-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2010 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-/*
-Scope (_SB) {
- Device(PCI0) {
- Device(IDEC) {
- Name(_ADR, 0x00140001)
- #include "ide.asl"
- }
- }
-}
-*/
-
-/* Some timing tables */
-Name(UDTT, Package(){ /* Udma timing table */
- 120, 90, 60, 45, 30, 20, 15, 0 /* UDMA modes 0 -> 6 */
-})
-
-Name(MDTT, Package(){ /* MWDma timing table */
- 480, 150, 120, 0 /* Legacy DMA modes 0 -> 2 */
-})
-
-Name(POTT, Package(){ /* Pio timing table */
- 600, 390, 270, 180, 120, 0 /* PIO modes 0 -> 4 */
-})
-
-/* Some timing register value tables */
-Name(MDRT, Package(){ /* MWDma timing register table */
- 0x77, 0x21, 0x20, 0xFF /* Legacy DMA modes 0 -> 2 */
-})
-
-Name(PORT, Package(){
- 0x99, 0x47, 0x34, 0x22, 0x20, 0x99 /* PIO modes 0 -> 4 */
-})
-
-OperationRegion(ICRG, PCI_Config, 0x40, 0x20) /* ide control registers */
- Field(ICRG, AnyAcc, NoLock, Preserve)
-{
- PPTS, 8, /* Primary PIO Slave Timing */
- PPTM, 8, /* Primary PIO Master Timing */
- OFFSET(0x04), PMTS, 8, /* Primary MWDMA Slave Timing */
- PMTM, 8, /* Primary MWDMA Master Timing */
- OFFSET(0x08), PPCR, 8, /* Primary PIO Control */
- OFFSET(0x0A), PPMM, 4, /* Primary PIO master Mode */
- PPSM, 4, /* Primary PIO slave Mode */
- OFFSET(0x14), PDCR, 2, /* Primary UDMA Control */
- OFFSET(0x16), PDMM, 4, /* Primary UltraDMA Mode */
- PDSM, 4, /* Primary UltraDMA Mode */
-}
-
-Method(GTTM, 1) /* get total time*/
-{
- Store(And(Arg0, 0x0F), Local0) /* Recovery Width */
- Increment(Local0)
- Store(ShiftRight(Arg0, 4), Local1) /* Command Width */
- Increment(Local1)
- Return(Multiply(30, Add(Local0, Local1)))
-}
-
-Device(PRID)
-{
- Name (_ADR, Zero)
- Method(_GTM, 0)
- {
- NAME(OTBF, Buffer(20) { /* out buffer */
- 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00
- })
-
- CreateDwordField(OTBF, 0, PSD0) /* PIO spd0 */
- CreateDwordField(OTBF, 4, DSD0) /* DMA spd0 */
- CreateDwordField(OTBF, 8, PSD1) /* PIO spd1 */
- CreateDwordField(OTBF, 12, DSD1) /* DMA spd1 */
- CreateDwordField(OTBF, 16, BFFG) /* buffer flags */
-
- /* Just return if the channel is disabled */
- If(And(PPCR, 0x01)) { /* primary PIO control */
- Return(OTBF)
- }
-
- /* Always tell them independent timing available and IOChannelReady used on both drives */
- Or(BFFG, 0x1A, BFFG)
-
- Store(GTTM(PPTM), PSD0) /* save total time of primary PIO master timming to PIO spd0 */
- Store(GTTM(PPTS), PSD1) /* save total time of primary PIO slave Timing to PIO spd1 */
-
- If(And(PDCR, 0x01)) { /* It's under UDMA mode */
- Or(BFFG, 0x01, BFFG)
- Store(DerefOf(Index(UDTT, PDMM)), DSD0)
- }
- Else {
- Store(GTTM(PMTM), DSD0) /* Primary MWDMA Master Timing, DmaSpd0 */
- }
-
- If(And(PDCR, 0x02)) { /* It's under UDMA mode */
- Or(BFFG, 0x04, BFFG)
- Store(DerefOf(Index(UDTT, PDSM)), DSD1)
- }
- Else {
- Store(GTTM(PMTS), DSD1) /* Primary MWDMA Slave Timing, DmaSpd0 */
- }
-
- Return(OTBF) /* out buffer */
- } /* End Method(_GTM) */
-
- Method(_STM, 3, NotSerialized)
- {
- NAME(INBF, Buffer(20) { /* in buffer */
- 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00
- })
-
- CreateDwordField(INBF, 0, PSD0) /* PIO spd0 */
- CreateDwordField(INBF, 4, DSD0) /* PIO spd0 */
- CreateDwordField(INBF, 8, PSD1) /* PIO spd1 */
- CreateDwordField(INBF, 12, DSD1) /* DMA spd1 */
- CreateDwordField(INBF, 16, BFFG) /*buffer flag */
-
- Store(Match(POTT, MLE, PSD0, MTR, 0, 0), Local0)
- Divide(Local0, 5, PPMM,) /* Primary PIO master Mode */
- Store(Match(POTT, MLE, PSD1, MTR, 0, 0), Local1)
- Divide(Local1, 5, PPSM,) /* Primary PIO slave Mode */
-
- Store(DerefOf(Index(PORT, Local0)), PPTM) /* Primary PIO Master Timing */
- Store(DerefOf(Index(PORT, Local1)), PPTS) /* Primary PIO Slave Timing */
-
- If(And(BFFG, 0x01)) { /* Drive 0 is under UDMA mode */
- Store(Match(UDTT, MLE, DSD0, MTR, 0, 0), Local0)
- Divide(Local0, 7, PDMM,)
- Or(PDCR, 0x01, PDCR)
- }
- Else {
- If(LNotEqual(DSD0, 0xFFFFFFFF)) {
- Store(Match(MDTT, MLE, DSD0, MTR, 0, 0), Local0)
- Store(DerefOf(Index(MDRT, Local0)), PMTM)
- }
- }
-
- If(And(BFFG, 0x04)) { /* Drive 1 is under UDMA mode */
- Store(Match(UDTT, MLE, DSD1, MTR, 0, 0), Local0)
- Divide(Local0, 7, PDSM,)
