src/mm/boehm-gc/libatomic_ops/doc/Makefile.in

   1 # Makefile.in generated by automake 1.10.2 from Makefile.am.
   2 # @configure_input@
   3
   4 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
   5 # 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
   6 # This Makefile.in is free software; the Free Software Foundation
   7 # gives unlimited permission to copy and/or distribute it,
   8 # with or without modifications, as long as this notice is preserved.
   9
  10 # This program is distributed in the hope that it will be useful,
  11 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
  12 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
  13 # PARTICULAR PURPOSE.
  14
  15 @SET_MAKE@
  16
  17 VPATH = @srcdir@
  18 pkgdatadir = $(datadir)/@PACKAGE@
  19 pkglibdir = $(libdir)/@PACKAGE@
  20 pkgincludedir = $(includedir)/@PACKAGE@
  21 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
  22 install_sh_DATA = $(install_sh) -c -m 644
  23 install_sh_PROGRAM = $(install_sh) -c
  24 install_sh_SCRIPT = $(install_sh) -c
  25 INSTALL_HEADER = $(INSTALL_DATA)
  26 transform = $(program_transform_name)
  27 NORMAL_INSTALL = :
  28 PRE_INSTALL = :
  29 POST_INSTALL = :
  30 NORMAL_UNINSTALL = :
  31 PRE_UNINSTALL = :
  32 POST_UNINSTALL = :
  33 build_triplet = @build@
  34 host_triplet = @host@
  35 target_triplet = @target@
  36 subdir = doc
  37 DIST_COMMON = $(dist_pkgdata_DATA) $(srcdir)/Makefile.am \
  38         $(srcdir)/Makefile.in COPYING
  39 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
  40 am__aclocal_m4_deps = $(top_srcdir)/configure.ac
  41 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
  42         $(ACLOCAL_M4)
  43 mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
  44 CONFIG_HEADER = $(top_builddir)/src/config.h
  45 CONFIG_CLEAN_FILES =
  46 SOURCES =
  47 DIST_SOURCES =
  48 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
  49 am__vpath_adj = case $$p in \
  50     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
  51     *) f=$$p;; \
  52   esac;
  53 am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
  54 am__installdirs = "$(DESTDIR)$(pkgdatadir)"
  55 dist_pkgdataDATA_INSTALL = $(INSTALL_DATA)
  56 DATA = $(dist_pkgdata_DATA)
  57 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
  58 ACLOCAL = @ACLOCAL@
  59 AMTAR = @AMTAR@
  60 AUTOCONF = @AUTOCONF@
  61 AUTOHEADER = @AUTOHEADER@
  62 AUTOMAKE = @AUTOMAKE@
  63 AWK = @AWK@
  64 CC = @CC@
  65 CCAS = @CCAS@
  66 CCASDEPMODE = @CCASDEPMODE@
  67 CCASFLAGS = @CCASFLAGS@
  68 CCDEPMODE = @CCDEPMODE@
  69 CFLAGS = @CFLAGS@
  70 CPP = @CPP@
  71 CPPFLAGS = @CPPFLAGS@
  72 CYGPATH_W = @CYGPATH_W@
  73 DEFS = @DEFS@
  74 DEPDIR = @DEPDIR@
  75 ECHO_C = @ECHO_C@
  76 ECHO_N = @ECHO_N@
  77 ECHO_T = @ECHO_T@
  78 EGREP = @EGREP@
  79 EXEEXT = @EXEEXT@
  80 GREP = @GREP@
  81 INSTALL = @INSTALL@
  82 INSTALL_DATA = @INSTALL_DATA@
  83 INSTALL_PROGRAM = @INSTALL_PROGRAM@
  84 INSTALL_SCRIPT = @INSTALL_SCRIPT@
  85 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
  86 LDFLAGS = @LDFLAGS@
  87 LIBOBJS = @LIBOBJS@
  88 LIBS = @LIBS@
  89 LTLIBOBJS = @LTLIBOBJS@
  90 MAKEINFO = @MAKEINFO@
  91 MKDIR_P = @MKDIR_P@
  92 OBJEXT = @OBJEXT@
  93 PACKAGE = @PACKAGE@
  94 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
  95 PACKAGE_NAME = @PACKAGE_NAME@
  96 PACKAGE_STRING = @PACKAGE_STRING@
  97 PACKAGE_TARNAME = @PACKAGE_TARNAME@
  98 PACKAGE_URL = @PACKAGE_URL@
  99 PACKAGE_VERSION = @PACKAGE_VERSION@
 100 PATH_SEPARATOR = @PATH_SEPARATOR@
 101 PICFLAG = @PICFLAG@
 102 RANLIB = @RANLIB@
 103 SET_MAKE = @SET_MAKE@
 104 SHELL = @SHELL@
 105 STRIP = @STRIP@
 106 VERSION = @VERSION@
 107 abs_builddir = @abs_builddir@
 108 abs_srcdir = @abs_srcdir@
 109 abs_top_builddir = @abs_top_builddir@
