src/superio/smsc/lpc47m10x/superio.c

   1 /*
   2  * This file is part of the coreboot project.
   3  *
   4  * Copyright (C) 2000 AG Electronics Ltd.
   5  * Copyright (C) 2003-2004 Linux Networx
   6  * Copyright (C) 2004 Tyan
   7  * Copyright (C) 2005 Digital Design Corporation
   8  * Copyright (C) 2006 Ron Minnich, LANL
   9  *
  10  * This program is free software; you can redistribute it and/or modify
  11  * it under the terms of the GNU General Public License as published by
  12  * the Free Software Foundation; either version 2 of the License, or
  13  * (at your option) any later version.
  14  *
  15  * This program is distributed in the hope that it will be useful,
  16  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  18  * GNU General Public License for more details.
  19  *
  20  * You should have received a copy of the GNU General Public License
  21  * along with this program; if not, write to the Free Software
  22  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  23  */
  24
  25 #include <arch/io.h>
  26 #include <device/device.h>
  27 #include <device/pnp.h>
  28 #include <console/console.h>
  29 #include <device/smbus.h>
  30 #include <string.h>
  31 #include <bitops.h>
  32 #include <uart8250.h>
  33 #include <pc80/keyboard.h>
  34 #include <stdlib.h>
  35 #include "chip.h"
  36 #include "lpc47m10x.h"
  37
  38 /* Forward declarations */
  39 static void enable_dev(device_t dev);
  40 static void lpc47m10x_pnp_set_resources(device_t dev);
  41 static void lpc47m10x_pnp_enable_resources(device_t dev);
  42 static void lpc47m10x_pnp_enable(device_t dev);
  43 static void lpc47m10x_init(device_t dev);
  44
  45 static void pnp_enter_conf_state(device_t dev);
  46 static void pnp_exit_conf_state(device_t dev);
  47 // static void dump_pnp_device(device_t dev);
  48
  49 struct chip_operations superio_smsc_lpc47m10x_ops = {
  50         CHIP_NAME("SMSC LPC47M10x Super I/O")
  51         .enable_dev = enable_dev
  52 };
  53
  54 static struct device_operations ops = {
  55         .read_resources   = pnp_read_resources,
  56         .set_resources    = lpc47m10x_pnp_set_resources,
  57         .enable_resources = lpc47m10x_pnp_enable_resources,
  58         .enable           = lpc47m10x_pnp_enable,
  59         .init             = lpc47m10x_init,
  60 };
  61
  62 static struct pnp_info pnp_dev_info[] = {
  63         { &ops, LPC47M10X2_FDC, PNP_IO0 | PNP_IRQ0 | PNP_DRQ0, {0x07f8, 0}, },
  64         { &ops, LPC47M10X2_PP,  PNP_IO0 | PNP_IRQ0 | PNP_DRQ0, {0x07f8, 0}, },
  65         { &ops, LPC47M10X2_SP1, PNP_IO0 | PNP_IRQ0, {0x07f8, 0}, },
  66         { &ops, LPC47M10X2_SP2, PNP_IO0 | PNP_IRQ0, {0x07f8, 0}, },
  67         { &ops, LPC47M10X2_KBC, PNP_IO0 | PNP_IO1 | PNP_IRQ0 | PNP_IRQ1, {0x07ff, 0}, {0x07ff, 4}, },
  68 };
  69
  70 /**
  71  * Create device structures and allocate resources to devices specified in the
  72  * pnp_dev_info array (above).
  73  *
  74  * @param dev Pointer to structure describing a Super I/O device.
  75  */
  76 static void enable_dev(device_t dev)
  77 {
  78         pnp_enable_devices(dev, &pnp_ops, ARRAY_SIZE(pnp_dev_info),
  79                            pnp_dev_info);
  80 }
  81
  82 /**
  83  * Configure the specified Super I/O device with the resources (I/O space,
  84  * etc.) that have been allocated for it.
  85  *
  86  * @param dev Pointer to structure describing a Super I/O device.
  87  */
  88 static void lpc47m10x_pnp_set_resources(device_t dev)
  89 {
  90         pnp_enter_conf_state(dev);
  91         pnp_set_resources(dev);
  92         pnp_exit_conf_state(dev);
  93 }
  94
  95 static void lpc47m10x_pnp_enable_resources(device_t dev)
  96 {
  97         pnp_enter_conf_state(dev);
  98         pnp_enable_resources(dev);
  99         pnp_exit_conf_state(dev);
 100 }
 101
 102 static void lpc47m10x_pnp_enable(device_t dev)
 103 {
 104         pnp_enter_conf_state(dev);
 105         pnp_set_logical_device(dev);
 106         pnp_set_enable(dev, !!dev->enabled);
 107         pnp_exit_conf_state(dev);
 108 }
 109
 110 /**
 111  * Initialize the specified Super I/O device.
 112  *
 113  * Devices other than COM ports and the keyboard controller are ignored.
 114  * For COM ports, we configure the baud rate.
 115  *
 116  * @param dev Pointer to structure describing a Super I/O device.
 117  */
 118 static void lpc47m10x_init(device_t dev)
 119 {
 120         struct superio_smsc_lpc47m10x_config *conf = dev->chip_info;
 121
 122         if (!dev->enabled)
 123                 return;
 124
 125         switch(dev->path.pnp.device) {
 126         case LPC47M10X2_KBC:
 127                 pc_keyboard_init(&conf->keyboard);
 128                 break;
 129         }
 130 }
 131
 132 static void pnp_enter_conf_state(device_t dev)
 133 {
 134         outb(0x55, dev->path.pnp.port);
 135 }
 136
 137 static void pnp_exit_conf_state(device_t dev)
 138 {
 139         outb(0xaa, dev->path.pnp.port);
 140 }
 141
 142 #if 0
 143 /**
 144  * Print the values of all of the LPC47M10X2's configuration registers.
 145  *
 146  * NOTE: The LPC47M10X2 must be in config mode when this function is called.
 147  *
 148  * @param dev Pointer to structure describing a Super I/O device.
 149  */
 150 static void dump_pnp_device(device_t dev)
 151 {
 152         int i;
 153         print_debug("\n");
 154
 155         for (i = 0; i <= LPC47M10X2_MAX_CONFIG_REGISTER; i++) {
 156                 u8 register_value;
 157
 158                 if ((i & 0x0f) == 0) {
 159                         print_debug_hex8(i);
 160                         print_debug_char(':');
 161                 }
 162
 163                 /*
 164                  * Skip over 'register' that would cause exit from
 165                  * configuration mode.
 166                  */
 167                 if (i == 0xaa)
 168                         register_value = 0xaa;
 169                 else
 170                         register_value = pnp_read_config(dev, i);
 171
 172                 print_debug_char(' ');
 173                 print_debug_hex8(register_value);
 174                 if ((i & 0x0f) == 0x0f)
 175                         print_debug("\n");
 176         }
 177
 178         print_debug("\n");
 179 }
 180 #endif