src/mainboard/gigabyte/m57sli/romstage.c

   1 /*
   2  * This file is part of the coreboot project.
   3  *
   4  * Copyright (C) 2007 AMD
   5  * Written by Yinghai Lu <yinghailu@amd.com> for AMD.
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License as published by
   9  * the Free Software Foundation; either version 2 of the License, or
  10  * (at your option) any later version.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
  20  */
  21
  22 #if CONFIG_K8_REV_F_SUPPORT == 1
  23 #define K8_REV_F_SUPPORT_F0_F1_WORKAROUND 0
  24 #endif
  25
  26 #include <stdint.h>
  27 #include <string.h>
  28 #include <device/pci_def.h>
  29 #include <device/pci_ids.h>
  30 #include <arch/io.h>
  31 #include <device/pnp_def.h>
  32 #include <arch/romcc_io.h>
  33 #include <cpu/x86/lapic.h>
  34 #include <pc80/mc146818rtc.h>
  35 #include <console/console.h>
  36 #include <spd.h>
  37 #include <cpu/amd/model_fxx_rev.h>
  38 #include "southbridge/nvidia/mcp55/early_smbus.c"
  39 #include "northbridge/amd/amdk8/raminit.h"
  40 #include "cpu/amd/model_fxx/apic_timer.c"
  41 #include "lib/delay.c"
  42 #include "cpu/x86/lapic/boot_cpu.c"
  43 #include "northbridge/amd/amdk8/reset_test.c"
  44 #include "superio/ite/it8716f/early_serial.c"
  45 #include "superio/ite/it8716f/early_init.c"
  46 #include "cpu/x86/bist.h"
  47 #include "northbridge/amd/amdk8/debug.c"
  48 #include "cpu/x86/mtrr/earlymtrr.c"
  49 #include "northbridge/amd/amdk8/setup_resource_map.c"
  50 #include "southbridge/nvidia/mcp55/early_ctrl.c"
  51
  52 #define SERIAL_DEV PNP_DEV(0x2e, IT8716F_SP1)
  53 #define GPIO_DEV PNP_DEV(0x2e, IT8716F_GPIO)
  54
  55 static void memreset(int controllers, const struct mem_controller *ctrl) { }
  56 static void activate_spd_rom(const struct mem_controller *ctrl) { }
  57
  58 static inline int spd_read_byte(unsigned device, unsigned address)
  59 {
  60         return smbus_read_byte(device, address);
  61 }
  62
  63 #define MCP55_MB_SETUP \
  64         RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+37, 0x00, 0x68,/* GPIO38 PCI_REQ3 */ \
  65         RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+38, 0x00, 0x68,/* GPIO39 PCI_GNT3 */ \
  66         RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+39, 0x00, 0x68,/* GPIO40 PCI_GNT2 */ \
  67         RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+40, 0x00, 0x68,/* GPIO41 PCI_REQ2 */ \
  68         RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+59, 0x00, 0x60,/* GPIP60 FANCTL0 */ \
  69         RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+60, 0x00, 0x60,/* GPIO61 FANCTL1 */
  70
  71 #include "southbridge/nvidia/mcp55/early_setup_ss.h"
  72 #include "southbridge/nvidia/mcp55/early_setup_car.c"
  73 #include "northbridge/amd/amdk8/f.h"
  74 #include "northbridge/amd/amdk8/incoherent_ht.c"
  75 #include "northbridge/amd/amdk8/coherent_ht.c"
  76 #include "northbridge/amd/amdk8/raminit_f.c"
  77 #include "lib/generic_sdram.c"
  78 #include "resourcemap.c"
  79 #include "cpu/amd/dualcore/dualcore.c"
  80 #include "cpu/amd/car/post_cache_as_ram.c"
  81 #include "cpu/amd/model_fxx/init_cpus.c"
  82 #include "cpu/amd/model_fxx/fidvid.c"
  83 #include "northbridge/amd/amdk8/early_ht.c"
  84
  85 static void sio_setup(void)
  86 {
  87         uint32_t dword;
  88         uint8_t byte;
  89
  90         byte = pci_read_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b);
  91         byte |= 0x20;
  92         pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b, byte);
  93
  94         dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0);
  95         dword |= (1<<0);
  96         pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0, dword);
  97
  98         dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4);
  99         dword |= (1<<16);
 100         pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4, dword);
 101 }
 102
 103 void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 104 {
 105         static const uint16_t spd_addr [] = {
 106                 // Node 0
 107                 DIMM0, DIMM2, 0, 0,
 108                 DIMM1, DIMM3, 0, 0,
 109                 // Node 1
 110                 DIMM4, DIMM6, 0, 0,
 111                 DIMM5, DIMM7, 0, 0,
 112         };
 113
