bool "Artec Group"
config VENDOR_ASI
bool "ASI"
+config VENDOR_ASROCK
+ bool "ASROCK"
config VENDOR_ASUS
bool "ASUS"
config VENDOR_A_TREND
default "ASI"
depends on VENDOR_ASI
+config MAINBOARD_VENDOR
+ string
+ default "ASROCK"
+ depends on VENDOR_ASROCK
+
config MAINBOARD_VENDOR
string
default "ASUS"
source "src/mainboard/arima/Kconfig"
source "src/mainboard/artecgroup/Kconfig"
source "src/mainboard/asi/Kconfig"
+source "src/mainboard/asrock/Kconfig"
source "src/mainboard/asus/Kconfig"
source "src/mainboard/axus/Kconfig"
source "src/mainboard/azza/Kconfig"
--- /dev/null
+config BOARD_ASROCK_939A785GMH
+ bool "939A785GMH/128M"
+ select ARCH_X86
+ select CPU_AMD_SOCKET_939
+ select K8_HT_FREQ_1G_SUPPORT
+ select NORTHBRIDGE_AMD_AMDK8
+ select NORTHBRIDGE_AMD_AMDK8_ROOT_COMPLEX
+ select SOUTHBRIDGE_AMD_RS780
+ select SOUTHBRIDGE_AMD_SB700
+ select SUPERIO_WINBOND_W83627DHG
+ select BOARD_HAS_FADT
+ select GENERATE_ACPI_TABLES
+ select GENERATE_MP_TABLE
+ select GENERATE_PIRQ_TABLE
+ select HAVE_MAINBOARD_RESOURCES
+ select HAVE_BUS_CONFIG
+ select LIFT_BSP_APIC_ID
+ select USE_PRINTK_IN_CAR
+ select USE_DCACHE_RAM
+ select HAVE_HARD_RESET
+ select SB_HT_CHAIN_UNITID_OFFSET_ONLY
+ select BOARD_ROMSIZE_KB_1024
+ select GFXUMA
+
+config MAINBOARD_DIR
+ string
+ default asrock/939a785gmh
+ depends on BOARD_ASROCK_939A785GMH
+
+config HAVE_HIGH_TABLES
+ bool
+ default n
+ depends on BOARD_ASROCK_939A785GMH
+
+config DCACHE_RAM_BASE
+ hex
+ default 0xc8000
+ depends on BOARD_ASROCK_939A785GMH
+
+config DCACHE_RAM_SIZE
+ hex
+ default 0x08000
+ depends on BOARD_ASROCK_939A785GMH
+
+config DCACHE_RAM_GLOBAL_VAR_SIZE
+ hex
+ default 0x01000
+ depends on BOARD_ASROCK_939A785GMH
+
+config APIC_ID_OFFSET
+ hex
+ default 0x0
+ depends on BOARD_ASROCK_939A785GMH
+
+config LB_CKS_RANGE_END
+ int
+ default 122
+ depends on BOARD_ASROCK_939A785GMH
+
+config LB_CKS_LOC
+ int
+ default 123
+ depends on BOARD_ASROCK_939A785GMH
+
+config MAINBOARD_PART_NUMBER
+ string
+ default "939A785GMH"
+ depends on BOARD_ASROCK_939A785GMH
+
+config HW_MEM_HOLE_SIZEK
+ hex
+ default 0x100000
+ depends on BOARD_ASROCK_939A785GMH
+
+config MAX_CPUS
+ int
+ default 8
+ depends on BOARD_ASROCK_939A785GMH
+
+config MAX_PHYSICAL_CPUS
+ int
+ default 2
+ depends on BOARD_ASROCK_939A785GMH
+
+config HW_MEM_HOLE_SIZE_AUTO_INC
+ bool
+ default n
+ depends on BOARD_ASROCK_939A785GMH
+
+config SB_HT_CHAIN_ON_BUS0
+ int
+ default 1
+ depends on BOARD_ASROCK_939A785GMH
+
+config HT_CHAIN_END_UNITID_BASE
+ hex
+ default 0x1
+ depends on BOARD_ASROCK_939A785GMH
+
+config HT_CHAIN_UNITID_BASE
+ hex
+ default 0x0
+ depends on BOARD_ASROCK_939A785GMH
+
+config USE_INIT
+ bool
+ default n
+ depends on BOARD_ASROCK_939A785GMH
+
+config IRQ_SLOT_COUNT
+ int
+ default 11
+ depends on BOARD_ASROCK_939A785GMH
+
+config MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
+ hex
+ default 0x1022
+ depends on BOARD_ASROCK_939A785GMH
+
+config MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
+ hex
+ default 0x3060
+ depends on BOARD_ASROCK_939A785GMH
--- /dev/null
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/*
+ DefinitionBlock (
+ "DSDT.AML",
+ "DSDT",
+ 0x01,
+ "XXXXXX",
+ "XXXXXXXX",
+ 0x00010001
+ )
+ {
+ #include "debug.asl"
+ }
+*/
+
+/*
+* 0x80: POST_BASE
+* 0x3F8: DEBCOM_BASE
+* X80: POST_REGION
+* P80: PORT80
+*
+* CREG: DEBCOM_REGION
+* CUAR: DEBCOM_UART
+* CDAT: DEBCOM_DATA
+* CDLM: DEBCOM_DLM
+* DLCR: DEBCOM_LCR
+* CMCR: DEBCOM_MCR
+* CLSR: DEBCOM_LSR
+*
+* DEBUG_INIT DINI
+*/
+
+OperationRegion(X80, SystemIO, 0x80, 1)
+ Field(X80, ByteAcc, NoLock, Preserve)
+{
+ P80, 8
+}
+
+OperationRegion(CREG, SystemIO, 0x3F8, 8)
+ Field(CREG, ByteAcc, NoLock, Preserve)
+{
+ CDAT, 8,
+ CDLM, 8,, 8, DLCR, 8, CMCR, 8, CLSR, 8
+}
+
+/*
+* DINI
+* Initialize the COM port to 115,200 8-N-1
+*/
+Method(DINI)
+{
+ store(0x83, DLCR)
+ store(0x01, CDAT) /* 115200 baud (low) */
+ store(0x00, CDLM) /* 115200 baud (high) */
+ store(0x03, DLCR) /* word=8 stop=1 parity=none */
+ store(0x03, CMCR) /* DTR=1 RTS=1 Out2=Off Loop=Off */
+ store(0x00, CDLM) /* turn off interrupts */
+}
+
+/*
+* THRE
+* Wait for COM port transmitter holding register to go empty
+*/
+Method(THRE)
+{
+ and(CLSR, 0x20, local0)
+ while (Lequal(local0, Zero)) {
+ and(CLSR, 0x20, local0)
+ }
+}
+
+/*
+* OUTX
+* Send a single raw character
+*/
+Method(OUTX, 1)
+{
+ THRE()
+ store(Arg0, CDAT)
+}
+
+/*
+* OUTC
+* Send a single character, expanding LF into CR/LF
+*/
+Method(OUTC, 1)
+{
+ if (LEqual(Arg0, 0x0a)) {
+ OUTX(0x0d)
+ }
+ OUTX(Arg0)
+}
+
+/*
+* DBGN
+* Send a single hex nibble
+*/
+Method(DBGN, 1)
+{
+ and(Arg0, 0x0f, Local0)
+ if (LLess(Local0, 10)) {
+ add(Local0, 0x30, Local0)
+ } else {
+ add(Local0, 0x37, Local0)
+ }
+ OUTC(Local0)
+}
+
+/*
+* DBGB
+* Send a hex byte
+*/
+Method(DBGB, 1)
+{
+ ShiftRight(Arg0, 4, Local0)
+ DBGN(Local0)
+ DBGN(Arg0)
+}
+
+/*
+* DBGW
+* Send a hex word
+*/
+Method(DBGW, 1)
+{
+ ShiftRight(Arg0, 8, Local0)
+ DBGB(Local0)
+ DBGB(Arg0)
+}
+
+/*
+* DBGD
+* Send a hex Dword
+*/
+Method(DBGD, 1)
+{
+ ShiftRight(Arg0, 16, Local0)
+ DBGW(Local0)
+ DBGW(Arg0)
+}
+
+/*
+* DBGO
+* Send either a string or an integer
+*/
+Method(DBGO, 1)
+{
+ /* DINI() */
+ if (LEqual(ObjectType(Arg0), 1)) {
+ if (LGreater(Arg0, 0xffff)) {
+ DBGD(Arg0)
+ } else {
+ if (LGreater(Arg0, 0xff)) {
+ DBGW(Arg0)
+ } else {
+ DBGB(Arg0)
+ }
+ }
+ } else {
+ Name(BDBG, Buffer(80) {})
+ store(Arg0, BDBG)
+ store(0, Local1)
+ while (One) {
+ store(GETC(BDBG, Local1), Local0)
+ if (LEqual(Local0, 0)) {
+ return (0)
+ }
+ OUTC(Local0)
+ Increment(Local1)
+ }
+ }
+ return (0)
+}
+
+/* Get a char from a string */
+Method(GETC, 2)
+{
+ CreateByteField(Arg0, Arg1, DBGC)
+ return (DBGC)
+}
--- /dev/null
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/*
+Scope(\_SB) {
+ #include "globutil.asl"
+}
+*/
+
+/* string compare functions */
+Method(MIN, 2)
+{
+ if (LLess(Arg0, Arg1)) {
+ Return(Arg0)
+ } else {
+ Return(Arg1)
+ }
+}
+
+Method(SLEN, 1)
+{
+ Store(Arg0, Local0)
+ Return(Sizeof(Local0))
+}
+
+Method(S2BF, 1)
+{
+ Add(SLEN(Arg0), One, Local0)
+ Name(BUFF, Buffer(Local0) {})
+ Store(Arg0, BUFF)
+ Return(BUFF)
+}
+
+/* Strong string compare. Checks both length and content */
+Method(SCMP, 2)
+{
+ Store(S2BF(Arg0), Local0)
+ Store(S2BF(Arg1), Local1)
+ Store(Zero, Local4)
+ Store(SLEN(Arg0), Local5)
+ Store(SLEN(Arg1), Local6)
+ Store(MIN(Local5, Local6), Local7)
+
+ While(LLess(Local4, Local7)) {
+ Store(Derefof(Index(Local0, Local4)), Local2)
+ Store(Derefof(Index(Local1, Local4)), Local3)
+ if (LGreater(Local2, Local3)) {
+ Return(One)
+ } else {
+ if (LLess(Local2, Local3)) {
+ Return(Ones)
+ }
+ }
+ Increment(Local4)
+ }
+ if (LLess(Local4, Local5)) {
+ Return(One)
+ } else {
+ if (LLess(Local4, Local6)) {
+ Return(Ones)
+ } else {
+ Return(Zero)
+ }
+ }
+}
+
+/* Weak string compare. Checks to find Arg1 at beginning of Arg0.
+* Fails if length(Arg0) < length(Arg1). Returns 0 on Fail, 1 on
+* Pass.
+*/
+Method(WCMP, 2)
+{
+ Store(S2BF(Arg0), Local0)
+ Store(S2BF(Arg1), Local1)
+ if (LLess(SLEN(Arg0), SLEN(Arg1))) {
+ Return(0)
+ }
+ Store(Zero, Local2)
+ Store(SLEN(Arg1), Local3)
+
+ While(LLess(Local2, Local3)) {
+ if (LNotEqual(Derefof(Index(Local0, Local2)),
+ Derefof(Index(Local1, Local2)))) {
+ Return(0)
+ }
+ Increment(Local2)
+ }
+ Return(One)
+}
+
+/* ARG0 = IRQ Number(0-15)
+* Returns Bit Map
+*/
+Method(I2BM, 1)
+{
+ Store(0, Local0)
+ if (LNotEqual(ARG0, 0)) {
+ Store(1, Local1)
+ ShiftLeft(Local1, ARG0, Local0)
+ }
+ Return(Local0)
+}
--- /dev/null
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/*
+Scope (_SB) {
+ Device(PCI0) {
+ Device(IDEC) {
+ Name(_ADR, 0x00140001)
+ #include "ide.asl"
+ }
+ }
+}
+*/
+
+/* Some timing tables */
+Name(UDTT, Package(){ /* Udma timing table */
+ 120, 90, 60, 45, 30, 20, 15, 0 /* UDMA modes 0 -> 6 */
+})
+
+Name(MDTT, Package(){ /* MWDma timing table */
+ 480, 150, 120, 0 /* Legacy DMA modes 0 -> 2 */
+})
+
+Name(POTT, Package(){ /* Pio timing table */
+ 600, 390, 270, 180, 120, 0 /* PIO modes 0 -> 4 */
+})
+
+/* Some timing register value tables */
+Name(MDRT, Package(){ /* MWDma timing register table */
+ 0x77, 0x21, 0x20, 0xFF /* Legacy DMA modes 0 -> 2 */
+})
+
+Name(PORT, Package(){
+ 0x99, 0x47, 0x34, 0x22, 0x20, 0x99 /* PIO modes 0 -> 4 */
+})
+
+OperationRegion(ICRG, PCI_Config, 0x40, 0x20) /* ide control registers */
+ Field(ICRG, AnyAcc, NoLock, Preserve)
+{
+ PPTS, 8, /* Primary PIO Slave Timing */
+ PPTM, 8, /* Primary PIO Master Timing */
+ OFFSET(0x04), PMTS, 8, /* Primary MWDMA Slave Timing */
+ PMTM, 8, /* Primary MWDMA Master Timing */
+ OFFSET(0x08), PPCR, 8, /* Primary PIO Control */
+ OFFSET(0x0A), PPMM, 4, /* Primary PIO master Mode */
+ PPSM, 4, /* Primary PIO slave Mode */
+ OFFSET(0x14), PDCR, 2, /* Primary UDMA Control */
+ OFFSET(0x16), PDMM, 4, /* Primary UltraDMA Mode */
+ PDSM, 4, /* Primary UltraDMA Mode */
+}
+
+Method(GTTM, 1) /* get total time*/
+{
+ Store(And(Arg0, 0x0F), Local0) /* Recovery Width */
+ Increment(Local0)
+ Store(ShiftRight(Arg0, 4), Local1) /* Command Width */
+ Increment(Local1)
+ Return(Multiply(30, Add(Local0, Local1)))
+}
+
+Device(PRID)
+{
+ Name (_ADR, Zero)
+ Method(_GTM, 0)
+ {
+ NAME(OTBF, Buffer(20) { /* out buffer */
+ 0xFF, 0xFF, 0xFF, 0xFF,
+ 0xFF, 0xFF, 0xFF, 0xFF,
+ 0xFF, 0xFF, 0xFF, 0xFF,
+ 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00
+ })
+
+ CreateDwordField(OTBF, 0, PSD0) /* PIO spd0 */
+ CreateDwordField(OTBF, 4, DSD0) /* DMA spd0 */
+ CreateDwordField(OTBF, 8, PSD1) /* PIO spd1 */
+ CreateDwordField(OTBF, 12, DSD1) /* DMA spd1 */
+ CreateDwordField(OTBF, 16, BFFG) /* buffer flags */
+
+ /* Just return if the channel is disabled */
+ If(And(PPCR, 0x01)) { /* primary PIO control */
+ Return(OTBF)
+ }
+
+ /* Always tell them independent timing available and IOChannelReady used on both drives */
+ Or(BFFG, 0x1A, BFFG)
+
+ Store(GTTM(PPTM), PSD0) /* save total time of primary PIO master timming to PIO spd0 */
+ Store(GTTM(PPTS), PSD1) /* save total time of primary PIO slave Timing to PIO spd1 */
+
+ If(And(PDCR, 0x01)) { /* It's under UDMA mode */
+ Or(BFFG, 0x01, BFFG)
+ Store(DerefOf(Index(UDTT, PDMM)), DSD0)
+ }
+ Else {
+ Store(GTTM(PMTM), DSD0) /* Primary MWDMA Master Timing, DmaSpd0 */
+ }
+
+ If(And(PDCR, 0x02)) { /* It's under UDMA mode */
+ Or(BFFG, 0x04, BFFG)
+ Store(DerefOf(Index(UDTT, PDSM)), DSD1)
+ }
+ Else {
+ Store(GTTM(PMTS), DSD1) /* Primary MWDMA Slave Timing, DmaSpd0 */
+ }
+
+ Return(OTBF) /* out buffer */
+ } /* End Method(_GTM) */
+
+ Method(_STM, 3, NotSerialized)
+ {
+ NAME(INBF, Buffer(20) { /* in buffer */
+ 0xFF, 0xFF, 0xFF, 0xFF,
+ 0xFF, 0xFF, 0xFF, 0xFF,
+ 0xFF, 0xFF, 0xFF, 0xFF,
+ 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00
+ })
+
+ CreateDwordField(INBF, 0, PSD0) /* PIO spd0 */
+ CreateDwordField(INBF, 4, DSD0) /* PIO spd0 */
+ CreateDwordField(INBF, 8, PSD1) /* PIO spd1 */
+ CreateDwordField(INBF, 12, DSD1) /* DMA spd1 */
+ CreateDwordField(INBF, 16, BFFG) /*buffer flag */
+
+ Store(Match(POTT, MLE, PSD0, MTR, 0, 0), Local0)
+ Divide(Local0, 5, PPMM,) /* Primary PIO master Mode */
+ Store(Match(POTT, MLE, PSD1, MTR, 0, 0), Local1)
+ Divide(Local1, 5, PPSM,) /* Primary PIO slave Mode */
+
+ Store(DerefOf(Index(PORT, Local0)), PPTM) /* Primary PIO Master Timing */
+ Store(DerefOf(Index(PORT, Local1)), PPTS) /* Primary PIO Slave Timing */
+
+ If(And(BFFG, 0x01)) { /* Drive 0 is under UDMA mode */
+ Store(Match(UDTT, MLE, DSD0, MTR, 0, 0), Local0)
+ Divide(Local0, 7, PDMM,)
+ Or(PDCR, 0x01, PDCR)
+ }
+ Else {
+ If(LNotEqual(DSD0, 0xFFFFFFFF)) {
+ Store(Match(MDTT, MLE, DSD0, MTR, 0, 0), Local0)
+ Store(DerefOf(Index(MDRT, Local0)), PMTM)
+ }
+ }
+
+ If(And(BFFG, 0x04)) { /* Drive 1 is under UDMA mode */
+ Store(Match(UDTT, MLE, DSD1, MTR, 0, 0), Local0)
+ Divide(Local0, 7, PDSM,)
+ Or(PDCR, 0x02, PDCR)
+ }
+ Else {
+ If(LNotEqual(DSD1, 0xFFFFFFFF)) {
+ Store(Match(MDTT, MLE, DSD1, MTR, 0, 0), Local0)
+ Store(DerefOf(Index(MDRT, Local0)), PMTS)
+ }
+ }
+ /* Return(INBF) */
+ } /*End Method(_STM) */
+ Device(MST)
+ {
+ Name(_ADR, 0)
+ Method(_GTF) {
+ Name(CMBF, Buffer(21) {
+ 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF,
+ 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5
+ })
+ CreateByteField(CMBF, 1, POMD)
+ CreateByteField(CMBF, 8, DMMD)
+ CreateByteField(CMBF, 5, CMDA)
+ CreateByteField(CMBF, 12, CMDB)
+ CreateByteField(CMBF, 19, CMDC)
+
+ Store(0xA0, CMDA)
+ Store(0xA0, CMDB)
+ Store(0xA0, CMDC)
+
+ Or(PPMM, 0x08, POMD)
+
+ If(And(PDCR, 0x01)) {
+ Or(PDMM, 0x40, DMMD)
+ }
+ Else {
+ Store(Match
+ (MDTT, MLE, GTTM(PMTM),
+ MTR, 0, 0), Local0)
+ If(LLess(Local0, 3)) {
+ Or(0x20, Local0, DMMD)
+ }
+ }
+ Return(CMBF)
+ }
+ } /* End Device(MST) */
+
+ Device(SLAV)
+ {
+ Name(_ADR, 1)
+ Method(_GTF) {
+ Name(CMBF, Buffer(21) {
+ 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF,
+ 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5
+ })
+ CreateByteField(CMBF, 1, POMD)
+ CreateByteField(CMBF, 8, DMMD)
+ CreateByteField(CMBF, 5, CMDA)
+ CreateByteField(CMBF, 12, CMDB)
+ CreateByteField(CMBF, 19, CMDC)
+
+ Store(0xB0, CMDA)
+ Store(0xB0, CMDB)
+ Store(0xB0, CMDC)
+
+ Or(PPSM, 0x08, POMD)
+
+ If(And(PDCR, 0x02)) {
+ Or(PDSM, 0x40, DMMD)
+ }
+ Else {
+ Store(Match
+ (MDTT, MLE, GTTM(PMTS),
+ MTR, 0, 0), Local0)
+ If(LLess(Local0, 3)) {
+ Or(0x20, Local0, DMMD)
+ }
+ }
+ Return(CMBF)
+ }
+ } /* End Device(SLAV) */
+}
--- /dev/null
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/*
+DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001
+ )
+ {
+ #include "routing.asl"
+ }
+*/
+
+/* Routing is in System Bus scope */
+Scope(\_SB) {
+ Name(PR0, Package(){
+ /* NB devices */
+ /* Bus 0, Dev 0 - RS780 Host Controller */
+ /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */
+ /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */
+ Package(){0x0002FFFF, 0, INTC, 0 },
+ Package(){0x0002FFFF, 1, INTD, 0 },
+ Package(){0x0002FFFF, 2, INTA, 0 },
+ Package(){0x0002FFFF, 3, INTB, 0 },
+ /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */
+ /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */
+ Package(){0x0004FFFF, 0, INTA, 0 },
+ Package(){0x0004FFFF, 1, INTB, 0 },
+ Package(){0x0004FFFF, 2, INTC, 0 },
+ Package(){0x0004FFFF, 3, INTD, 0 },
+ /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */
+ /* Package(){0x0005FFFF, 0, INTB, 0 }, */
+ /* Package(){0x0005FFFF, 1, INTC, 0 }, */
+ /* Package(){0x0005FFFF, 2, INTD, 0 }, */
+ /* Package(){0x0005FFFF, 3, INTA, 0 }, */
+ /* Bus 0, Dev 6 - PCIe Bridge for Ethernet Chip */
+ Package(){0x0006FFFF, 0, INTC, 0 },
+ Package(){0x0006FFFF, 1, INTD, 0 },
+ Package(){0x0006FFFF, 2, INTA, 0 },
+ Package(){0x0006FFFF, 3, INTB, 0 },
+ /* Bus 0, Dev 7 - PCIe Bridge for x1 PCIe Slot */
+ Package(){0x0007FFFF, 0, INTD, 0 },
+ Package(){0x0007FFFF, 1, INTA, 0 },