- Or(PDCR, 0x02, PDCR)
- }
- Else {
- If(LNotEqual(DSD1, 0xFFFFFFFF)) {
- Store(Match(MDTT, MLE, DSD1, MTR, 0, 0), Local0)
- Store(DerefOf(Index(MDRT, Local0)), PMTS)
- }
- }
- /* Return(INBF) */
- } /*End Method(_STM) */
- Device(MST)
- {
- Name(_ADR, 0)
- Method(_GTF) {
- Name(CMBF, Buffer(21) {
- 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF,
- 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5
- })
- CreateByteField(CMBF, 1, POMD)
- CreateByteField(CMBF, 8, DMMD)
- CreateByteField(CMBF, 5, CMDA)
- CreateByteField(CMBF, 12, CMDB)
- CreateByteField(CMBF, 19, CMDC)
-
- Store(0xA0, CMDA)
- Store(0xA0, CMDB)
- Store(0xA0, CMDC)
-
- Or(PPMM, 0x08, POMD)
-
- If(And(PDCR, 0x01)) {
- Or(PDMM, 0x40, DMMD)
- }
- Else {
- Store(Match
- (MDTT, MLE, GTTM(PMTM),
- MTR, 0, 0), Local0)
- If(LLess(Local0, 3)) {
- Or(0x20, Local0, DMMD)
- }
- }
- Return(CMBF)
- }
- } /* End Device(MST) */
-
- Device(SLAV)
- {
- Name(_ADR, 1)
- Method(_GTF) {
- Name(CMBF, Buffer(21) {
- 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF,
- 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5
- })
- CreateByteField(CMBF, 1, POMD)
- CreateByteField(CMBF, 8, DMMD)
- CreateByteField(CMBF, 5, CMDA)
- CreateByteField(CMBF, 12, CMDB)
- CreateByteField(CMBF, 19, CMDC)
-
- Store(0xB0, CMDA)
- Store(0xB0, CMDB)
- Store(0xB0, CMDC)
-
- Or(PPSM, 0x08, POMD)
-
- If(And(PDCR, 0x02)) {
- Or(PDSM, 0x40, DMMD)
- }
- Else {
- Store(Match
- (MDTT, MLE, GTTM(PMTS),
- MTR, 0, 0), Local0)
- If(LLess(Local0, 3)) {
- Or(0x20, Local0, DMMD)
- }
- }
- Return(CMBF)
- }
- } /* End Device(SLAV) */
-}
)
{ /* Start of ASL file */
/* #include "acpi/debug.asl" */ /* Include global debug methods if needed */
+ #include "northbridge/amd/amdk8/amdk8_util.asl"
- /* Data to be patched by the BIOS during POST */
- /* FIXME the patching is not done yet! */
- /* Memory related values */
- Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */
- Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */
- Name(PBLN, 0x0) /* Length of BIOS area */
-
- Name(PCBA, 0xE0000000) /* Base address of PCIe config space */
Name(HPBA, 0xFED00000) /* Base address of HPET table */
Name(SSFG, 0x0D) /* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */
- /* USB overcurrent mapping pins. */
- Name(UOM0, 0)
- Name(UOM1, 2)
- Name(UOM2, 0)
- Name(UOM3, 7)
- Name(UOM4, 2)
- Name(UOM5, 2)
- Name(UOM6, 6)
- Name(UOM7, 2)
- Name(UOM8, 6)
- Name(UOM9, 6)
-
- /* Some global data */
- Name(OSTP, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */
- Name(OSV, Ones) /* Assume nothing */
Name(PMOD, One) /* Assume APIC */
/* PIC IRQ mapping registers, C00h-C01h */
PINH, 0x00000008, /* Index C */
}
- /* PCI Error control register */
- OperationRegion(PERC, SystemIO, 0x00000C14, 0x00000001)
- Field(PERC, ByteAcc, NoLock, Preserve) {
- SENS, 0x00000001,
- PENS, 0x00000001,
- SENE, 0x00000001,
- PENE, 0x00000001,
- }
-
- /* Client Management index/data registers */
- OperationRegion(CMT, SystemIO, 0x00000C50, 0x00000002)
- Field(CMT, ByteAcc, NoLock, Preserve) {
- CMTI, 8,
- /* Client Management Data register */
- G64E, 1,
- G64O, 1,
- G32O, 2,
- , 2,
- GPSL, 2,
- }
-
- /* GPM Port register */
- OperationRegion(GPT, SystemIO, 0x00000C52, 0x00000001)
- Field(GPT, ByteAcc, NoLock, Preserve) {
- GPB0,1,
- GPB1,1,
- GPB2,1,
- GPB3,1,
- GPB4,1,
- GPB5,1,
- GPB6,1,
- GPB7,1,
- }
-
- /* Flash ROM program enable register */
- OperationRegion(FRE, SystemIO, 0x00000C6F, 0x00000001)
- Field(FRE, ByteAcc, NoLock, Preserve) {
- , 0x00000006,
- FLRE, 0x00000001,
- }
-
- /* PM2 index/data registers */
- OperationRegion(PM2R, SystemIO, 0x00000CD0, 0x00000002)
- Field(PM2R, ByteAcc, NoLock, Preserve) {
- PM2I, 0x00000008,
- PM2D, 0x00000008,
- }
-
- /* Power Management I/O registers */
- OperationRegion(PIOR, SystemIO, 0x00000CD6, 0x00000002)
- Field(PIOR, ByteAcc, NoLock, Preserve) {
- PIOI, 0x00000008,
- PIOD, 0x00000008,
- }
- IndexField (PIOI, PIOD, ByteAcc, NoLock, Preserve) {
- Offset(0x00), /* MiscControl */
- , 1,
- T1EE, 1,
- T2EE, 1,
- Offset(0x01), /* MiscStatus */
- , 1,
- T1E, 1,
- T2E, 1,
- Offset(0x04), /* SmiWakeUpEventEnable3 */
- , 7,
- SSEN, 1,
