__ means: use "unsigned" for device, not a struct.
+#define __ROMCC__
+
+#include <stdint.h>
+#include <string.h>
+#include <arch/io.h>
+#include <arch/romcc_io.h>
+#include <device/pci_def.h>
+#include <device/pnp_def.h>
+#include <cpu/x86/lapic.h>
+
+#include "superio/smsc/lpc47m15x/lpc47m15x.h"
+
+#include "option_table.h"
+#include "pc80/mc146818rtc_early.c"
+
+#include "pc80/serial.c"
+#include "arch/i386/lib/console.c"
+#include <cpu/x86/bist.h>
+
+#if CONFIG_USBDEBUG_DIRECT
+#define DBGP_DEFAULT 1
+#include "southbridge/intel/i82801gx/i82801gx_usb_debug.c"
+#include "pc80/usbdebug_direct_serial.c"
+#endif
+
+#include "lib/ramtest.c"
+#include "southbridge/intel/i82801gx/i82801gx_early_smbus.c"
+#include "reset.c"
+#include "superio/smsc/lpc47m15x/lpc47m15x_early_serial.c"
+
+#include "northbridge/intel/i945/udelay.c"
+
+#define SERIAL_DEV PNP_DEV(0x2e, W83627THG_SP1)
+
+#include "southbridge/intel/i82801gx/i82801gx.h"
+static void setup_ich7_gpios(void)
+{
+ /* TODO: This is highly board specific and should be moved */
+ printk_debug(" GPIOS...");
+ /* General Registers */
+ outl(0x3f3df7c1, DEFAULT_GPIOBASE + 0x00); /* GPIO_USE_SEL */
+ outl(0xc6fcbfc3, DEFAULT_GPIOBASE + 0x04); /* GP_IO_SEL */
+ outl(0xecfefdff, DEFAULT_GPIOBASE + 0x0c); /* GP_LVL */
+ /* Output Control Registers */
+ outl(0x00040000, DEFAULT_GPIOBASE + 0x18); /* GPO_BLINK */
+ /* Input Control Registers */
+ outl(0x0000a000, DEFAULT_GPIOBASE + 0x2c); /* GPI_INV */
+ outl(0x000000ff, DEFAULT_GPIOBASE + 0x30); /* GPIO_USE_SEL2 */
+ outl(0x000000bf, DEFAULT_GPIOBASE + 0x34); /* GP_IO_SEL2 */
+ outl(0x000300fd, DEFAULT_GPIOBASE + 0x38); /* GP_LVL */
+}
+
+#include "northbridge/intel/i945/early_init.c"
+
+static inline int spd_read_byte(unsigned device, unsigned address)
+{
+ return smbus_read_byte(device, address);
+}
+
+#define CHANNEL_XOR_RANDOMIZATION 1
+#include "northbridge/intel/i945/raminit.h"
+#include "northbridge/intel/i945/raminit.c"
+#include "northbridge/intel/i945/reset_test.c"
+#include "northbridge/intel/i945/errata.c"
+#include "debug.c"
+
+static void ich7_enable_lpc(void)
+{
+ // Enable Serial IRQ
+ pci_write_config8(PCI_DEV(0, 0x1f, 0), 0x64, 0xd0);
+ // Set COM1/COM2 decode range
+ pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x80, 0x0010);
+ // Enable COM1
+ pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x82, 0x140d);
+ // Enable SuperIO Power Management Events
+ pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x84, 0x007c0681);
+}
+
+
+/* This box has two superios, so enabling serial becomes slightly excessive.
+ * We disable a lot of stuff to make sure that there are no conflicts between
+ * the two. Also set up the GPIOs from the beginning. This is the "no schematic
+ * but safe anyways" method.
+ */
+static void early_superio_config_lpc47m15x(void)
+{
+ device_t dev;
+
+ dev=PNP_DEV(0x2e, LPC47M15X_SP1);
+ pnp_enter_conf_state(dev);
+
+ pnp_set_logical_device(dev);
+ pnp_set_enable(dev, 0);
+ pnp_set_iobase(dev, PNP_IDX_IO0, 0x3f8);
+ pnp_set_irq(dev, PNP_IDX_IRQ0, 4);
+ pnp_set_enable(dev, 1);
+
+ /* Enable SuperIO PM */
+ dev=PNP_DEV(0x2e, LPC47M15X_PME);
+ pnp_set_logical_device(dev);
+ pnp_set_enable(dev, 0);
+ pnp_set_iobase(dev, PNP_IDX_IO0, 0x680);
+ pnp_set_enable(dev, 1);
+
+ pnp_exit_conf_state(dev);
+}
+
+static void rcba_config(void)
+{
+ /* Set up virtual channel 0 */
+ //RCBA32(0x0014) = 0x80000001;
+ //RCBA32(0x001c) = 0x03128010;
+
+ /* Device 1f interrupt pin register */
+ RCBA32(0x3100) = 0x00042210;
+ /* Device 1d interrupt pin register */
+ RCBA32(0x310c) = 0x00214321;
+
+ /* dev irq route register */
+ RCBA16(0x3140) = 0x0132;
+ RCBA16(0x3142) = 0x0146;
+ RCBA16(0x3144) = 0x0237;
+ RCBA16(0x3146) = 0x3201;
+ RCBA16(0x3148) = 0x0146;
+
+ /* Enable IOAPIC */
+ RCBA8(0x31ff) = 0x03;
+
+ /* Enable upper 128bytes of CMOS */
+ RCBA32(0x3400) = (1 << 2);
+
+ /* Disable unused devices */
+ //RCBA32(0x3418) = FD_PCIE6|FD_PCIE5|FD_PCIE4|FD_ACMOD|FD_ACAUD|FD_PATA;
+ // RCBA32(0x3418) |= (1 << 0); // Required.
+ // FIXME look me up!
+ RCBA32(0x3418) = 0x003204e1;
+
+ /* Enable PCIe Root Port Clock Gate */
+ // RCBA32(0x341c) = 0x00000001;
+}
+
+static void early_ich7_init(void)
+{
+ uint8_t reg8;
+ uint32_t reg32;
+
+ // program secondary mlt XXX byte?