+ Package(){0x0007FFFF, 2, INTB, 0 },
+ Package(){0x0007FFFF, 3, INTC, 0 },
+ /* Bus 0, Funct 8 - Southbridge port (normally hidden) */
+
+ /* SB devices */
+ /* Bus 0, Dev 17 - SATA controller #2 */
+ /* Bus 0, Dev 18 - SATA controller #1 */
+ Package(){0x0011FFFF, 0, INTA, 0 },
+
+ /* Bus 0, Dev 19 - USB: OHCI, dev 18,19 func 0-2, dev 20 func 5;
+ * EHCI, dev 18, 19 func 2 */
+ Package(){0x0012FFFF, 0, INTA, 0 },
+ Package(){0x0012FFFF, 1, INTB, 0 },
+ Package(){0x0012FFFF, 2, INTC, 0 },
+
+ Package(){0x0013FFFF, 0, INTC, 0 },
+ Package(){0x0013FFFF, 1, INTD, 0 },
+ Package(){0x0013FFFF, 2, INTA, 0 },
+
+ /* Package(){0x0014FFFF, 1, INTA, 0 }, */
+
+ /* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:USB */
+ Package(){0x0014FFFF, 0, INTA, 0 },
+ Package(){0x0014FFFF, 1, INTB, 0 },
+ Package(){0x0014FFFF, 2, INTC, 0 },
+ Package(){0x0014FFFF, 3, INTD, 0 },
+ })
+
+ Name(APR0, Package(){
+ /* NB devices in APIC mode */
+ /* Bus 0, Dev 0 - RS780 Host Controller */
+
+ /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */
+ /* Package(){0x0001FFFF, 0, 0, 18 }, */
+ /* package(){0x0001FFFF, 1, 0, 19 }, */
+
+ /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */
+ Package(){0x0002FFFF, 0, 0, 18 },
+ /* Package(){0x0002FFFF, 1, 0, 19 }, */
+ /* Package(){0x0002FFFF, 2, 0, 16 }, */
+ /* Package(){0x0002FFFF, 3, 0, 17 }, */
+
+ /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */
+ Package(){0x0003FFFF, 0, 0, 19 },
+
+ /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */
+ Package(){0x0004FFFF, 0, 0, 16 },
+ /* Package(){0x0004FFFF, 1, 0, 17 }, */
+ /* Package(){0x0004FFFF, 2, 0, 18 }, */
+ /* Package(){0x0004FFFF, 3, 0, 19 }, */
+
+ /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */
+ /* Package(){0x0005FFFF, 0, 0, 17 }, */
+ /* Package(){0x0005FFFF, 1, 0, 18 }, */
+ /* Package(){0x0005FFFF, 2, 0, 19 }, */
+ /* Package(){0x0005FFFF, 3, 0, 16 }, */
+
+ /* Bus 0, Dev 6 - General purpose PCIe bridge 6 */
+ /* Package(){0x0006FFFF, 0, 0, 18 }, */
+ /* Package(){0x0006FFFF, 1, 0, 19 }, */
+ /* Package(){0x0006FFFF, 2, 0, 16 }, */
+ /* Package(){0x0006FFFF, 3, 0, 17 }, */
+
+ /* Bus 0, Dev 7 - PCIe Bridge for network card */
+ /* Package(){0x0007FFFF, 0, 0, 19 }, */
+ /* Package(){0x0007FFFF, 1, 0, 16 }, */
+ /* Package(){0x0007FFFF, 2, 0, 17 }, */
+ /* Package(){0x0007FFFF, 3, 0, 18 }, */
+
+ /* Bus 0, Dev 9 - PCIe Bridge for network card */
+ Package(){0x0009FFFF, 0, 0, 17 },
+ /* Package(){0x0009FFFF, 1, 0, 16 }, */
+ /* Package(){0x0009FFFF, 2, 0, 17 }, */
+ /* Package(){0x0009FFFF, 3, 0, 18 }, */
+ /* Bus 0, Dev A - PCIe Bridge for network card */
+ Package(){0x000AFFFF, 0, 0, 18 },
+ /* Package(){0x000AFFFF, 1, 0, 16 }, */
+ /* Package(){0x000AFFFF, 2, 0, 17 }, */
+ /* Package(){0x000AFFFF, 3, 0, 18 }, */
+ /* Bus 0, Funct 8 - Southbridge port (normally hidden) */
+
+ /* SB devices in APIC mode */
+ /* Bus 0, Dev 17 - SATA controller #2 */
+ /* Bus 0, Dev 18 - SATA controller #1 */
+ Package(){0x0011FFFF, 0, 0, 22 },
+
+ /* Bus 0, Dev 19 - USB: OHCI, dev 18,19 func 0-2, dev 20 func 5;
+ * EHCI, dev 18, 19 func 2 */
+ Package(){0x0012FFFF, 0, 0, 16 },
+ Package(){0x0012FFFF, 1, 0, 17 },
+ Package(){0x0012FFFF, 2, 0, 18 },
+
+ Package(){0x0013FFFF, 0, 0, 18 },
+ Package(){0x0013FFFF, 1, 0, 19 },
+ Package(){0x0013FFFF, 2, 0, 16 },
+
+ /* Package(){0x00140000, 0, 0, 16 }, */
+
+ /* Package(){0x00130004, 2, 0, 18 }, */
+ /* Package(){0x00130005, 3, 0, 19 }, */
+
+ /* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:USB */
+ Package(){0x0014FFFF, 0, 0, 16 },
+ Package(){0x0014FFFF, 1, 0, 17 },
+ Package(){0x0014FFFF, 2, 0, 18 },
+ Package(){0x0014FFFF, 3, 0, 19 },
+ /* Package(){0x00140004, 2, 0, 18 }, */
+ /* Package(){0x00140004, 3, 0, 19 }, */
+ /* Package(){0x00140005, 1, 0, 17 }, */
+ /* Package(){0x00140006, 1, 0, 17 }, */
+ })
+
+ Name(PR1, Package(){
+ /* Internal graphics - RS780 VGA, Bus1, Dev5 */
+ Package(){0x0005FFFF, 0, INTA, 0 },
+ Package(){0x0005FFFF, 1, INTB, 0 },
+ Package(){0x0005FFFF, 2, INTC, 0 },
+ Package(){0x0005FFFF, 3, INTD, 0 },
+ })
+
+ Name(APR1, Package(){
+ /* Internal graphics - RS780 VGA, Bus1, Dev5 */
+ Package(){0x0005FFFF, 0, 0, 18 },
+ Package(){0x0005FFFF, 1, 0, 19 },
+ /* Package(){0x0005FFFF, 2, 0, 20 }, */
+ /* Package(){0x0005FFFF, 3, 0, 17 }, */
+ })
+
+ Name(PS2, Package(){
+ /* The external GFX - Hooked to PCIe slot 2 */
+ Package(){0x0000FFFF, 0, INTC, 0 },
+ Package(){0x0000FFFF, 1, INTD, 0 },
+ Package(){0x0000FFFF, 2, INTA, 0 },
+ Package(){0x0000FFFF, 3, INTB, 0 },
+ })
+
+ Name(APS2, Package(){
+ /* The external GFX - Hooked to PCIe slot 2 */
+ Package(){0x0000FFFF, 0, 0, 18 },
+ Package(){0x0000FFFF, 1, 0, 19 },
+ Package(){0x0000FFFF, 2, 0, 16 },
+ Package(){0x0000FFFF, 3, 0, 17 },
+ })
+
+ Name(PS4, Package(){
+ /* PCIe slot - Hooked to PCIe slot 4 */
+ Package(){0x0000FFFF, 0, INTA, 0 },
+ Package(){0x0000FFFF, 1, INTB, 0 },
+ Package(){0x0000FFFF, 2, INTC, 0 },
+ Package(){0x0000FFFF, 3, INTD, 0 },
+ })
+
+ Name(APS4, Package(){
+ /* PCIe slot - Hooked to PCIe slot 4 */
+ Package(){0x0000FFFF, 0, 0, 16 },
+ Package(){0x0000FFFF, 1, 0, 17 },
+ Package(){0x0000FFFF, 2, 0, 18 },
+ Package(){0x0000FFFF, 3, 0, 19 },
+ })
+
+ Name(PS5, Package(){
+ /* PCIe slot - Hooked to PCIe slot 5 */
+ Package(){0x0000FFFF, 0, INTB, 0 },
+ Package(){0x0000FFFF, 1, INTC, 0 },
+ Package(){0x0000FFFF, 2, INTD, 0 },
+ Package(){0x0000FFFF, 3, INTA, 0 },
+ })
+
+ Name(APS5, Package(){
+ /* PCIe slot - Hooked to PCIe slot 5 */
+ Package(){0x0000FFFF, 0, 0, 17 },
+ Package(){0x0000FFFF, 1, 0, 18 },
+ Package(){0x0000FFFF, 2, 0, 19 },
+ Package(){0x0000FFFF, 3, 0, 16 },
+ })
+
+ Name(PS6, Package(){
+ /* PCIe slot - Hooked to PCIe slot 6 */
+ Package(){0x0000FFFF, 0, INTC, 0 },
+ Package(){0x0000FFFF, 1, INTD, 0 },
+ Package(){0x0000FFFF, 2, INTA, 0 },
+ Package(){0x0000FFFF, 3, INTB, 0 },
+ })
+
+ Name(APS6, Package(){
+ /* PCIe slot - Hooked to PCIe slot 6 */
+ Package(){0x0000FFFF, 0, 0, 18 },
+ Package(){0x0000FFFF, 1, 0, 19 },
+ Package(){0x0000FFFF, 2, 0, 16 },
+ Package(){0x0000FFFF, 3, 0, 17 },
+ })
+
+ Name(PS7, Package(){
+ /* The onboard Ethernet chip - Hooked to PCIe slot 7 */
+ Package(){0x0000FFFF, 0, INTD, 0 },
+ Package(){0x0000FFFF, 1, INTA, 0 },
+ Package(){0x0000FFFF, 2, INTB, 0 },
+ Package(){0x0000FFFF, 3, INTC, 0 },
+ })
+
+ Name(APS7, Package(){
+ /* The onboard Ethernet chip - Hooked to PCIe slot 7 */
+ Package(){0x0000FFFF, 0, 0, 19 },
+ Package(){0x0000FFFF, 1, 0, 16 },
+ Package(){0x0000FFFF, 2, 0, 17 },
+ Package(){0x0000FFFF, 3, 0, 18 },
+ })
+ Name(PS9, Package(){
+ /* PCIe slot - Hooked to PCIe slot 9 */
+ Package(){0x0000FFFF, 0, INTD, 0 },
+ Package(){0x0000FFFF, 1, INTA, 0 },
+ Package(){0x0000FFFF, 2, INTB, 0 },
+ Package(){0x0000FFFF, 3, INTC, 0 },
+ })
+
+ Name(APS9, Package(){
+ /* PCIe slot - Hooked to PCIe slot 9 */
+ Package(){0x0000FFFF, 0, 0, 17 },
+ Package(){0x0000FFFF, 1, 0, 18 },
+ Package(){0x0000FFFF, 2, 0, 19 },
+ Package(){0x0000FFFF, 3, 0, 16 },
+ })
+ Name(PSa, Package(){
+ /* PCIe slot - Hooked to PCIe slot 10 */
+ Package(){0x0000FFFF, 0, INTD, 0 },
+ Package(){0x0000FFFF, 1, INTA, 0 },
+ Package(){0x0000FFFF, 2, INTB, 0 },
+ Package(){0x0000FFFF, 3, INTC, 0 },
+ })
+
+ Name(APSa, Package(){
+ /* PCIe slot - Hooked to PCIe slot 10 */
+ Package(){0x0000FFFF, 0, 0, 18 },
+ Package(){0x0000FFFF, 1, 0, 19 },
+ Package(){0x0000FFFF, 2, 0, 16 },
+ Package(){0x0000FFFF, 3, 0, 17 },
+ })
+
+ Name(PCIB, Package(){
+ /* PCI slots: slot 0, slot 1, behind Dev14, Fun4. */
+ Package(){0x0005FFFF, 0, 0, 0x14 },
+ Package(){0x0005FFFF, 1, 0, 0x15 },
+ Package(){0x0005FFFF, 2, 0, 0x16 },
+ Package(){0x0005FFFF, 3, 0, 0x17 },
+ Package(){0x0006FFFF, 0, 0, 0x15 },
+ Package(){0x0006FFFF, 1, 0, 0x16 },
+ Package(){0x0006FFFF, 2, 0, 0x17 },
+ Package(){0x0006FFFF, 3, 0, 0x14 },
+ })
+}
--- /dev/null
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/* simple name description */
+
+/*
+Scope (_SB) {
+ Device(PCI0) {
+ Device(SATA) {
+ Name(_ADR, 0x00120000)
+ #include "sata.asl"
+ }
+ }
+}
+*/
+
+Name(STTM, Buffer(20) {
+ 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00,
+ 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00,
+ 0x1f, 0x00, 0x00, 0x00
+})
+
+/* Start by clearing the PhyRdyChg bits */
+Method(_INI) {
+ \_GPE._L1F()
+}
+
+Device(PMRY)
+{
+ Name(_ADR, 0)
+ Method(_GTM, 0x0, NotSerialized) {
+ Return(STTM)
+ }
+ Method(_STM, 0x3, NotSerialized) {}
+
+ Device(PMST) {
+ Name(_ADR, 0)
+ Method(_STA,0) {
+ if (LGreater(P0IS,0)) {
+ return (0x0F) /* sata is visible */
+ }
+ else {
+ return (0x00) /* sata is missing */
+ }
+ }
+ }/* end of PMST */
+
+ Device(PSLA)
+ {
+ Name(_ADR, 1)
+ Method(_STA,0) {
+ if (LGreater(P1IS,0)) {
+ return (0x0F) /* sata is visible */
+ }
+ else {
+ return (0x00) /* sata is missing */
+ }
+ }
+ } /* end of PSLA */
+} /* end of PMRY */
+
+
+Device(SEDY)
+{
+ Name(_ADR, 1) /* IDE Scondary Channel */
+ Method(_GTM, 0x0, NotSerialized) {
+ Return(STTM)
+ }
+ Method(_STM, 0x3, NotSerialized) {}
+
+ Device(SMST)
+ {
+ Name(_ADR, 0)
+ Method(_STA,0) {
+ if (LGreater(P2IS,0)) {
+ return (0x0F) /* sata is visible */
+ }
+ else {
+ return (0x00) /* sata is missing */
+ }
+ }
+ } /* end of SMST */
+
+ Device(SSLA)
+ {
+ Name(_ADR, 1)
+ Method(_STA,0) {
+ if (LGreater(P3IS,0)) {
+ return (0x0F) /* sata is visible */
+ }
+ else {
+ return (0x00) /* sata is missing */
+ }
+ }
+ } /* end of SSLA */
+} /* end of SEDY */
+
+/* SATA Hot Plug Support */
+Scope(\_GPE) {
+ Method(_L1F,0x0,NotSerialized) {
+ if (\_SB.P0PR) {
+ if (LGreater(\_SB.P0IS,0)) {
+ sleep(32)
+ }
+ Notify(\_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */
+ store(one, \_SB.P0PR)
+ }
+
+ if (\_SB.P1PR) {
+ if (LGreater(\_SB.P1IS,0)) {
+ sleep(32)
+ }
+ Notify(\_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */
+ store(one, \_SB.P1PR)
+ }
+
+ if (\_SB.P2PR) {
+ if (LGreater(\_SB.P2IS,0)) {
+ sleep(32)
+ }
+ Notify(\_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */
+ store(one, \_SB.P2PR)
+ }
+
+ if (\_SB.P3PR) {
+ if (LGreater(\_SB.P3IS,0)) {
+ sleep(32)
+ }
+ Notify(\_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */
+ store(one, \_SB.P3PR)
+ }
+ }
+}
--- /dev/null
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+
+/* Status and notification definitions */
+
+#define STA_MISSING 0x00
+#define STA_PRESENT 0x01
+#define STA_ENABLED 0x03
+#define STA_DISABLED 0x09
+#define STA_INVISIBLE 0x0B
+#define STA_UNAVAILABLE 0x0D
+#define STA_VISIBLE 0x0F
+
+/* SMBus status codes */
+#define SMB_OK 0x00
+#define SMB_UnknownFail 0x07
+#define SMB_DevAddrNAK 0x10
+#define SMB_DeviceError 0x11
+#define SMB_DevCmdDenied 0x12
+#define SMB_UnknownErr 0x13
+#define SMB_DevAccDenied 0x17
+#define SMB_Timeout 0x18
+#define SMB_HstUnsuppProtocol 0x19
+#define SMB_Busy 0x1A
+#define SMB_PktChkError 0x1F
+
+/* Device Object Notification Values */
+#define NOTIFY_BUS_CHECK 0x00
+#define NOTIFY_DEVICE_CHECK 0x01
+#define NOTIFY_DEVICE_WAKE 0x02
+#define NOTIFY_EJECT_REQUEST 0x03
+#define NOTIFY_DEVICE_CHECK_JR 0x04
+#define NOTIFY_FREQUENCY_ERROR 0x05
+#define NOTIFY_BUS_MODE 0x06
+#define NOTIFY_POWER_FAULT 0x07
+#define NOTIFY_CAPABILITIES 0x08
+#define NOTIFY_PLD_CHECK 0x09
+#define NOTIFY_SLIT_UPDATE 0x0B
+
+/* Battery Device Notification Values */
+#define NOTIFY_BAT_STATUSCHG 0x80
+#define NOTIFY_BAT_INFOCHG 0x81
+#define NOTIFY_BAT_MAINTDATA 0x82
+
+/* Power Source Object Notification Values */
+#define NOTIFY_PWR_STATUSCHG 0x80
+
+/* Thermal Zone Object Notification Values */
+#define NOTIFY_TZ_STATUSCHG 0x80
+#define NOTIFY_TZ_TRIPPTCHG 0x81
+#define NOTIFY_TZ_DEVLISTCHG 0x82
+#define NOTIFY_TZ_RELTBLCHG 0x83
+
+/* Power Button Notification Values */
+#define NOTIFY_POWER_BUTTON 0x80
+
+/* Sleep Button Notification Values */
+#define NOTIFY_SLEEP_BUTTON 0x80
+
+/* Lid Notification Values */
+#define NOTIFY_LID_STATUSCHG 0x80
+
+/* Processor Device Notification Values */
+#define NOTIFY_CPU_PPCCHG 0x80
+#define NOTIFY_CPU_CSTATECHG 0x81
+#define NOTIFY_CPU_THROTLCHG 0x82
+
+/* User Presence Device Notification Values */
+#define NOTIFY_USR_PRESNCECHG 0x80
+
+/* Battery Device Notification Values */
+#define NOTIFY_ALS_ILLUMCHG 0x80
+#define NOTIFY_ALS_COLORTMPCHG 0x81
+#define NOTIFY_ALS_RESPCHG 0x82
+
+
--- /dev/null
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/* simple name description */
+/*
+DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001
+ )
+ {
+ #include "usb.asl"
+ }
+*/
+Method(UCOC, 0) {
+ Sleep(20)
+ Store(0x13,CMTI)
+ Store(0,GPSL)
+}
+
+/* USB Port 0 overcurrent uses Gpm 0 */
+If(LLessEqual(UOM0,9)) {
+ Scope (\_GPE) {
+ Method (_L13) {
+ UCOC()
+ if(LEqual(GPB0,PLC0)) {
+ Not(PLC0,PLC0)
+ Store(PLC0, \_SB.PT0D)
+ }
+ }
+ }
+}
+
+/* USB Port 1 overcurrent uses Gpm 1 */
+If (LLessEqual(UOM1,9)) {
+ Scope (\_GPE) {
+ Method (_L14) {
+ UCOC()
+ if (LEqual(GPB1,PLC1)) {
+ Not(PLC1,PLC1)
+ Store(PLC1, \_SB.PT1D)
+ }
+ }
+ }
+}
+
+/* USB Port 2 overcurrent uses Gpm 2 */
+If (LLessEqual(UOM2,9)) {
+ Scope (\_GPE) {
+ Method (_L15) {
+ UCOC()
+ if (LEqual(GPB2,PLC2)) {
+ Not(PLC2,PLC2)
+ Store(PLC2, \_SB.PT2D)
+ }
+ }
+ }
+}
+
+/* USB Port 3 overcurrent uses Gpm 3 */
+If (LLessEqual(UOM3,9)) {
+ Scope (\_GPE) {
+ Method (_L16) {
+ UCOC()
+ if (LEqual(GPB3,PLC3)) {
+ Not(PLC3,PLC3)
+ Store(PLC3, \_SB.PT3D)
+ }
+ }
+ }
+}
+
+/* USB Port 4 overcurrent uses Gpm 4 */
+If (LLessEqual(UOM4,9)) {
+ Scope (\_GPE) {
+ Method (_L19) {
+ UCOC()
+ if (LEqual(GPB4,PLC4)) {
+ Not(PLC4,PLC4)
+ Store(PLC4, \_SB.PT4D)
+ }
+ }
+ }
+}
+
+/* USB Port 5 overcurrent uses Gpm 5 */
+If (LLessEqual(UOM5,9)) {
+ Scope (\_GPE) {
+ Method (_L1A) {
+ UCOC()
+ if (LEqual(GPB5,PLC5)) {
+ Not(PLC5,PLC5)
+ Store(PLC5, \_SB.PT5D)
+ }
+ }
+ }
+}
+
+/* USB Port 6 overcurrent uses Gpm 6 */
+If (LLessEqual(UOM6,9)) {
+ Scope (\_GPE) {
+ /* Method (_L1C) { */
+ Method (_L06) {
+ UCOC()
+ if (LEqual(GPB6,PLC6)) {
+ Not(PLC6,PLC6)
+ Store(PLC6, \_SB.PT6D)
+ }
+ }
+ }
+}
+
+/* USB Port 7 overcurrent uses Gpm 7 */
+If (LLessEqual(UOM7,9)) {
+ Scope (\_GPE) {
+ /* Method (_L1D) { */
+ Method (_L07) {
+ UCOC()
+ if (LEqual(GPB7,PLC7)) {
+ Not(PLC7,PLC7)
+ Store(PLC7, \_SB.PT7D)
+ }
+ }
+ }
+}
+
+/* USB Port 8 overcurrent uses Gpm 8 */
+If (LLessEqual(UOM8,9)) {
+ Scope (\_GPE) {
+ Method (_L17) {
+ if (LEqual(G8IS,PLC8)) {
+ Not(PLC8,PLC8)
+ Store(PLC8, \_SB.PT8D)
+ }
+ }
+ }
+}
+
+/* USB Port 9 overcurrent uses Gpm 9 */
+If (LLessEqual(UOM9,9)) {
+ Scope (\_GPE) {
+ Method (_L0E) {
+ if (LEqual(G9IS,0)) {
+ Store(1,\_SB.PT9D)
+ }
+ }
+ }
+}
--- /dev/null
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <string.h>
+#include <arch/acpi.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <cpu/x86/msr.h>
+#include <cpu/amd/mtrr.h>
+#include <cpu/amd/amdk8_sysconf.h>
+#include <../../../northbridge/amd/amdk8/amdk8_acpi.h>
