Drop excessive whitespace randomly sprinkled in romstage.c files.
[coreboot.git] / src / mainboard / msi / ms9185 / romstage.c
1 /*
2  * This file is part of the coreboot project.
3  *
4  * Copyright (C) 2006 Tyan
5  * Copyright (C) 2006 AMD
6  * Written by Yinghai Lu <yinghailu@gmail.com> for Tyan and AMD.
7  *
8  * Copyright (C) 2006 MSI
9  * Written by bxshi <bingxunshi@gmail.com> for MSI.
10  *
11  * This program is free software; you can redistribute it and/or modify
12  * it under the terms of the GNU General Public License as published by
13  * the Free Software Foundation; either version 2 of the License, or
14  * (at your option) any later version.
15  *
16  * This program is distributed in the hope that it will be useful,
17  * but WITHOUT ANY WARRANTY; without even the implied warranty of
18  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
19  * GNU General Public License for more details.
20  *
21  * You should have received a copy of the GNU General Public License
22  * along with this program; if not, write to the Free Software
23  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
24  */
25
26 #include <stdint.h>
27 #include <string.h>
28 #include <device/pci_def.h>
29 #include <device/pci_ids.h>
30 #include <arch/io.h>
31 #include <device/pnp_def.h>
32 #include <arch/romcc_io.h>
33 #include <cpu/x86/lapic.h>
34 #include <pc80/mc146818rtc.h>
35 #include <console/console.h>
36 #include <cpu/amd/model_fxx_rev.h>
37 #include "southbridge/broadcom/bcm5785/bcm5785_early_smbus.c"
38 #include "southbridge/broadcom/bcm5785/bcm5785_enable_rom.c"
39 #include "northbridge/amd/amdk8/raminit.h"
40 #include "cpu/amd/model_fxx/apic_timer.c"
41 #include "lib/delay.c"
42 #include <reset.h>
43 #include "cpu/x86/lapic/boot_cpu.c"
44 #include "northbridge/amd/amdk8/reset_test.c"
45 #include "northbridge/amd/amdk8/debug.c"
46 #include "superio/nsc/pc87417/pc87417_early_serial.c"
47 #include "cpu/x86/mtrr/earlymtrr.c"
48 #include "cpu/x86/bist.h"
49 #include "northbridge/amd/amdk8/setup_resource_map.c"
50 #include "southbridge/broadcom/bcm5785/bcm5785_early_setup.c"
51
52 #define SERIAL_DEV PNP_DEV(0x2e, PC87417_SP1)
53 #define RTC_DEV PNP_DEV(0x2e, PC87417_RTC)
54
55 static void memreset(int controllers, const struct mem_controller *ctrl)
56 {
57 }
58
59 static inline void activate_spd_rom(const struct mem_controller *ctrl)
60 {
61 #define SMBUS_SWITCH1 0x70
62 #define SMBUS_SWITCH2 0x72
63         unsigned device = (ctrl->channel0[0]) >> 8;
64         smbus_send_byte(SMBUS_SWITCH1, device & 0x0f);
65         smbus_send_byte(SMBUS_SWITCH2, (device >> 4) & 0x0f );
66 }
67
68 #if 0
69 static inline void change_i2c_mux(unsigned device)
70 {
71 #define SMBUS_SWITCH1 0x70
72 #define SMBUS_SWITCH2 0x72
73         smbus_send_byte(SMBUS_SWITCH1, device & 0x0f);
74         smbus_send_byte(SMBUS_SWITCH2, (device >> 4) & 0x0f );
75 }
76 #endif
77
78 static inline int spd_read_byte(unsigned device, unsigned address)
79 {
80         return smbus_read_byte(device, address);
81 }
82
83 #include "northbridge/amd/amdk8/amdk8_f.h"
84 #include "northbridge/amd/amdk8/incoherent_ht.c"
85 #include "northbridge/amd/amdk8/coherent_ht.c"
86 #include "northbridge/amd/amdk8/raminit_f.c"
87 #include "lib/generic_sdram.c"
88 #include "resourcemap.c" /* msi does not want the default */
89 #include "cpu/amd/dualcore/dualcore.c"
90 #include <spd.h>
91 #include "cpu/amd/car/post_cache_as_ram.c"
92 #include "cpu/amd/model_fxx/init_cpus.c"
93 #include "cpu/amd/model_fxx/fidvid.c"
94 #include "northbridge/amd/amdk8/early_ht.c"
95
96 #define RC0 (0x10<<8)
97 #define RC1 (0x01<<8)
98
99 void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
100 {
101        static const uint16_t spd_addr[] = {
102                       //first node
103                        RC0|DIMM0, RC0|DIMM2, RC0|DIMM4, RC0|DIMM6,
104                        RC0|DIMM1, RC0|DIMM3, RC0|DIMM5, RC0|DIMM7,
105                        //second node
106                        RC1|DIMM0, RC1|DIMM2, RC1|DIMM4, RC1|DIMM6,
107                        RC1|DIMM1, RC1|DIMM3, RC1|DIMM5, RC1|DIMM7,
108        };
109
110         struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE +
111                 CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
112
113         int needs_reset;
114         unsigned bsp_apicid = 0;
115