- Offset(0x07), /* SmiWakeUpEventStatus3 */
- , 7,
- CSSM, 1,
- Offset(0x10), /* AcpiEnable */
- , 6,
- PWDE, 1,
- Offset(0x1C), /* ProgramIoEnable */
- , 3,
- MKME, 1,
- IO3E, 1,
- IO2E, 1,
- IO1E, 1,
- IO0E, 1,
- Offset(0x1D), /* IOMonitorStatus */
- , 3,
- MKMS, 1,
- IO3S, 1,
- IO2S, 1,
- IO1S, 1,
- IO0S,1,
- Offset(0x20), /* AcpiPmEvtBlk */
- APEB, 16,
- Offset(0x36), /* GEvtLevelConfig */
- , 6,
- ELC6, 1,
- ELC7, 1,
- Offset(0x37), /* GPMLevelConfig0 */
- , 3,
- PLC0, 1,
- PLC1, 1,
- PLC2, 1,
- PLC3, 1,
- PLC8, 1,
- Offset(0x38), /* GPMLevelConfig1 */
- , 1,
- PLC4, 1,
- PLC5, 1,
- , 1,
- PLC6, 1,
- PLC7, 1,
- Offset(0x3B), /* PMEStatus1 */
- GP0S, 1,
- GM4S, 1,
- GM5S, 1,
- APS, 1,
- GM6S, 1,
- GM7S, 1,
- GP2S, 1,
- STSS, 1,
- Offset(0x55), /* SoftPciRst */
- SPRE, 1,
- , 1,
- , 1,
- PNAT, 1,
- PWMK, 1,
- PWNS, 1,
-
- /* Offset(0x61), */ /* Options_1 */
- /* ,7, */
- /* R617,1, */
-
- Offset(0x65), /* UsbPMControl */
- , 4,
- URRE, 1,
- Offset(0x68), /* MiscEnable68 */
- , 3,
- TMTE, 1,
- , 1,
- Offset(0x92), /* GEVENTIN */
- , 7,
- E7IS, 1,
- Offset(0x96), /* GPM98IN */
- G8IS, 1,
- G9IS, 1,
- Offset(0x9A), /* EnhanceControl */
- ,7,
- HPDE, 1,
- Offset(0xA8), /* PIO7654Enable */
- IO4E, 1,
- IO5E, 1,
- IO6E, 1,
- IO7E, 1,
- Offset(0xA9), /* PIO7654Status */
- IO4S, 1,
- IO5S, 1,
- IO6S, 1,
- IO7S, 1,
- }
-
- /* PM1 Event Block
- * First word is PM1_Status, Second word is PM1_Enable
- */
- OperationRegion(P1EB, SystemIO, APEB, 0x04)
- Field(P1EB, ByteAcc, NoLock, Preserve) {
- TMST, 1,
- , 3,
- BMST, 1,
- GBST, 1,
- Offset(0x01),
- PBST, 1,
- , 1,
- RTST, 1,
- , 3,
- PWST, 1,
- SPWS, 1,
- Offset(0x02),
- TMEN, 1,
- , 4,
- GBEN, 1,
- Offset(0x03),
- PBEN, 1,
- , 1,
- RTEN, 1,
- , 3,
- PWDA, 1,
- }
-
- Scope(\_SB) {
- /* PCIe Configuration Space for 16 busses */
- OperationRegion(PCFG, SystemMemory, PCBA, 0x01000000) /* Each bus consumes 1MB */
- Field(PCFG, ByteAcc, NoLock, Preserve) {
- /* Byte offsets are computed using the following technique:
- * ((bus number + 1) * ((device number * 8) * 4096)) + register offset
- * The 8 comes from 8 functions per device, and 4096 bytes per function config space
- */
- Offset(0x00090024), /* Byte offset to SATA register 24h - Bus 0, Device 18, Function 0 */
- STB5, 32,
- Offset(0x00098042), /* Byte offset to OHCI0 register 42h - Bus 0, Device 19, Function 0 */
- PT0D, 1,
- PT1D, 1,
- PT2D, 1,
- PT3D, 1,
- PT4D, 1,
- PT5D, 1,
- PT6D, 1,
- PT7D, 1,
- PT8D, 1,
- PT9D, 1,
- Offset(0x000A0004), /* Byte offset to SMBUS register 4h - Bus 0, Device 20, Function 0 */
- SBIE, 1,
- SBME, 1,
- Offset(0x000A0008), /* Byte offset to SMBUS register 8h - Bus 0, Device 20, Function 0 */
- SBRI, 8,
- Offset(0x000A0014), /* Byte offset to SMBUS register 14h - Bus 0, Device 20, Function 0 */
- SBB1, 32,
- Offset(0x000A0078), /* Byte offset to SMBUS register 78h - Bus 0, Device 20, Function 0 */
- ,14,
- P92E, 1, /* Port92 decode enable */
- }
-
- OperationRegion(SB5, SystemMemory, STB5, 0x1000)
- Field(SB5, AnyAcc, NoLock, Preserve){
- /* Port 0 */
- Offset(0x120), /* Port 0 Task file status */
- P0ER, 1,
- , 2,
- P0DQ, 1,
- , 3,
- P0BY, 1,
- Offset(0x128), /* Port 0 Serial ATA status */
- P0DD, 4,
- , 4,
- P0IS, 4,
- Offset(0x12C), /* Port 0 Serial ATA control */
- P0DI, 4,
- Offset(0x130), /* Port 0 Serial ATA error */
- , 16,
- P0PR, 1,
-
- /* Port 1 */
- offset(0x1A0), /* Port 1 Task file status */
- P1ER, 1,
- , 2,
- P1DQ, 1,
- , 3,
- P1BY, 1,
- Offset(0x1A8), /* Port 1 Serial ATA status */
- P1DD, 4,
- , 4,
- P1IS, 4,
- Offset(0x1AC), /* Port 1 Serial ATA control */
- P1DI, 4,
- Offset(0x1B0), /* Port 1 Serial ATA error */
- , 16,
- P1PR, 1,
-
- /* Port 2 */
- Offset(0x220), /* Port 2 Task file status */
- P2ER, 1,
- , 2,
- P2DQ, 1,
- , 3,
- P2BY, 1,
- Offset(0x228), /* Port 2 Serial ATA status */
- P2DD, 4,
- , 4,
- P2IS, 4,
- Offset(0x22C), /* Port 2 Serial ATA control */
- P2DI, 4,
- Offset(0x230), /* Port 2 Serial ATA error */
- , 16,
- P2PR, 1,
-
- /* Port 3 */
- Offset(0x2A0), /* Port 3 Task file status */
- P3ER, 1,
- , 2,
- P3DQ, 1,
- , 3,
- P3BY, 1,
- Offset(0x2A8), /* Port 3 Serial ATA status */
- P3DD, 4,
- , 4,
- P3IS, 4,
- Offset(0x2AC), /* Port 3 Serial ATA control */