+#include <arch/cpu.h>
+#include <cpu/amd/model_fxx_powernow.h>
+
+extern u16 pm_base;
+
+#define DUMP_ACPI_TABLES 0
+
+/*
+* Assume the max pstate number is 8
+* 0x21(33 bytes) is one package length of _PSS package
+*/
+
+#define Maxpstate 8
+#define Defpkglength 0x21
+
+#if DUMP_ACPI_TABLES == 1
+static void dump_mem(u32 start, u32 end)
+{
+
+ u32 i;
+ print_debug("dump_mem:");
+ for (i = start; i < end; i++) {
+ if ((i & 0xf) == 0) {
+ printk(BIOS_DEBUG, "\n%08x:", i);
+ }
+ printk(BIOS_DEBUG, " %02x", (u8)*((u8 *)i));
+ }
+ print_debug("\n");
+}
+#endif
+
+extern const acpi_header_t AmlCode;
+
+#if CONFIG_ACPI_SSDTX_NUM >= 1
+extern const acpi_header_t AmlCode_ssdt2;
+extern const acpi_header_t AmlCode_ssdt3;
+extern const acpi_header_t AmlCode_ssdt4;
+extern const acpi_header_t AmlCode_ssdt5;
+#endif
+
+#define IO_APIC_ADDR 0xfec00000UL
+
+unsigned long acpi_fill_mcfg(unsigned long current)
+{
+ /* Just a dummy */
+ return current;
+}
+
+unsigned long acpi_fill_madt(unsigned long current)
+{
+ /* create all subtables for processors */
+ current = acpi_create_madt_lapics(current);
+
+ /* Write SB700 IOAPIC, only one */
+ current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, 2,
+ IO_APIC_ADDR, 0);
+
+ current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
+ current, 0, 0, 2, 0);
+ current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
+ current, 0, 9, 9, 0xF);
+ /* 0: mean bus 0--->ISA */
+ /* 0: PIC 0 */
+ /* 2: APIC 2 */
+ /* 5 mean: 0101 --> Edige-triggered, Active high */
+
+ /* create all subtables for processors */
+ /* current = acpi_create_madt_lapic_nmis(current, 5, 1); */
+ /* 1: LINT1 connect to NMI */
+
+ return current;
+}
+
+extern void get_bus_conf(void);
+
+#if CONFIG_ACPI_SSDTX_NUM >= 1
+static void update_ssdtx(void *ssdtx, int i)
+{
+ u8 *PCI;
+ u8 *HCIN;
+ u8 *UID;
+
+ PCI = ssdtx + 0x32;
+ HCIN = ssdtx + 0x39;
+ UID = ssdtx + 0x40;
+
+ if (i < 7) {
+ *PCI = (u8) ('4' + i - 1);
+ } else {
+ *PCI = (u8) ('A' + i - 1 - 6);
+ }
+ *HCIN = (u8) i;
+ *UID = (u8) (i + 3);
+
+ /* FIXME: need to update the GSI id in the ssdtx too */
+
+}
+#endif
+
+unsigned long acpi_fill_ssdt_generator(unsigned long current, const char *oem_table_id) {
+ k8acpi_write_vars();
+ amd_model_fxx_generate_powernow(pm_base + 8, 6, 1);
+ return (unsigned long) (acpigen_get_current());
+}
+
+unsigned long write_acpi_tables(unsigned long start)
+{
+ unsigned long current;
+ acpi_rsdp_t *rsdp;
+ acpi_rsdt_t *rsdt;
+ acpi_hpet_t *hpet;
+ acpi_madt_t *madt;
+ acpi_fadt_t *fadt;
+ acpi_facs_t *facs;
+ acpi_header_t *dsdt;
+ acpi_header_t *ssdt;
+#if CONFIG_ACPI_SSDTX_NUM >= 1
+ acpi_header_t *ssdtx;
+ acpi_header_t const *p;
+ int i;
+#endif
+
+ get_bus_conf(); /* it will get sblk, pci1234, hcdn, and sbdn */
+
+ /* Align ACPI tables to 16 bytes */
+ start = (start + 0x0f) & -0x10;
+ current = start;
+
+ printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start);
+
+ /* We need at least an RSDP and an RSDT Table */
+ rsdp = (acpi_rsdp_t *) current;
+ current += sizeof(acpi_rsdp_t);
+ rsdt = (acpi_rsdt_t *) current;
+ current += sizeof(acpi_rsdt_t);
+
+ /* clear all table memory */
+ memset((void *)start, 0, current - start);
+
+ acpi_write_rsdp(rsdp, rsdt, NULL);
+ acpi_write_rsdt(rsdt);
+
+ /*
+ * We explicitly add these tables later on:
+ */
+ /* If we want to use HPET Timers Linux wants an MADT */
+ printk(BIOS_DEBUG, "ACPI: * HPET\n");
+ hpet = (acpi_hpet_t *) current;
+ current += sizeof(acpi_hpet_t);
+ acpi_create_hpet(hpet);
+ acpi_add_table(rsdp, hpet);
+
+ printk(BIOS_DEBUG, "ACPI: * MADT\n");
+ madt = (acpi_madt_t *) current;
+ acpi_create_madt(madt);
+ current += madt->header.length;
+ acpi_add_table(rsdp, madt);
+
+ /* SSDT */
+ printk(BIOS_DEBUG, "ACPI: * SSDT\n");
+ ssdt = (acpi_header_t *)current;
+
+ acpi_create_ssdt_generator(ssdt, "DYNADATA");
+ current += ssdt->length;
+ acpi_add_table(rsdp, ssdt);
+
+#if CONFIG_ACPI_SSDTX_NUM >= 1
+
+ /* same htio, but different position? We may have to copy, change HCIN, and recalculate the checknum and add_table */
+
+ for (i = 1; i < sysconf.hc_possible_num; i++) { /* 0: is hc sblink */
+ if ((sysconf.pci1234[i] & 1) != 1)
+ continue;
+ u8 c;
+ if (i < 7) {
+ c = (u8) ('4' + i - 1);
+ } else {
+ c = (u8) ('A' + i - 1 - 6);
+ }
+ printk(BIOS_DEBUG, "ACPI: * SSDT for PCI%c Aka hcid = %d\n", c, sysconf.hcid[i]); /* pci0 and pci1 are in dsdt */
+ current = (current + 0x07) & -0x08;
+ ssdtx = (acpi_header_t *) current;
+ switch (sysconf.hcid[i]) {
+ case 1: /* 8132 */
+ p = &AmlCode_ssdt2;
+ break;
+ case 2: /* 8151 */
+ p = &AmlCode_ssdt3;
+ break;
+ case 3: /* 8131 */
+ p = &AmlCode_ssdt4;
+ break;
+ default:
+ /* HTX no io apic */
+ p = &AmlCode_ssdt5;
+ break;
+ }
+ current += p->length;
+ memcpy((void *)ssdtx, p, p->length);
+ update_ssdtx((void *)ssdtx, i);
+ ssdtx->checksum = 0;
+ ssdtx->checksum = acpi_checksum((u8 *)ssdtx, ssdtx->length);
+ acpi_add_table(rsdp, ssdtx);
+ }
+#endif
+
+ /* FACS */
+ printk(BIOS_DEBUG, "ACPI: * FACS\n");
+ facs = (acpi_facs_t *) current;
+ current += sizeof(acpi_facs_t);
+ acpi_create_facs(facs);
+
+ /* DSDT */
+ printk(BIOS_DEBUG, "ACPI: * DSDT\n");
+ dsdt = (acpi_header_t *) current;
+ memcpy((void *)dsdt, &AmlCode, AmlCode.length);
+ current += dsdt->length;
+ printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n", dsdt, dsdt->length);
+ /* FADT */
+ printk(BIOS_DEBUG, "ACPI: * FADT\n");
+ fadt = (acpi_fadt_t *) current;
+ current += sizeof(acpi_fadt_t);
+
+ acpi_create_fadt(fadt, facs, dsdt);
+ acpi_add_table(rsdp, fadt);
+
+#if DUMP_ACPI_TABLES == 1
+ printk(BIOS_DEBUG, "rsdp\n");
+ dump_mem(rsdp, ((void *)rsdp) + sizeof(acpi_rsdp_t));
+
+ printk(BIOS_DEBUG, "rsdt\n");
+ dump_mem(rsdt, ((void *)rsdt) + sizeof(acpi_rsdt_t));
+
+ printk(BIOS_DEBUG, "madt\n");
+ dump_mem(madt, ((void *)madt) + madt->header.length);
+
+ printk(BIOS_DEBUG, "ssdt\n");
+ dump_mem(ssdt, ((void *)ssdt) + ssdt->length);
+
+ printk(BIOS_DEBUG, "fadt\n");
+ dump_mem(fadt, ((void *)fadt) + fadt->header.length);
+#endif
+
+ printk(BIOS_INFO, "ACPI: done.\n");
+ return current;
+}
--- /dev/null
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+extern struct chip_operations mainboard_ops;
+
+struct mainboard_config
+{
+ u32 uma_size; /* How many UMA should be used in memory for TOP. */
+};
+
--- /dev/null
+##
+## This file is part of the coreboot project.
+##
+## Copyright (C) 2010 Advanced Micro Devices, Inc.
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; version 2 of the License.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+##
+##
+##
+
+entries
+
+#start-bit length config config-ID name
+#0 8 r 0 seconds
+#8 8 r 0 alarm_seconds
+#16 8 r 0 minutes
+#24 8 r 0 alarm_minutes
+#32 8 r 0 hours
+#40 8 r 0 alarm_hours
+#48 8 r 0 day_of_week
+#56 8 r 0 day_of_month
+#64 8 r 0 month
+#72 8 r 0 year
+#80 4 r 0 rate_select
+#84 3 r 0 REF_Clock
+#87 1 r 0 UIP
+#88 1 r 0 auto_switch_DST
+#89 1 r 0 24_hour_mode
+#90 1 r 0 binary_values_enable
+#91 1 r 0 square-wave_out_enable
+#92 1 r 0 update_finished_enable
+#93 1 r 0 alarm_interrupt_enable
+#94 1 r 0 periodic_interrupt_enable
+#95 1 r 0 disable_clock_updates
+#96 288 r 0 temporary_filler
+0 384 r 0 reserved_memory
+384 1 e 4 boot_option
+385 1 e 4 last_boot
+386 1 e 1 ECC_memory
+388 4 r 0 reboot_bits
+392 3 e 5 baud_rate
+395 1 e 1 hw_scrubber
+396 1 e 1 interleave_chip_selects
+397 2 e 8 max_mem_clock
+399 1 e 2 dual_core
+400 1 e 1 power_on_after_fail
+412 4 e 6 debug_level
+416 4 e 7 boot_first
+420 4 e 7 boot_second
+424 4 e 7 boot_third
+428 4 h 0 boot_index
+432 8 h 0 boot_countdown
+440 4 e 9 slow_cpu
+444 1 e 1 nmi
+445 1 e 1 iommu
+728 256 h 0 user_data
+984 16 h 0 check_sum
+# Reserve the extended AMD configuration registers
+1000 24 r 0 reserved_memory
+
+
+
+enumerations
+
+#ID value text
+1 0 Disable
+1 1 Enable
+2 0 Enable
+2 1 Disable
+4 0 Fallback
+4 1 Normal
+5 0 115200
+5 1 57600
+5 2 38400
+5 3 19200
+5 4 9600
+5 5 4800
+5 6 2400
+5 7 1200
+6 6 Notice
+6 7 Info
+6 8 Debug
+6 9 Spew
+7 0 Network
+7 1 HDD
+7 2 Floppy
+7 8 Fallback_Network
+7 9 Fallback_HDD
+7 10 Fallback_Floppy
+#7 3 ROM
+8 0 DDR400
+8 1 DDR333
+8 2 DDR266
+8 3 DDR200
+9 0 off
+9 1 87.5%
+9 2 75.0%
+9 3 62.5%
+9 4 50.0%
+9 5 37.5%
+9 6 25.0%
+9 7 12.5%
+
+checksums
+
+checksum 392 983 984
+
+
--- /dev/null
+#Define gpp_configuration, A=0, B=1, C=2, D=3, E=4(default)
+#Define port_enable, (bit map): GFX(2,3), GPP(4,5,6,7)
+#Define gfx_dev2_dev3, 0: a link will never be established on Dev2 or Dev3,
+# 1: the system allows a PCIE link to be established on Dev2 or Dev3.
+#Define gfx_dual_slot, 0: single slot, 1: dual slot
+#Define gfx_lane_reversal, 0: disable lane reversal, 1: enable
+#Define gfx_tmds, 0: didn't support TMDS, 1: support
+#Define gfx_compliance, 0: didn't support compliance, 1: support
+#Define gfx_reconfiguration, 0: short reconfiguration, 1(default): long reconfiguration
+#Define gfx_link_width, 0: x16, 1: x1, 2: x2, 3: x4, 4: x8, 5: x12 (not supported), 6: x16
+chip northbridge/amd/amdk8/root_complex
+ device apic_cluster 0 on
+ chip cpu/amd/socket_939
+ device apic 0 on end
+ end
+ end
+ device pci_domain 0 on
+ chip northbridge/amd/amdk8
+ device pci 18.0 on # southbridge
+ chip southbridge/amd/rs780
+ device pci 0.0 on end # HT 0x9600
+ device pci 1.0 on end # Internal Graphics P2P bridge 0x9602
+ device pci 2.0 on end # PCIE P2P bridge (external graphics) 0x9603
+ device pci 3.0 on end # PCIE P2P bridge 0x960b
+ device pci 4.0 on end # PCIE P2P bridge 0x9604
+ device pci 5.0 off end # PCIE P2P bridge 0x9605
+ device pci 6.0 off end # PCIE P2P bridge 0x9606
+ device pci 7.0 off end # PCIE P2P bridge 0x9607
+ device pci 8.0 off end # NB/SB Link P2P bridge
+ device pci 9.0 on end #
+ device pci a.0 on end #
+ register "gppsb_configuration" = "1" # Configuration B
+ register "gpp_configuration" = "3" # Configuration D default
+ register "port_enable" = "0x6fc"
+ register "gfx_dev2_dev3" = "1"
+ register "gfx_dual_slot" = "1"
+ register "gfx_lane_reversal" = "0"
+ register "gfx_tmds" = "0"
+ register "gfx_compliance" = "0"
+ register "gfx_reconfiguration" = "1"
+ register "gfx_link_width" = "0"
+ end
+ chip southbridge/amd/sb700 # it is under NB/SB Link, but on the same pri bus
+ device pci 11.0 on end # SATA
+ device pci 12.0 on end # USB
+ device pci 12.1 on end # USB
+ device pci 12.2 on end # USB
+ device pci 13.0 on end # USB
+ device pci 13.1 on end # USB
+ device pci 13.2 on end # USB
+ device pci 14.0 on # SM
+ chip drivers/generic/generic #dimm 0-0-0
+ device i2c 50 on end
+ end
+ chip drivers/generic/generic #dimm 0-0-1
+ device i2c 51 on end
+ end
+ chip drivers/generic/generic #dimm 0-1-0
+ device i2c 52 on end
+ end
+ chip drivers/generic/generic #dimm 0-1-1
+ device i2c 53 on end
+ end
+ end # SM
+ device pci 14.1 on end # IDE 0x439c
+ device pci 14.2 on end # HDA 0x4383
+ device pci 14.3 on # LPC 0x439d
+
+ chip superio/winbond/w83627dhg
+ device pnp 2e.0 off # Floppy
+ io 0x60 = 0x3f0
+ irq 0x70 = 6
+ drq 0x74 = 2
+ end
+ device pnp 2e.1 off # Parallel Port
+ io 0x60 = 0x378
+ irq 0x70 = 7
+ end
+ device pnp 2e.2 on # Com1
+ io 0x60 = 0x3f8
+ irq 0x70 = 4
+ end
+ device pnp 2e.3 on # Com2
+ io 0x60 = 0x2f8
+ irq 0x70 = 3
+ end
+ device pnp 2e.5 on # Keyboard
+ io 0x60 = 0x60
+ io 0x62 = 0x64
+ irq 0x70 = 1
+ end
+ #device pnp 2e.6 off # SPI
+ #end
+ device pnp 2e.307 off # GPIO6
+ end
+ device pnp 2e.8 on # WDTO#, PLED
+ end
+ device pnp 2e.009 on # GPIO2
+ end
+ device pnp 2e.109 on # GPIO3
+ end
+ device pnp 2e.209 on # GPIO4
+ end
+ device pnp 2e.309 off # GPIO5
+ end
+ device pnp 2e.a off # ACPI
+ end
+ device pnp 2e.b on # HWM
+ io 0x60 = 0x290
+ end
+ device pnp 2e.c off # PECI, SST
+ end
+ end #superio/winbond/w8362
+
+ end #LPC
+ device pci 14.4 on end # PCI 0x4384
+ device pci 14.5 on end # USB 2
+ register "ide0_enable" = "1"
+ register "sata0_enable" = "1"
+ register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE
+ register "hda_viddid" = "0x10ec0882"
+ end #southbridge/amd/sb700
+ end # device pci 18.0
+
+ device pci 18.0 on end
+ device pci 18.0 on end
+ device pci 18.1 on end
+ device pci 18.2 on end
+ device pci 18.3 on end
+ end #northbridge/amd/amdk8
+ end #pci_domain
+end #northbridge/amd/amdk8/root_complex
+
--- /dev/null
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/* DefinitionBlock Statement */
+DefinitionBlock (
+ "DSDT.AML", /* Output filename */
+ "DSDT", /* Signature */
+ 0x02, /* DSDT Revision, needs to be 2 for 64bit */
+ "ASROCK", /* OEMID */
+ "939A785GM", /* TABLE ID */
+ 0x00010001 /* OEM Revision */
+ )
+{ /* Start of ASL file */
+ /* #include "acpi/debug.asl" */ /* Include global debug methods if needed */
+
+ /* Data to be patched by the BIOS during POST */
+ /* FIXME the patching is not done yet! */
+ /* Memory related values */
+ Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */
+ Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */
+ Name(PBLN, 0x0) /* Length of BIOS area */
+
+ Name(PCBA, 0xE0000000) /* Base address of PCIe config space */
+ Name(HPBA, 0xFED00000) /* Base address of HPET table */
+
+ Name(SSFG, 0x0D) /* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */
+
+ /* USB overcurrent mapping pins. */
+ Name(UOM0, 0)
+ Name(UOM1, 2)
+ Name(UOM2, 0)
+ Name(UOM3, 7)
+ Name(UOM4, 2)
+ Name(UOM5, 2)
+ Name(UOM6, 6)
+ Name(UOM7, 2)
+ Name(UOM8, 6)
+ Name(UOM9, 6)
+
+ /* Some global data */
+ Name(OSTP, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */
+ Name(OSV, Ones) /* Assume nothing */
+ Name(PMOD, One) /* Assume APIC */
+
+ /* PIC IRQ mapping registers, C00h-C01h */
+ OperationRegion(PRQM, SystemIO, 0x00000C00, 0x00000002)
+ Field(PRQM, ByteAcc, NoLock, Preserve) {
+ PRQI, 0x00000008,
+ PRQD, 0x00000008, /* Offset: 1h */
+ }
+ IndexField(PRQI, PRQD, ByteAcc, NoLock, Preserve) {
+ PINA, 0x00000008, /* Index 0 */
+ PINB, 0x00000008, /* Index 1 */
+ PINC, 0x00000008, /* Index 2 */
+ PIND, 0x00000008, /* Index 3 */
+ AINT, 0x00000008, /* Index 4 */
+ SINT, 0x00000008, /* Index 5 */
+ , 0x00000008, /* Index 6 */
+ AAUD, 0x00000008, /* Index 7 */
+ AMOD, 0x00000008, /* Index 8 */
+ PINE, 0x00000008, /* Index 9 */
+ PINF, 0x00000008, /* Index A */
+ PING, 0x00000008, /* Index B */
+ PINH, 0x00000008, /* Index C */
+ }
+
+ /* PCI Error control register */
+ OperationRegion(PERC, SystemIO, 0x00000C14, 0x00000001)
+ Field(PERC, ByteAcc, NoLock, Preserve) {
+ SENS, 0x00000001,
+ PENS, 0x00000001,
+ SENE, 0x00000001,
+ PENE, 0x00000001,
+ }
+
+ /* Client Management index/data registers */
+ OperationRegion(CMT, SystemIO, 0x00000C50, 0x00000002)
+ Field(CMT, ByteAcc, NoLock, Preserve) {
+ CMTI, 8,
+ /* Client Management Data register */
+ G64E, 1,
+ G64O, 1,
+ G32O, 2,
+ , 2,
+ GPSL, 2,
+ }
+
+ /* GPM Port register */
+ OperationRegion(GPT, SystemIO, 0x00000C52, 0x00000001)