+ pci_write_config8(PCI_DEV(0, 0x1e, 0), 0x1b, 0x20);
+
+ // reset rtc power status
+ reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xa4);
+ reg8 &= ~(1 << 2);
+ pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xa4, reg8);
+
+ // usb transient disconnect
+ reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xad);
+ reg8 |= (3 << 0);
+ pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xad, reg8);
+
+ reg32 = pci_read_config32(PCI_DEV(0, 0x1d, 7), 0xfc);
+ reg32 |= (1 << 29) | (1 << 17);
+ pci_write_config32(PCI_DEV(0, 0x1d, 7), 0xfc, reg32);
+
+ reg32 = pci_read_config32(PCI_DEV(0, 0x1d, 7), 0xdc);
+ reg32 |= (1 << 31) | (1 << 27);
+ pci_write_config32(PCI_DEV(0, 0x1d, 7), 0xdc, reg32);
+
+ RCBA32(0x0088) = 0x0011d000;
+ RCBA16(0x01fc) = 0x060f;
+ RCBA32(0x01f4) = 0x86000040;
+ RCBA32(0x0214) = 0x10030549;
+ RCBA32(0x0218) = 0x00020504;
+ RCBA8(0x0220) = 0xc5;
+ reg32 = RCBA32(0x3410);
+ reg32 |= (1 << 6);
+ RCBA32(0x3410) = reg32;
+ reg32 = RCBA32(0x3430);
+ reg32 &= ~(3 << 0);
+ reg32 |= (1 << 0);
+ RCBA32(0x3430) = reg32;
+ RCBA32(0x3418) |= (1 << 0);
+ RCBA16(0x0200) = 0x2008;
+ RCBA8(0x2027) = 0x0d;
+ RCBA16(0x3e08) |= (1 << 7);
+ RCBA16(0x3e48) |= (1 << 7);
+ RCBA32(0x3e0e) |= (1 << 7);
+ RCBA32(0x3e4e) |= (1 << 7);
+
+ // next step only on ich7m b0 and later:
+ reg32 = RCBA32(0x2034);
+ reg32 &= ~(0x0f << 16);
+ reg32 |= (5 << 16);
+ RCBA32(0x2034) = reg32;
+}
+
+#if CONFIG_USE_FALLBACK_IMAGE == 1
+#include "southbridge/intel/i82801gx/cmos_failover.c"
+#endif
+
+#include <cbmem.h>
+
+// Now, this needs to be included because it relies on the symbol
+// __ROMCC_ being set during CAR stage (in order to compile the
+// BSS free versions of the functions). Either rewrite the code
+// to be always BSS free, or invent a flag that's better suited than
+// __ROMCC__ to determine whether we're in ram init stage (stage 1)
+//
+#include "lib/cbmem.c"
+
+void real_main(unsigned long bist)
+{
+ u32 reg32;
+ int boot_mode = 0;
+
+ if (bist == 0) {
+ enable_lapic();
+ }
+
+ ich7_enable_lpc();
+ early_superio_config_lpc47m15x();
+
+ /* Set up the console */
+ uart_init();
+
+#if CONFIG_USBDEBUG_DIRECT
+ i82801gx_enable_usbdebug_direct(DBGP_DEFAULT);
+ early_usbdebug_direct_init();
+#endif
+
+ console_init();
+
+ /* Halt if there was a built in self test failure */
+ report_bist_failure(bist);
+
+ if (MCHBAR16(SSKPD) == 0xCAFE) {
+ printk_debug("soft reset detected.\n");
+ boot_mode = 1;
+ }
+
+ /* Perform some early chipset initialization required
+ * before RAM initialization can work
+ */
+ i945_early_initialization();
+
+ /* Read PM1_CNT */
+ reg32 = inl(DEFAULT_PMBASE + 0x04);
+ printk_debug("PM1_CNT: %08x\n", reg32);
+ if (((reg32 >> 10) & 7) == 5) {
+#if CONFIG_HAVE_ACPI_RESUME
+ printk_debug("Resume from S3 detected.\n");
+ boot_mode = 2;
+ /* Clear SLP_TYPE. This will break stage2 but
+ * we care for that when we get there.
+ */
+ outl(reg32 & ~(7 << 10), DEFAULT_PMBASE + 0x04);
+#else
+ printk_debug("Resume from S3 detected, but disabled.\n");
+#endif
+ }
+
+ /* Enable SPD ROMs and DDR-II DRAM */
+ enable_smbus();
+
+#if CONFIG_DEFAULT_CONSOLE_LOGLEVEL > 8
+ dump_spd_registers();
+#endif
+
+ sdram_initialize(boot_mode);
+
+ /* Perform some initialization that must run before stage2 */
+ early_ich7_init();
+
+ /* This should probably go away. Until now it is required
+ * and mainboard specific
+ */
+ rcba_config();
+
+ /* Chipset Errata! */
+ fixup_i945_errata();
+
+ /* Initialize the internal PCIe links before we go into stage2 */
+ i945_late_initialization();
+
+#if !CONFIG_HAVE_ACPI_RESUME
+#if CONFIG_DEFAULT_CONSOLE_LOGLEVEL > 8
+#if defined(DEBUG_RAM_SETUP)
+ sdram_dump_mchbar_registers();
+#endif
+
+ {
+ /* This will not work if TSEG is in place! */
+ u32 tom = pci_read_config32(PCI_DEV(0,2,0), 0x5c);
+
+ printk_debug("TOM: 0x%08x\n", tom);
+ ram_check(0x00000000, 0x000a0000);
+ //ram_check(0x00100000, tom);
+ }
+#endif
+#endif
+
+ MCHBAR16(SSKPD) = 0xCAFE;
+
+#if CONFIG_HAVE_ACPI_RESUME
+ /* Start address of high memory tables */
+ unsigned long high_ram_base = get_top_of_ram() - HIGH_MEMORY_SIZE;
+
+ /* If there is no high memory area, we didn't boot before, so
+ * this is not a resume. In that case we just create the cbmem toc.
+ */
+ if ((boot_mode == 2) && cbmem_reinit((u64)high_ram_base)) {
+ void *resume_backup_memory = cbmem_find(CBMEM_ID_RESUME);
+
+ /* copy 1MB - 64K to high tables ram_base to prevent memory corruption
+ * through stage 2. We could keep stuff like stack and heap in high tables
+ * memory completely, but that's a wonderful clean up task for another
+ * day.
+ */
+ if (resume_backup_memory)
+ memcpy(resume_backup_memory, CONFIG_RAMBASE, HIGH_MEMORY_SAVE);
+
+ /* Magic for S3 resume */
+ pci_write_config32(PCI_DEV(0, 0x00, 0), SKPAD, 0xcafed00d);
+ }
+#endif
+}
+
+#include "cpu/intel/model_106cx/cache_as_ram_disable.c"
--- /dev/null
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2008 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+extern struct chip_operations mainboard_ops;
+struct mainboard_config {
+ int nothing;
+};
--- /dev/null
+#
+# This file is part of the coreboot project.
