X60: enable Ultrabay if device is plugged in

[coreboot.git] / src / mainboard / lenovo / x60 / devicetree.cb

##
## This file is part of the coreboot project.
##
## Copyright (C) 2007-2009 coresystems GmbH
## Copyright (C) 2011 Sven Schnelle <svens@stackframe.org>
##
## This program is free software; you can redistribute it and/or
## modify it under the terms of the GNU General Public License as
## published by the Free Software Foundation; version 2 of
## the License.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
## MA 02110-1301 USA
##

chip northbridge/intel/i945

        device lapic_cluster 0 on
                chip cpu/intel/socket_mFCPGA478
                        device lapic 0 on end
                end
        end

        device pci_domain 0 on
                device pci 00.0 on # Host bridge
                        subsystemid 0x17aa 0x2017
                end
                device pci 02.0 on # VGA controller
                        subsystemid 0x17aa 0x201a
                end
                device pci 02.1 on # display controller
                        subsystemid 0x17aa 0x201a
                end
                chip southbridge/intel/i82801gx
                        register "pirqa_routing" = "0x0b"
                        register "pirqb_routing" = "0x0b"
                        register "pirqc_routing" = "0x0b"
                        register "pirqd_routing" = "0x0b"
                        register "pirqe_routing" = "0x0b"
                        register "pirqf_routing" = "0x0b"
                        register "pirqg_routing" = "0x0b"
                        register "pirqh_routing" = "0x0b"

                        # GPI routing
                        #  0 No effect (default)
                        #  1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set)
                        #  2 SCI (if corresponding GPIO_EN bit is also set)
                        register "gpi13_routing" = "2"
                        register "gpi12_routing" = "2"
                        register "gpi8_routing" = "2"

                        register "sata_ahci" = "0x0"

                        register "gpe0_en" = "0x11000006"

                        device pci 1b.0 on # Audio Cnotroller
                                subsystemid 0x17aa 0x2010
                        end
                        device pci 1c.0 on end # Ethernet
                        device pci 1c.1 on end # Atheros WLAN
                        device pci 1d.0 on # USB UHCI
                                subsystemid 0x17aa 0x200a
                        end
                        device pci 1d.1 on # USB UHCI
                                subsystemid 0x17aa 0x200a
                        end
                        device pci 1d.2 on # USB UHCI
                                subsystemid 0x17aa 0x200a
                        end
                        device pci 1d.3 on # USB UHCI
                                subsystemid 0x17aa 0x200a
                        end
                        device pci 1d.7 on # USB2 EHCI
                                subsystemid 0x17aa 0x200b
                        end
                        device pci 1f.0 on # PCI-LPC bridge
                                subsystemid 0x17aa 0x2009
                                chip ec/lenovo/pmh7
                                        device pnp ff.1 on # dummy
                                        end
                                        register "backlight_enable" = "0x01"
                                end
                                chip ec/lenovo/h8
                                        device pnp ff.2 on # dummy
                                                io 0x60 = 0x62
                                                io 0x62 = 0x66
                                                io 0x64 = 0x1600
                                                io 0x66 = 0x1604
                                        end

                                        register "config0" = "0xa6"
                                        register "config1" = "0x05"
                                        register "config2" = "0xa0"
                                        register "config3" = "0x05"

                                        register "beepmask0" = "0xfe"
                                        register "beepmask1" = "0x96"

                                        register "event2_enable" = "0xff"
                                        register "event3_enable" = "0xff"
                                        register "event4_enable" = "0xf4"
                                        register "event5_enable" = "0x3c"

                                        register "wlan_enable" = "0x01"
                                        register "trackpoint_enable" = "0x03"
                                end
                                chip superio/nsc/pc87382
                                        device pnp 164e.2 on # IR
                                                io 0x60 = 0x2f8
                                        end

                                        device pnp 164e.3 off # Serial Port
                                                io 0x60 = 0x3f8
                                        end

                                        device pnp 164e.7 on # GPIO
                                                io 0x60 = 0x1680
                                        end

                                        device pnp 164e.19 on # DLPC
                                                io 0x60 = 0x164c
                                        end
                                end

                                chip superio/nsc/pc87392
                                        device pnp 2e.0 off #FDC
                                        end

                                        device pnp 2e.1 on # Parallel Port
                                                io 0x60 = 0x3bc
                                                irq 0x70 = 7
                                        end

                                        device pnp 2e.2 off # Serial Port / IR
                                                io 0x60 = 0x2f8
                                                irq 0x70 = 4
                                        end

                                        device pnp 2e.3 on # Serial Port
                                                io 0x60 = 0x3f8
                                                irq 0x70 = 4
                                        end

                                        device pnp 2e.7 on # GPIO
                                                io 0x60 = 0x1620
                                        end

                                        device pnp 2e.a off # WDT
                                        end
                                end
                        end
                        device pci 1f.1 on # IDE
                                subsystemid 0x17aa 0x200c
                        end
                        device pci 1f.2 on # SATA
                                subsystemid 0x17aa 0x200d
                        end
                        device pci 1f.3 on # SMBUS
                                subsystemid 0x17aa 0x200f
                        end
                end
                chip southbridge/ricoh/rl5c476
                end
        end
end