+ Field(GPT, ByteAcc, NoLock, Preserve) {
+ GPB0,1,
+ GPB1,1,
+ GPB2,1,
+ GPB3,1,
+ GPB4,1,
+ GPB5,1,
+ GPB6,1,
+ GPB7,1,
+ }
+
+ /* Flash ROM program enable register */
+ OperationRegion(FRE, SystemIO, 0x00000C6F, 0x00000001)
+ Field(FRE, ByteAcc, NoLock, Preserve) {
+ , 0x00000006,
+ FLRE, 0x00000001,
+ }
+
+ /* PM2 index/data registers */
+ OperationRegion(PM2R, SystemIO, 0x00000CD0, 0x00000002)
+ Field(PM2R, ByteAcc, NoLock, Preserve) {
+ PM2I, 0x00000008,
+ PM2D, 0x00000008,
+ }
+
+ /* Power Management I/O registers */
+ OperationRegion(PIOR, SystemIO, 0x00000CD6, 0x00000002)
+ Field(PIOR, ByteAcc, NoLock, Preserve) {
+ PIOI, 0x00000008,
+ PIOD, 0x00000008,
+ }
+ IndexField (PIOI, PIOD, ByteAcc, NoLock, Preserve) {
+ Offset(0x00), /* MiscControl */
+ , 1,
+ T1EE, 1,
+ T2EE, 1,
+ Offset(0x01), /* MiscStatus */
+ , 1,
+ T1E, 1,
+ T2E, 1,
+ Offset(0x04), /* SmiWakeUpEventEnable3 */
+ , 7,
+ SSEN, 1,
+ Offset(0x07), /* SmiWakeUpEventStatus3 */
+ , 7,
+ CSSM, 1,
+ Offset(0x10), /* AcpiEnable */
+ , 6,
+ PWDE, 1,
+ Offset(0x1C), /* ProgramIoEnable */
+ , 3,
+ MKME, 1,
+ IO3E, 1,
+ IO2E, 1,
+ IO1E, 1,
+ IO0E, 1,
+ Offset(0x1D), /* IOMonitorStatus */
+ , 3,
+ MKMS, 1,
+ IO3S, 1,
+ IO2S, 1,
+ IO1S, 1,
+ IO0S,1,
+ Offset(0x20), /* AcpiPmEvtBlk */
+ APEB, 16,
+ Offset(0x36), /* GEvtLevelConfig */
+ , 6,
+ ELC6, 1,
+ ELC7, 1,
+ Offset(0x37), /* GPMLevelConfig0 */
+ , 3,
+ PLC0, 1,
+ PLC1, 1,
+ PLC2, 1,
+ PLC3, 1,
+ PLC8, 1,
+ Offset(0x38), /* GPMLevelConfig1 */
+ , 1,
+ PLC4, 1,
+ PLC5, 1,
+ , 1,
+ PLC6, 1,
+ PLC7, 1,
+ Offset(0x3B), /* PMEStatus1 */
+ GP0S, 1,
+ GM4S, 1,
+ GM5S, 1,
+ APS, 1,
+ GM6S, 1,
+ GM7S, 1,
+ GP2S, 1,
+ STSS, 1,
+ Offset(0x55), /* SoftPciRst */
+ SPRE, 1,
+ , 1,
+ , 1,
+ PNAT, 1,
+ PWMK, 1,
+ PWNS, 1,
+
+ /* Offset(0x61), */ /* Options_1 */
+ /* ,7, */
+ /* R617,1, */
+
+ Offset(0x65), /* UsbPMControl */
+ , 4,
+ URRE, 1,
+ Offset(0x68), /* MiscEnable68 */
+ , 3,
+ TMTE, 1,
+ , 1,
+ Offset(0x92), /* GEVENTIN */
+ , 7,
+ E7IS, 1,
+ Offset(0x96), /* GPM98IN */
+ G8IS, 1,
+ G9IS, 1,
+ Offset(0x9A), /* EnhanceControl */
+ ,7,
+ HPDE, 1,
+ Offset(0xA8), /* PIO7654Enable */
+ IO4E, 1,
+ IO5E, 1,
+ IO6E, 1,
+ IO7E, 1,
+ Offset(0xA9), /* PIO7654Status */
+ IO4S, 1,
+ IO5S, 1,
+ IO6S, 1,
+ IO7S, 1,
+ }
+
+ /* PM1 Event Block
+ * First word is PM1_Status, Second word is PM1_Enable
+ */
+ OperationRegion(P1EB, SystemIO, APEB, 0x04)
+ Field(P1EB, ByteAcc, NoLock, Preserve) {
+ TMST, 1,
+ , 3,
+ BMST, 1,
+ GBST, 1,
+ Offset(0x01),
+ PBST, 1,
+ , 1,
+ RTST, 1,
+ , 3,
+ PWST, 1,
+ SPWS, 1,
+ Offset(0x02),
+ TMEN, 1,
+ , 4,
+ GBEN, 1,
+ Offset(0x03),
+ PBEN, 1,
+ , 1,
+ RTEN, 1,
+ , 3,
+ PWDA, 1,
+ }
+
+ Scope(\_SB) {
+ /* PCIe Configuration Space for 16 busses */
+ OperationRegion(PCFG, SystemMemory, PCBA, 0x01000000) /* Each bus consumes 1MB */
+ Field(PCFG, ByteAcc, NoLock, Preserve) {
+ /* Byte offsets are computed using the following technique:
+ * ((bus number + 1) * ((device number * 8) * 4096)) + register offset
+ * The 8 comes from 8 functions per device, and 4096 bytes per function config space
+ */
+ Offset(0x00090024), /* Byte offset to SATA register 24h - Bus 0, Device 18, Function 0 */
+ STB5, 32,
+ Offset(0x00098042), /* Byte offset to OHCI0 register 42h - Bus 0, Device 19, Function 0 */
+ PT0D, 1,
+ PT1D, 1,
+ PT2D, 1,
+ PT3D, 1,
+ PT4D, 1,
+ PT5D, 1,
+ PT6D, 1,
+ PT7D, 1,
+ PT8D, 1,
+ PT9D, 1,
+ Offset(0x000A0004), /* Byte offset to SMBUS register 4h - Bus 0, Device 20, Function 0 */
+ SBIE, 1,
+ SBME, 1,
+ Offset(0x000A0008), /* Byte offset to SMBUS register 8h - Bus 0, Device 20, Function 0 */
+ SBRI, 8,
+ Offset(0x000A0014), /* Byte offset to SMBUS register 14h - Bus 0, Device 20, Function 0 */
+ SBB1, 32,
+ Offset(0x000A0078), /* Byte offset to SMBUS register 78h - Bus 0, Device 20, Function 0 */
+ ,14,
+ P92E, 1, /* Port92 decode enable */
+ }
+
+ OperationRegion(SB5, SystemMemory, STB5, 0x1000)
+ Field(SB5, AnyAcc, NoLock, Preserve){
+ /* Port 0 */
+ Offset(0x120), /* Port 0 Task file status */
+ P0ER, 1,
+ , 2,
+ P0DQ, 1,
+ , 3,
+ P0BY, 1,
+ Offset(0x128), /* Port 0 Serial ATA status */
+ P0DD, 4,
+ , 4,
+ P0IS, 4,
+ Offset(0x12C), /* Port 0 Serial ATA control */
+ P0DI, 4,
+ Offset(0x130), /* Port 0 Serial ATA error */
+ , 16,
+ P0PR, 1,
+
+ /* Port 1 */
+ offset(0x1A0), /* Port 1 Task file status */
+ P1ER, 1,
+ , 2,
+ P1DQ, 1,
+ , 3,
+ P1BY, 1,
+ Offset(0x1A8), /* Port 1 Serial ATA status */
+ P1DD, 4,
+ , 4,
+ P1IS, 4,
+ Offset(0x1AC), /* Port 1 Serial ATA control */
+ P1DI, 4,
+ Offset(0x1B0), /* Port 1 Serial ATA error */
+ , 16,
+ P1PR, 1,
+
+ /* Port 2 */
+ Offset(0x220), /* Port 2 Task file status */
+ P2ER, 1,
+ , 2,
+ P2DQ, 1,
+ , 3,
+ P2BY, 1,
+ Offset(0x228), /* Port 2 Serial ATA status */
+ P2DD, 4,
+ , 4,
+ P2IS, 4,
+ Offset(0x22C), /* Port 2 Serial ATA control */
+ P2DI, 4,
+ Offset(0x230), /* Port 2 Serial ATA error */
+ , 16,
+ P2PR, 1,
+
+ /* Port 3 */
+ Offset(0x2A0), /* Port 3 Task file status */
+ P3ER, 1,
+ , 2,
+ P3DQ, 1,
+ , 3,
+ P3BY, 1,
+ Offset(0x2A8), /* Port 3 Serial ATA status */
+ P3DD, 4,
+ , 4,
+ P3IS, 4,
+ Offset(0x2AC), /* Port 3 Serial ATA control */
+ P3DI, 4,
+ Offset(0x2B0), /* Port 3 Serial ATA error */
+ , 16,
+ P3PR, 1,
+ }
+ }
+
+
+ #include "acpi/routing.asl"
+
+ Scope(\_SB) {
+
+ Method(CkOT, 0){
+
+ if(LNotEqual(OSTP, Ones)) {Return(OSTP)} /* OS version was already detected */
+
+ if(CondRefOf(\_OSI,Local1))
+ {
+ Store(1, OSTP) /* Assume some form of XP */
+ if (\_OSI("Windows 2006")) /* Vista */
+ {
+ Store(2, OSTP)
+ }
+ } else {
+ If(WCMP(\_OS,"Linux")) {
+ Store(3, OSTP) /* Linux */
+ } Else {
+ Store(4, OSTP) /* Gotta be WinCE */
+ }
+ }
+ Return(OSTP)
+ }
+
+ Method(_PIC, 0x01, NotSerialized)
+ {
+ If (Arg0)
+ {
+ \_SB.CIRQ()
+ }
+ Store(Arg0, PMOD)
+ }
+ Method(CIRQ, 0x00, NotSerialized){
+ Store(0, PINA)
+ Store(0, PINB)
+ Store(0, PINC)
+ Store(0, PIND)
+ Store(0, PINE)
+ Store(0, PINF)
+ Store(0, PING)
+ Store(0, PINH)
+ }
+
+ Name(IRQB, ResourceTemplate(){
+ IRQ(Level,ActiveLow,Shared){15}
+ })
+
+ Name(IRQP, ResourceTemplate(){
+ IRQ(Level,ActiveLow,Exclusive){3, 4, 5, 7, 10, 11, 12, 15}
+ })
+
+ Name(PITF, ResourceTemplate(){
+ IRQ(Level,ActiveLow,Exclusive){9}
+ })
+
+ Device(INTA) {
+ Name(_HID, EISAID("PNP0C0F"))
+ Name(_UID, 1)
+
+ Method(_STA, 0) {
+ if (PINA) {
+ Return(0x0B) /* sata is invisible */
+ } else {
+ Return(0x09) /* sata is disabled */
+ }
+ } /* End Method(_SB.INTA._STA) */
+
+ Method(_DIS ,0) {
+ /* DBGO("\\_SB\\LNKA\\_DIS\n") */
+ Store(0, PINA)
+ } /* End Method(_SB.INTA._DIS) */
+
+ Method(_PRS ,0) {
+ /* DBGO("\\_SB\\LNKA\\_PRS\n") */
+ Return(IRQP)
+ } /* Method(_SB.INTA._PRS) */
+
+ Method(_CRS ,0) {
+ /* DBGO("\\_SB\\LNKA\\_CRS\n") */
+ CreateWordField(IRQB, 0x1, IRQN)
+ ShiftLeft(1, PINA, IRQN)
+ Return(IRQB)
+ } /* Method(_SB.INTA._CRS) */
+
+ Method(_SRS, 1) {
+ /* DBGO("\\_SB\\LNKA\\_CRS\n") */
+ CreateWordField(ARG0, 1, IRQM)
+
+ /* Use lowest available IRQ */
+ FindSetRightBit(IRQM, Local0)
+ if (Local0) {
+ Decrement(Local0)
+ }
+ Store(Local0, PINA)
+ } /* End Method(_SB.INTA._SRS) */
+ } /* End Device(INTA) */
+
+ Device(INTB) {
+ Name(_HID, EISAID("PNP0C0F"))
+ Name(_UID, 2)
+
+ Method(_STA, 0) {
+ if (PINB) {
+ Return(0x0B) /* sata is invisible */
+ } else {
+ Return(0x09) /* sata is disabled */
+ }
+ } /* End Method(_SB.INTB._STA) */
+
+ Method(_DIS ,0) {
+ /* DBGO("\\_SB\\LNKB\\_DIS\n") */
+ Store(0, PINB)
+ } /* End Method(_SB.INTB._DIS) */
+
+ Method(_PRS ,0) {
+ /* DBGO("\\_SB\\LNKB\\_PRS\n") */
+ Return(IRQP)
+ } /* Method(_SB.INTB._PRS) */
+
+ Method(_CRS ,0) {
+ /* DBGO("\\_SB\\LNKB\\_CRS\n") */
+ CreateWordField(IRQB, 0x1, IRQN)
+ ShiftLeft(1, PINB, IRQN)
+ Return(IRQB)
+ } /* Method(_SB.INTB._CRS) */
+
+ Method(_SRS, 1) {
+ /* DBGO("\\_SB\\LNKB\\_CRS\n") */
+ CreateWordField(ARG0, 1, IRQM)
+
+ /* Use lowest available IRQ */
+ FindSetRightBit(IRQM, Local0)
+ if (Local0) {
+ Decrement(Local0)
+ }
+ Store(Local0, PINB)
+ } /* End Method(_SB.INTB._SRS) */
+ } /* End Device(INTB) */
+
+ Device(INTC) {
+ Name(_HID, EISAID("PNP0C0F"))
+ Name(_UID, 3)
+
+ Method(_STA, 0) {
+ if (PINC) {
+ Return(0x0B) /* sata is invisible */
+ } else {
+ Return(0x09) /* sata is disabled */
+ }
+ } /* End Method(_SB.INTC._STA) */
+
+ Method(_DIS ,0) {
+ /* DBGO("\\_SB\\LNKC\\_DIS\n") */
+ Store(0, PINC)
+ } /* End Method(_SB.INTC._DIS) */
+
+ Method(_PRS ,0) {
+ /* DBGO("\\_SB\\LNKC\\_PRS\n") */
+ Return(IRQP)
+ } /* Method(_SB.INTC._PRS) */
+
+ Method(_CRS ,0) {
+ /* DBGO("\\_SB\\LNKC\\_CRS\n") */
+ CreateWordField(IRQB, 0x1, IRQN)
+ ShiftLeft(1, PINC, IRQN)
+ Return(IRQB)
+ } /* Method(_SB.INTC._CRS) */
+
+ Method(_SRS, 1) {
+ /* DBGO("\\_SB\\LNKC\\_CRS\n") */
+ CreateWordField(ARG0, 1, IRQM)
+
+ /* Use lowest available IRQ */
+ FindSetRightBit(IRQM, Local0)
+ if (Local0) {
+ Decrement(Local0)
+ }
+ Store(Local0, PINC)
+ } /* End Method(_SB.INTC._SRS) */
+ } /* End Device(INTC) */
+
+ Device(INTD) {
+ Name(_HID, EISAID("PNP0C0F"))
+ Name(_UID, 4)
+
+ Method(_STA, 0) {
+ if (PIND) {
+ Return(0x0B) /* sata is invisible */
+ } else {
+ Return(0x09) /* sata is disabled */
+ }
+ } /* End Method(_SB.INTD._STA) */
+
+ Method(_DIS ,0) {
+ /* DBGO("\\_SB\\LNKD\\_DIS\n") */
+ Store(0, PIND)
+ } /* End Method(_SB.INTD._DIS) */
+
+ Method(_PRS ,0) {
+ /* DBGO("\\_SB\\LNKD\\_PRS\n") */
+ Return(IRQP)
+ } /* Method(_SB.INTD._PRS) */
+
+ Method(_CRS ,0) {
+ /* DBGO("\\_SB\\LNKD\\_CRS\n") */
+ CreateWordField(IRQB, 0x1, IRQN)
+ ShiftLeft(1, PIND, IRQN)
+ Return(IRQB)
+ } /* Method(_SB.INTD._CRS) */
+
+ Method(_SRS, 1) {
+ /* DBGO("\\_SB\\LNKD\\_CRS\n") */
+ CreateWordField(ARG0, 1, IRQM)
+
+ /* Use lowest available IRQ */
+ FindSetRightBit(IRQM, Local0)
+ if (Local0) {
+ Decrement(Local0)
+ }
+ Store(Local0, PIND)
+ } /* End Method(_SB.INTD._SRS) */
+ } /* End Device(INTD) */
+
+ Device(INTE) {
+ Name(_HID, EISAID("PNP0C0F"))
+ Name(_UID, 5)
+
+ Method(_STA, 0) {
+ if (PINE) {
+ Return(0x0B) /* sata is invisible */
+ } else {
+ Return(0x09) /* sata is disabled */
+ }
+ } /* End Method(_SB.INTE._STA) */
+
+ Method(_DIS ,0) {
+ /* DBGO("\\_SB\\LNKE\\_DIS\n") */
+ Store(0, PINE)
+ } /* End Method(_SB.INTE._DIS) */
+
+ Method(_PRS ,0) {
+ /* DBGO("\\_SB\\LNKE\\_PRS\n") */
+ Return(IRQP)
+ } /* Method(_SB.INTE._PRS) */
+
+ Method(_CRS ,0) {
+ /* DBGO("\\_SB\\LNKE\\_CRS\n") */
+ CreateWordField(IRQB, 0x1, IRQN)
+ ShiftLeft(1, PINE, IRQN)
+ Return(IRQB)
+ } /* Method(_SB.INTE._CRS) */
+
+ Method(_SRS, 1) {
+ /* DBGO("\\_SB\\LNKE\\_CRS\n") */
+ CreateWordField(ARG0, 1, IRQM)
+
+ /* Use lowest available IRQ */
+ FindSetRightBit(IRQM, Local0)
+ if (Local0) {
+ Decrement(Local0)
+ }
+ Store(Local0, PINE)
+ } /* End Method(_SB.INTE._SRS) */
+ } /* End Device(INTE) */
+
+ Device(INTF) {
+ Name(_HID, EISAID("PNP0C0F"))
+ Name(_UID, 6)
+
+ Method(_STA, 0) {
+ if (PINF) {
+ Return(0x0B) /* sata is invisible */
+ } else {
+ Return(0x09) /* sata is disabled */
+ }
+ } /* End Method(_SB.INTF._STA) */
+
+ Method(_DIS ,0) {
+ /* DBGO("\\_SB\\LNKF\\_DIS\n") */
+ Store(0, PINF)
+ } /* End Method(_SB.INTF._DIS) */
+
+ Method(_PRS ,0) {
+ /* DBGO("\\_SB\\LNKF\\_PRS\n") */
+ Return(PITF)
+ } /* Method(_SB.INTF._PRS) */
+
+ Method(_CRS ,0) {
+ /* DBGO("\\_SB\\LNKF\\_CRS\n") */
+ CreateWordField(IRQB, 0x1, IRQN)
+ ShiftLeft(1, PINF, IRQN)
+ Return(IRQB)
+ } /* Method(_SB.INTF._CRS) */
+
+ Method(_SRS, 1) {
+ /* DBGO("\\_SB\\LNKF\\_CRS\n") */
+ CreateWordField(ARG0, 1, IRQM)
+
+ /* Use lowest available IRQ */
+ FindSetRightBit(IRQM, Local0)
+ if (Local0) {
+ Decrement(Local0)
+ }
+ Store(Local0, PINF)
+ } /* End Method(_SB.INTF._SRS) */
+ } /* End Device(INTF) */
+
+ Device(INTG) {
+ Name(_HID, EISAID("PNP0C0F"))
+ Name(_UID, 7)
+
+ Method(_STA, 0) {
+ if (PING) {
+ Return(0x0B) /* sata is invisible */
+ } else {
+ Return(0x09) /* sata is disabled */
+ }
+ } /* End Method(_SB.INTG._STA) */
+
+ Method(_DIS ,0) {
+ /* DBGO("\\_SB\\LNKG\\_DIS\n") */
+ Store(0, PING)
+ } /* End Method(_SB.INTG._DIS) */
+
+ Method(_PRS ,0) {
+ /* DBGO("\\_SB\\LNKG\\_PRS\n") */
+ Return(IRQP)
+ } /* Method(_SB.INTG._CRS) */
+
+ Method(_CRS ,0) {
+ /* DBGO("\\_SB\\LNKG\\_CRS\n") */
+ CreateWordField(IRQB, 0x1, IRQN)
+ ShiftLeft(1, PING, IRQN)
+ Return(IRQB)
+ } /* Method(_SB.INTG._CRS) */
+
+ Method(_SRS, 1) {
+ /* DBGO("\\_SB\\LNKG\\_CRS\n") */
+ CreateWordField(ARG0, 1, IRQM)
+
+ /* Use lowest available IRQ */
+ FindSetRightBit(IRQM, Local0)
+ if (Local0) {
+ Decrement(Local0)
+ }
+ Store(Local0, PING)
+ } /* End Method(_SB.INTG._SRS) */
+ } /* End Device(INTG) */
+
+ Device(INTH) {
+ Name(_HID, EISAID("PNP0C0F"))
+ Name(_UID, 8)
+
+ Method(_STA, 0) {
+ if (PINH) {
+ Return(0x0B) /* sata is invisible */
+ } else {
+ Return(0x09) /* sata is disabled */
+ }
+ } /* End Method(_SB.INTH._STA) */
+
+ Method(_DIS ,0) {
+ /* DBGO("\\_SB\\LNKH\\_DIS\n") */
+ Store(0, PINH)
+ } /* End Method(_SB.INTH._DIS) */
+
+ Method(_PRS ,0) {
+ /* DBGO("\\_SB\\LNKH\\_PRS\n") */
+ Return(IRQP)
+ } /* Method(_SB.INTH._CRS) */
+
+ Method(_CRS ,0) {
+ /* DBGO("\\_SB\\LNKH\\_CRS\n") */
+ CreateWordField(IRQB, 0x1, IRQN)
+ ShiftLeft(1, PINH, IRQN)
+ Return(IRQB)
+ } /* Method(_SB.INTH._CRS) */
+
+ Method(_SRS, 1) {
+ /* DBGO("\\_SB\\LNKH\\_CRS\n") */
+ CreateWordField(ARG0, 1, IRQM)
+
+ /* Use lowest available IRQ */
+ FindSetRightBit(IRQM, Local0)
+ if (Local0) {
+ Decrement(Local0)
+ }
+ Store(Local0, PINH)
+ } /* End Method(_SB.INTH._SRS) */
+ } /* End Device(INTH) */
+
+ } /* End Scope(_SB) */
+
+
+ /* Supported sleep states: */
+ Name(\_S0, Package () {0x00, 0x00, 0x00, 0x00} ) /* (S0) - working state */
+
+ If (LAnd(SSFG, 0x01)) {
+ Name(\_S1, Package () {0x01, 0x01, 0x00, 0x00} ) /* (S1) - sleeping w/CPU context */
+ }
+ If (LAnd(SSFG, 0x02)) {
+ Name(\_S2, Package () {0x02, 0x02, 0x00, 0x00} ) /* (S2) - "light" Suspend to RAM */
+ }
+ If (LAnd(SSFG, 0x04)) {
+ Name(\_S3, Package () {0x03, 0x03, 0x00, 0x00} ) /* (S3) - Suspend to RAM */
+ }
+ If (LAnd(SSFG, 0x08)) {
+ Name(\_S4, Package () {0x04, 0x04, 0x00, 0x00} ) /* (S4) - Suspend to Disk */
+ }
+
+ Name(\_S5, Package () {0x05, 0x05, 0x00, 0x00} ) /* (S5) - Soft Off */
+
+ Name(\_SB.CSPS ,0) /* Current Sleep State (S0, S1, S2, S3, S4, S5) */
+ Name(CSMS, 0) /* Current System State */
+
+ /* Wake status package */
+ Name(WKST,Package(){Zero, Zero})
+
+ /*
+ * \_PTS - Prepare to Sleep method
+ *
+ * Entry:
+ * Arg0=The value of the sleeping state S1=1, S2=2, etc
+ *
+ * Exit:
+ * -none-
+ *
+ * The _PTS control method is executed at the beginning of the sleep process
+ * for S1-S5. The sleeping value is passed to the _PTS control method. This
+ * control method may be executed a relatively long time before entering the
+ * sleep state and the OS may abort the operation without notification to
+ * the ACPI driver. This method cannot modify the configuration or power
+ * state of any device in the system.