+#
+# Copyright (C) 2007-2008 coresystems GmbH
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; version 2 of
+# the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+# MA 02110-1301 USA
+#
+
+# -----------------------------------------------------------------
+entries
+
+#start-bit length config config-ID name
+#0 8 r 0 seconds
+#8 8 r 0 alarm_seconds
+#16 8 r 0 minutes
+#24 8 r 0 alarm_minutes
+#32 8 r 0 hours
+#40 8 r 0 alarm_hours
+#48 8 r 0 day_of_week
+#56 8 r 0 day_of_month
+#64 8 r 0 month
+#72 8 r 0 year
+# -----------------------------------------------------------------
+# Status Register A
+#80 4 r 0 rate_select
+#84 3 r 0 REF_Clock
+#87 1 r 0 UIP
+# -----------------------------------------------------------------
+# Status Register B
+#88 1 r 0 auto_switch_DST
+#89 1 r 0 24_hour_mode
+#90 1 r 0 binary_values_enable
+#91 1 r 0 square-wave_out_enable
+#92 1 r 0 update_finished_enable
+#93 1 r 0 alarm_interrupt_enable
+#94 1 r 0 periodic_interrupt_enable
+#95 1 r 0 disable_clock_updates
+# -----------------------------------------------------------------
+# Status Register C
+#96 4 r 0 status_c_rsvd
+#100 1 r 0 uf_flag
+#101 1 r 0 af_flag
+#102 1 r 0 pf_flag
+#103 1 r 0 irqf_flag
+# -----------------------------------------------------------------
+# Status Register D
+#104 7 r 0 status_d_rsvd
+#111 1 r 0 valid_cmos_ram
+# -----------------------------------------------------------------
+# Diagnostic Status Register
+#112 8 r 0 diag_rsvd1
+
+# -----------------------------------------------------------------
+0 120 r 0 reserved_memory
+#120 264 r 0 unused
+
+# -----------------------------------------------------------------
+# RTC_BOOT_BYTE (coreboot hardcoded)
+384 1 e 4 boot_option
+385 1 e 4 last_boot
+388 4 r 0 reboot_bits
+#390 2 r 0 unused?
+
+# -----------------------------------------------------------------
+# coreboot config options: console
+392 3 e 5 baud_rate
+395 4 e 6 debug_level
+#399 1 r 0 unused
+
+# coreboot config options: cpu
+400 1 e 2 hyper_threading
+#401 7 r 0 unused
+
+# coreboot config options: southbridge
+408 1 e 1 nmi
+409 2 e 7 power_on_after_fail
+#411 5 r 0 unused
+
+# coreboot config options: bootloader
+416 512 s 0 boot_devices
+#928 80 r 0 unused
+
+# coreboot config options: check sums
+984 16 h 0 check_sum
+#1000 24 r 0 amd_reserved
+
+# ram initialization internal data
+1024 8 r 0 C0WL0REOST
+1032 8 r 0 C1WL0REOST
+1040 8 r 0 RCVENMT
+1048 4 r 0 C0DRT1
+1052 4 r 0 C1DRT1
+
+# -----------------------------------------------------------------
+
+enumerations
+
+#ID value text
+1 0 Disable
+1 1 Enable
+2 0 Enable
+2 1 Disable
+4 0 Fallback
+4 1 Normal
+5 0 115200
+5 1 57600
+5 2 38400
+5 3 19200
+5 4 9600
+5 5 4800
+5 6 2400
+5 7 1200
+6 1 Emergency
+6 2 Alert
+6 3 Critical
+6 4 Error
+6 5 Warning
+6 6 Notice
+6 7 Info
+6 8 Debug
+6 9 Spew
+7 0 Disable
+7 1 Enable
+7 2 Keep
+
+# -----------------------------------------------------------------
+checksums
+
+checksum 392 983 984
+
+
--- /dev/null
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2008 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#define SMBUS_MEM_DEVICE_START 0x50
+#define SMBUS_MEM_DEVICE_END 0x53
+#define SMBUS_MEM_DEVICE_INC 1
+
+static void print_pci_devices(void)
+{
+ device_t dev;
+ for(dev = PCI_DEV(0, 0, 0);
+ dev <= PCI_DEV(0, 0x1f, 0x7);
+ dev += PCI_DEV(0,0,1)) {
+ uint32_t id;
+ id = pci_read_config32(dev, PCI_VENDOR_ID);
+ if (((id & 0xffff) == 0x0000) || ((id & 0xffff) == 0xffff) ||
+ (((id >> 16) & 0xffff) == 0xffff) ||
+ (((id >> 16) & 0xffff) == 0x0000)) {
+ continue;
+ }
+ printk_debug("PCI: %02x:%02x.%02x", (dev >> 20) & 0xff,
+ (dev >> 15) & 0x1f, (dev >> 12) & 7);
+ printk_debug(" [%04x:%04x]\r\n", id &0xffff, id >> 16);
+ }
+}
+
+static void dump_pci_device(unsigned dev)
+{
+ int i;
+
+ printk_debug("PCI: %02x:%02x.%02x\r\n", (dev >> 20) & 0xff, (dev >> 15) & 0x1f, (dev >> 12) & 7);
+
+ for(i = 0; i <= 255; i++) {
+ unsigned char val;
+ if ((i & 0x0f) == 0) {
+ printk_debug("%02x:", i);
+ }
+ val = pci_read_config8(dev, i);
+ printk_debug(" %02x", val);
+ if ((i & 0x0f) == 0x0f) {
+ printk_debug("\r\n");
+ }
+ }
+}
+
+static void dump_pci_devices(void)
+{
+ device_t dev;
+ for(dev = PCI_DEV(0, 0, 0);
+ dev <= PCI_DEV(0, 0x1f, 0x7);
+ dev += PCI_DEV(0,0,1)) {
+ uint32_t id;
+ id = pci_read_config32(dev, PCI_VENDOR_ID);
+ if (((id & 0xffff) == 0x0000) || ((id & 0xffff) == 0xffff) ||
+ (((id >> 16) & 0xffff) == 0xffff) ||
+ (((id >> 16) & 0xffff) == 0x0000)) {
+ continue;
+ }
+ dump_pci_device(dev);
+ }
+}
+
+void dump_spd_registers(void)
+{
+ unsigned device;
+ device = SMBUS_MEM_DEVICE_START;
+ while(device <= SMBUS_MEM_DEVICE_END) {
+ int status = 0;
+ int i;
+ printk_debug("\r\ndimm %02x", device);
+
+ for(i = 0; (i < 256) ; i++) {
+ if ((i % 16) == 0) {
+ printk_debug("\r\n%02x: ", i);
+ }
+ status = smbus_read_byte(device, i);
+ if (status < 0) {
+ printk_debug("bad device: %02x\r\n", -status);
+ break;
+ }
+ printk_debug("%02x ", status);
+ }
+ device += SMBUS_MEM_DEVICE_INC;
+ printk_debug("\r\n");
+ }
+}
+
+static void dump_mem(unsigned start, unsigned end)
+{
+ unsigned i;
+ print_debug("dump_mem:");
+ for(i=start;i<end;i++) {
+ if((i & 0xf)==0) {
+#if CONFIG_USE_INIT
+ printk_debug("\r\n%08x:", i);
+#else
+ print_debug("\r\n");
+ print_debug_hex32(i);
+ print_debug(":");
+#endif
+ }
+#if CONFIG_USE_INIT
+ printk_debug(" %02x", (unsigned char)*((unsigned char *)i));
+#else
+ print_debug(" ");
+ print_debug_hex8((unsigned char)*((unsigned char *)i));
+#endif
+ }
+ print_debug("\r\n");
+ }
--- /dev/null
+##
+## This file is part of the coreboot project.