 114         struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE
 115                 + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
 116         int needs_reset = 0;
 117         unsigned bsp_apicid = 0;
 118         uint8_t tmp = 0;
 119
 120         if (!cpu_init_detectedx && boot_cpu()) {
 121                 /* Nothing special needs to be done to find bus 0 */
 122                 /* Allow the HT devices to be found */
 123                 enumerate_ht_chain();
 124                 sio_setup();
 125         }
 126
 127         if (bist == 0)
 128                 bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
 129
 130         pnp_enter_ext_func_mode(SERIAL_DEV);
 131         /* The following line will set CLKIN to 24 MHz, external */
 132         pnp_write_config(SERIAL_DEV, IT8716F_CONFIG_REG_CLOCKSEL, 0x11);
 133         tmp = pnp_read_config(SERIAL_DEV, IT8716F_CONFIG_REG_SWSUSP);
 134         /* Is serial flash enabled? Then enable writing to serial flash. */
 135         if (tmp & 0x0e) {
 136                 pnp_write_config(SERIAL_DEV, IT8716F_CONFIG_REG_SWSUSP, tmp | 0x10);
 137                 pnp_set_logical_device(GPIO_DEV);
 138                 /* Set Serial Flash interface to 0x0820 */
 139                 pnp_write_config(GPIO_DEV, 0x64, 0x08);
 140                 pnp_write_config(GPIO_DEV, 0x65, 0x20);
 141         }
 142         it8716f_enable_dev(SERIAL_DEV, CONFIG_TTYS0_BASE);
 143         pnp_exit_ext_func_mode(SERIAL_DEV);
 144
 145         setup_mb_resource_map();
 146
 147         console_init();
 148
 149         /* Halt if there was a built in self test failure */
 150         report_bist_failure(bist);
 151
 152         printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1);
 153
 154         print_debug("bsp_apicid="); print_debug_hex8(bsp_apicid); print_debug("\n");
 155
 156 #if CONFIG_MEM_TRAIN_SEQ == 1
 157         set_sysinfo_in_ram(0); // in BSP so could hold all ap until sysinfo is in ram
 158 #endif
 159         setup_coherent_ht_domain(); // routing table and start other core0
 160
 161         wait_all_core0_started();
 162 #if CONFIG_LOGICAL_CPUS==1
 163         // It is said that we should start core1 after all core0 launched
 164         /* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain,
 165          * So here need to make sure last core0 is started, esp for two way system,
 166          * (there may be apic id conflicts in that case)
 167          */
 168         start_other_cores();
 169         wait_all_other_cores_started(bsp_apicid);
 170 #endif
 171
 172         /* it will set up chains and store link pair for optimization later */
 173         ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn
 174
 175 #if CONFIG_SET_FIDVID
 176         {
 177                 msr_t msr;
 178                 msr=rdmsr(0xc0010042);
 179                 print_debug("begin msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\n");
 180         }
 181         enable_fid_change();
 182         enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn);
 183         init_fidvid_bsp(bsp_apicid);
 184         // show final fid and vid
 185         {
 186                 msr_t msr;
 187                 msr=rdmsr(0xc0010042);
 188                 print_debug("end   msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\n");
 189         }
 190 #endif
 191
 192         init_timer(); // Need to use TMICT to synconize FID/VID
 193
 194         needs_reset |= optimize_link_coherent_ht();
 195         needs_reset |= optimize_link_incoherent_ht(sysinfo);
 196         needs_reset |= mcp55_early_setup_x();
 197
 198         // fidvid change will issue one LDTSTOP and the HT change will be effective too
 199         if (needs_reset) {
 200                 print_info("ht reset -\n");
 201                 soft_reset();
 202         }
 203         allow_all_aps_stop(bsp_apicid);
 204
 205         //It's the time to set ctrl in sysinfo now;
 206         fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr);
 207
 208         enable_smbus();
 209
 210         /* all ap stopped? */
 211
 212         sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo);
 213
 214         post_cache_as_ram(); // bsp swtich stack to ram and copy sysinfo ram now
 215 }