Add support for Intel Panther Point PCH
[coreboot.git] / src / southbridge / intel / bd82x6x / usb_ehci.c
1 /*
2  * This file is part of the coreboot project.
3  *
4  * Copyright (C) 2008-2009 coresystems GmbH
5  *
6  * This program is free software; you can redistribute it and/or
7  * modify it under the terms of the GNU General Public License as
8  * published by the Free Software Foundation; version 2 of
9  * the License.
10  *
11  * This program is distributed in the hope that it will be useful,
12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
14  * GNU General Public License for more details.
15  *
16  * You should have received a copy of the GNU General Public License
17  * along with this program; if not, write to the Free Software
18  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
19  */
20
21 #include <console/console.h>
22 #include <device/device.h>
23 #include <device/pci.h>
24 #include <device/pci_ids.h>
25 #include "pch.h"
26 #include <usbdebug.h>
27 #include <arch/io.h>
28
29 static void usb_ehci_init(struct device *dev)
30 {
31         u32 reg32;
32
33         /* Disable Wake on Disconnect in RMH */
34         reg32 = RCBA32(0x35b0);
35         reg32 |= 0x22;
36         RCBA32(0x35b0) = reg32;
37
38         printk(BIOS_DEBUG, "EHCI: Setting up controller.. ");
39         reg32 = pci_read_config32(dev, PCI_COMMAND);
40         reg32 |= PCI_COMMAND_MASTER;
41         //reg32 |= PCI_COMMAND_SERR;
42         pci_write_config32(dev, PCI_COMMAND, reg32);
43
44         printk(BIOS_DEBUG, "done.\n");
45 }
46
47 static void usb_ehci_set_subsystem(device_t dev, unsigned vendor, unsigned device)
48 {
49         u8 access_cntl;
50
51         access_cntl = pci_read_config8(dev, 0x80);
52
53         /* Enable writes to protected registers. */
54         pci_write_config8(dev, 0x80, access_cntl | 1);
55
56         if (!vendor || !device) {
57                 pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
58                                 pci_read_config32(dev, PCI_VENDOR_ID));
59         } else {
60                 pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
61                                 ((device & 0xffff) << 16) | (vendor & 0xffff));
62         }
63
64         /* Restore protection. */
65         pci_write_config8(dev, 0x80, access_cntl);
66 }
67
68 static void usb_ehci_set_resources(struct device *dev)
69 {
70 #if CONFIG_USBDEBUG
71         struct resource *res;
72         u32 base;
73         u32 usb_debug;
74
75         usb_debug = get_ehci_debug();
76         set_ehci_debug(0);
77 #endif
78         pci_dev_set_resources(dev);
79
80 #if CONFIG_USBDEBUG
81         res = find_resource(dev, 0x10);
82         set_ehci_debug(usb_debug);
83         if (!res) return;
84         base = res->base;
85         set_ehci_base(base);
86         report_resource_stored(dev, res, "");
87 #endif
88 }
89
90
91
92 static struct pci_operations lops_pci = {
93         .set_subsystem  = &usb_ehci_set_subsystem,
94 };
95
96 static struct device_operations usb_ehci_ops = {
97         .read_resources         = pci_dev_read_resources,
98         .set_resources          = usb_ehci_set_resources,
99         .enable_resources       = pci_dev_enable_resources,
100         .init                   = usb_ehci_init,
101         .scan_bus               = 0,
102         .ops_pci                = &lops_pci,
103 };
104
105 static const struct pci_driver pch_usb_ehci1 __pci_driver = {
106         .ops    = &usb_ehci_ops,
107         .vendor = PCI_VENDOR_ID_INTEL,
108         .device = 0x1c26,
109 };
110 static const struct pci_driver pch_usb_ehci2 __pci_driver = {
111         .ops    = &usb_ehci_ops,
112         .vendor = PCI_VENDOR_ID_INTEL,
113         .device = 0x1c2d,
114 };
115 static const struct pci_driver pch_usb_ehci3 __pci_driver = {
116         .ops    = &usb_ehci_ops,
117         .vendor = PCI_VENDOR_ID_INTEL,
118         .device = 0x1e26,
119 };
120 static const struct pci_driver pch_usb_ehci4 __pci_driver = {
121         .ops    = &usb_ehci_ops,
122         .vendor = PCI_VENDOR_ID_INTEL,
123         .device = 0x1e2d,
124 };