+##
+## Copyright (C) 2007-2008 coresystems GmbH
+##
+## This program is free software; you can redistribute it and/or
+## modify it under the terms of the GNU General Public License as
+## published by the Free Software Foundation; version 2 of
+## the License.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+## MA 02110-1301 USA
+##
+
+chip northbridge/intel/i945
+
+ device apic_cluster 0 on
+ chip cpu/intel/socket_441
+ device apic 0 on end
+ end
+ end
+
+ device pci_domain 0 on
+ device pci 00.0 on end # host bridge
+ device pci 01.0 off end # i945 PCIe root port
+ chip drivers/pci/onboard
+ device pci 02.0 on end # vga controller
+ # register "rom_address" = "0xfffc0000" # 256 KB image
+ # register "rom_address" = "0xfff80000" # 512 KB image
+ # register "rom_address" = "0xfff00000" # 1 MB image
+ end
+ device pci 02.1 on end # display controller
+
+ chip southbridge/intel/i82801gx
+ register "pirqa_routing" = "0x05"
+ register "pirqb_routing" = "0x07"
+ register "pirqc_routing" = "0x05"
+ register "pirqd_routing" = "0x07"
+ register "pirqe_routing" = "0x80"
+ register "pirqf_routing" = "0x80"
+ register "pirqg_routing" = "0x80"
+ register "pirqh_routing" = "0x06"
+
+ # GPI routing
+ # 0 No effect (default)
+ # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set)
+ # 2 SCI (if corresponding GPIO_EN bit is also set)
+ register "gpi13_routing" = "1"
+ register "gpe0_en" = "0x20000601"
+
+ register "ide_legacy_combined" = "0x1"
+ register "ide_enable_primary" = "0x1"
+ register "ide_enable_secondary" = "0x0"
+ register "sata_ahci" = "0x0"
+
+ device pci 1b.0 on end # High Definition Audio
+ device pci 1c.0 on end # PCIe
+ device pci 1c.1 on end # PCIe
+ device pci 1c.2 on end # PCIe
+ #device pci 1c.3 off end # PCIe port 4
+ #device pci 1c.4 off end # PCIe port 5
+ #device pci 1c.5 off end # PCIe port 6
+ device pci 1d.0 on end # USB UHCI
+ device pci 1d.1 on end # USB UHCI
+ device pci 1d.2 on end # USB UHCI
+ device pci 1d.3 on end # USB UHCI
+ device pci 1d.7 on end # USB2 EHCI
+ device pci 1e.0 on end # PCI bridge
+ #device pci 1e.2 off end # AC'97 Audio
+ #device pci 1e.3 off end # AC'97 Modem
+ device pci 1f.0 on # LPC bridge
+ chip superio/smsc/lpc47m15x
+ device pnp 2e.0 off # Floppy
+ end
+ device pnp 2e.3 off # Parport
+ end
+ device pnp 2e.4 on
+ io 0x60 = 0x3f8
+ irq 0x70 = 4
+ end
+ device pnp 2e.5 on
+ io 0x60 = 0x2f8
+ irq 0x70 = 3
+ irq 0xf1 = 4 # set IRMODE 0 # XXX not an irq
+ end
+ device pnp 2e.7 on # Keyboard+Mouse
+ io 0x60 = 0x60
+ io 0x62 = 0x64
+ irq 0x70 = 1
+ irq 0x72 = 12
+ irq 0xf0 = 0x82 # HW accel A20.
+ end
+ device pnp 2e.8 on # GAME
+ # all default
+ end
+ device pnp 2e.a on # PME
+ end
+ device pnp 2e.b on # MPU
+ end
+ end
+ end
+ #device pci 1f.1 off end # IDE
+ device pci 1f.2 on end # SATA
+ device pci 1f.3 on end # SMBus
+ #device pci 1f.4 off end # Realtek ID Codec
+ end
+ end
+end
--- /dev/null
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2008 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#define DMI_TABLE_SIZE 0x55
+
+static u8 dmi_table[DMI_TABLE_SIZE] = {
+ 0x5f, 0x53, 0x4d, 0x5f, 0x2d, 0x1f, 0x02, 0x03, 0x51, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x5f, 0x44, 0x4d, 0x49, 0x5f, 0xeb, 0xa8, 0x03, 0xa0, 0xff, 0x0f, 0x00, 0x01, 0x00, 0x23, 0x00,
+ 0x00, 0x14, 0x00, 0x00, 0x01, 0x02, 0x00, 0xe0, 0x03, 0x07, 0x90, 0xde, 0xcb, 0x7f, 0x00, 0x00,
+ 0x00, 0x00, 0x37, 0x01, 0x63, 0x6f, 0x72, 0x65, 0x73, 0x79, 0x73, 0x74, 0x65, 0x6d, 0x73, 0x20,
+ 0x47, 0x6d, 0x62, 0x48, 0x00, 0x32, 0x2e, 0x30, 0x00, 0x30, 0x33, 0x2f, 0x31, 0x33, 0x2f, 0x32,
+ 0x30, 0x30, 0x38, 0x00, 0x00
+};
--- /dev/null
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+DefinitionBlock(
+ "dsdt.aml",
+ "DSDT",
+ 0x02, // DSDT revision: ACPI v2.0
+ "COREv2", // OEM id
+ "COREBOOT", // OEM table id
+ 0x20090419 // OEM revision
+)
+{
+ // Some generic macros
+ #include "acpi/platform.asl"
+
+ // global NVS and variables
+ #include "../../../southbridge/intel/i82801gx/acpi/globalnvs.asl"
+
+ // General Purpose Events
+ //#include "acpi/gpe.asl"
+
+ // mainboard specific devices
+ #include "acpi/mainboard.asl"
+
+ // Thermal Zone
+ //#include "acpi/thermal.asl"
+
+ Scope (\_SB) {
+ Device (PCI0)
+ {
+ #include "../../../northbridge/intel/i945/acpi/i945.asl"
+ #include "../../../southbridge/intel/i82801gx/acpi/ich7.asl"
+ }
+ }
+
+ /* Chipset specific sleep states */
+ #include "../../../southbridge/intel/i82801gx/acpi/sleepstates.asl"
+}
--- /dev/null
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <string.h>
+#include <device/pci.h>
+#include <arch/acpi.h>
+
+/* FIXME: This needs to go into a separate .h file
+ * to be included by the ich7 smi handler, ich7 smi init
+ * code and the mainboard fadt.