+ */
+ Method(\_PTS, 1) {
+ /* DBGO("\\_PTS\n") */
+ /* DBGO("From S0 to S") */
+ /* DBGO(Arg0) */
+ /* DBGO("\n") */
+
+ /* Don't allow PCIRST# to reset USB */
+ if (LEqual(Arg0,3)){
+ Store(0,URRE)
+ }
+
+ /* Clear sleep SMI status flag and enable sleep SMI trap. */
+ /*Store(One, CSSM)
+ Store(One, SSEN)*/
+
+ /* On older chips, clear PciExpWakeDisEn */
+ /*if (LLessEqual(\_SB.SBRI, 0x13)) {
+ * Store(0,\_SB.PWDE)
+ *}
+ */
+
+ /* Clear wake status structure. */
+ Store(0, Index(WKST,0))
+ Store(0, Index(WKST,1))
+ \_SB.PCI0.SIOS (Arg0)
+ } /* End Method(\_PTS) */
+
+ /*
+ * The following method results in a "not a valid reserved NameSeg"
+ * warning so I have commented it out for the duration. It isn't
+ * used, so it could be removed.
+ *
+ *
+ * \_GTS OEM Going To Sleep method
+ *
+ * Entry:
+ * Arg0=The value of the sleeping state S1=1, S2=2
+ *
+ * Exit:
+ * -none-
+ *
+ * Method(\_GTS, 1) {
+ * DBGO("\\_GTS\n")
+ * DBGO("From S0 to S")
+ * DBGO(Arg0)
+ * DBGO("\n")
+ * }
+ */
+
+ /*
+ * \_BFS OEM Back From Sleep method
+ *
+ * Entry:
+ * Arg0=The value of the sleeping state S1=1, S2=2
+ *
+ * Exit:
+ * -none-
+ */
+ Method(\_BFS, 1) {
+ /* DBGO("\\_BFS\n") */
+ /* DBGO("From S") */
+ /* DBGO(Arg0) */
+ /* DBGO(" to S0\n") */
+ }
+
+ /*
+ * \_WAK System Wake method
+ *
+ * Entry:
+ * Arg0=The value of the sleeping state S1=1, S2=2
+ *
+ * Exit:
+ * Return package of 2 DWords
+ * Dword 1 - Status
+ * 0x00000000 wake succeeded
+ * 0x00000001 Wake was signaled but failed due to lack of power
+ * 0x00000002 Wake was signaled but failed due to thermal condition
+ * Dword 2 - Power Supply state
+ * if non-zero the effective S-state the power supply entered
+ */
+ Method(\_WAK, 1) {
+ /* DBGO("\\_WAK\n") */
+ /* DBGO("From S") */
+ /* DBGO(Arg0) */
+ /* DBGO(" to S0\n") */
+
+ /* Re-enable HPET */
+ Store(1,HPDE)
+
+ /* Restore PCIRST# so it resets USB */
+ if (LEqual(Arg0,3)){
+ Store(1,URRE)
+ }
+
+ /* Arbitrarily clear PciExpWakeStatus */
+ Store(PWST, PWST)
+
+ /* if(DeRefOf(Index(WKST,0))) {
+ * Store(0, Index(WKST,1))
+ * } else {
+ * Store(Arg0, Index(WKST,1))
+ * }
+ */
+ \_SB.PCI0.SIOW (Arg0)
+ Return(WKST)
+ } /* End Method(\_WAK) */
+
+ Scope(\_GPE) { /* Start Scope GPE */
+ /* General event 0 */
+ /* Method(_L00) {
+ * DBGO("\\_GPE\\_L00\n")
+ * }
+ */
+
+ /* General event 1 */
+ /* Method(_L01) {
+ * DBGO("\\_GPE\\_L00\n")
+ * }
+ */
+
+ /* General event 2 */
+ /* Method(_L02) {
+ * DBGO("\\_GPE\\_L00\n")
+ * }
+ */
+
+ /* General event 3 */
+ Method(_L03) {
+ /* DBGO("\\_GPE\\_L00\n") */
+ Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+ }
+
+ /* General event 4 */
+ /* Method(_L04) {
+ * DBGO("\\_GPE\\_L00\n")
+ * }
+ */
+
+ /* General event 5 */
+ /* Method(_L05) {
+ * DBGO("\\_GPE\\_L00\n")
+ * }
+ */
+
+ /* General event 6 - Used for GPM6, moved to USB.asl */
+ /* Method(_L06) {
+ * DBGO("\\_GPE\\_L00\n")
+ * }
+ */
+
+ /* General event 7 - Used for GPM7, moved to USB.asl */
+ /* Method(_L07) {
+ * DBGO("\\_GPE\\_L07\n")
+ * }
+ */
+
+ /* Legacy PM event */
+ Method(_L08) {
+ /* DBGO("\\_GPE\\_L08\n") */
+ }
+
+ /* Temp warning (TWarn) event */
+ Method(_L09) {
+ /* DBGO("\\_GPE\\_L09\n") */
+ Notify (\_TZ.TZ00, 0x80)
+ }
+
+ /* Reserved */
+ /* Method(_L0A) {
+ * DBGO("\\_GPE\\_L0A\n")
+ * }
+ */
+
+ /* USB controller PME# */
+ Method(_L0B) {
+ /* DBGO("\\_GPE\\_L0B\n") */
+ Notify(\_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+ }
+
+ /* AC97 controller PME# */
+ /* Method(_L0C) {
+ * DBGO("\\_GPE\\_L0C\n")
+ * }
+ */
+
+ /* OtherTherm PME# */
+ /* Method(_L0D) {
+ * DBGO("\\_GPE\\_L0D\n")
+ * }
+ */
+
+ /* GPM9 SCI event - Moved to USB.asl */
+ /* Method(_L0E) {
+ * DBGO("\\_GPE\\_L0E\n")
+ * }
+ */
+
+ /* PCIe HotPlug event */
+ /* Method(_L0F) {
+ * DBGO("\\_GPE\\_L0F\n")
+ * }
+ */
+
+ /* ExtEvent0 SCI event */
+ Method(_L10) {
+ /* DBGO("\\_GPE\\_L10\n") */
+ }
+
+
+ /* ExtEvent1 SCI event */
+ Method(_L11) {
+ /* DBGO("\\_GPE\\_L11\n") */
+ }
+
+ /* PCIe PME# event */
+ /* Method(_L12) {
+ * DBGO("\\_GPE\\_L12\n")
+ * }
+ */
+
+ /* GPM0 SCI event - Moved to USB.asl */
+ /* Method(_L13) {
+ * DBGO("\\_GPE\\_L13\n")
+ * }
+ */
+
+ /* GPM1 SCI event - Moved to USB.asl */
+ /* Method(_L14) {
+ * DBGO("\\_GPE\\_L14\n")
+ * }
+ */
+
+ /* GPM2 SCI event - Moved to USB.asl */
+ /* Method(_L15) {
+ * DBGO("\\_GPE\\_L15\n")
+ * }
+ */
+
+ /* GPM3 SCI event - Moved to USB.asl */
+ /* Method(_L16) {
+ * DBGO("\\_GPE\\_L16\n")
+ * }
+ */
+
+ /* GPM8 SCI event - Moved to USB.asl */
+ /* Method(_L17) {
+ * DBGO("\\_GPE\\_L17\n")
+ * }
+ */
+
+ /* GPIO0 or GEvent8 event */
+ Method(_L18) {
+ /* DBGO("\\_GPE\\_L18\n") */
+ Notify(\_SB.PCI0.PBR2, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+ }
+
+ /* GPM4 SCI event - Moved to USB.asl */
+ /* Method(_L19) {
+ * DBGO("\\_GPE\\_L19\n")
+ * }
+ */
+
+ /* GPM5 SCI event - Moved to USB.asl */
+ /* Method(_L1A) {
+ * DBGO("\\_GPE\\_L1A\n")
+ * }
+ */
+
+ /* Azalia SCI event */
+ Method(_L1B) {
+ /* DBGO("\\_GPE\\_L1B\n") */
+ Notify(\_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+ }
+
+ /* GPM6 SCI event - Reassigned to _L06 */
+ /* Method(_L1C) {
+ * DBGO("\\_GPE\\_L1C\n")
+ * }
+ */
+
+ /* GPM7 SCI event - Reassigned to _L07 */
+ /* Method(_L1D) {
+ * DBGO("\\_GPE\\_L1D\n")
+ * }
+ */
+
+ /* GPIO2 or GPIO66 SCI event */
+ /* Method(_L1E) {
+ * DBGO("\\_GPE\\_L1E\n")
+ * }
+ */
+
+ /* SATA SCI event - Moved to sata.asl */
+ /* Method(_L1F) {
+ * DBGO("\\_GPE\\_L1F\n")
+ * }
+ */
+
+ } /* End Scope GPE */
+
+ #include "acpi/usb.asl"
+
+ /* South Bridge */
+ Scope(\_SB) { /* Start \_SB scope */
+ #include "acpi/globutil.asl" /* global utility methods expected within the \_SB scope */
+
+ /* _SB.PCI0 */
+ /* Note: Only need HID on Primary Bus */
+ Device(PCI0) {
+ External (TOM1)
+ External (TOM2)
+ Name(_HID, EISAID("PNP0A03"))
+ Name(_ADR, 0x00180000) /* Dev# = BSP Dev#, Func# = 0 */
+ Method(_BBN, 0) { /* Bus number = 0 */
+ Return(0)
+ }
+ Method(_STA, 0) {
+ /* DBGO("\\_SB\\PCI0\\_STA\n") */
+ Return(0x0B) /* Status is visible */
+ }
+
+ Method(_PRT,0) {
+ If(PMOD){ Return(APR0) } /* APIC mode */
+ Return (PR0) /* PIC Mode */
+ } /* end _PRT */
+
+ /* Describe the Northbridge devices */
+ Device(AMRT) {
+ Name(_ADR, 0x00000000)
+ } /* end AMRT */
+
+ /* The internal GFX bridge */
+ Device(AGPB) {
+ Name(_ADR, 0x00010000)
+ Name(_PRW, Package() {0x18, 4})
+ Method(_PRT,0) {
+ Return (APR1)
+ }
+ } /* end AGPB */
+
+ /* The external GFX bridge */
+ Device(PBR2) {
+ Name(_ADR, 0x00020000)
+ Name(_PRW, Package() {0x18, 4})
+ Method(_PRT,0) {
+ If(PMOD){ Return(APS2) } /* APIC mode */
+ Return (PS2) /* PIC Mode */
+ } /* end _PRT */
+ } /* end PBR2 */
+
+ /* Dev3 is also an external GFX bridge, not used in Herring */
+
+ Device(PBR4) {
+ Name(_ADR, 0x00040000)
+ Name(_PRW, Package() {0x18, 4})
+ Method(_PRT,0) {
+ If(PMOD){ Return(APS4) } /* APIC mode */
+ Return (PS4) /* PIC Mode */
+ } /* end _PRT */
+ } /* end PBR4 */
+
+ Device(PBR5) {
+ Name(_ADR, 0x00050000)
+ Name(_PRW, Package() {0x18, 4})
+ Method(_PRT,0) {
+ If(PMOD){ Return(APS5) } /* APIC mode */
+ Return (PS5) /* PIC Mode */
+ } /* end _PRT */
+ } /* end PBR5 */
+
+ Device(PBR6) {
+ Name(_ADR, 0x00060000)
+ Name(_PRW, Package() {0x18, 4})
+ Method(_PRT,0) {
+ If(PMOD){ Return(APS6) } /* APIC mode */
+ Return (PS6) /* PIC Mode */
+ } /* end _PRT */
+ } /* end PBR6 */
+
+ /* The onboard EtherNet chip */
+ Device(PBR7) {
+ Name(_ADR, 0x00070000)
+ Name(_PRW, Package() {0x18, 4})
+ Method(_PRT,0) {
+ If(PMOD){ Return(APS7) } /* APIC mode */
+ Return (PS7) /* PIC Mode */
+ } /* end _PRT */
+ } /* end PBR7 */
+
+ /* GPP */
+ Device(PBR9) {
+ Name(_ADR, 0x00090000)
+ Name(_PRW, Package() {0x18, 4})
+ Method(_PRT,0) {
+ If(PMOD){ Return(APS9) } /* APIC mode */
+ Return (PS9) /* PIC Mode */
+ } /* end _PRT */
+ } /* end PBR9 */
+
+ Device(PBRa) {
+ Name(_ADR, 0x000A0000)
+ Name(_PRW, Package() {0x18, 4})
+ Method(_PRT,0) {
+ If(PMOD){ Return(APSa) } /* APIC mode */
+ Return (PSa) /* PIC Mode */
+ } /* end _PRT */
+ } /* end PBRa */
+
+
+ /* PCI slot 1, 2, 3 */
+ Device(PIBR) {
+ Name(_ADR, 0x00140004)
+ Name(_PRW, Package() {0x18, 4})
+
+ Method(_PRT, 0) {
+ Return (PCIB)
+ }
+ }
+
+ /* Describe the Southbridge devices */
+ Device(STCR) {
+ Name(_ADR, 0x00110000)
+ #include "acpi/sata.asl"
+ } /* end STCR */
+
+ Device(UOH1) {
+ Name(_ADR, 0x00130000)
+ Name(_PRW, Package() {0x0B, 3})
+ } /* end UOH1 */
+
+ Device(UOH2) {
+ Name(_ADR, 0x00130001)
+ Name(_PRW, Package() {0x0B, 3})
+ } /* end UOH2 */
+
+ Device(UOH3) {
+ Name(_ADR, 0x00130002)
+ Name(_PRW, Package() {0x0B, 3})
+ } /* end UOH3 */
+
+ Device(UOH4) {
+ Name(_ADR, 0x00130003)
+ Name(_PRW, Package() {0x0B, 3})
+ } /* end UOH4 */
+
+ Device(UOH5) {
+ Name(_ADR, 0x00130004)
+ Name(_PRW, Package() {0x0B, 3})
+ } /* end UOH5 */
+
+ Device(UEH1) {
+ Name(_ADR, 0x00130005)
+ Name(_PRW, Package() {0x0B, 3})
+ } /* end UEH1 */
+
+ Device(SBUS) {
+ Name(_ADR, 0x00140000)
+ } /* end SBUS */
+
+ /* Primary (and only) IDE channel */
+ Device(IDEC) {
+ Name(_ADR, 0x00140001)
+ #include "acpi/ide.asl"
+ } /* end IDEC */
+
+ Device(AZHD) {
+ Name(_ADR, 0x00140002)
+ OperationRegion(AZPD, PCI_Config, 0x00, 0x100)
+ Field(AZPD, AnyAcc, NoLock, Preserve) {
+ offset (0x42),
+ NSDI, 1,
+ NSDO, 1,
+ NSEN, 1,
+ offset (0x44),
+ IPCR, 4,
+ offset (0x54),
+ PWST, 2,
+ , 6,
+ PMEB, 1,
+ , 6,
+ PMST, 1,
+ offset (0x62),
+ MMCR, 1,
+ offset (0x64),
+ MMLA, 32,
+ offset (0x68),
+ MMHA, 32,
+ offset (0x6C),
+ MMDT, 16,
+ }
+
+ Method(_INI) {
+ If(LEqual(OSTP,3)){ /* If we are running Linux */
+ Store(zero, NSEN)
+ Store(one, NSDO)
+ Store(one, NSDI)
+ }
+ }
+ } /* end AZHD */
+
+ Device(LIBR) {
+ Name(_ADR, 0x00140003)
+ /* Method(_INI) {
+ * DBGO("\\_SB\\PCI0\\LpcIsaBr\\_INI\n")
+ } */ /* End Method(_SB.SBRDG._INI) */
+
+ /* Real Time Clock Device */
+ Device(RTC0) {
+ Name(_HID, EISAID("PNP0B01")) /* AT Real Time Clock */
+ Name(_CRS, ResourceTemplate() {
+ IRQNoFlags(){8}
+ IO(Decode16,0x0070, 0x0070, 0, 2)
+ /* IO(Decode16,0x0070, 0x0070, 0, 4) */
+ })
+ } /* End Device(_SB.PCI0.LpcIsaBr.RTC0) */
+
+ Device(TMR) { /* Timer */
+ Name(_HID,EISAID("PNP0100")) /* System Timer */
+ Name(_CRS, ResourceTemplate() {
+ IRQNoFlags(){0}
+ IO(Decode16, 0x0040, 0x0040, 0, 4)
+ /* IO(Decode16, 0x0048, 0x0048, 0, 4) */
+ })
+ } /* End Device(_SB.PCI0.LpcIsaBr.TMR) */
+
+ Device(SPKR) { /* Speaker */
+ Name(_HID,EISAID("PNP0800")) /* AT style speaker */
+ Name(_CRS, ResourceTemplate() {
+ IO(Decode16, 0x0061, 0x0061, 0, 1)
+ })
+ } /* End Device(_SB.PCI0.LpcIsaBr.SPKR) */
+
+ Device(PIC) {
+ Name(_HID,EISAID("PNP0000")) /* AT Interrupt Controller */
+ Name(_CRS, ResourceTemplate() {
+ IRQNoFlags(){2}
+ IO(Decode16,0x0020, 0x0020, 0, 2)
+ IO(Decode16,0x00A0, 0x00A0, 0, 2)
+ /* IO(Decode16, 0x00D0, 0x00D0, 0x10, 0x02) */
+ /* IO(Decode16, 0x04D0, 0x04D0, 0x10, 0x02) */
+ })
+ } /* End Device(_SB.PCI0.LpcIsaBr.PIC) */
+
+ Device(MAD) { /* 8257 DMA */
+ Name(_HID,EISAID("PNP0200")) /* Hardware Device ID */
+ Name(_CRS, ResourceTemplate() {
+ DMA(Compatibility,BusMaster,Transfer8){4}
+ IO(Decode16, 0x0000, 0x0000, 0x10, 0x10)
+ IO(Decode16, 0x0081, 0x0081, 0x10, 0x03)
+ IO(Decode16, 0x0087, 0x0087, 0x10, 0x01)
+ IO(Decode16, 0x0089, 0x0089, 0x10, 0x03)
+ IO(Decode16, 0x008F, 0x008F, 0x10, 0x01)
+ IO(Decode16, 0x00C0, 0x00C0, 0x10, 0x20)
+ }) /* End Name(_SB.PCI0.LpcIsaBr.MAD._CRS) */
+ } /* End Device(_SB.PCI0.LpcIsaBr.MAD) */
+
+ Device(COPR) {
+ Name(_HID,EISAID("PNP0C04")) /* Math Coprocessor */
+ Name(_CRS, ResourceTemplate() {
+ IO(Decode16, 0x00F0, 0x00F0, 0, 0x10)
+ IRQNoFlags(){13}
+ })
+ } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */
+
+ Device(HPTM) {
+ Name(_HID,EISAID("PNP0103"))
+ Name(CRS,ResourceTemplate() {
+ Memory32Fixed(ReadOnly,0xFED00000, 0x00000400, HPT) /* 1kb reserved space */
+ })
+ Method(_STA, 0) {
+ Return(0x0F) /* sata is visible */
+ }
+ Method(_CRS, 0) {
+ CreateDwordField(CRS, ^HPT._BAS, HPBA)
+ Store(HPBA, HPBA)
+ Return(CRS)
+ }
+ } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */
+ } /* end LIBR */
+
+ Device(HPBR) {
+ Name(_ADR, 0x00140004)
+ } /* end HostPciBr */
+
+ Device(ACAD) {
+ Name(_ADR, 0x00140005)
+ } /* end Ac97audio */
+
+ Device(ACMD) {
+ Name(_ADR, 0x00140006)
+ } /* end Ac97modem */
+
+ /* ITE8718 Support */
+ OperationRegion (IOID, SystemIO, 0x2E, 0x02) /* sometimes it is 0x4E */
+ Field (IOID, ByteAcc, NoLock, Preserve)
+ {
+ SIOI, 8, SIOD, 8 /* 0x2E and 0x2F */
+ }
+
+ IndexField (SIOI, SIOD, ByteAcc, NoLock, Preserve)
+ {
+ Offset (0x07),
+ LDN, 8, /* Logical Device Number */
+ Offset (0x20),
+ CID1, 8, /* Chip ID Byte 1, 0x87 */
+ CID2, 8, /* Chip ID Byte 2, 0x12 */
+ Offset (0x30),
+ ACTR, 8, /* Function activate */
+ Offset (0xF0),
+ APC0, 8, /* APC/PME Event Enable Register */
+ APC1, 8, /* APC/PME Status Register */
+ APC2, 8, /* APC/PME Control Register 1 */
+ APC3, 8, /* Environment Controller Special Configuration Register */
+ APC4, 8 /* APC/PME Control Register 2 */
+ }
+
+ /* Enter the 8718 MB PnP Mode */
+ Method (EPNP)
+ {
+ Store(0x87, SIOI)
+ Store(0x01, SIOI)
+ Store(0x55, SIOI)
+ Store(0x55, SIOI) /* 8718 magic number */
+ }
+ /* Exit the 8718 MB PnP Mode */
+ Method (XPNP)
+ {
+ Store (0x02, SIOI)
+ Store (0x02, SIOD)
+ }
+ /*
+ * Keyboard PME is routed to SB600 Gevent3. We can wake
+ * up the system by pressing the key.