- P3DI, 4,
- Offset(0x2B0), /* Port 3 Serial ATA error */
- , 16,
- P3PR, 1,
- }
- }
-
-
#include "acpi/routing.asl"
Scope(\_SB) {
- Method(CkOT, 0){
-
- if(LNotEqual(OSTP, Ones)) {Return(OSTP)} /* OS version was already detected */
-
- if(CondRefOf(\_OSI,Local1))
- {
- Store(1, OSTP) /* Assume some form of XP */
- if (\_OSI("Windows 2006")) /* Vista */
- {
- Store(2, OSTP)
- }
- } else {
- If(WCMP(\_OS,"Linux")) {
- Store(3, OSTP) /* Linux */
- } Else {
- Store(4, OSTP) /* Gotta be WinCE */
- }
- }
- Return(OSTP)
- }
-
Method(_PIC, 0x01, NotSerialized)
{
If (Arg0)
}
Store(Arg0, PMOD)
}
+
Method(CIRQ, 0x00, NotSerialized){
Store(0, PINA)
Store(0, PINB)
Name(CSMS, 0) /* Current System State */
/* Wake status package */
- Name(WKST,Package(){Zero, Zero})
-
- /*
- * \_PTS - Prepare to Sleep method
- *
- * Entry:
- * Arg0=The value of the sleeping state S1=1, S2=2, etc
- *
- * Exit:
- * -none-
- *
- * The _PTS control method is executed at the beginning of the sleep process
- * for S1-S5. The sleeping value is passed to the _PTS control method. This
- * control method may be executed a relatively long time before entering the
- * sleep state and the OS may abort the operation without notification to
- * the ACPI driver. This method cannot modify the configuration or power
- * state of any device in the system.
- */
- Method(\_PTS, 1) {
- /* DBGO("\\_PTS\n") */
- /* DBGO("From S0 to S") */
- /* DBGO(Arg0) */
- /* DBGO("\n") */
-
- /* Don't allow PCIRST# to reset USB */
- if (LEqual(Arg0,3)){
- Store(0,URRE)
- }
-
- /* Clear sleep SMI status flag and enable sleep SMI trap. */
- /*Store(One, CSSM)
- Store(One, SSEN)*/
-
- /* On older chips, clear PciExpWakeDisEn */
- /*if (LLessEqual(\_SB.SBRI, 0x13)) {
- * Store(0,\_SB.PWDE)
- *}
- */
-
- /* Clear wake status structure. */
- Store(0, Index(WKST,0))
- Store(0, Index(WKST,1))
- \_SB.PCI0.SIOS (Arg0)
- } /* End Method(\_PTS) */
-
- /*
- * The following method results in a "not a valid reserved NameSeg"
- * warning so I have commented it out for the duration. It isn't
- * used, so it could be removed.
- *
- *
- * \_GTS OEM Going To Sleep method
- *
- * Entry:
- * Arg0=The value of the sleeping state S1=1, S2=2
- *
- * Exit:
- * -none-
- *
- * Method(\_GTS, 1) {
- * DBGO("\\_GTS\n")
- * DBGO("From S0 to S")
- * DBGO(Arg0)
- * DBGO("\n")
- * }
- */
-
- /*
- * \_BFS OEM Back From Sleep method
- *
- * Entry:
- * Arg0=The value of the sleeping state S1=1, S2=2
- *
- * Exit:
- * -none-
- */
- Method(\_BFS, 1) {
- /* DBGO("\\_BFS\n") */
- /* DBGO("From S") */
- /* DBGO(Arg0) */
- /* DBGO(" to S0\n") */
- }
-
- /*
- * \_WAK System Wake method
- *
- * Entry:
- * Arg0=The value of the sleeping state S1=1, S2=2
- *
- * Exit:
- * Return package of 2 DWords
- * Dword 1 - Status
- * 0x00000000 wake succeeded
- * 0x00000001 Wake was signaled but failed due to lack of power
- * 0x00000002 Wake was signaled but failed due to thermal condition
- * Dword 2 - Power Supply state
- * if non-zero the effective S-state the power supply entered
- */
- Method(\_WAK, 1) {
- /* DBGO("\\_WAK\n") */
- /* DBGO("From S") */
- /* DBGO(Arg0) */
- /* DBGO(" to S0\n") */
-
- /* Re-enable HPET */
- Store(1,HPDE)
-
- /* Restore PCIRST# so it resets USB */
- if (LEqual(Arg0,3)){
- Store(1,URRE)
- }
- /* Arbitrarily clear PciExpWakeStatus */
- Store(PWST, PWST)
-
- /* if(DeRefOf(Index(WKST,0))) {
- * Store(0, Index(WKST,1))
- * } else {
- * Store(Arg0, Index(WKST,1))
- * }
- */
- \_SB.PCI0.SIOW (Arg0)
- Return(WKST)
- } /* End Method(\_WAK) */
-
- Scope(\_GPE) { /* Start Scope GPE */
- /* General event 0 */
- /* Method(_L00) {
- * DBGO("\\_GPE\\_L00\n")
- * }
- */
-
- /* General event 1 */
- /* Method(_L01) {
- * DBGO("\\_GPE\\_L00\n")
- * }
- */
-
- /* General event 2 */
- /* Method(_L02) {
- * DBGO("\\_GPE\\_L00\n")
- * }
- */
-
- /* General event 3 */
- Method(_L03) {
- /* DBGO("\\_GPE\\_L00\n") */
- Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
- }
-
- /* General event 4 */
- /* Method(_L04) {
- * DBGO("\\_GPE\\_L00\n")
- * }
- */
-
- /* General event 5 */
- /* Method(_L05) {
- * DBGO("\\_GPE\\_L00\n")
- * }
- */
-
- /* General event 6 - Used for GPM6, moved to USB.asl */