+ */
+#define APM_CNT 0xb2
+#define CST_CONTROL 0x85
+#define PST_CONTROL 0x80
+#define ACPI_DISABLE 0x1e
+#define ACPI_ENABLE 0xe1
+#define GNVS_UPDATE 0xea
+
+void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt)
+{
+ acpi_header_t *header = &(fadt->header);
+ u16 pmbase = pci_read_config16(dev_find_slot(0, PCI_DEVFN(0x1f,0)), 0x40) & 0xfffe;
+
+ memset((void *) fadt, 0, sizeof(acpi_fadt_t));
+ memcpy(header->signature, "FACP", 4);
+ header->length = sizeof(acpi_fadt_t);
+ header->revision = 3;
+ memcpy(header->oem_id, "CORE ", 6);
+ memcpy(header->oem_table_id, "COREBOOT", 8);
+ memcpy(header->asl_compiler_id, "CORE", 4);
+ header->asl_compiler_revision = 1;
+
+ fadt->firmware_ctrl = (unsigned long) facs;
+ fadt->dsdt = (unsigned long) dsdt;
+ fadt->model = 1;
+ fadt->preferred_pm_profile = PM_MOBILE;
+
+ fadt->sci_int = 0x9;
+ fadt->smi_cmd = APM_CNT;
+ fadt->acpi_enable = ACPI_ENABLE;
+ fadt->acpi_disable = ACPI_DISABLE;
+ fadt->s4bios_req = 0x0;
+ fadt->pstate_cnt = PST_CONTROL;
+
+ fadt->pm1a_evt_blk = pmbase;
+ fadt->pm1b_evt_blk = 0x0;
+ fadt->pm1a_cnt_blk = pmbase + 0x4;
+ fadt->pm1b_cnt_blk = 0x0;
+ fadt->pm2_cnt_blk = pmbase + 0x20;
+ fadt->pm_tmr_blk = pmbase + 0x8;
+ fadt->gpe0_blk = pmbase + 0x28;
+ fadt->gpe1_blk = 0;
+
+ fadt->pm1_evt_len = 4;
+ fadt->pm1_cnt_len = 2;
+ // XXX: pm2_cnt_len is probably wrong. find out right value (hint: it's != 0)
+ fadt->pm2_cnt_len = 2;
+ fadt->pm_tmr_len = 4;
+ fadt->gpe0_blk_len = 8;
+ fadt->gpe1_blk_len = 0;
+ fadt->gpe1_base = 0;
+ fadt->cst_cnt = CST_CONTROL;
+ fadt->p_lvl2_lat = 1;
+ fadt->p_lvl3_lat = 85;
+ fadt->flush_size = 1024;
+ fadt->flush_stride = 16;
+ fadt->duty_offset = 1;
+ fadt->duty_width = 0;
+ fadt->day_alrm = 0xd;
+ fadt->mon_alrm = 0x00;
+ fadt->century = 0x00;
+ fadt->iapc_boot_arch = 0x03;
+
+ fadt->flags = ACPI_FADT_WBINVD | ACPI_FADT_C1_SUPPORTED |
+ ACPI_FADT_C2_MP_SUPPORTED | ACPI_FADT_SLEEP_BUTTON |
+ ACPI_FADT_S4_RTC_WAKE | ACPI_FADT_PLATFORM_CLOCK;
+
+ fadt->reset_reg.space_id = 0;
+ fadt->reset_reg.bit_width = 0;
+ fadt->reset_reg.bit_offset = 0;
+ fadt->reset_reg.resv = 0;
+ fadt->reset_reg.addrl = 0x0;
+ fadt->reset_reg.addrh = 0x0;
+
+ fadt->reset_value = 0;
+ fadt->x_firmware_ctl_l = (unsigned long)facs;
+ fadt->x_firmware_ctl_h = 0;
+ fadt->x_dsdt_l = (unsigned long)dsdt;
+ fadt->x_dsdt_h = 0;
+
+ fadt->x_pm1a_evt_blk.space_id = 1;
+ fadt->x_pm1a_evt_blk.bit_width = 32;
+ fadt->x_pm1a_evt_blk.bit_offset = 0;
+ fadt->x_pm1a_evt_blk.resv = 0;
+ fadt->x_pm1a_evt_blk.addrl = pmbase;
+ fadt->x_pm1a_evt_blk.addrh = 0x0;
+
+ fadt->x_pm1b_evt_blk.space_id = 1;
+ fadt->x_pm1b_evt_blk.bit_width = 0;
+ fadt->x_pm1b_evt_blk.bit_offset = 0;
+ fadt->x_pm1b_evt_blk.resv = 0;
+ fadt->x_pm1b_evt_blk.addrl = 0x0;
+ fadt->x_pm1b_evt_blk.addrh = 0x0;
+
+ fadt->x_pm1a_cnt_blk.space_id = 1;
+ fadt->x_pm1a_cnt_blk.bit_width = 16;
+ fadt->x_pm1a_cnt_blk.bit_offset = 0;
+ fadt->x_pm1a_cnt_blk.resv = 0;
+ fadt->x_pm1a_cnt_blk.addrl = pmbase + 0x4;
+ fadt->x_pm1a_cnt_blk.addrh = 0x0;
+
+ fadt->x_pm1b_cnt_blk.space_id = 1;
+ fadt->x_pm1b_cnt_blk.bit_width = 0;
+ fadt->x_pm1b_cnt_blk.bit_offset = 0;
+ fadt->x_pm1b_cnt_blk.resv = 0;
+ fadt->x_pm1b_cnt_blk.addrl = 0x0;
+ fadt->x_pm1b_cnt_blk.addrh = 0x0;
+
+ fadt->x_pm2_cnt_blk.space_id = 1;
+ fadt->x_pm2_cnt_blk.bit_width = 8;
+ fadt->x_pm2_cnt_blk.bit_offset = 0;
+ fadt->x_pm2_cnt_blk.resv = 0;
+ fadt->x_pm2_cnt_blk.addrl = pmbase + 0x20;
+ fadt->x_pm2_cnt_blk.addrh = 0x0;
+
+ fadt->x_pm_tmr_blk.space_id = 1;
+ fadt->x_pm_tmr_blk.bit_width = 32;
+ fadt->x_pm_tmr_blk.bit_offset = 0;
+ fadt->x_pm_tmr_blk.resv = 0;
+ fadt->x_pm_tmr_blk.addrl = pmbase + 0x8;
+ fadt->x_pm_tmr_blk.addrh = 0x0;
+
+ fadt->x_gpe0_blk.space_id = 1;
+ fadt->x_gpe0_blk.bit_width = 64;
+ fadt->x_gpe0_blk.bit_offset = 0;
+ fadt->x_gpe0_blk.resv = 0;
+ fadt->x_gpe0_blk.addrl = pmbase + 0x28;
+ fadt->x_gpe0_blk.addrh = 0x0;
+
+ fadt->x_gpe1_blk.space_id = 1;
+ fadt->x_gpe1_blk.bit_width = 0;
+ fadt->x_gpe1_blk.bit_offset = 0;
+ fadt->x_gpe1_blk.resv = 0;
+ fadt->x_gpe1_blk.addrl = 0x0;
+ fadt->x_gpe1_blk.addrh = 0x0;
+
+ header->checksum =
+ acpi_checksum((void *) fadt, header->length);
+}
--- /dev/null
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2008 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <arch/pirq_routing.h>
+
+const struct irq_routing_table intel_irq_routing_table = {
+ PIRQ_SIGNATURE, /* u32 signature */
+ PIRQ_VERSION, /* u16 version */
+ 32+16*18, /* There can be total 18 devices on the bus */
+ 0x00, /* Where the interrupt router lies (bus) */
+ (0x1f<<3)|0x0, /* Where the interrupt router lies (dev) */
+ 0, /* IRQs devoted exclusively to PCI usage */
+ 0x8086, /* Vendor */
+ 0x27b0, /* Device */
+ 0, /* miniport */
+ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */
+ 0xf, /* u8 checksum. */
+ {
+ /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */
+ {0x00,(0x01<<3)|0x0, {{0x60, 0xdcf8}, {0x61, 0xdcf8}, {0x62, 0xdcf8}, {0x63, 0x0dcd8}}, 0x0, 0x0}, // PCIe?
