1 #include <console/console.h>
2 #include <device/device.h>
3 #include <device/pci.h>
4 #include <device/pci_ids.h>
5 #include <device/pci_ops.h>
8 static void sata_init(struct device *dev)
11 /* Enable sata devices so the linux sata driver will work */
14 /* Enable SATA devices */
16 printk_debug("SATA init\n");
17 /* SATA configuration */
18 pci_write_config8(dev, 0x04, 0x07);
19 pci_write_config8(dev, 0x09, 0x8f);
22 pci_write_config16(dev, 0x40, 0x0a307);
23 pci_write_config16(dev, 0x42, 0x0a307);
26 pci_write_config16(dev, 0x48, 0x000f);
27 pci_write_config16(dev, 0x4a, 0x1111);
30 pci_write_config16(dev, 0x54, 0xf00f);
32 /* Combine ide - sata configuration */
33 pci_write_config8(dev, 0x90, 0x0);
35 /* port 0 & 1 enable */
36 pci_write_config8(dev, 0x92, 0x33);
39 pci_write_config16(dev, 0xa0, 0x0018);
40 pci_write_config32(dev, 0xa4, 0x00000264);
41 pci_write_config16(dev, 0xa0, 0x0040);
42 pci_write_config32(dev, 0xa4, 0x00220043);
44 printk_debug("SATA Enabled\n");
47 static void esb6300_sata_set_subsystem(device_t dev, unsigned vendor, unsigned device)
49 /* This value is also visible in usb1, usb2 and smbus functions */
50 pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
51 ((device & 0xffff) << 16) | (vendor & 0xffff));
54 static struct pci_operations lops_pci = {
55 .set_subsystem = esb6300_sata_set_subsystem,
57 static struct device_operations sata_ops = {
58 .read_resources = pci_dev_read_resources,
59 .set_resources = pci_dev_set_resources,
60 .enable_resources = pci_dev_enable_resources,
66 static const struct pci_driver sata_driver __pci_driver = {
68 .vendor = PCI_VENDOR_ID_INTEL,
69 .device = PCI_DEVICE_ID_INTEL_6300ESB_SATA,
72 static const struct pci_driver sata_driver_nr __pci_driver = {
74 .vendor = PCI_VENDOR_ID_INTEL,
75 .device = PCI_DEVICE_ID_INTEL_6300ESB_SATA_RAID,