- /* Method(_L06) {
- * DBGO("\\_GPE\\_L00\n")
- * }
- */
-
- /* General event 7 - Used for GPM7, moved to USB.asl */
- /* Method(_L07) {
- * DBGO("\\_GPE\\_L07\n")
- * }
- */
-
- /* Legacy PM event */
- Method(_L08) {
- /* DBGO("\\_GPE\\_L08\n") */
- }
-
- /* Temp warning (TWarn) event */
- Method(_L09) {
- /* DBGO("\\_GPE\\_L09\n") */
- Notify (\_TZ.TZ00, 0x80)
- }
-
- /* Reserved */
- /* Method(_L0A) {
- * DBGO("\\_GPE\\_L0A\n")
- * }
- */
-
- /* USB controller PME# */
- Method(_L0B) {
- /* DBGO("\\_GPE\\_L0B\n") */
- Notify(\_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */
- Notify(\_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */
- Notify(\_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */
- Notify(\_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */
- Notify(\_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */
- Notify(\_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */
- Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
- }
-
- /* AC97 controller PME# */
- /* Method(_L0C) {
- * DBGO("\\_GPE\\_L0C\n")
- * }
- */
-
- /* OtherTherm PME# */
- /* Method(_L0D) {
- * DBGO("\\_GPE\\_L0D\n")
- * }
- */
-
- /* GPM9 SCI event - Moved to USB.asl */
- /* Method(_L0E) {
- * DBGO("\\_GPE\\_L0E\n")
- * }
- */
-
- /* PCIe HotPlug event */
- /* Method(_L0F) {
- * DBGO("\\_GPE\\_L0F\n")
- * }
- */
-
- /* ExtEvent0 SCI event */
- Method(_L10) {
- /* DBGO("\\_GPE\\_L10\n") */
- }
-
-
- /* ExtEvent1 SCI event */
- Method(_L11) {
- /* DBGO("\\_GPE\\_L11\n") */
- }
-
- /* PCIe PME# event */
- /* Method(_L12) {
- * DBGO("\\_GPE\\_L12\n")
- * }
- */
-
- /* GPM0 SCI event - Moved to USB.asl */
- /* Method(_L13) {
- * DBGO("\\_GPE\\_L13\n")
- * }
- */
-
- /* GPM1 SCI event - Moved to USB.asl */
- /* Method(_L14) {
- * DBGO("\\_GPE\\_L14\n")
- * }
- */
-
- /* GPM2 SCI event - Moved to USB.asl */
- /* Method(_L15) {
- * DBGO("\\_GPE\\_L15\n")
- * }
- */
-
- /* GPM3 SCI event - Moved to USB.asl */
- /* Method(_L16) {
- * DBGO("\\_GPE\\_L16\n")
- * }
- */
-
- /* GPM8 SCI event - Moved to USB.asl */
- /* Method(_L17) {
- * DBGO("\\_GPE\\_L17\n")
- * }
- */
-
- /* GPIO0 or GEvent8 event */
- Method(_L18) {
- /* DBGO("\\_GPE\\_L18\n") */
- Notify(\_SB.PCI0.PBR2, 0x02) /* NOTIFY_DEVICE_WAKE */
- Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
- }
-
- /* GPM4 SCI event - Moved to USB.asl */
- /* Method(_L19) {
- * DBGO("\\_GPE\\_L19\n")
- * }
- */
-
- /* GPM5 SCI event - Moved to USB.asl */
- /* Method(_L1A) {
- * DBGO("\\_GPE\\_L1A\n")
- * }
- */
-
- /* Azalia SCI event */
- Method(_L1B) {
- /* DBGO("\\_GPE\\_L1B\n") */
- Notify(\_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */
- Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
- }
-
- /* GPM6 SCI event - Reassigned to _L06 */
- /* Method(_L1C) {
- * DBGO("\\_GPE\\_L1C\n")
- * }
- */
-
- /* GPM7 SCI event - Reassigned to _L07 */
- /* Method(_L1D) {
- * DBGO("\\_GPE\\_L1D\n")
- * }
- */
-
- /* GPIO2 or GPIO66 SCI event */
- /* Method(_L1E) {
- * DBGO("\\_GPE\\_L1E\n")
- * }
- */
-
- /* SATA SCI event - Moved to sata.asl */
- /* Method(_L1F) {
- * DBGO("\\_GPE\\_L1F\n")
- * }
- */
-
- } /* End Scope GPE */
-
- #include "acpi/usb.asl"
+ Name(WKST,Package(){Zero, Zero})
/* South Bridge */
Scope(\_SB) { /* Start \_SB scope */
/* _SB.PCI0 */
/* Note: Only need HID on Primary Bus */
Device(PCI0) {
- External (TOM1)
- External (TOM2) /* (<real tom2> >> 20) to make it fit into 32 bit for XP */
+
Name(_HID, EISAID("PNP0A03"))
Name(_ADR, 0x00180000) /* Dev# = BSP Dev#, Func# = 0 */
Method(_BBN, 0) { /* Bus number = 0 */
}
}
- /* Describe the Southbridge devices */
- Device(STCR) {
- Name(_ADR, 0x00110000)
- #include "acpi/sata.asl"
- } /* end STCR */
-
- Device(UOH1) {
- Name(_ADR, 0x00130000)
- Name(_PRW, Package() {0x0B, 3})
- } /* end UOH1 */
-
- Device(UOH2) {
- Name(_ADR, 0x00130001)
- Name(_PRW, Package() {0x0B, 3})
- } /* end UOH2 */
-
- Device(UOH3) {
- Name(_ADR, 0x00130002)
- Name(_PRW, Package() {0x0B, 3})
- } /* end UOH3 */
-
- Device(UOH4) {
- Name(_ADR, 0x00130003)
- Name(_PRW, Package() {0x0B, 3})
- } /* end UOH4 */
-
- Device(UOH5) {
- Name(_ADR, 0x00130004)
- Name(_PRW, Package() {0x0B, 3})