+ */
+ Method (SIOS, 1)
+ {
+ /* We only enable KBD PME for S5. */
+ If (LLess (Arg0, 0x05))
+ {
+ EPNP()
+ /* DBGO("8718F\n") */
+
+ Store (0x4, LDN)
+ Store (One, ACTR) /* Enable EC */
+ /*
+ Store (0x4, LDN)
+ Store (0x04, APC4)
+ */ /* falling edge. which mode? Not sure. */
+
+ Store (0x4, LDN)
+ Store (0x08, APC1) /* clear PME status, Use 0x18 for mouse & KBD */
+ Store (0x4, LDN)
+ Store (0x08, APC0) /* enable PME, Use 0x18 for mouse & KBD */
+
+ XPNP()
+ }
+ }
+ Method (SIOW, 1)
+ {
+ EPNP()
+ Store (0x4, LDN)
+ Store (Zero, APC0) /* disable keyboard PME */
+ Store (0x4, LDN)
+ Store (0xFF, APC1) /* clear keyboard PME status */
+ XPNP()
+ }
+
+ Name(CRES, ResourceTemplate() {
+ IO(Decode16, 0x0CF8, 0x0CF8, 1, 8)
+
+ WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
+ 0x0000, /* address granularity */
+ 0x0000, /* range minimum */
+ 0x0CF7, /* range maximum */
+ 0x0000, /* translation */
+ 0x0CF8 /* length */
+ )
+
+ WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
+ 0x0000, /* address granularity */
+ 0x0D00, /* range minimum */
+ 0xFFFF, /* range maximum */
+ 0x0000, /* translation */
+ 0xF300 /* length */
+ )
+
+ Memory32Fixed(READWRITE, 0, 0xA0000, BSMM)
+ Memory32Fixed(READONLY, 0x000A0000, 0x00020000, VGAM) /* VGA memory space */
+ Memory32Fixed(READONLY, 0x000C0000, 0x00020000, EMM1) /* Assume C0000-E0000 empty */
+ Memory32Fixed(READONLY, 0x000E0000, 0x00020000, RDBS) /* BIOS ROM area */
+
+ /* DRAM Memory from 1MB to TopMem */
+ Memory32Fixed(READWRITE, 0x00100000, 0, DMLO) /* 1MB to TopMem */
+
+ /* BIOS space just below 4GB */
+ DWORDMemory(
+ ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite,
+ 0x00, /* Granularity */
+ 0x00000000, /* Min */
+ 0x00000000, /* Max */
+ 0x00000000, /* Translation */
+ 0x00000000, /* Max-Min, RLEN */
+ ,,
+ PCBM
+ )
+
+ /* DRAM memory from 4GB to TopMem2 */
+ QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite,
+ 0xFFFFFFFF, /* Granularity */
+ 0x00000000, /* Min */
+ 0x00000000, /* Max */
+ 0x00000000, /* Translation */
+ 0x00000000, /* Max-Min, RLEN */
+ ,,
+ DMHI
+ )
+
+ /* BIOS space just below 16EB */
+ QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite,
+ 0xFFFFFFFF, /* Granularity */
+ 0x00000000, /* Min */
+ 0x00000000, /* Max */
+ 0x00000000, /* Translation */
+ 0x00000000, /* Max-Min, RLEN */
+ ,,
+ PEBM
+ )
+
+ }) /* End Name(_SB.PCI0.CRES) */
+
+ Method(_CRS, 0) {
+ /* DBGO("\\_SB\\PCI0\\_CRS\n") */
+
+ CreateDWordField(CRES, ^EMM1._BAS, EM1B)
+ CreateDWordField(CRES, ^EMM1._LEN, EM1L)
+ CreateDWordField(CRES, ^DMLO._BAS, DMLB)
+ CreateDWordField(CRES, ^DMLO._LEN, DMLL)
+ CreateDWordField(CRES, ^PCBM._MIN, PBMB)
+ CreateDWordField(CRES, ^PCBM._LEN, PBML)
+
+ CreateQWordField(CRES, ^DMHI._MIN, DMHB)
+ CreateQWordField(CRES, ^DMHI._LEN, DMHL)
+ CreateQWordField(CRES, ^PEBM._MIN, EBMB)
+ CreateQWordField(CRES, ^PEBM._LEN, EBML)
+
+ If(LGreater(LOMH, 0xC0000)){
+ Store(0xC0000, EM1B) /* Hole above C0000 and below E0000 */
+ Subtract(LOMH, 0xC0000, EM1L) /* subtract start, assumes allocation from C0000 going up */
+ }
+
+ /* Set size of memory from 1MB to TopMem */
+ Subtract(TOM1, 0x100000, DMLL)
+
+ /*
+ * If(LNotEqual(TOM2, 0x00000000)){
+ * Store(0x100000000,DMHB) DRAM from 4GB to TopMem2
+ * Subtract(TOM2, 0x100000000, DMHL)
+ * }
+ */
+
+ /* If there is no memory above 4GB, put the BIOS just below 4GB */
+ If(LEqual(TOM2, 0x00000000)){
+ Store(PBAD,PBMB) /* Reserve the "BIOS" space */
+ Store(PBLN,PBML)
+ }
+ Else { /* Otherwise, put the BIOS just below 16EB */
+ ShiftLeft(PBAD,16,EBMB) /* Reserve the "BIOS" space */
+ Store(PBLN,EBML)
+ }
+
+ Return(CRES) /* note to change the Name buffer */
+ } /* end of Method(_SB.PCI0._CRS) */
+
+ /*
+ *
+ * FIRST METHOD CALLED UPON BOOT
+ *
+ * 1. If debugging, print current OS and ACPI interpreter.
+ * 2. Get PCI Interrupt routing from ACPI VSM, this
+ * value is based on user choice in BIOS setup.
+ */
+ Method(_INI, 0) {
+ /* DBGO("\\_SB\\_INI\n") */
+ /* DBGO(" DSDT.ASL code from ") */
+ /* DBGO(__DATE__) */
+ /* DBGO(" ") */
+ /* DBGO(__TIME__) */
+ /* DBGO("\n Sleep states supported: ") */
+ /* DBGO("\n") */
+ /* DBGO(" \\_OS=") */
+ /* DBGO(\_OS) */
+ /* DBGO("\n \\_REV=") */
+ /* DBGO(\_REV) */
+ /* DBGO("\n") */
+
+ /* Determine the OS we're running on */
+ CkOT()
+
+ /* On older chips, clear PciExpWakeDisEn */
+ /*if (LLessEqual(\SBRI, 0x13)) {
+ * Store(0,\PWDE)
+ * }
+ */
+ } /* End Method(_SB._INI) */
+ } /* End Device(PCI0) */
+
+ Device(PWRB) { /* Start Power button device */
+ Name(_HID, EISAID("PNP0C0C"))
+ Name(_UID, 0xAA)
+ Name(_PRW, Package () {3, 0x04}) /* wake from S1-S4 */
+ Name(_STA, 0x0B) /* sata is invisible */
+ }
+ } /* End \_SB scope */
+
+ Scope(\_SI) {
+ Method(_SST, 1) {
+ /* DBGO("\\_SI\\_SST\n") */
+ /* DBGO(" New Indicator state: ") */
+ /* DBGO(Arg0) */
+ /* DBGO("\n") */
+ }
+ } /* End Scope SI */
+
+ /* SMBUS Support */
+ Mutex (SBX0, 0x00)
+ OperationRegion (SMB0, SystemIO, 0xB00, 0x0C)
+ Field (SMB0, ByteAcc, NoLock, Preserve) {
+ HSTS, 8, /* SMBUS status */
+ SSTS, 8, /* SMBUS slave status */
+ HCNT, 8, /* SMBUS control */
+ HCMD, 8, /* SMBUS host cmd */
+ HADD, 8, /* SMBUS address */
+ DAT0, 8, /* SMBUS data0 */
+ DAT1, 8, /* SMBUS data1 */
+ BLKD, 8, /* SMBUS block data */
+ SCNT, 8, /* SMBUS slave control */
+ SCMD, 8, /* SMBUS shaow cmd */
+ SEVT, 8, /* SMBUS slave event */
+ SDAT, 8 /* SMBUS slave data */
+ }
+
+ Method (WCLR, 0, NotSerialized) { /* clear SMBUS status register */
+ Store (0x1E, HSTS)
+ Store (0xFA, Local0)
+ While (LAnd (LNotEqual (And (HSTS, 0x1E), Zero), LGreater (Local0, Zero))) {
+ Stall (0x64)
+ Decrement (Local0)
+ }
+
+ Return (Local0)
+ }
+
+ Method (SWTC, 1, NotSerialized) {
+ Store (Arg0, Local0)
+ Store (0x07, Local2)
+ Store (One, Local1)
+ While (LEqual (Local1, One)) {
+ Store (And (HSTS, 0x1E), Local3)
+ If (LNotEqual (Local3, Zero)) { /* read sucess */
+ If (LEqual (Local3, 0x02)) {
+ Store (Zero, Local2)
+ }
+
+ Store (Zero, Local1)
+ }
+ Else {
+ If (LLess (Local0, 0x0A)) { /* read failure */
+ Store (0x10, Local2)
+ Store (Zero, Local1)
+ }
+ Else {
+ Sleep (0x0A) /* 10 ms, try again */
+ Subtract (Local0, 0x0A, Local0)
+ }
+ }
+ }
+
+ Return (Local2)
+ }
+
+ Method (SMBR, 3, NotSerialized) {
+ Store (0x07, Local0)
+ If (LEqual (Acquire (SBX0, 0xFFFF), Zero)) {
+ Store (WCLR (), Local0) /* clear SMBUS status register before read data */
+ If (LEqual (Local0, Zero)) {
+ Release (SBX0)
+ Return (0x0)
+ }
+
+ Store (0x1F, HSTS)
+ Store (Or (ShiftLeft (Arg1, One), One), HADD)
+ Store (Arg2, HCMD)
+ If (LEqual (Arg0, 0x07)) {
+ Store (0x48, HCNT) /* read byte */
+ }
+
+ Store (SWTC (0x03E8), Local1) /* 1000 ms */
+ If (LEqual (Local1, Zero)) {
+ If (LEqual (Arg0, 0x07)) {
+ Store (DAT0, Local0)
+ }
+ }
+ Else {
+ Store (Local1, Local0)
+ }
+
+ Release (SBX0)
+ }
+
+ /* DBGO("the value of SMBusData0 register ") */
+ /* DBGO(Arg2) */
+ /* DBGO(" is ") */
+ /* DBGO(Local0) */
+ /* DBGO("\n") */
+
+ Return (Local0)
+ }
+
+ /* THERMAL */
+ Scope(\_TZ) {
+ Name (KELV, 2732)
+ Name (THOT, 800)
+ Name (TCRT, 850)
+
+ ThermalZone(TZ00) {
+ Method(_AC0,0) { /* Active Cooling 0 (0=highest fan speed) */
+ /* DBGO("\\_TZ\\TZ00\\_AC0\n") */
+ Return(Add(0, 2730))
+ }
+ Method(_AL0,0) { /* Returns package of cooling device to turn on */
+ /* DBGO("\\_TZ\\TZ00\\_AL0\n") */
+ Return(Package() {\_TZ.TZ00.FAN0})
+ }
+ Device (FAN0) {
+ Name(_HID, EISAID("PNP0C0B"))
+ Name(_PR0, Package() {PFN0})
+ }
+
+ PowerResource(PFN0,0,0) {
+ Method(_STA) {
+ Store(0xF,Local0)
+ Return(Local0)
+ }
+ Method(_ON) {
+ /* DBGO("\\_TZ\\TZ00\\FAN0 _ON\n") */
+ }
+ Method(_OFF) {
+ /* DBGO("\\_TZ\\TZ00\\FAN0 _OFF\n") */
+ }
+ }
+
+ Method(_HOT,0) { /* return hot temp in tenths degree Kelvin */
+ /* DBGO("\\_TZ\\TZ00\\_HOT\n") */
+ Return (Add (THOT, KELV))
+ }
+ Method(_CRT,0) { /* return critical temp in tenths degree Kelvin */
+ /* DBGO("\\_TZ\\TZ00\\_CRT\n") */
+ Return (Add (TCRT, KELV))
+ }
+ Method(_TMP,0) { /* return current temp of this zone */
+ Store (SMBR (0x07, 0x4C,, 0x00), Local0)
+ If (LGreater (Local0, 0x10)) {
+ Store (Local0, Local1)
+ }
+ Else {
+ Add (Local0, THOT, Local0)
+ Return (Add (400, KELV))
+ }
+
+ Store (SMBR (0x07, 0x4C, 0x01), Local0)
+ /* only the two MSBs in the external temperature low byte are used, resolution 0.25. We ignore it */
+ /* Store (SMBR (0x07, 0x4C, 0x10), Local2) */
+ If (LGreater (Local0, 0x10)) {
+ If (LGreater (Local0, Local1)) {
+ Store (Local0, Local1)
+ }
+
+ Multiply (Local1, 10, Local1)
+ Return (Add (Local1, KELV))
+ }
+ Else {
+ Add (Local0, THOT, Local0)
+ Return (Add (400 , KELV))
+ }
+ } /* end of _TMP */
+ } /* end of TZ00 */
+ }
+}
+/* End of ASL file */
--- /dev/null
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/*
+ * ACPI - create the Fixed ACPI Description Tables (FADT)
+ */
+
+#include <string.h>
+#include <console/console.h>
+#include <arch/acpi.h>
+#include <arch/io.h>
+#include <device/device.h>
+#include <../southbridge/amd/sb700/sb700.h>
+
+/*extern*/ u16 pm_base = 0x800;
+/* pm_base should be set in sb acpi */
+/* pm_base should be got from bar2 of rs780. Here I compact ACPI
+ * registers into 32 bytes limit.
+ * */
+
+#define ACPI_PM_EVT_BLK (pm_base + 0x00) /* 4 bytes */
+#define ACPI_PM1_CNT_BLK (pm_base + 0x04) /* 2 bytes */
+#define ACPI_PMA_CNT_BLK (pm_base + 0x0F) /* 1 byte */
+#define ACPI_PM_TMR_BLK (pm_base + 0x18) /* 4 bytes */
+#define ACPI_GPE0_BLK (pm_base + 0x10) /* 8 bytes */
+#define ACPI_CPU_CONTORL (pm_base + 0x08) /* 6 bytes */
+
+void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt)
+{
+ acpi_header_t *header = &(fadt->header);
+
+ pm_base &= 0xFFFF;
+ printk(BIOS_DEBUG, "pm_base: 0x%04x\n", pm_base);
+
+ /* Prepare the header */
+ memset((void *)fadt, 0, sizeof(acpi_fadt_t));
+ memcpy(header->signature, "FACP", 4);
+ header->length = 244;
+ header->revision = 1;
+ memcpy(header->oem_id, OEM_ID, 6);
+ memcpy(header->oem_table_id, "COREBOOT", 8);
+ memcpy(header->asl_compiler_id, ASLC, 4);
+ header->asl_compiler_revision = 0;
+
+ fadt->firmware_ctrl = (u32) facs;
+ fadt->dsdt = (u32) dsdt;
+ /* 3=Workstation,4=Enterprise Server, 7=Performance Server */
+ fadt->preferred_pm_profile = 0x03;
+ fadt->sci_int = 9;
+ /* disable system management mode by setting to 0: */
+ fadt->smi_cmd = 0;
+ fadt->acpi_enable = 0xf0;
+ fadt->acpi_disable = 0xf1;
+ fadt->s4bios_req = 0x0;
+ fadt->pstate_cnt = 0xe2;
+
+ pm_iowrite(0x20, ACPI_PM_EVT_BLK & 0xFF);
+ pm_iowrite(0x21, ACPI_PM_EVT_BLK >> 8);
+ pm_iowrite(0x22, ACPI_PM1_CNT_BLK & 0xFF);
+ pm_iowrite(0x23, ACPI_PM1_CNT_BLK >> 8);
+ pm_iowrite(0x24, ACPI_PM_TMR_BLK & 0xFF);
+ pm_iowrite(0x25, ACPI_PM_TMR_BLK >> 8);
+ pm_iowrite(0x28, ACPI_GPE0_BLK & 0xFF);
+ pm_iowrite(0x29, ACPI_GPE0_BLK >> 8);
+
+ /* CpuControl is in \_PR.CPU0, 6 bytes */
+ pm_iowrite(0x26, ACPI_CPU_CONTORL & 0xFF);
+ pm_iowrite(0x27, ACPI_CPU_CONTORL >> 8);
+
+ pm_iowrite(0x2A, 0); /* AcpiSmiCmdLo */
+ pm_iowrite(0x2B, 0); /* AcpiSmiCmdHi */
+
+ pm_iowrite(0x2C, ACPI_PMA_CNT_BLK & 0xFF);
+ pm_iowrite(0x2D, ACPI_PMA_CNT_BLK >> 8);
+
+ pm_iowrite(0x0E, 1<<3 | 0<<2); /* AcpiDecodeEnable, When set, SB uses
+ * the contents of the PM registers at
+ * index 20-2B to decode ACPI I/O address.