+ {0x00,(0x02<<3)|0x0, {{0x60, 0xdcf8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, // VGA
+ {0x00,(0x1e<<3)|0x0, {{0x61, 0xdcf8}, {0x68, 0xdcf8}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, // PCI bridge
+ {0x00,(0x1f<<3)|0x0, {{0x62, 0xdcf8}, {0x63, 0xdcd8}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, // LPC
+ {0x00,(0x1d<<3)|0x0, {{0x6b, 0xdcf8}, {0x63, 0xdcd8}, {0x62, 0xdcf8}, {0x60, 0x0dcf8}}, 0x0, 0x0}, // USB#1
+ {0x00,(0x1b<<3)|0x0, {{0x60, 0xdcf8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, // Audio device
+ {0x00,(0x1c<<3)|0x0, {{0x60, 0xdcf8}, {0x61, 0xdcf8}, {0x62, 0xdcf8}, {0x63, 0x0dcd8}}, 0x2, 0x0}, // PCIe bridge
+ {0x04,(0x00<<3)|0x0, {{0x60, 0xdcf8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, // Firewire
+ {0x04,(0x01<<3)|0x0, {{0x68, 0xdcf8}, {0x69, 0xdcf8}, {0x6a, 0xdcf8}, {0x6b, 0x0dcf8}}, 0x1, 0x0}, // PCI Bridge
+ {0x04,(0x02<<3)|0x0, {{0x69, 0xdcf8}, {0x6a, 0xdcf8}, {0x6b, 0xdcf8}, {0x68, 0x0dcf8}}, 0x2, 0x0},
+ {0x04,(0x03<<3)|0x0, {{0x6a, 0xdcf8}, {0x6b, 0xdcf8}, {0x68, 0xdcf8}, {0x69, 0x0dcf8}}, 0x3, 0x0},
+ {0x04,(0x04<<3)|0x0, {{0x6b, 0xdcf8}, {0x68, 0xdcf8}, {0x69, 0xdcf8}, {0x6a, 0x0dcf8}}, 0x4, 0x0},
+ {0x04,(0x05<<3)|0x0, {{0x63, 0xdcd8}, {0x62, 0xdcf8}, {0x61, 0xdcf8}, {0x60, 0x0dcf8}}, 0x5, 0x0},
+ {0x04,(0x06<<3)|0x0, {{0x62, 0xdcf8}, {0x61, 0xdcf8}, {0x60, 0xdcf8}, {0x63, 0x0dcd8}}, 0x6, 0x0},
+ {0x04,(0x09<<3)|0x0, {{0x69, 0xdcf8}, {0x6a, 0xdcf8}, {0x6b, 0xdcf8}, {0x68, 0x0dcf8}}, 0x9, 0x0},
+ {0x01,(0x00<<3)|0x0, {{0x60, 0xdcf8}, {0x61, 0xdcf8}, {0x62, 0xdcf8}, {0x63, 0x0dcd8}}, 0x0, 0x0}, // Ethernet 8168
+ {0x02,(0x00<<3)|0x0, {{0x60, 0xdcf8}, {0x61, 0xdcf8}, {0x62, 0xdcf8}, {0x63, 0x0dcd8}}, 0x9, 0x0},
+ {0x03,(0x00<<3)|0x0, {{0x61, 0xdcf8}, {0x62, 0xdcf8}, {0x63, 0xdcd8}, {0x60, 0x0dcf8}}, 0xa, 0x0},
+ }
+};
+
+unsigned long write_pirq_routing_table(unsigned long addr)
+{
+ return copy_pirq_routing_table(addr);
+}
+
--- /dev/null
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2008 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+
+#include <device/device.h>
+#include <console/console.h>
+#include <boot/tables.h>
+#include "chip.h"
+
+int add_northbridge_resources(struct lb_memory *mem);
+
+int add_mainboard_resources(struct lb_memory *mem)
+{
+ return add_northbridge_resources(mem);
+}
+
+struct chip_operations mainboard_ops = {
+ CHIP_NAME("Intel D945GCLF Mainboard")
+};
+
--- /dev/null
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <arch/io.h>
+#include <arch/romcc_io.h>
+#include <console/console.h>
+#include "../../../southbridge/intel/i82801gx/i82801gx_nvs.h"
+
+/* The southbridge SMI handler checks whether gnvs has a
+ * valid pointer before calling the trap handler
+ */
+extern global_nvs_t *gnvs;
+
+int mainboard_io_trap_handler(int smif)
+{
+ switch (smif) {
+ case 0x99:
+ printk_debug("Sample\n");
+ gnvs->smif = 0;
+ break;
+ default:
+ return 0;
+ }
+
+ /* On success, the IO Trap Handler returns 0
+ * On failure, the IO Trap Handler returns a value != 0
+ *
+ * For now, we force the return value to 0 and log all traps to
+ * see what's going on.
