src/mainboard/hp/dl145_g3/romstage.c

   1 /*
   2  * This file is part of the coreboot project.
   3  *
   4  * Copyright (C) 2006 Tyan
   5  * Copyright (C) 2006 AMD
   6  * Written by Yinghai Lu <yinghailu@gmail.com> for Tyan and AMD.
   7  *
   8  * Copyright (C) 2007 University of Mannheim
   9  * Written by Philipp Degler <pdegler@rumms.uni-mannheim.de> for University of Mannheim
  10  * Copyright (C) 2009 University of Heidelberg
  11  * Written by Mondrian Nuessle <nuessle@uni-heidelberg.de> for University of Heidelberg
  12  *
  13  * This program is free software; you can redistribute it and/or modify
  14  * it under the terms of the GNU General Public License as published by
  15  * the Free Software Foundation; either version 2 of the License, or
  16  * (at your option) any later version.
  17  *
  18  * This program is distributed in the hope that it will be useful,
  19  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  20  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  21  * GNU General Public License for more details.
  22  *
  23  * You should have received a copy of the GNU General Public License
  24  * along with this program; if not, write to the Free Software
  25  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
  26  */
  27
  28 #if CONFIG_K8_REV_F_SUPPORT == 1
  29 #define K8_REV_F_SUPPORT_F0_F1_WORKAROUND 0
  30 #endif
  31
  32 #include <stdint.h>
  33 #include <string.h>
  34 #include <device/pci_def.h>
  35 #include <device/pci_ids.h>
  36 #include <arch/io.h>
  37 #include <device/pnp_def.h>
  38 #include <arch/romcc_io.h>
  39 #include <cpu/x86/lapic.h>
  40 #include <pc80/mc146818rtc.h>
  41 #include <console/console.h>
  42 #include <cpu/amd/model_fxx_rev.h>
  43 #include "southbridge/broadcom/bcm5785/bcm5785_early_smbus.c"
  44 #include "northbridge/amd/amdk8/raminit.h"
  45 #include "cpu/amd/model_fxx/apic_timer.c"
  46 #include "lib/delay.c"
  47 #include "cpu/x86/lapic/boot_cpu.c"
  48 #include "northbridge/amd/amdk8/reset_test.c"
  49 #include "superio/serverengines/pilot/pilot_early_serial.c"
  50 #include "superio/serverengines/pilot/pilot_early_init.c"
  51 #include "superio/nsc/pc87417/pc87417_early_serial.c"
  52 #include "cpu/x86/bist.h"
  53 #include "northbridge/amd/amdk8/debug.c"
  54 #include "cpu/x86/mtrr/earlymtrr.c"
  55 #include "northbridge/amd/amdk8/setup_resource_map.c"
  56 #include "southbridge/broadcom/bcm5785/bcm5785_early_setup.c"
  57
  58 #define SERIAL_DEV PNP_DEV(0x2e, PILOT_SP1)
  59 #define RTC_DEV PNP_DEV(0x4e, PC87417_RTC)
  60
  61 static void memreset(int controllers, const struct mem_controller *ctrl) { }
  62
  63 static inline void activate_spd_rom(const struct mem_controller *ctrl)
  64 {
  65 #define SMBUS_SWITCH1 0x70
  66 #define SMBUS_SWITCH2 0x72
  67          unsigned device = (ctrl->channel0[0]) >> 8;
  68          smbus_send_byte(SMBUS_SWITCH1, device & 0x0f);
  69          smbus_send_byte(SMBUS_SWITCH2, (device >> 4) & 0x0f );
  70 }
  71
  72 static inline int spd_read_byte(unsigned device, unsigned address)
  73 {
  74          return smbus_read_byte(device, address);
  75 }
  76
  77 #include "northbridge/amd/amdk8/amdk8_f.h"
  78 #include "northbridge/amd/amdk8/incoherent_ht.c"
  79 #include "northbridge/amd/amdk8/coherent_ht.c"
  80 #include "northbridge/amd/amdk8/raminit_f.c"
  81 #include "lib/generic_sdram.c"
  82 #include <spd.h>
  83 #include "cpu/amd/dualcore/dualcore.c"
  84 #include "cpu/amd/car/post_cache_as_ram.c"
  85 #include "cpu/amd/model_fxx/init_cpus.c"
  86 #include "cpu/amd/model_fxx/fidvid.c"
  87 #include "northbridge/amd/amdk8/early_ht.c"
  88
  89 #if 0
  90 #include "ipmi.c"
  91
  92 static void setup_early_ipmi_serial()
  93 {
  94         unsigned char result;
  95         char channel_access[]={0x06<<2,0x40,0x04,0x80,0x05};
  96         char serialmodem_conf[]={0x0c<<2,0x10,0x04,0x08,0x00,0x0f};
  97         char serial_mux1[]={0x0c<<2,0x12,0x04,0x06};
  98         char serial_mux2[]={0x0c<<2,0x12,0x04,0x03};
  99         char serial_mux3[]={0x0c<<2,0x12,0x04,0x07};
 100
 101 //      earlydbg(0x0d);
 102         //set channel access system only
 103         ipmi_request(5,channel_access);
 104 //      earlydbg(result);
 105 /*
 106         //Set serial/modem config
 107         result=ipmi_request(6,serialmodem_conf);
 108         earlydbg(result);
 109
