This patch unifies the use of config options in v2 to all start with CONFIG_

[coreboot.git] / src / mainboard / iei / juki-511p / Options.lb

diff --git a/src/mainboard/iei/juki-511p/Options.lb b/src/mainboard/iei/juki-511p/Options.lb
index 2e91257805d7bb2beaa6a4b43e151157d37d6103..acedd0f765658186e3fbd627d054145a7e9c2c91 100644 (file)
--- a/src/mainboard/iei/juki-511p/Options.lb
+++ b/src/mainboard/iei/juki-511p/Options.lb
@@ -1,53 +1,53 @@
-uses HAVE_MP_TABLE
+uses CONFIG_HAVE_MP_TABLE
 uses CONFIG_CBFS
-uses HAVE_PIRQ_TABLE
-uses USE_FALLBACK_IMAGE
-uses HAVE_FALLBACK_BOOT
-uses HAVE_HARD_RESET
+uses CONFIG_HAVE_PIRQ_TABLE
+uses CONFIG_USE_FALLBACK_IMAGE
+uses CONFIG_HAVE_FALLBACK_BOOT
+uses CONFIG_HAVE_HARD_RESET
 uses CONFIG_UDELAY_IO
-uses HAVE_OPTION_TABLE
-uses USE_OPTION_TABLE
+uses CONFIG_HAVE_OPTION_TABLE
+uses CONFIG_USE_OPTION_TABLE
 uses CONFIG_COMPRESS
 uses CONFIG_COMPRESSED_PAYLOAD_NRV2B
 uses CONFIG_COMPRESSED_PAYLOAD_LZMA
 uses CONFIG_PRECOMPRESSED_PAYLOAD
 uses CONFIG_ROM_PAYLOAD
-uses IRQ_SLOT_COUNT
-uses MAINBOARD
-uses MAINBOARD_VENDOR
-uses MAINBOARD_PART_NUMBER
+uses CONFIG_IRQ_SLOT_COUNT
+uses CONFIG_MAINBOARD
+uses CONFIG_MAINBOARD_VENDOR
+uses CONFIG_MAINBOARD_PART_NUMBER
 uses COREBOOT_EXTRA_VERSION
-uses ARCH
-uses FALLBACK_SIZE
-uses STACK_SIZE
-uses HEAP_SIZE
-uses ROM_SIZE
-uses ROM_SECTION_SIZE
-uses ROM_IMAGE_SIZE
-uses ROM_SECTION_SIZE
-uses ROM_SECTION_OFFSET
+uses CONFIG_ARCH
+uses CONFIG_FALLBACK_SIZE
+uses CONFIG_STACK_SIZE
+uses CONFIG_HEAP_SIZE
+uses CONFIG_ROM_SIZE
+uses CONFIG_ROM_SECTION_SIZE
+uses CONFIG_ROM_IMAGE_SIZE
+uses CONFIG_ROM_SECTION_SIZE
+uses CONFIG_ROM_SECTION_OFFSET
 uses CONFIG_ROM_PAYLOAD_START
-uses PAYLOAD_SIZE
-uses _ROMBASE
-uses _RAMBASE
-uses XIP_ROM_SIZE
-uses XIP_ROM_BASE
-uses HAVE_MP_TABLE
-uses CROSS_COMPILE
+uses CONFIG_PAYLOAD_SIZE
+uses CONFIG_ROMBASE
+uses CONFIG_RAMBASE
+uses CONFIG_XIP_ROM_SIZE
+uses CONFIG_XIP_ROM_BASE
+uses CONFIG_HAVE_MP_TABLE
+uses CONFIG_CROSS_COMPILE
 uses CC
-uses HOSTCC
-uses OBJCOPY
+uses CONFIG_HOSTCC
+uses CONFIG_OBJCOPY
 uses CONFIG_CONSOLE_SERIAL8250
-uses DEFAULT_CONSOLE_LOGLEVEL
-uses MAXIMUM_CONSOLE_LOGLEVEL
-uses TTYS0_BAUD
-uses TTYS0_BASE
-uses TTYS0_LCS
+uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
+uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
+uses CONFIG_TTYS0_BAUD
+uses CONFIG_TTYS0_BASE
+uses CONFIG_TTYS0_LCS
 uses CONFIG_VIDEO_MB
-uses PIRQ_ROUTE
+uses CONFIG_PIRQ_ROUTE
 