+ * AcpiSmiEn & SmiCmdEn*/
+ pm_iowrite(0x10, 1<<1 | 1<<3| 1<<5); /* RTC_En_En, TMR_En_En, GBL_EN_EN */
+ outl(0x1, ACPI_PM1_CNT_BLK); /* set SCI_EN */
+
+ fadt->pm1a_evt_blk = ACPI_PM_EVT_BLK;
+ fadt->pm1b_evt_blk = 0x0000;
+ fadt->pm1a_cnt_blk = ACPI_PM1_CNT_BLK;
+ fadt->pm1b_cnt_blk = 0x0000;
+ fadt->pm2_cnt_blk = ACPI_PMA_CNT_BLK;
+ fadt->pm_tmr_blk = ACPI_PM_TMR_BLK;
+ fadt->gpe0_blk = ACPI_GPE0_BLK;
+ fadt->gpe1_blk = 0x0000; /* we dont have gpe1 block, do we? */
+
+ fadt->pm1_evt_len = 4;
+ fadt->pm1_cnt_len = 2;
+ fadt->pm2_cnt_len = 1;
+ fadt->pm_tmr_len = 4;
+ fadt->gpe0_blk_len = 8;
+ fadt->gpe1_blk_len = 0;
+ fadt->gpe1_base = 0;
+
+ fadt->cst_cnt = 0xe3;
+ fadt->p_lvl2_lat = 101;
+ fadt->p_lvl3_lat = 1001;
+ fadt->flush_size = 0;
+ fadt->flush_stride = 0;
+ fadt->duty_offset = 1;
+ fadt->duty_width = 3;
+ fadt->day_alrm = 0; /* 0x7d these have to be */
+ fadt->mon_alrm = 0; /* 0x7e added to cmos.layout */
+ fadt->century = 0; /* 0x7f to make rtc alrm work */
+ fadt->iapc_boot_arch = 0x3; /* See table 5-11 */
+ fadt->flags = 0x0001c1a5;/* 0x25; */
+
+ fadt->res2 = 0;
+
+ fadt->reset_reg.space_id = 1;
+ fadt->reset_reg.bit_width = 8;
+ fadt->reset_reg.bit_offset = 0;
+ fadt->reset_reg.resv = 0;
+ fadt->reset_reg.addrl = 0xcf9;
+ fadt->reset_reg.addrh = 0x0;
+
+ fadt->reset_value = 6;
+ fadt->x_firmware_ctl_l = (u32) facs;
+ fadt->x_firmware_ctl_h = 0;
+ fadt->x_dsdt_l = (u32) dsdt;
+ fadt->x_dsdt_h = 0;
+
+ fadt->x_pm1a_evt_blk.space_id = 1;
+ fadt->x_pm1a_evt_blk.bit_width = 32;
+ fadt->x_pm1a_evt_blk.bit_offset = 0;
+ fadt->x_pm1a_evt_blk.resv = 0;
+ fadt->x_pm1a_evt_blk.addrl = ACPI_PM_EVT_BLK;
+ fadt->x_pm1a_evt_blk.addrh = 0x0;
+
+ fadt->x_pm1b_evt_blk.space_id = 1;
+ fadt->x_pm1b_evt_blk.bit_width = 4;
+ fadt->x_pm1b_evt_blk.bit_offset = 0;
+ fadt->x_pm1b_evt_blk.resv = 0;
+ fadt->x_pm1b_evt_blk.addrl = 0x0;
+ fadt->x_pm1b_evt_blk.addrh = 0x0;
+
+ fadt->x_pm1a_cnt_blk.space_id = 1;
+ fadt->x_pm1a_cnt_blk.bit_width = 16;
+ fadt->x_pm1a_cnt_blk.bit_offset = 0;
+ fadt->x_pm1a_cnt_blk.resv = 0;
+ fadt->x_pm1a_cnt_blk.addrl = ACPI_PM1_CNT_BLK;
+ fadt->x_pm1a_cnt_blk.addrh = 0x0;
+
+ fadt->x_pm1b_cnt_blk.space_id = 1;
+ fadt->x_pm1b_cnt_blk.bit_width = 2;
+ fadt->x_pm1b_cnt_blk.bit_offset = 0;
+ fadt->x_pm1b_cnt_blk.resv = 0;
+ fadt->x_pm1b_cnt_blk.addrl = 0x0;
+ fadt->x_pm1b_cnt_blk.addrh = 0x0;
+
+ fadt->x_pm2_cnt_blk.space_id = 1;
+ fadt->x_pm2_cnt_blk.bit_width = 0;
+ fadt->x_pm2_cnt_blk.bit_offset = 0;
+ fadt->x_pm2_cnt_blk.resv = 0;
+ fadt->x_pm2_cnt_blk.addrl = ACPI_PMA_CNT_BLK;
+ fadt->x_pm2_cnt_blk.addrh = 0x0;
+
+ fadt->x_pm_tmr_blk.space_id = 1;
+ fadt->x_pm_tmr_blk.bit_width = 32;
+ fadt->x_pm_tmr_blk.bit_offset = 0;
+ fadt->x_pm_tmr_blk.resv = 0;
+ fadt->x_pm_tmr_blk.addrl = ACPI_PM_TMR_BLK;
+ fadt->x_pm_tmr_blk.addrh = 0x0;
+
+ fadt->x_gpe0_blk.space_id = 1;
+ fadt->x_gpe0_blk.bit_width = 32;
+ fadt->x_gpe0_blk.bit_offset = 0;
+ fadt->x_gpe0_blk.resv = 0;
+ fadt->x_gpe0_blk.addrl = ACPI_GPE0_BLK;
+ fadt->x_gpe0_blk.addrh = 0x0;
+
+ fadt->x_gpe1_blk.space_id = 1;
+ fadt->x_gpe1_blk.bit_width = 0;
+ fadt->x_gpe1_blk.bit_offset = 0;
+ fadt->x_gpe1_blk.resv = 0;
+ fadt->x_gpe1_blk.addrl = 0;
+ fadt->x_gpe1_blk.addrh = 0x0;
+
+ header->checksum = acpi_checksum((void *)fadt, sizeof(acpi_fadt_t));
+}
--- /dev/null
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <string.h>
+#include <stdint.h>
+#include <stdlib.h>
+#if CONFIG_LOGICAL_CPUS==1
+#include <cpu/amd/multicore.h>
+#endif
+
+#include <cpu/amd/amdk8_sysconf.h>
+
+/* Global variables for MB layouts and these will be shared by irqtable mptable
+* and acpi_tables busnum is default.
+*/
+u8 bus_isa;
+u8 bus_rs780[11];
+u8 bus_sb700[2];
+u32 apicid_sb700;
+
+/*
+* Here you only need to set value in pci1234 for HT-IO that could be installed or not
+* You may need to preset pci1234 for HTIO board,
+* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail
+*/
+u32 pci1234x[] = {
+ 0x0000ff0,
+};
+
+/*
+* HT Chain device num, actually it is unit id base of every ht device in chain,
+* assume every chain only have 4 ht device at most
+*/
+u32 hcdnx[] = {
+ 0x20202020,
+};
+
+u32 bus_type[256];
+
+u32 sbdn_rs780;
+u32 sbdn_sb700;
+
+extern void get_sblk_pci1234(void);
+
+static u32 get_bus_conf_done = 0;
+
+void get_bus_conf(void);
+
+void get_bus_conf(void)
+{
+ u32 apicid_base;
+ device_t dev;
+ int i, j;
+
+ if (get_bus_conf_done == 1)
+ return; /* do it only once */
+ get_bus_conf_done = 1;
+
+ sysconf.hc_possible_num = ARRAY_SIZE(pci1234x);
+ for (i = 0; i < sysconf.hc_possible_num; i++) {
+ sysconf.pci1234[i] = pci1234x[i];
+ sysconf.hcdn[i] = hcdnx[i];
+ }
+
+ get_sblk_pci1234();
+
+ sysconf.sbdn = (sysconf.hcdn[0] & 0xff);
+ sbdn_rs780 = sysconf.sbdn;
+ sbdn_sb700 = 0;
+
+ for (i = 0; i < 2; i++) {
+ bus_sb700[i] = 0;
+ }
+ for (i = 0; i < ARRAY_SIZE(bus_rs780); i++) {
+ bus_rs780[i] = 0;
+ }
+
+ for (i = 0; i < 256; i++) {
+ bus_type[i] = 0; /* default ISA bus. */
+ }
+
+ bus_type[0] = 1; /* pci */
+
+ bus_rs780[0] = (sysconf.pci1234[0] >> 16) & 0xff;
+ bus_sb700[0] = bus_rs780[0];
+
+ bus_type[bus_rs780[0]] = 1;
+
+ /* sb700 */
+ dev = dev_find_slot(bus_sb700[0], PCI_DEVFN(sbdn_sb700 + 0x14, 4));
+ if (dev) {
+ bus_sb700[1] = pci_read_config8(dev, PCI_SECONDARY_BUS);
+ bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
+ bus_isa++;
+ for (j = bus_sb700[1]; j < bus_isa; j++)
+ bus_type[j] = 1;
+ }
+
+ /* rs780 */
+ for (i = 1; i < ARRAY_SIZE(bus_rs780); i++) {
+ dev = dev_find_slot(bus_rs780[0], PCI_DEVFN(sbdn_rs780 + i, 0));
+ if (dev) {
+ bus_rs780[i] = pci_read_config8(dev, PCI_SECONDARY_BUS);
+ if(255 != bus_rs780[i]) {
+ bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
+ bus_isa++;
+ bus_type[bus_rs780[i]] = 1; /* PCI bus. */
+ }
+ }
+ }
+
+ /* I/O APICs: APIC ID Version State Address */
+ bus_isa = 10;
+#if CONFIG_LOGICAL_CPUS==1
+ apicid_base = get_apicid_base(1);
+#else
+ apicid_base = CONFIG_MAX_PHYSICAL_CPUS;
+#endif
+ apicid_sb700 = apicid_base + 0;
+}
--- /dev/null
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/* This file was generated by getpir.c, do not modify!
+ (but if you do, please run checkpir on it to verify)
+ Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up
+
+ Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM
+*/
+#include <console/console.h>
+#include <device/pci.h>
+#include <string.h>
+#include <stdint.h>
+#include <arch/pirq_routing.h>
+
+#include <cpu/amd/amdk8_sysconf.h>
+
+extern void get_bus_conf(void);
+
+static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn,
+ u8 link0, u16 bitmap0, u8 link1, u16 bitmap1,
+ u8 link2, u16 bitmap2, u8 link3, u16 bitmap3,
+ u8 slot, u8 rfu)
+{
+ pirq_info->bus = bus;
+ pirq_info->devfn = devfn;
+ pirq_info->irq[0].link = link0;
+ pirq_info->irq[0].bitmap = bitmap0;
+ pirq_info->irq[1].link = link1;
+ pirq_info->irq[1].bitmap = bitmap1;
+ pirq_info->irq[2].link = link2;
+ pirq_info->irq[2].bitmap = bitmap2;
+ pirq_info->irq[3].link = link3;
+ pirq_info->irq[3].bitmap = bitmap3;
+ pirq_info->slot = slot;
+ pirq_info->rfu = rfu;
+}
+extern u8 bus_isa;
+extern u8 bus_rs780[8];
+extern u8 bus_sb700[2];
+extern unsigned long sbdn_sb700;
+
+unsigned long write_pirq_routing_table(unsigned long addr)
+{
+ struct irq_routing_table *pirq;
+ struct irq_info *pirq_info;
+ u32 slot_num;
+ u8 *v;
+
+ u8 sum = 0;
+ int i;
+
+ get_bus_conf(); /* it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c */
+
+ /* Align the table to be 16 byte aligned. */
+ addr += 15;
+ addr &= ~15;
+
+ /* This table must be betweeen 0xf0000 & 0x100000 */
+ printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr);
+
+ pirq = (void *)(addr);
+ v = (u8 *) (addr);
+
+ pirq->signature = PIRQ_SIGNATURE;
+ pirq->version = PIRQ_VERSION;
+
+ pirq->rtr_bus = bus_sb700[0];
+ pirq->rtr_devfn = ((sbdn_sb700 + 0x14) << 3) | 4;
+
+ pirq->exclusive_irqs = 0;
+
+ pirq->rtr_vendor = 0x1002;
+ pirq->rtr_device = 0x4384;
+
+ pirq->miniport_data = 0;
+
+ memset(pirq->rfu, 0, sizeof(pirq->rfu));
+
+ pirq_info = (void *)(&pirq->checksum + 1);
+ slot_num = 0;
+
+ /* pci bridge */
+ write_pirq_info(pirq_info, bus_sb700[0], ((sbdn_sb700 + 0x14) << 3) | 4,
+ 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0,
+ 0);
+ pirq_info++;
+ slot_num++;
+
+ pirq->size = 32 + 16 * slot_num;
+
+ for (i = 0; i < pirq->size; i++)
+ sum += v[i];
+
+ sum = pirq->checksum - sum;
+ if (sum != pirq->checksum) {
+ pirq->checksum = sum;
+ }
+
+ printk(BIOS_INFO, "write_pirq_routing_table done.\n");
+
+ return (unsigned long)pirq_info;
+}
--- /dev/null
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <arch/io.h>
+#include <boot/coreboot_tables.h>
+#include <cpu/x86/msr.h>
+#include <cpu/amd/mtrr.h>
+#include <device/pci_def.h>
+#include <arch/coreboot_tables.h>
+#include <../southbridge/amd/sb700/sb700.h>
+#include "chip.h"
+
+#define SMBUS_IO_BASE 0x6000
+
+extern void lb_add_memory_range(struct lb_memory *mem, uint32_t type,
+ uint64_t start, uint64_t size);
+
+uint64_t uma_memory_base, uma_memory_size;
+
+void set_pcie_dereset(void);
+void set_pcie_reset(void);
+
+/*
+ * Mahogany uses GPIO 6 as PCIe slot reset, GPIO4 as GFX slot reset. We need to
+ * pull it up before training the slot.
+ ***/
+void set_pcie_dereset()
+{
+ u16 word;
+ device_t sm_dev;
+ /* GPIO 6 reset PCIe slot, GPIO 4 reset GFX PCIe */
+ sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0));
+
+ word = pci_read_config16(sm_dev, 0xA8);
+ word |= (1 << 0) | (1 << 2); /* Set Gpio6,4 as output */
+ word &= ~((1 << 8) | (1 << 10));
+ pci_write_config16(sm_dev, 0xA8, word);
+}
+
+void set_pcie_reset()
+{
+ u16 word;
+ device_t sm_dev;
+ /* GPIO 6 reset PCIe slot, GPIO 4 reset GFX PCIe */
+ sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0));
+
+ word = pci_read_config16(sm_dev, 0xA8);
+ word &= ~((1 << 0) | (1 << 2)); /* Set Gpio6,4 as output */
+ word &= ~((1 << 8) | (1 << 10));
+ pci_write_config16(sm_dev, 0xA8, word);
+}
+
+#if 0 /* not tested yet */
+/********************************************************
+* mahogany uses SB700 GPIO9 to detect IDE_DMA66.
+* IDE_DMA66 is routed to GPIO 9. So we read Gpio 9 to
+* get the cable type, 40 pin or 80 pin?
+********************************************************/
+static void get_ide_dma66(void)
+{
+ u8 byte;
+ /*u32 sm_dev, ide_dev; */
+ device_t sm_dev, ide_dev;
+
+ sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0));
+
+ byte = pci_read_config8(sm_dev, 0xA9);
+ byte |= (1 << 5); /* Set Gpio9 as input */
+ pci_write_config8(sm_dev, 0xA9, byte);
+
+ ide_dev = dev_find_slot(0, PCI_DEVFN(0x14, 1));
+ byte = pci_read_config8(ide_dev, 0x56);
+ byte &= ~(7 << 0);
+ if ((1 << 5) & pci_read_config8(sm_dev, 0xAA))
+ byte |= 2 << 0; /* mode 2 */
+ else
+ byte |= 5 << 0; /* mode 5 */
+ pci_write_config8(ide_dev, 0x56, byte);
+}
+#endif /* get_ide_dma66 */
+
+/*************************************************
+* enable the dedicated function in mahogany board.
+* This function called early than rs780_enable.
+*************************************************/
+static void mahogany_enable(device_t dev)
+{
+ /* Leave it for future. */
+ /* struct mainboard_config *mainboard =
+ (struct mainboard_config *)dev->chip_info;*/
+
+ printk(BIOS_INFO, "Mainboard MAHOGANY Enable. dev=0x%p\n", dev);
+
+#if (CONFIG_GFXUMA == 1)
+ msr_t msr, msr2;
+
+ /* TOP_MEM: the top of DRAM below 4G */
+ msr = rdmsr(TOP_MEM);
+ printk
+ (BIOS_INFO, "%s, TOP MEM: msr.lo = 0x%08x, msr.hi = 0x%08x\n",
+ __func__, msr.lo, msr.hi);
+
+ /* TOP_MEM2: the top of DRAM above 4G */
+ msr2 = rdmsr(TOP_MEM2);
+ printk
+ (BIOS_INFO, "%s, TOP MEM2: msr2.lo = 0x%08x, msr2.hi = 0x%08x\n",
+ __func__, msr2.lo, msr2.hi);
+
+ /* refer to UMA Size Consideration in 780 BDG. */
+ switch (msr.lo) {
+ case 0x10000000: /* 256M system memory */
+ uma_memory_size = 0x4000000; /* 64M recommended UMA */
+ break;
+
+ case 0x20000000: /* 512M system memory */
+ uma_memory_size = 0x8000000; /* 128M recommended UMA */
+ break;
+
+ default: /* 1GB and above system memory */
+ uma_memory_size = 0x10000000; /* 256M recommended UMA */
+ break;
+ }
+
+ uma_memory_base = msr.lo - uma_memory_size; /* TOP_MEM1 */
+ printk(BIOS_INFO, "%s: uma size 0x%08llx, memory start 0x%08llx\n",
+ __func__, uma_memory_size, uma_memory_base);
+
+ /* TODO: TOP_MEM2 */
+#else
+ uma_memory_size = 0x8000000; /* 128M recommended UMA */
+ uma_memory_base = 0x38000000; /* 1GB system memory supposed */
+#endif
+
+ set_pcie_dereset();
+ /* get_ide_dma66(); */
+}
+
+int add_mainboard_resources(struct lb_memory *mem)
+{
+ /* UMA is removed from system memory in the northbridge code, but
+ * in some circumstances we want the memory mentioned as reserved.
+ */
+#if (CONFIG_GFXUMA == 1)
+ printk(BIOS_INFO, "uma_memory_start=0x%llx, uma_memory_size=0x%llx \n",
+ uma_memory_base, uma_memory_size);
+ lb_add_memory_range(mem, LB_MEM_RESERVED, uma_memory_base,
+ uma_memory_size);
+#endif
+ return 0;
+}
+
+struct chip_operations mainboard_ops = {
+ CHIP_NAME("AMD MAHOGANY Mainboard")
+ .enable_dev = mahogany_enable,
+};
--- /dev/null
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+
+#include <console/console.h>
+#include <arch/smp/mpspec.h>
+#include <device/pci.h>
+#include <arch/io.h>
+#include <string.h>
+#include <stdint.h>
+
+#include <cpu/amd/amdk8_sysconf.h>
+
+extern u8 bus_isa;
+extern u8 bus_rs780[11];
+extern u8 bus_sb700[2];
+
+extern u32 apicid_sb700;
+
+extern u32 bus_type[256];
+extern u32 sbdn_rs780;
+extern u32 sbdn_sb700;
+
+extern void get_bus_conf(void);
+
+static void *smp_write_config_table(void *v)
+{
+ static const char sig[4] = "PCMP";
+ static const char oem[8] = "AMD ";
+ static const char productid[12] = "MAHOGANY ";
+ struct mp_config_table *mc;
+ int j;
+
+ mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
+ memset(mc, 0, sizeof(*mc));
+
+ memcpy(mc->mpc_signature, sig, sizeof(sig));
+ mc->mpc_length = sizeof(*mc); /* initially just the header */
+ mc->mpc_spec = 0x04;
+ mc->mpc_checksum = 0; /* not yet computed */
+ memcpy(mc->mpc_oem, oem, sizeof(oem));
+ memcpy(mc->mpc_productid, productid, sizeof(productid));
+ mc->mpc_oemptr = 0;
+ mc->mpc_oemsize = 0;
+ mc->mpc_entry_count = 0; /* No entries yet... */
+ mc->mpc_lapic = LAPIC_ADDR;
+ mc->mpe_length = 0;
+ mc->mpe_checksum = 0;
+ mc->reserved = 0;
+
+ smp_write_processors(mc);
+
+ get_bus_conf();
+
+ /* Bus: Bus ID Type */
+ /* define bus and isa numbers */
+ for (j = 0; j < bus_isa; j++) {
+ smp_write_bus(mc, j, (char *)"PCI ");
+ }
+ smp_write_bus(mc, bus_isa, (char *)"ISA ");
+
+ /* I/O APICs: APIC ID Version State Address */
+ {
+ device_t dev;
+ u32 dword;
+ u8 byte;
+
+ dev =
+ dev_find_slot(bus_sb700[0],
+ PCI_DEVFN(sbdn_sb700 + 0x14, 0));
+ if (dev) {
+ dword = pci_read_config32(dev, 0x74) & 0xfffffff0;
+ smp_write_ioapic(mc, apicid_sb700, 0x11, dword);
+
+ /* Initialize interrupt mapping */
+ /* aza */
+ byte = pci_read_config8(dev, 0x63);
+ byte &= 0xf8;
+ byte |= 0; /* 0: INTA, ...., 7: INTH */
+ pci_write_config8(dev, 0x63, byte);
+
+ /* SATA */
+ dword = pci_read_config32(dev, 0xac);
+ dword &= ~(7 << 26);
+ dword |= 6 << 26; /* 0: INTA, ...., 7: INTH */
+ /* dword |= 1<<22; PIC and APIC co exists */
+ pci_write_config32(dev, 0xac, dword);
+
+ /*
+ * 00:12.0: PROG SATA : INT F
+ * 00:13.0: INTA USB_0
+ * 00:13.1: INTB USB_1
+ * 00:13.2: INTC USB_2
+ * 00:13.3: INTD USB_3
+ * 00:13.4: INTC USB_4
+ * 00:13.5: INTD USB2
+ * 00:14.1: INTA IDE
+ * 00:14.2: Prog HDA : INT E
+ * 00:14.5: INTB ACI
+ * 00:14.6: INTB MCI
+ */
+ }
+ }
+
+ /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */
+#define IO_LOCAL_INT(type, intr, apicid, pin) \
+ smp_write_intsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin));
+
+ IO_LOCAL_INT(mp_ExtINT, 0x0, apicid_sb700, 0x0);
+
+ /* ISA ints are edge-triggered, and usually originate from the ISA bus,
+ * or its remainings.