- } /* end UOH5 */
-
- Device(UEH1) {
- Name(_ADR, 0x00130005)
- Name(_PRW, Package() {0x0B, 3})
- } /* end UEH1 */
-
- Device(SBUS) {
- Name(_ADR, 0x00140000)
- } /* end SBUS */
-
- /* Primary (and only) IDE channel */
- Device(IDEC) {
- Name(_ADR, 0x00140001)
- #include "acpi/ide.asl"
- } /* end IDEC */
-
- Device(AZHD) {
- Name(_ADR, 0x00140002)
- OperationRegion(AZPD, PCI_Config, 0x00, 0x100)
- Field(AZPD, AnyAcc, NoLock, Preserve) {
- offset (0x42),
- NSDI, 1,
- NSDO, 1,
- NSEN, 1,
- offset (0x44),
- IPCR, 4,
- offset (0x54),
- PWST, 2,
- , 6,
- PMEB, 1,
- , 6,
- PMST, 1,
- offset (0x62),
- MMCR, 1,
- offset (0x64),
- MMLA, 32,
- offset (0x68),
- MMHA, 32,
- offset (0x6C),
- MMDT, 16,
- }
-
- Method(_INI) {
- If(LEqual(OSTP,3)){ /* If we are running Linux */
- Store(zero, NSEN)
- Store(one, NSDO)
- Store(one, NSDI)
- }
- }
- } /* end AZHD */
-
Device(LIBR) {
Name(_ADR, 0x00140003)
/* Method(_INI) {
} /* End Device(_SB.PCI0.LpcIsaBr.COPR) */
} /* end LIBR */
- Device(HPBR) {
- Name(_ADR, 0x00140004)
- } /* end HostPciBr */
+ External (BUSN)
+ External (MMIO)
+ External (PCIO)
+ External (SBLK)
+ External (TOM1)
+ External (HCLK)
+ External (SBDN)
+ External (HCDN)
- Device(ACAD) {
- Name(_ADR, 0x00140005)
- } /* end Ac97audio */
-
- Device(ACMD) {
- Name(_ADR, 0x00140006)
- } /* end Ac97modem */
-
- /* ITE8718 Support */
- OperationRegion (IOID, SystemIO, 0x2E, 0x02) /* sometimes it is 0x4E */
- Field (IOID, ByteAcc, NoLock, Preserve)
- {
- SIOI, 8, SIOD, 8 /* 0x2E and 0x2F */
- }
-
- IndexField (SIOI, SIOD, ByteAcc, NoLock, Preserve)
- {
- Offset (0x07),
- LDN, 8, /* Logical Device Number */
- Offset (0x20),
- CID1, 8, /* Chip ID Byte 1, 0x87 */
- CID2, 8, /* Chip ID Byte 2, 0x12 */
- Offset (0x30),
- ACTR, 8, /* Function activate */
- Offset (0xF0),
- APC0, 8, /* APC/PME Event Enable Register */
- APC1, 8, /* APC/PME Status Register */
- APC2, 8, /* APC/PME Control Register 1 */
- APC3, 8, /* Environment Controller Special Configuration Register */
- APC4, 8 /* APC/PME Control Register 2 */
- }
-
- /* Enter the 8718 MB PnP Mode */
- Method (EPNP)
- {
- Store(0x87, SIOI)
- Store(0x01, SIOI)
- Store(0x55, SIOI)
- Store(0x55, SIOI) /* 8718 magic number */
- }
- /* Exit the 8718 MB PnP Mode */
- Method (XPNP)
+ Method (_CRS, 0, NotSerialized)
{
- Store (0x02, SIOI)
- Store (0x02, SIOD)
- }
- /*
- * Keyboard PME is routed to SB600 Gevent3. We can wake
- * up the system by pressing the key.
- */
- Method (SIOS, 1)
- {
- /* We only enable KBD PME for S5. */
- If (LLess (Arg0, 0x05))
- {
- EPNP()
- /* DBGO("8718F\n") */
-
- Store (0x4, LDN)
- Store (One, ACTR) /* Enable EC */
- /*
- Store (0x4, LDN)
- Store (0x04, APC4)
- */ /* falling edge. which mode? Not sure. */
-
- Store (0x4, LDN)
- Store (0x08, APC1) /* clear PME status, Use 0x18 for mouse & KBD */
- Store (0x4, LDN)
- Store (0x08, APC0) /* enable PME, Use 0x18 for mouse & KBD */
-
- XPNP()
- }
- }
- Method (SIOW, 1)
- {
- EPNP()
- Store (0x4, LDN)
- Store (Zero, APC0) /* disable keyboard PME */
- Store (0x4, LDN)
- Store (0xFF, APC1) /* clear keyboard PME status */
- XPNP()
- }
-
- Name(CRES, ResourceTemplate() {
- IO(Decode16, 0x0CF8, 0x0CF8, 1, 8)
-
- WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
- 0x0000, /* address granularity */
- 0x0000, /* range minimum */
- 0x0CF7, /* range maximum */
- 0x0000, /* translation */
- 0x0CF8 /* length */
- )
-
- WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
- 0x0000, /* address granularity */
- 0x0D00, /* range minimum */
- 0xFFFF, /* range maximum */
- 0x0000, /* translation */
- 0xF300 /* length */
+ Name (BUF0, ResourceTemplate ()
+ {
+ IO (Decode16,
+ 0x0CF8, // Address Range Minimum
+ 0x0CF8, // Address Range Maximum
+ 0x01, // Address Alignment
+ 0x08, // Address Length
)
+ WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
+ 0x0000, // Address Space Granularity
+ 0x0000, // Address Range Minimum
+ 0x0CF7, // Address Range Maximum
+ 0x0000, // Address Translation Offset
+ 0x0CF8, // Address Length
+ ,, , TypeStatic)
+ })
+ /* Methods bellow use SSDT to get actual MMIO regs
+ The IO ports are from 0xd00, optionally an VGA,
+ otherwise the info from MMIO is used.