+ */
+ //gnvs->smif = 0;
+ return 1;
+}
+
+
--- /dev/null
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2008 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+
+#include <device/device.h>
+#include <device/pci.h>
+#include <console/console.h>
+#include <arch/smp/mpspec.h>
+#include <string.h>
+#include <stdint.h>
+
+void *smp_write_config_table(void *v)
+{
+ static const char sig[4] = "PCMP";
+ static const char oem[8] = "COREBOOT";
+ static const char productid[12] = "D945GCLF ";
+ struct mp_config_table *mc;
+ int i;
+ int max_pci_bus, isa_bus;
+
+ mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
+ memset(mc, 0, sizeof(*mc));
+
+ memcpy(mc->mpc_signature, sig, sizeof(sig));
+ mc->mpc_length = sizeof(*mc); /* initially just the header */
+ mc->mpc_spec = 0x04;
+ mc->mpc_checksum = 0; /* not yet computed */
+ memcpy(mc->mpc_oem, oem, sizeof(oem));
+ memcpy(mc->mpc_productid, productid, sizeof(productid));
+ mc->mpc_oemptr = 0;
+ mc->mpc_oemsize = 0;
+ mc->mpc_entry_count = 0; /* No entries yet... */
+ mc->mpc_lapic = LAPIC_ADDR;
+ mc->mpe_length = 0;
+ mc->mpe_checksum = 0;
+ mc->reserved = 0;
+
+ smp_write_processors(mc);
+
+ max_pci_bus = 5; // XXX read me from bridges.
+
+ /* ISA bus follows */
+ isa_bus = max_pci_bus + 1;
+
+ /* Bus: Bus ID Type */
+ for (i=0; i <= max_pci_bus; i++)
+ smp_write_bus(mc, i, "PCI ");
+
+ smp_write_bus(mc, isa_bus, "ISA ");
+
+ /* I/O APICs: APIC ID Version State Address */
+ smp_write_ioapic(mc, 2, 0x20, 0xfec00000);
+
+ /* Legacy Interrupts */
+
+ /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */
+ smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, isa_bus, 0x0, 0x2, 0x0);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, isa_bus, 0x1, 0x2, 0x1);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, isa_bus, 0x0, 0x2, 0x2);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, isa_bus, 0x3, 0x2, 0x3);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, isa_bus, 0x4, 0x2, 0x4);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, isa_bus, 0x8, 0x2, 0x8);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, isa_bus, 0x9, 0x2, 0x9);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, isa_bus, 0xa, 0x2, 0xa);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, isa_bus, 0xb, 0x2, 0xb);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, isa_bus, 0xc, 0x2, 0xc);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, isa_bus, 0xd, 0x2, 0xd);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, isa_bus, 0xe, 0x2, 0xe);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, isa_bus, 0xf, 0x2, 0xf);
+
+ /* Builtin devices on Bus 0 */
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x8, 0x2, 0x10);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x7d, 0x2, 0x13);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x74, 0x2, 0x17);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x75, 0x2, 0x13);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x76, 0x2, 0x12);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x77, 0x2, 0x10);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x6c, 0x2, 0x10);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x70, 0x2, 0x10);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x71, 0x2, 0x11);
+
+ /* Firewire 4:0.0 */
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x4, 0x0, 0x2, 0x10);
+
+ /* Old riser card */
+ // riser slot top 5:8.0
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, 0x20, 0x2, 0x14);
+ // riser slot middle 5:9.0
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, 0x24, 0x2, 0x15);
+ // riser slot bottom 5:a.0
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, 0x28, 0x2, 0x16);
+
+ /* New Riser Card */
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, 0x30, 0x2, 0x14);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, 0x34, 0x2, 0x15);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, 0x38, 0x2, 0x16);
+
+ /* Onboard Ethernet */
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x1, 0x0, 0x2, 0x10);
+
+ /* Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */
+ smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, isa_bus, 0x0, MP_APIC_ALL, 0x0);
+ smp_write_intsrc(mc, mp_NMI, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, isa_bus, 0x0, MP_APIC_ALL, 0x1);
+
+ /* Compute the checksums */
+ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length);
+ mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length);
+
+ printk_debug("Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc));
+
+ return smp_next_mpe_entry(mc);
+}
+
+unsigned long write_smp_table(unsigned long addr)
+{
+ void *v;
+ v = smp_write_floating_table(addr);
+ return (unsigned long)smp_write_config_table(v);
+}
--- /dev/null
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2008 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+
+static void power_down_reset_check(void)
+{
+ uint8_t cmos;
+
+ cmos=cmos_read(RTC_BOOT_BYTE)>>4 ;
+ printk_debug("Boot byte = %x\r\n", cmos);
+
+ if((cmos>2)&&(cmos&1)) full_reset();
+}
--- /dev/null
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2008 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <arch/io.h>
+
+void soft_reset(void)
+{
+ outb(0x04, 0xcf9);
+}
+
+void hard_reset(void)
+{
+ outb(0x02, 0xcf9);
+ outb(0x06, 0xcf9);
+}
--- /dev/null
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/* This code should work for all ICH* southbridges with a NIC. */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+
+static void nic_init(struct device *dev)
+{
+ printk_debug("Initializing RTL8168 Gigabit Ethernet\n");
+ // Nothing to do yet, but this has to be here to keep
+ // coreboot from trying to execute an option ROM.