116         if (!cpu_init_detectedx && boot_cpu()) {
117                 /* Nothing special needs to be done to find bus 0 */
118                 /* Allow the HT devices to be found */
119
120                 enumerate_ht_chain();
121
122                 bcm5785_enable_rom();
123
124                 bcm5785_enable_lpc();
125
126                 //enable RTC
127                 pc87417_enable_dev(RTC_DEV);
128         }
129
130         if (bist == 0) {
131                bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
132         }
133
134 //     post_code(0x32);
135
136        pc87417_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
137         uart_init();
138         console_init();
139
140 //     dump_mem(CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE-0x200, CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE);
141
142        /* Halt if there was a built in self test failure */
143        report_bist_failure(bist);
144
145         printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1);
146
147        setup_ms9185_resource_map();
148 #if 0
149         dump_pci_device(PCI_DEV(0, 0x18, 0));
150        dump_pci_device(PCI_DEV(0, 0x19, 0));
151 #endif
152
153        print_debug("bsp_apicid="); print_debug_hex8(bsp_apicid); print_debug("\n");
154
155        setup_coherent_ht_domain();
156
157        wait_all_core0_started();
158 #if CONFIG_LOGICAL_CPUS==1
159         // It is said that we should start core1 after all core0 launched
160        /* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain,
161         * So here need to make sure last core0 is started, esp for two way system,
162         * (there may be apic id conflicts in that case)
163         */
164         start_other_cores();
165 //bx_a010-     wait_all_other_cores_started(bsp_apicid);
166 #endif
167
168        /* it will set up chains and store link pair for optimization later */
169         ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn
170
171        bcm5785_early_setup();
172
173 #if 0
174        //it your CPU min fid is 1G, you can change HT to 1G and FID to max one time.
175         needs_reset = optimize_link_coherent_ht();
176         needs_reset |= optimize_link_incoherent_ht(sysinfo);
177 #endif
178
179 #if CONFIG_SET_FIDVID
180
181         {
182                 msr_t msr;
183                 msr=rdmsr(0xc0010042);
184                 print_debug("begin msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\n");
185
186         }
187
188        enable_fid_change();
189
190        enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn);
191
192         init_fidvid_bsp(bsp_apicid);
193
194         // show final fid and vid
195         {
196                 msr_t msr;
197                 msr=rdmsr(0xc0010042);
198                 print_debug("end   msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\n");
199
200         }
201 #endif
202
203 #if 1
204        needs_reset = optimize_link_coherent_ht();
205        needs_reset |= optimize_link_incoherent_ht(sysinfo);
206
207         // fidvid change will issue one LDTSTOP and the HT change will be effective too
208         if (needs_reset) {
209                 print_info("ht reset -\n");
210                 soft_reset();
211         }
212 #endif
213        allow_all_aps_stop(bsp_apicid);
214
215         //It's the time to set ctrl in sysinfo now;
216        fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr);
217
218        enable_smbus();
219
220 #if 0
221        int i;
222        for(i=0;i<2;i++) {
223                activate_spd_rom(sysinfo->ctrl+i);
224                dump_smbus_registers();
225        }
226 #endif
227
228 #if 0
229        int i;
230         for(i=1;i<256;i<<=1) {
231                 change_i2c_mux(i);
232                 dump_smbus_registers();
233         }
234 #endif
235
236        //do we need apci timer, tsc...., only debug need it for better output
237         /* all ap stopped? */
238 //        init_timer(); // Need to use TMICT to synconize FID/VID
239
240        sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo);
241
242 #if 0
243         print_pci_devices();
244 #endif
245
246 #if 0
247 //        dump_pci_devices();
248         dump_pci_device_index_wait(PCI_DEV(0, 0x18, 2), 0x98);
249        dump_pci_device_index_wait(PCI_DEV(0, 0x19, 2), 0x98);
250 #endif
251
252        post_cache_as_ram();
253 }