 110         //Set serial mux 1
 111         result=ipmi_request(4,serial_mux1);
 112         earlydbg(result);
 113
 114         //Set serial mux 2
 115         result=ipmi_request(4,serial_mux2);
 116         earlydbg(result);
 117
 118         //Set serial mux 3
 119         result=ipmi_request(4,serial_mux3);
 120         earlydbg(result);
 121 */
 122 //      earlydbg(0x0e);
 123
 124 }
 125 #endif
 126
 127 void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 128 {
 129         static const uint16_t spd_addr[] = {
 130                 // first node
 131                 DIMM0, DIMM2, 0, 0,
 132                 DIMM1, DIMM3, 0, 0,
 133                 // second node
 134                 DIMM4, DIMM6, 0, 0,
 135                 DIMM5, DIMM7, 0, 0,
 136         };
 137
 138         struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE
 139                 + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
 140         int needs_reset;
 141         unsigned bsp_apicid = 0;
 142
 143         if (!cpu_init_detectedx && boot_cpu()) {
 144                 /* Nothing special needs to be done to find bus 0 */
 145                 /* Allow the HT devices to be found */
 146                 enumerate_ht_chain();
 147                 bcm5785_enable_lpc();
 148                 pc87417_enable_dev(RTC_DEV); /* Enable RTC */
 149         }
 150
 151         if (bist == 0)
 152                 bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
 153
 154         pilot_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
 155
 156         uart_init();
 157
 158         /* Halt if there was a built in self test failure */
 159         report_bist_failure(bist);
 160
 161         console_init();
 162 //      setup_early_ipmi_serial();
 163         pilot_early_init(SERIAL_DEV); //config port is being taken from SERIAL_DEV
 164         printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1);
 165         printk(BIOS_DEBUG, "bsp_apicid=%02x\n", bsp_apicid);
 166
 167 #if CONFIG_MEM_TRAIN_SEQ == 1
 168         set_sysinfo_in_ram(0); // in BSP so could hold all ap until sysinfo is in ram
 169 #endif
 170         setup_coherent_ht_domain();
 171
 172         wait_all_core0_started();
 173 #if CONFIG_LOGICAL_CPUS==1
 174         // It is said that we should start core1 after all core0 launched
 175         /* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain,
 176          * So here need to make sure last core0 is started, esp for two way system,
 177          * (there may be apic id conflicts in that case)
 178         */
 179         start_other_cores();
 180         wait_all_other_cores_started(bsp_apicid);
 181 #endif
 182
 183         /* it will set up chains and store link pair for optimization later */
 184         ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn
 185         bcm5785_early_setup();
 186
 187 #if CONFIG_SET_FIDVID
 188         {
 189                 msr_t msr;
 190                 msr=rdmsr(0xc0010042);
 191                 printk(BIOS_DEBUG, "begin msr fid, vid %08x %08x\n", msr.hi, msr.lo);
 192         }
 193         enable_fid_change();
 194         enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn);
 195         init_fidvid_bsp(bsp_apicid);
 196         // show final fid and vid
 197         {
 198                 msr_t msr;
 199                 msr=rdmsr(0xc0010042);
 200                 printk(BIOS_DEBUG, "end msr fid, vid %08x %08x\n", msr.hi, msr.lo);
 201         }
 202 #endif
 203
 204         needs_reset = optimize_link_coherent_ht();
 205         needs_reset |= optimize_link_incoherent_ht(sysinfo);
 206
 207         // fidvid change will issue one LDTSTOP and the HT change will be effective too
 208         if (needs_reset) {
 209                 printk(BIOS_INFO, "ht reset -\n");
 210                 soft_reset();
 211         }
 212
 213         allow_all_aps_stop(bsp_apicid);
 214
 215         //It's the time to set ctrl in sysinfo now;
 216         fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr);
 217         enable_smbus();
 218
 219         //do we need apci timer, tsc...., only debug need it for better output
 220         /* all ap stopped? */
 221         // init_timer(); // Need to use TMICT to synconize FID/VID
 222
 223         sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo);
 224
 225         post_cache_as_ram();
 226 }