+}
+
+static struct device_operations nic_ops = {
+ .read_resources = pci_dev_read_resources,
+ .set_resources = pci_dev_set_resources,
+ .enable_resources = pci_dev_enable_resources,
+ .init = nic_init,
+ .scan_bus = 0,
+};
+
+static const struct pci_driver rtl8169_nic __pci_driver = {
+ .ops = &nic_ops,
+ .vendor = 0x10ec,
+ .device = 0x8168,
+};
+
+
--- /dev/null
+config chip.h
+object superio.o
--- /dev/null
+struct chip_operations;
+extern struct chip_operations superio_smsc_lpc47m15x_ops;
+
+#include <pc80/keyboard.h>
+#include <uart8250.h>
+
+struct superio_smsc_lpc47m15x_config {
+ struct uart8250 com1, com2;
+ struct pc_keyboard keyboard;
+};
--- /dev/null
+#define LPC47M15X_FDC 0 /* Floppy */
+#define LPC47M15X_PP 3 /* Parallel Port */
+#define LPC47M15X_SP1 4 /* Com1 */
+#define LPC47M15X_SP2 5 /* Com2 */
+#define LPC47M15X_KBC 7 /* Keyboard & Mouse */
+#define LPC47M15X_GAME 9 /* GAME */
+#define LPC47M15X_PME 10 /* PME reg*/
+#define LPC47M15X_MPU 11 /* MPE -- who knows -- reg*/
+
+#define LPC47M15X2_MAX_CONFIG_REGISTER 0x5F
--- /dev/null
+/*
+ * lpc47m15x_early_serial.c: Pre-RAM driver for SMSC LPC47M15X Super I/O chip
+ *
+ * Copyright (C) 2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <arch/romcc_io.h>
+#include "lpc47m15x.h"
+
+static inline void pnp_enter_conf_state(device_t dev)
+{
+ unsigned port = dev>>8;
+ outb(0x55, port);
+}
+
+static void pnp_exit_conf_state(device_t dev) {
+ unsigned port = dev>>8;
+ outb(0xaa, port);
+}
+
+static void lpc47b272_enable_serial(device_t dev, unsigned iobase)
+{
+ pnp_enter_conf_state(dev);
+ pnp_set_logical_device(dev);
+ pnp_set_enable(dev, 0);
+ pnp_set_iobase(dev, PNP_IDX_IO0, iobase);
+ pnp_set_enable(dev, 1);
+ pnp_exit_conf_state(dev);
+}
--- /dev/null
+/*
+ * superio.c: RAM driver for SMSC LPC47M15X Super I/O chip
+ *
+ * (C) 2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <arch/io.h>
+#include <device/device.h>
+#include <device/pnp.h>
+#include <console/console.h>
+#include <device/smbus.h>
+#include <string.h>
+#include <bitops.h>
+#include <uart8250.h>
+#include <pc80/keyboard.h>
+#include <stdlib.h>
+#include "chip.h"
+#include "lpc47m15x.h"
+
+// Forward declarations
+static void enable_dev(device_t dev);
+void lpc47m15x_pnp_set_resources(device_t dev);
+void lpc47m15x_pnp_set_resources(device_t dev);
+void lpc47m15x_pnp_enable_resources(device_t dev);
+void lpc47m15x_pnp_enable(device_t dev);
+static void lpc47m15x_init(device_t dev);
+
+static void pnp_enter_conf_state(device_t dev);
+static void pnp_exit_conf_state(device_t dev);
+static void dump_pnp_device(device_t dev);
+
+
+struct chip_operations superio_smsc_lpc47m15x_ops = {
+ CHIP_NAME("SMSC LPC47M15x/192/997 Super I/O")
+ .enable_dev = enable_dev
+};
+
+static struct device_operations ops = {
+ .read_resources = pnp_read_resources,
+ .set_resources = lpc47m15x_pnp_set_resources,
+ .enable_resources = lpc47m15x_pnp_enable_resources,
+ .enable = lpc47m15x_pnp_enable,
+ .init = lpc47m15x_init,
+};
+
+static struct pnp_info pnp_dev_info[] = {
+ { &ops, LPC47M15X_FDC, PNP_IO0 | PNP_IRQ0 | PNP_DRQ0, { 0x07f8, 0}, },
+ { &ops, LPC47M15X_PP, PNP_IO0 | PNP_IRQ0 | PNP_DRQ0, { 0x07f8, 0}, },
+ { &ops, LPC47M15X_SP1, PNP_IO0 | PNP_IRQ0, { 0x7f8, 0 }, },
+ { &ops, LPC47M15X_SP2, PNP_IO0 | PNP_IRQ0, { 0x7f8, 0 }, },
+ { &ops, LPC47M15X_KBC, PNP_IO0 | PNP_IO1 | PNP_IRQ0 | PNP_IRQ1, { 0x7ff, 0 }, { 0x7ff, 0x4}, },
+};
+
+static void enable_dev(device_t dev)
+{
+ pnp_enable_devices(dev, &pnp_ops, ARRAY_SIZE(pnp_dev_info), pnp_dev_info);
+}
+
+void lpc47m15x_pnp_set_resources(device_t dev)
+{
+ pnp_enter_conf_state(dev);
+ pnp_set_resources(dev);
+ pnp_exit_conf_state(dev);
+}
+
+void lpc47m15x_pnp_enable_resources(device_t dev)
+{
+ pnp_enter_conf_state(dev);
+ pnp_enable_resources(dev);
+ pnp_exit_conf_state(dev);
+}
+
+void lpc47m15x_pnp_enable(device_t dev)
+{
+ pnp_enter_conf_state(dev);
+ pnp_set_logical_device(dev);
+
+ if(dev->enabled) {
+ pnp_set_enable(dev, 1);
+ }
+ else {
+ pnp_set_enable(dev, 0);
+ }
+ pnp_exit_conf_state(dev);
+}
+
+static void lpc47m15x_init(device_t dev)
+{
+ struct superio_smsc_lpc47m15x_config *conf = dev->chip_info;
+ struct resource *res0, *res1;
+
+ if (!dev->enabled)
+ return;
+
+ switch(dev->path.pnp.device) {
+ case LPC47M15X_SP1:
+ res0 = find_resource(dev, PNP_IDX_IO0);
+ init_uart8250(res0->base, &conf->com1);
+ break;
+
+ case LPC47M15X_SP2:
+ res0 = find_resource(dev, PNP_IDX_IO0);
+ init_uart8250(res0->base, &conf->com2);
+ break;
+
+ case LPC47M15X_KBC:
+ res0 = find_resource(dev, PNP_IDX_IO0);
+ res1 = find_resource(dev, PNP_IDX_IO1);
+ pc_keyboard_init(&conf->keyboard);
+ break;
+ }
+}
+
+static void pnp_enter_conf_state(device_t dev)
+{
+ outb(0x55, dev->path.pnp.port);
+}
+
+static void pnp_exit_conf_state(device_t dev)
+{
+ outb(0xaa, dev->path.pnp.port);
+}
+
--- /dev/null
+# This will make a target directory of ./VENDOR_MAINBOARD
+
+target VENDOR_MAINBOARD
+mainboard VENDOR/MAINBOARD
+
+option CC="CROSSCC"
+option CONFIG_CROSS_COMPILE="CROSS_PREFIX"
+option HOSTCC="CROSS_HOSTCC"
+
+__COMPRESSION__
+__LOGLEVEL__
+
+option CONFIG_ROM_SIZE=512*1024
+
+romimage "normal"
+ option CONFIG_USE_FALLBACK_IMAGE=0
+ option COREBOOT_EXTRA_VERSION=".0-normal"
+ payload __PAYLOAD__
+end
+
+romimage "fallback"
+ option CONFIG_USE_FALLBACK_IMAGE=1
+ option COREBOOT_EXTRA_VERSION=".0-fallback"
+ payload __PAYLOAD__
+end
+
+buildrom ./coreboot.rom CONFIG_ROM_SIZE "normal" "fallback"
+pci_rom ../../../misc/d945gclf-pci8086,2772.rom vendor_id=0x8086 device_id=0x2772
+
projects / coreboot.git / commitdiff