flashrom: Board enable support for HP DL145 G3.

This is a BCM5785 based machine, WP# and TLB# need to be deasserted using
GPIO 2 and 5 from the PM registers of the southbridge.
This is very similar to the x3455 implementation.

Signed-off-by: Mondrian Nuessle <nuessle@uni-hd.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4031 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

diff --git a/util/flashrom/board_enable.c b/util/flashrom/board_enable.c
index fc30b788660cdbf076b71c359817a38c8c5bd047..00af1e87daf8a5045a18060375d23ac21be052e7 100644 (file)
--- a/util/flashrom/board_enable.c
+++ b/util/flashrom/board_enable.c
@@ -329,6 +329,19 @@ static int board_ibm_x3455(const char *name)
        return 0;
 }
 
+static int board_hp_dl145_g3_enable(const char *name)
+{
+       uint8_t byte;
+
+       /* Set GPIO lines in the Broadcom HT-1000 southbridge. */
+       OUTB(0x44, 0xcd6);      /* GPIO 0 reg from PM regs */
+       byte = INB(0xcd7);
+       /* Set GPIO 2 and 5 high, connected to flash WP# and TBL# pins. */
+       OUTB(byte | 0x24, 0xcd7);
+
+       return 0;
+}
+
 /**
  * Suited for EPoX EP-BX3, and maybe some other Intel 440BX based boards.
  */
@@ -1013,6 +1026,20 @@ struct board_pciid_enable board_pciid_enables[] = {
                .name                   = "MSI MS-7046",
                .enable                 = ich6_gpio19_raise,
        },
+       {
+               .first_vendor           = 0x1166,
+               .first_device           = 0x0223,
+               .first_card_vendor      = 0x103c,
+               .first_card_device      = 0x320d,
+               .second_vendor          = 0x102b,
+               .second_device          = 0x0522,
+               .second_card_vendor     = 0x103c,
+               .second_card_device     = 0x31fa,
+               .lb_vendor              = "hp",
+               .lb_part                = "dl145_g3",
+               .name                   = "HP DL145 G3",
+               .enable                 = board_hp_dl145_g3_enable,
+       },
        {
                .first_vendor           = 0,
                .first_device           = 0,