lustiger modelsim fix...

[calu.git] / cpu / src / extension_uart_pkg.vhd

diff --git a/cpu/src/extension_uart_pkg.vhd b/cpu/src/extension_uart_pkg.vhd
index 604a06057e810c154d36f887fa81550219854bd4..a7f14d9442c611e0b4820308107ec3409b31afba 100644 (file)
--- a/cpu/src/extension_uart_pkg.vhd
+++ b/cpu/src/extension_uart_pkg.vhd
@@ -16,12 +16,15 @@ package extension_uart_pkg is
 --RS232
 constant UART_WIDTH : integer := 8;
 subtype uart_data is std_logic_vector(UART_WIDTH-1 downto 0);
-constant BAUD_RATE_WITH : integer := 16;
-subtype baud_rate_l is std_logic_vector(BAUD_RATE_WITH-1 downto 0);
+constant BAUD_RATE_WIDTH : integer := 16;
+subtype baud_rate_l is std_logic_vector(BAUD_RATE_WIDTH-1 downto 0);
 --CLKs
-constant CLK_FREQ_MHZ : real := 33.33;
-constant BAUD_RATE : integer := 115200;
-constant CLK_PER_BAUD : integer := integer((CLK_FREQ_MHZ * 1000000.0) / real(BAUD_RATE) - 0.5);
+--constant CLK_FREQ_MHZ : real := 33.33;
+--constant BAUD_RATE : integer := 115200;
+--constant CLK_PER_BAUD : integer := integer((CLK_FREQ_MHZ * 1000000.0) / real(BAUD_RATE) - 0.5);
+-- constant CLK_PER_BAUD : integer := 434;
+constant CLK_PER_BAUD : integer := 2083; -- @uni, bei 20MHz und 9600 Baud
+-- constant CLK_PER_BAUD : integer := 50; -- @modelsim
 
  component extension_uart is
         --some modules won't need all inputs/outputs
@@ -36,8 +39,10 @@ constant CLK_PER_BAUD : integer := integer((CLK_FREQ_MHZ * 1000000.0) / real(BAU
                -- general extension interface                  
                        ext_reg  : in extmod_rec;
                        data_out : out gp_register_t;
-               -- Input
 
+                       uart_int : out std_logic;
+               -- Input
+                       bus_rx : in std_logic;
                -- Ouput
                        bus_tx : out std_logic
                );
@@ -66,4 +71,28 @@ component rs232_tx is
 );
 end component rs232_tx;
 
+component rs232_rx is
+       generic (
+               -- active reset value
+               RESET_VALUE : std_logic;
+               SYNC_STAGES : integer range 2 to integer'high
+               );
+
+       port(
+               --System inputs
+               sys_clk : in std_logic;
+               sys_res_n : in std_logic;
+
+               --Bus
+               bus_rx_unsync : in std_logic;
+
+               --To sendlogic
+               new_rx_data : out std_logic;
+               rx_data : out uart_data;
+               bd_rate : in baud_rate_l
+       );
+end component rs232_rx;
+
+
+
 end package extension_uart_pkg;