-## ROM_SIZE is the size of boot ROM that this board will use.
-default ROM_SIZE  = 256*1024
+## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
+default CONFIG_ROM_SIZE  = 256*1024
 
 ###
 ### Build options
@@ -56,57 +56,57 @@ default ROM_SIZE  = 256*1024
 ##
 ## Build code for the fallback boot
 ##
-default HAVE_FALLBACK_BOOT=1
+default CONFIG_HAVE_FALLBACK_BOOT=1
 
 ##
 ## no MP table
 ##
-default HAVE_MP_TABLE=0
+default CONFIG_HAVE_MP_TABLE=0
 
 ##
 ## Build code to reset the motherboard from coreboot
 ##
-default HAVE_HARD_RESET=0
+default CONFIG_HAVE_HARD_RESET=0
 
 default CONFIG_UDELAY_IO=1
 ##
 ## Build code to export a programmable irq routing table
 ##
-default HAVE_PIRQ_TABLE=0
-default IRQ_SLOT_COUNT=2
-default PIRQ_ROUTE=1
+default CONFIG_HAVE_PIRQ_TABLE=0
+default CONFIG_IRQ_SLOT_COUNT=2
+default CONFIG_PIRQ_ROUTE=1
 #object irq_tables.o
 
 ##
 ## Build code to export a CMOS option table
 ##
-default HAVE_OPTION_TABLE=0
+default CONFIG_HAVE_OPTION_TABLE=0
 
 ###
 ### coreboot layout values
 ###
 
-## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default ROM_IMAGE_SIZE = 65536
-default FALLBACK_SIZE = 131072
+## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
+default CONFIG_ROM_IMAGE_SIZE = 65536
+default CONFIG_FALLBACK_SIZE = 131072
 
 ##
 ## Use a small 8K stack
 ##
-default STACK_SIZE=0x2000
+default CONFIG_STACK_SIZE=0x2000
 
 ##
 ## Use a small 16K heap
 ##
-default HEAP_SIZE=0x4000
+default CONFIG_HEAP_SIZE=0x4000
 
 ##
 ## Only use the option table in a normal image
 ##
-#default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE
-default USE_OPTION_TABLE = 0
+#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
+default CONFIG_USE_OPTION_TABLE = 0
 
-default _RAMBASE = 0x00004000
+default CONFIG_RAMBASE = 0x00004000
 
 default CONFIG_ROM_PAYLOAD     = 1
 
@@ -116,32 +116,32 @@ default CONFIG_ROM_PAYLOAD     = 1
 
 # To Enable the Serial Console
 default CONFIG_CONSOLE_SERIAL8250=1
-default DEFAULT_CONSOLE_LOGLEVEL=8
-default MAXIMUM_CONSOLE_LOGLEVEL=8
+default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
+default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
 
 ## Select the serial console baud rate
-default TTYS0_BAUD=115200
-#default TTYS0_BAUD=57600
-#default TTYS0_BAUD=38400
-#default TTYS0_BAUD=19200
-#default TTYS0_BAUD=9600
-#default TTYS0_BAUD=4800
-#default TTYS0_BAUD=2400
-#default TTYS0_BAUD=1200
+default CONFIG_TTYS0_BAUD=115200
+#default CONFIG_TTYS0_BAUD=57600
+#default CONFIG_TTYS0_BAUD=38400
+#default CONFIG_TTYS0_BAUD=19200
+#default CONFIG_TTYS0_BAUD=9600
+#default CONFIG_TTYS0_BAUD=4800
+#default CONFIG_TTYS0_BAUD=2400
+#default CONFIG_TTYS0_BAUD=1200
 
 # Select the serial console base port
-default TTYS0_BASE=0x3f8
+default CONFIG_TTYS0_BASE=0x3f8
 
 # Select the serial protocol
 # This defaults to 8 data bits, 1 stop bit, and no parity
-default TTYS0_LCS=0x3
+default CONFIG_TTYS0_LCS=0x3
 
 ##
 ## The default compiler
 ##
-default CROSS_COMPILE=""
-default CC="$(CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
+default CONFIG_CROSS_COMPILE=""
+default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
+default CONFIG_HOSTCC="gcc"
 
 default CONFIG_VIDEO_MB = 0