+ */
+ Concatenate (\_SB.GMEM (0x00, \_SB.PCI0.SBLK), BUF0, Local1)
+ Concatenate (\_SB.GIOR (0x00, \_SB.PCI0.SBLK), Local1, Local2)
+ Concatenate (\_SB.GWBN (0x00, \_SB.PCI0.SBLK), Local2, Local3)
+ Return (Local3)
+ }
- Memory32Fixed(READWRITE, 0, 0xA0000, BSMM)
- Memory32Fixed(READONLY, 0x000A0000, 0x00020000, VGAM) /* VGA memory space */
- Memory32Fixed(READONLY, 0x000C0000, 0x00020000, EMM1) /* Assume C0000-E0000 empty */
- Memory32Fixed(READONLY, 0x000E0000, 0x00020000, RDBS) /* BIOS ROM area */
-
- /* DRAM Memory from 1MB to TopMem */
- Memory32Fixed(READWRITE, 0x00100000, 0, DMLO) /* 1MB to TopMem */
-
- /* BIOS space just below 4GB */
- DWORDMemory(
- ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite,
- 0x00, /* Granularity */
- 0x00000000, /* Min */
- 0x00000000, /* Max */
- 0x00000000, /* Translation */
- 0x00000001, /* Max-Min, RLEN */
- ,,
- PCBM
- )
-
- /* DRAM memory from 4GB to TopMem2 */
- QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite,
- 0x00000000, /* Granularity */
- 0x00000000, /* Min */
- 0x00000000, /* Max */
- 0x00000000, /* Translation */
- 0x00000001, /* Max-Min, RLEN */
- ,,
- DMHI
- )
-
- /* BIOS space just below 16EB */
- QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite,
- 0x00000000, /* Granularity */
- 0x00000000, /* Min */
- 0x00000000, /* Max */
- 0x00000000, /* Translation */
- 0x00000001, /* Max-Min, RLEN */
- ,,
- PEBM
- )
-
- }) /* End Name(_SB.PCI0.CRES) */
-
- Method(_CRS, 0) {
- /* DBGO("\\_SB\\PCI0\\_CRS\n") */
-
- CreateDWordField(CRES, ^EMM1._BAS, EM1B)
- CreateDWordField(CRES, ^EMM1._LEN, EM1L)
- CreateDWordField(CRES, ^DMLO._BAS, DMLB)
- CreateDWordField(CRES, ^DMLO._LEN, DMLL)
- CreateDWordField(CRES, ^PCBM._MIN, PBMB)
- CreateDWordField(CRES, ^PCBM._LEN, PBML)
-
- CreateQWordField(CRES, ^DMHI._MIN, DMHB)
- CreateQWordField(CRES, ^DMHI._LEN, DMHL)
- CreateQWordField(CRES, ^PEBM._MIN, EBMB)
- CreateQWordField(CRES, ^PEBM._LEN, EBML)
-
- If(LGreater(LOMH, 0xC0000)){
- Store(0xC0000, EM1B) /* Hole above C0000 and below E0000 */
- Subtract(LOMH, 0xC0000, EM1L) /* subtract start, assumes allocation from C0000 going up */
- }
-
- /* Set size of memory from 1MB to TopMem */
- Subtract(TOM1, 0x100000, DMLL)
-
- /*
- * If(LNotEqual(TOM2, 0x00000000)){
- * Store(0x100000000,DMHB) DRAM from 4GB to TopMem2
- * ShiftLeft(TOM2, 20, Local0)
- * Subtract(Local0, 0x100000000, DMHL)
- * }
- */
-
- /* If there is no memory above 4GB, put the BIOS just below 4GB */
- If(LEqual(TOM2, 0x00000000)){
- Store(PBAD,PBMB) /* Reserve the "BIOS" space */
- Store(PBLN,PBML)
- }
- Else { /* Otherwise, put the BIOS just below 16EB */
- ShiftLeft(PBAD,16,EBMB) /* Reserve the "BIOS" space */
- Store(PBLN,EBML)
- }
-
- Return(CRES) /* note to change the Name buffer */
- } /* end of Method(_SB.PCI0._CRS) */
-
- /*
- *
- * FIRST METHOD CALLED UPON BOOT
- *
- * 1. If debugging, print current OS and ACPI interpreter.
- * 2. Get PCI Interrupt routing from ACPI VSM, this
- * value is based on user choice in BIOS setup.