+ */
+#define ISA_INT(intr, pin) \
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, (intr), apicid_sb700, (pin))
+
+ ISA_INT(0x1, 0x1);
+ ISA_INT(0x0, 0x2);
+ ISA_INT(0x3, 0x3);
+ ISA_INT(0x4, 0x4);
+ ISA_INT(0x6, 0x6);
+ ISA_INT(0x7, 0x7);
+ ISA_INT(0xc, 0xc);
+ ISA_INT(0xd, 0xd);
+ ISA_INT(0xe, 0xe);
+
+ /* PCI interrupts are level triggered, and are
+ * associated with a specific bus/device/function tuple.
+ */
+#if CONFIG_GENERATE_ACPI_TABLES == 0
+#define PCI_INT(bus, dev, fn, pin) \
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), apicid_sb700, (pin))
+#else
+#define PCI_INT(bus, dev, fn, pin)
+#endif
+
+ /* usb */
+ PCI_INT(0x0, 0x12, 0x0, 0x10); /* USB */
+ PCI_INT(0x0, 0x12, 0x1, 0x11);
+ PCI_INT(0x0, 0x13, 0x0, 0x12);
+ PCI_INT(0x0, 0x13, 0x1, 0x13);
+ PCI_INT(0x0, 0x14, 0x0, 0x10);
+
+ /* sata */
+ PCI_INT(0x0, 0x11, 0x0, 0x16);
+
+ /* HD Audio: b0:d20:f1:reg63 should be 0. */
+ /* PCI_INT(0x0, 0x14, 0x2, 0x12); */
+
+ /* on board NIC & Slot PCIE. */
+ /* PCI_INT(bus_rs780[0x1], 0x5, 0x0, 0x12); */
+/* PCI_INT(bus_rs780[0x1], 0x5, 0x1, 0x13); */
+ PCI_INT(bus_rs780[0x2], 0x0, 0x0, 0x12); /* Dev 2, external GFX */
+ /* PCI_INT(bus_rs780[0x3], 0x0, 0x0, 0x13); */
+ PCI_INT(bus_rs780[0x4], 0x0, 0x0, 0x10);
+ /* configuration B doesnt need dev 5,6,7 */
+ /*
+ * PCI_INT(bus_rs780[0x5], 0x0, 0x0, 0x11);
+ * PCI_INT(bus_rs780[0x6], 0x0, 0x0, 0x12);
+ * PCI_INT(bus_rs780[0x7], 0x0, 0x0, 0x13);
+ */
+ PCI_INT(bus_rs780[0x9], 0x0, 0x0, 0x11);
+ PCI_INT(bus_rs780[0xA], 0x0, 0x0, 0x12); /* NIC */
+
+ /* PCI slots */
+ /* PCI_SLOT 0. */
+ PCI_INT(bus_sb700[1], 0x5, 0x0, 0x14);
+ PCI_INT(bus_sb700[1], 0x5, 0x1, 0x15);
+ PCI_INT(bus_sb700[1], 0x5, 0x2, 0x16);
+ PCI_INT(bus_sb700[1], 0x5, 0x3, 0x17);
+
+ /* PCI_SLOT 1. */
+ PCI_INT(bus_sb700[1], 0x6, 0x0, 0x15);
+ PCI_INT(bus_sb700[1], 0x6, 0x1, 0x16);
+ PCI_INT(bus_sb700[1], 0x6, 0x2, 0x17);
+ PCI_INT(bus_sb700[1], 0x6, 0x3, 0x14);
+
+ /* PCI_SLOT 2. */
+ PCI_INT(bus_sb700[1], 0x7, 0x0, 0x16);
+ PCI_INT(bus_sb700[1], 0x7, 0x1, 0x17);
+ PCI_INT(bus_sb700[1], 0x7, 0x2, 0x14);
+ PCI_INT(bus_sb700[1], 0x7, 0x3, 0x15);
+
+ /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */
+ IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0);
+ IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1);
+ /* There is no extension information... */
+
+ /* Compute the checksums */
+ mc->mpe_checksum =
+ smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length);
+ mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length);
+ printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n",
+ mc, smp_next_mpe_entry(mc));
+ return smp_next_mpe_entry(mc);
+}
+
+unsigned long write_smp_table(unsigned long addr)
+{
+ void *v;
+ v = smp_write_floating_table(addr);
+ return (unsigned long)smp_write_config_table(v);
+}
--- /dev/null
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+static void setup_939a785gmh_resource_map(void)
+{
+ static const unsigned int register_values[] = {
+ /* Careful set limit registers before base registers which contain the enables */
+ /* DRAM Limit i Registers
+ * F1:0x44 i = 0
+ * F1:0x4C i = 1
+ * F1:0x54 i = 2
+ * F1:0x5C i = 3
+ * F1:0x64 i = 4
+ * F1:0x6C i = 5
+ * F1:0x74 i = 6
+ * F1:0x7C i = 7
+ * [ 2: 0] Destination Node ID
+ * 000 = Node 0
+ * 001 = Node 1
+ * 010 = Node 2
+ * 011 = Node 3
+ * 100 = Node 4
+ * 101 = Node 5
+ * 110 = Node 6
+ * 111 = Node 7
+ * [ 7: 3] Reserved
+ * [10: 8] Interleave select
+ * specifies the values of A[14:12] to use with interleave enable.
+ * [15:11] Reserved
+ * [31:16] DRAM Limit Address i Bits 39-24
+ * This field defines the upper address bits of a 40 bit address
+ * that define the end of the DRAM region.
+ */
+ PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001,
+ PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002,
+ PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003,
+ PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004,
+ PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005,
+ PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006,
+ PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007,
+ /* DRAM Base i Registers
+ * F1:0x40 i = 0
+ * F1:0x48 i = 1
+ * F1:0x50 i = 2
+ * F1:0x58 i = 3
+ * F1:0x60 i = 4
+ * F1:0x68 i = 5
+ * F1:0x70 i = 6
+ * F1:0x78 i = 7
+ * [ 0: 0] Read Enable
+ * 0 = Reads Disabled
+ * 1 = Reads Enabled
+ * [ 1: 1] Write Enable
+ * 0 = Writes Disabled
+ * 1 = Writes Enabled
+ * [ 7: 2] Reserved
+ * [10: 8] Interleave Enable
+ * 000 = No interleave
+ * 001 = Interleave on A[12] (2 nodes)
+ * 010 = reserved
+ * 011 = Interleave on A[12] and A[14] (4 nodes)
+ * 100 = reserved
+ * 101 = reserved
+ * 110 = reserved
+ * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes)
+ * [15:11] Reserved
+ * [13:16] DRAM Base Address i Bits 39-24
+ * This field defines the upper address bits of a 40-bit address
+ * that define the start of the DRAM region.
+ */
+ PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000,
+
+ /* Memory-Mapped I/O Limit i Registers
+ * F1:0x84 i = 0
+ * F1:0x8C i = 1
+ * F1:0x94 i = 2
+ * F1:0x9C i = 3
+ * F1:0xA4 i = 4
+ * F1:0xAC i = 5
+ * F1:0xB4 i = 6
+ * F1:0xBC i = 7
+ * [ 2: 0] Destination Node ID
+ * 000 = Node 0
+ * 001 = Node 1
+ * 010 = Node 2
+ * 011 = Node 3
+ * 100 = Node 4
+ * 101 = Node 5
+ * 110 = Node 6
+ * 111 = Node 7
+ * [ 3: 3] Reserved
+ * [ 5: 4] Destination Link ID
+ * 00 = Link 0
+ * 01 = Link 1
+ * 10 = Link 2
+ * 11 = Reserved
+ * [ 6: 6] Reserved
+ * [ 7: 7] Non-Posted
+ * 0 = CPU writes may be posted
+ * 1 = CPU writes must be non-posted
+ * [31: 8] Memory-Mapped I/O Limit Address i (39-16)
+ * This field defines the upp adddress bits of a 40-bit address that
+ * defines the end of a memory-mapped I/O region n
+ */
+ PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00,
+
+ /* Memory-Mapped I/O Base i Registers
+ * F1:0x80 i = 0
+ * F1:0x88 i = 1
+ * F1:0x90 i = 2
+ * F1:0x98 i = 3
+ * F1:0xA0 i = 4
+ * F1:0xA8 i = 5
+ * F1:0xB0 i = 6
+ * F1:0xB8 i = 7
+ * [ 0: 0] Read Enable
+ * 0 = Reads disabled
+ * 1 = Reads Enabled
+ * [ 1: 1] Write Enable
+ * 0 = Writes disabled
+ * 1 = Writes Enabled
+ * [ 2: 2] Cpu Disable
+ * 0 = Cpu can use this I/O range
+ * 1 = Cpu requests do not use this I/O range
+ * [ 3: 3] Lock
+ * 0 = base/limit registers i are read/write
+ * 1 = base/limit registers i are read-only
+ * [ 7: 4] Reserved
+ * [31: 8] Memory-Mapped I/O Base Address i (39-16)
+ * This field defines the upper address bits of a 40bit address
+ * that defines the start of memory-mapped I/O region i
+ */
+ PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003,
+
+ /* PCI I/O Limit i Registers
+ * F1:0xC4 i = 0
+ * F1:0xCC i = 1
+ * F1:0xD4 i = 2
+ * F1:0xDC i = 3
+ * [ 2: 0] Destination Node ID
+ * 000 = Node 0
+ * 001 = Node 1
+ * 010 = Node 2
+ * 011 = Node 3
+ * 100 = Node 4
+ * 101 = Node 5
+ * 110 = Node 6
+ * 111 = Node 7
+ * [ 3: 3] Reserved
+ * [ 5: 4] Destination Link ID
+ * 00 = Link 0
+ * 01 = Link 1
+ * 10 = Link 2
+ * 11 = reserved
+ * [11: 6] Reserved
+ * [24:12] PCI I/O Limit Address i
+ * This field defines the end of PCI I/O region n
+ * [31:25] Reserved
+ */
+ PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff000,
+ PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000,
+
+ /* PCI I/O Base i Registers
+ * F1:0xC0 i = 0
+ * F1:0xC8 i = 1
+ * F1:0xD0 i = 2
+ * F1:0xD8 i = 3
+ * [ 0: 0] Read Enable
+ * 0 = Reads Disabled
+ * 1 = Reads Enabled
+ * [ 1: 1] Write Enable
+ * 0 = Writes Disabled
+ * 1 = Writes Enabled
+ * [ 3: 2] Reserved
+ * [ 4: 4] VGA Enable
+ * 0 = VGA matches Disabled
+ * 1 = matches all address < 64K and where A[9:0] is in the
+ * range 3B0-3BB or 3C0-3DF independen of the base & limit registers
+ * [ 5: 5] ISA Enable
+ * 0 = ISA matches Disabled
+ * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block
+ * from matching agains this base/limit pair
+ * [11: 6] Reserved
+ * [24:12] PCI I/O Base i
+ * This field defines the start of PCI I/O region n
+ * [31:25] Reserved
+ */
+ PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000003,
+ PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000,
+
+ /* Config Base and Limit i Registers
+ * F1:0xE0 i = 0
+ * F1:0xE4 i = 1
+ * F1:0xE8 i = 2
+ * F1:0xEC i = 3
+ * [ 0: 0] Read Enable
+ * 0 = Reads Disabled
+ * 1 = Reads Enabled
+ * [ 1: 1] Write Enable
+ * 0 = Writes Disabled
+ * 1 = Writes Enabled
+ * [ 2: 2] Device Number Compare Enable
+ * 0 = The ranges are based on bus number
+ * 1 = The ranges are ranges of devices on bus 0
+ * [ 3: 3] Reserved
+ * [ 6: 4] Destination Node
+ * 000 = Node 0
+ * 001 = Node 1
+ * 010 = Node 2
+ * 011 = Node 3
+ * 100 = Node 4
+ * 101 = Node 5
+ * 110 = Node 6
+ * 111 = Node 7
+ * [ 7: 7] Reserved
+ * [ 9: 8] Destination Link
+ * 00 = Link 0
+ * 01 = Link 1
+ * 10 = Link 2
+ * 11 - Reserved
+ * [15:10] Reserved
+ * [23:16] Bus Number Base i
+ * This field defines the lowest bus number in configuration region i
+ * [31:24] Bus Number Limit i
+ * This field defines the highest bus number in configuration regin i
+ */
+ PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x08000003,
+ PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000,
+ };
+
+ int max;
+ max = ARRAY_SIZE(register_values);
+ setup_resource_map(register_values, max);
+}
--- /dev/null
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ * Copyright (C) 2010 Rudolf Marek <r.marek@assembler.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#define RAMINIT_SYSINFO 1
+#define K8_SET_FIDVID 1
+#define QRANK_DIMM_SUPPORT 1
+#if CONFIG_LOGICAL_CPUS==1
+#define SET_NB_CFG_54 1
+#endif
+
+#define RC0 (6<<8)
+#define RC1 (7<<8)
+
+#define DIMM0 0x50
+#define DIMM1 0x51
+
+#define ICS951462_ADDRESS 0x69
+#define SMBUS_HUB 0x71
+
+#include <stdint.h>
+#include <string.h>
+#include <device/pci_def.h>
+#include <arch/io.h>
+#include <device/pnp_def.h>
+#include <arch/romcc_io.h>
+#include <cpu/x86/lapic.h>
+#include "option_table.h"
+#include "pc80/mc146818rtc_early.c"
+#include "pc80/serial.c"
+#include "console/console.c"
+
+#include <cpu/amd/model_fxx_rev.h>
+#include "northbridge/amd/amdk8/raminit.h"
+#include "cpu/amd/model_fxx/apic_timer.c"
+#include "lib/delay.c"
+
+#include "cpu/x86/lapic/boot_cpu.c"
+#include "northbridge/amd/amdk8/reset_test.c"
+#include "superio/winbond/w83627dhg/w83627dhg_early_serial.c"
+
+#include "cpu/amd/mtrr/amd_earlymtrr.c"
+#include "cpu/x86/bist.h"
+
+#include "northbridge/amd/amdk8/setup_resource_map.c"
+
+#include "southbridge/amd/rs780/rs780_early_setup.c"
+#include "southbridge/amd/sb700/sb700_early_setup.c"
+#include "northbridge/amd/amdk8/debug.c" /* After sb700_early_setup.c! */
+
+#define SERIAL_DEV PNP_DEV(0x2e, W83627DHG_SP1)
+#define GPIO6_DEV PNP_DEV(0x2e, W83627DHG_GPIO6)
+#define GPIO2345_DEV PNP_DEV(0x2e, W83627DHG_GPIO2345)
+
+/* CAN'T BE REMOVED! crt0.S will use it. I don't know WHY!*/
+static void memreset(int controllers, const struct mem_controller *ctrl)
+{
+}
+
+/* called in raminit_f.c */
+static inline void activate_spd_rom(const struct mem_controller *ctrl)
+{
+}
+
+/*called in raminit_f.c */
+static inline int spd_read_byte(u32 device, u32 address)
+{
+ return smbus_read_byte(device, address);
+}
+
+#include "northbridge/amd/amdk8/amdk8.h"
+#include "northbridge/amd/amdk8/incoherent_ht.c"
+#include "northbridge/amd/amdk8/raminit.c"
+#include "northbridge/amd/amdk8/coherent_ht.c"
+#include "lib/generic_sdram.c"
+#include "resourcemap.c"
+
+#include "cpu/amd/dualcore/dualcore.c"
+
+#include "cpu/amd/car/copy_and_run.c"
+#include "cpu/amd/car/post_cache_as_ram.c"
+
+#include "cpu/amd/model_fxx/init_cpus.c"
+
+#include "cpu/amd/model_fxx/fidvid.c"
+
+#include "northbridge/amd/amdk8/early_ht.c"
+
+void sio_init(void)
+{
+ u8 reg;
+
+ pnp_enter_ext_func_mode(GPIO2345_DEV);
+ pnp_set_logical_device(GPIO2345_DEV);
+
+ /* Pin 119 ~ 120 GP21, GP20 */
+ reg = pnp_read_config(GPIO2345_DEV, 0x29);
+ pnp_write_config(GPIO2345_DEV, 0x29, (reg | 2));
+
+ /* todo document this */
+ pnp_write_config(GPIO2345_DEV, 0x2c, 0x1);
+ pnp_write_config(GPIO2345_DEV, 0x2d, 0x1);
+
+
+//idx 30 e0 e1 e2 e3 e4 e5 e6 e7 e8 e9 f0 f1 f2 f3 f4 f5 f6 f7 fe
+//val 07 XX XX XX f6 0e 00 00 00 00 ff d6 96 00 40 d0 83 00 00 07
+
+//GPO20 - 1 = 1.82 0 = 1.92 sideport voltage
+//mGPUV GPO40 | GPO41 | GPIO23 - 000 - 1.45V step 0.05 -- 111 - 1.10V
+//DDR voltage 44 45 46
+
+ /* GPO20 - sideport voltage GPO23 - mgpuV */
+ pnp_write_config(GPIO2345_DEV, 0x30, 0x07); /* Enable GPIO 2,3,4. */
+ pnp_write_config(GPIO2345_DEV, 0xe3, 0xf6); /* dir of GPIO2 11110110*/
+ pnp_write_config(GPIO2345_DEV, 0xe4, 0x0e); /* data */
+ pnp_write_config(GPIO2345_DEV, 0xe5, 0x00); /* No inversion */
+
+ /* GPO30 GPO33 GPO35 */
+ //GPO35 - loadline control 0 - enabled
+ //GPIO30 - unknown
+ //GPIO33 - unknown
+ pnp_write_config(GPIO2345_DEV, 0xf0, 0xd6); /* dir of GPIO3 11010110*/
+ pnp_write_config(GPIO2345_DEV, 0xf1, 0x96); /* data */
+ pnp_write_config(GPIO2345_DEV, 0xf2, 0x00); /* No inversion */
+
+ /* GPO40 GPO41 GPO42 GPO43 PO45 */
+ pnp_write_config(GPIO2345_DEV, 0xf4, 0xd0); /* dir of GPIO4 11010000 */
+ pnp_write_config(GPIO2345_DEV, 0xf5, 0x83); /* data */
+ pnp_write_config(GPIO2345_DEV, 0xf6, 0x00); /* No inversion */
+
+ pnp_write_config(GPIO2345_DEV, 0xf7, 0x00); /* MFC */
+ pnp_write_config(GPIO2345_DEV, 0xf8, 0x00); /* MFC */
+ pnp_write_config(GPIO2345_DEV, 0xfe, 0x07); /* trig type */
+ pnp_exit_ext_func_mode(GPIO2345_DEV);
+}
+
+void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
+{
+ static const u16 spd_addr[] = { DIMM0, 0, 0, 0, DIMM1, 0, 0, 0, };
+ int needs_reset = 0;
+ u32 bsp_apicid = 0;
+ msr_t msr;
+ struct cpuid_result cpuid1;
+ struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
+
+ if (!cpu_init_detectedx && boot_cpu()) {
+ /* Nothing special needs to be done to find bus 0 */
+ /* Allow the HT devices to be found */
+ enumerate_ht_chain();
+
+ /* sb700_lpc_port80(); */
+ sb700_pci_port80();
+ }
+
+ if (bist == 0) {
+ bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
+ }
+
+ enable_rs780_dev8();
+ sb700_lpc_init();
+
+ sio_init();
+ w83627dhg_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
+ uart_init();
+ console_init();
+
+ /* Halt if there was a built in self test failure */
+ report_bist_failure(bist);
+ printk(BIOS_DEBUG, "bsp_apicid=0x%x\n", bsp_apicid);
+
+ setup_939a785gmh_resource_map();
+
+ setup_coherent_ht_domain();
+
+#if CONFIG_LOGICAL_CPUS==1
+ /* It is said that we should start core1 after all core0 launched */
+ wait_all_core0_started();
+ start_other_cores();
+#endif
+ wait_all_aps_started(bsp_apicid);
+
+ ht_setup_chains_x(sysinfo);
+
+ /* run _early_setup before soft-reset. */
+ rs780_early_setup();
+ sb700_early_setup();
+
+ /* Check to see if processor is capable of changing FIDVID */
+ /* otherwise it will throw a GP# when reading FIDVID_STATUS */
+ cpuid1 = cpuid(0x80000007);
+ if( (cpuid1.edx & 0x6) == 0x6 ) {
+
+ /* Read FIDVID_STATUS */
+ msr=rdmsr(0xc0010042);
+ printk(BIOS_DEBUG, "begin msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo);
+
+ enable_fid_change();
+ enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn);
+ init_fidvid_bsp(bsp_apicid);
+
+ /* show final fid and vid */
+ msr=rdmsr(0xc0010042);
+ printk(BIOS_DEBUG, "end msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo);
+
+ } else {
+ printk(BIOS_DEBUG, "Changing FIDVID not supported\n");
+ }
+
+ needs_reset = optimize_link_coherent_ht();
+ needs_reset |= optimize_link_incoherent_ht(sysinfo);
+ rs780_htinit();
+ printk(BIOS_DEBUG, "needs_reset=0x%x\n", needs_reset);
+
+ if (needs_reset) {
+ print_info("ht reset -\n");
+ soft_reset();
+ }
+
+ allow_all_aps_stop(bsp_apicid);
+
+ /* It's the time to set ctrl now; */
+ printk(BIOS_DEBUG, "sysinfo->nodes: %2x sysinfo->ctrl: %p spd_addr: %p\n",
+ sysinfo->nodes, sysinfo->ctrl, spd_addr);
+ fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr);
+ sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo);
+
+ rs780_before_pci_init();
+ sb700_before_pci_init();
+
+ post_cache_as_ram();
+}
+
--- /dev/null
+##
+## This file is part of the coreboot project.
+##
+## Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+##
+
+choice
+ prompt "Mainboard model"
+ depends on VENDOR_ASROCK
+
+source "src/mainboard/asrock/939a785gmh/Kconfig"
+
+endchoice
+
projects / coreboot.git / commitdiff