- */
- Method(_INI, 0) {
- /* DBGO("\\_SB\\_INI\n") */
- /* DBGO(" DSDT.ASL code from ") */
- /* DBGO(__DATE__) */
- /* DBGO(" ") */
- /* DBGO(__TIME__) */
- /* DBGO("\n Sleep states supported: ") */
- /* DBGO("\n") */
- /* DBGO(" \\_OS=") */
- /* DBGO(\_OS) */
- /* DBGO("\n \\_REV=") */
- /* DBGO(\_REV) */
- /* DBGO("\n") */
-
- /* Determine the OS we're running on */
- CkOT()
-
- /* On older chips, clear PciExpWakeDisEn */
- /*if (LLessEqual(\SBRI, 0x13)) {
- * Store(0,\PWDE)
- * }
- */
- } /* End Method(_SB._INI) */
} /* End Device(PCI0) */
- Device(PWRB) { /* Start Power button device */
- Name(_HID, EISAID("PNP0C0C"))
- Name(_UID, 0xAA)
- Name(_PRW, Package () {3, 0x04}) /* wake from S1-S4 */
- Name(_STA, 0x0B) /* sata is invisible */
- }
} /* End \_SB scope */
-
- Scope(\_SI) {
- Method(_SST, 1) {
- /* DBGO("\\_SI\\_SST\n") */
- /* DBGO(" New Indicator state: ") */
- /* DBGO(Arg0) */
- /* DBGO("\n") */
- }
- } /* End Scope SI */
-
- /* SMBUS Support */
- Mutex (SBX0, 0x00)
- OperationRegion (SMB0, SystemIO, 0xB00, 0x0C)
- Field (SMB0, ByteAcc, NoLock, Preserve) {
- HSTS, 8, /* SMBUS status */
- SSTS, 8, /* SMBUS slave status */
- HCNT, 8, /* SMBUS control */
- HCMD, 8, /* SMBUS host cmd */
- HADD, 8, /* SMBUS address */
- DAT0, 8, /* SMBUS data0 */
- DAT1, 8, /* SMBUS data1 */
- BLKD, 8, /* SMBUS block data */
- SCNT, 8, /* SMBUS slave control */
- SCMD, 8, /* SMBUS shaow cmd */
- SEVT, 8, /* SMBUS slave event */
- SDAT, 8 /* SMBUS slave data */
- }
-
- Method (WCLR, 0, NotSerialized) { /* clear SMBUS status register */
- Store (0x1E, HSTS)
- Store (0xFA, Local0)
- While (LAnd (LNotEqual (And (HSTS, 0x1E), Zero), LGreater (Local0, Zero))) {
- Stall (0x64)
- Decrement (Local0)
- }
-
- Return (Local0)
- }
-
- Method (SWTC, 1, NotSerialized) {
- Store (Arg0, Local0)
- Store (0x07, Local2)
- Store (One, Local1)
- While (LEqual (Local1, One)) {
- Store (And (HSTS, 0x1E), Local3)
- If (LNotEqual (Local3, Zero)) { /* read sucess */
- If (LEqual (Local3, 0x02)) {
- Store (Zero, Local2)
- }
-
- Store (Zero, Local1)
- }
- Else {
- If (LLess (Local0, 0x0A)) { /* read failure */
- Store (0x10, Local2)
- Store (Zero, Local1)
- }
- Else {
- Sleep (0x0A) /* 10 ms, try again */
- Subtract (Local0, 0x0A, Local0)
- }
- }
- }
-
- Return (Local2)
- }
-
- Method (SMBR, 3, NotSerialized) {
- Store (0x07, Local0)
- If (LEqual (Acquire (SBX0, 0xFFFF), Zero)) {
- Store (WCLR (), Local0) /* clear SMBUS status register before read data */
- If (LEqual (Local0, Zero)) {
- Release (SBX0)
- Return (0x0)
- }
-
- Store (0x1F, HSTS)
- Store (Or (ShiftLeft (Arg1, One), One), HADD)
- Store (Arg2, HCMD)
- If (LEqual (Arg0, 0x07)) {
- Store (0x48, HCNT) /* read byte */
- }
-
- Store (SWTC (0x03E8), Local1) /* 1000 ms */
- If (LEqual (Local1, Zero)) {
- If (LEqual (Arg0, 0x07)) {
- Store (DAT0, Local0)
- }
- }
- Else {
- Store (Local1, Local0)
- }
-
- Release (SBX0)
- }
-
- /* DBGO("the value of SMBusData0 register ") */
- /* DBGO(Arg2) */
- /* DBGO(" is ") */
- /* DBGO(Local0) */
- /* DBGO("\n") */
-
- Return (Local0)
- }
-
- /* THERMAL */
- Scope(\_TZ) {
- Name (KELV, 2732)
- Name (THOT, 800)
- Name (TCRT, 850)
-
- ThermalZone(TZ00) {
- Method(_AC0,0) { /* Active Cooling 0 (0=highest fan speed) */
- /* DBGO("\\_TZ\\TZ00\\_AC0\n") */
- Return(Add(0, 2730))
- }
- Method(_AL0,0) { /* Returns package of cooling device to turn on */
- /* DBGO("\\_TZ\\TZ00\\_AL0\n") */
- Return(Package() {\_TZ.TZ00.FAN0})
- }
- Device (FAN0) {
- Name(_HID, EISAID("PNP0C0B"))
- Name(_PR0, Package() {PFN0})
- }
-
- PowerResource(PFN0,0,0) {
- Method(_STA) {
- Store(0xF,Local0)
- Return(Local0)
- }
- Method(_ON) {
- /* DBGO("\\_TZ\\TZ00\\FAN0 _ON\n") */
- }
- Method(_OFF) {
- /* DBGO("\\_TZ\\TZ00\\FAN0 _OFF\n") */
- }
- }
-
- Method(_HOT,0) { /* return hot temp in tenths degree Kelvin */
- /* DBGO("\\_TZ\\TZ00\\_HOT\n") */
- Return (Add (THOT, KELV))
- }
- Method(_CRT,0) { /* return critical temp in tenths degree Kelvin */
- /* DBGO("\\_TZ\\TZ00\\_CRT\n") */
- Return (Add (TCRT, KELV))
- }
- Method(_TMP,0) { /* return current temp of this zone */
- Store (SMBR (0x07, 0x4C,, 0x00), Local0)
- If (LGreater (Local0, 0x10)) {
- Store (Local0, Local1)
- }
- Else {
- Add (Local0, THOT, Local0)
- Return (Add (400, KELV))
- }
-
- Store (SMBR (0x07, 0x4C, 0x01), Local0)
- /* only the two MSBs in the external temperature low byte are used, resolution 0.25. We ignore it */
- /* Store (SMBR (0x07, 0x4C, 0x10), Local2) */
- If (LGreater (Local0, 0x10)) {
- If (LGreater (Local0, Local1)) {
- Store (Local0, Local1)
- }
-
- Multiply (Local1, 10, Local1)
- Return (Add (Local1, KELV))
- }
- Else {
- Add (Local0, THOT, Local0)
- Return (Add (400 , KELV))
- }
- } /* end of _TMP */
- } /* end of TZ00 */
- }
}
/* End of ASL file */
projects / coreboot.git / commitdiff