 110 abs_top_srcdir = @abs_top_srcdir@
 111 ac_ct_CC = @ac_ct_CC@
 112 am__include = @am__include@
 113 am__leading_dot = @am__leading_dot@
 114 am__quote = @am__quote@
 115 am__tar = @am__tar@
 116 am__untar = @am__untar@
 117 bindir = @bindir@
 118 build = @build@
 119 build_alias = @build_alias@
 120 build_cpu = @build_cpu@
 121 build_os = @build_os@
 122 build_vendor = @build_vendor@
 123 builddir = @builddir@
 124 datadir = @datadir@
 125 datarootdir = @datarootdir@
 126 docdir = @docdir@
 127 dvidir = @dvidir@
 128 exec_prefix = @exec_prefix@
 129 host = @host@
 130 host_alias = @host_alias@
 131 host_cpu = @host_cpu@
 132 host_os = @host_os@
 133 host_vendor = @host_vendor@
 134 htmldir = @htmldir@
 135 includedir = @includedir@
 136 infodir = @infodir@
 137 install_sh = @install_sh@
 138 libdir = @libdir@
 139 libexecdir = @libexecdir@
 140 localedir = @localedir@
 141 localstatedir = @localstatedir@
 142 mandir = @mandir@
 143 mkdir_p = @mkdir_p@
 144 oldincludedir = @oldincludedir@
 145 pdfdir = @pdfdir@
 146 prefix = @prefix@
 147 program_transform_name = @program_transform_name@
 148 psdir = @psdir@
 149 sbindir = @sbindir@
 150 sharedstatedir = @sharedstatedir@
 151 srcdir = @srcdir@
 152 sysconfdir = @sysconfdir@
 153 target = @target@
 154 target_alias = @target_alias@
 155 target_cpu = @target_cpu@
 156 target_os = @target_os@
 157 target_vendor = @target_vendor@
 158 top_build_prefix = @top_build_prefix@
 159 top_builddir = @top_builddir@
 160 top_srcdir = @top_srcdir@
 161
 162 # installed documentation
 163 #
 164 dist_pkgdata_DATA = COPYING LICENSING.txt README.txt COPYING README_stack.txt README_malloc.txt README_win32.txt
 165 all: all-am
 166
 167 .SUFFIXES:
 168 $(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
 169         @for dep in $?; do \
 170           case '$(am__configure_deps)' in \
 171             *$$dep*) \
 172               ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
 173                 && { if test -f $@; then exit 0; else break; fi; }; \
 174               exit 1;; \
 175           esac; \
 176         done; \
 177         echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  doc/Makefile'; \
 178         cd $(top_srcdir) && \
 179           $(AUTOMAKE) --gnu  doc/Makefile
 180 .PRECIOUS: Makefile
 181 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 182         @case '$?' in \
 183           *config.status*) \
 184             cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
 185           *) \
 186             echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
 187             cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
 188         esac;
 189
 190 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 191         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 192
 193 $(top_srcdir)/configure:  $(am__configure_deps)
 194         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 195 $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
 196         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 197 install-dist_pkgdataDATA: $(dist_pkgdata_DATA)
 198         @$(NORMAL_INSTALL)
 199         test -z "$(pkgdatadir)" || $(MKDIR_P) "$(DESTDIR)$(pkgdatadir)"
 200         @list='$(dist_pkgdata_DATA)'; for p in $$list; do \
 201           if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 202           f=$(am__strip_dir) \
 203           echo " $(dist_pkgdataDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pkgdatadir)/$$f'"; \
 204           $(dist_pkgdataDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pkgdatadir)/$$f"; \
 205         done
 206
 207 uninstall-dist_pkgdataDATA:
 208         @$(NORMAL_UNINSTALL)
 209         @list='$(dist_pkgdata_DATA)'; for p in $$list; do \
 210           f=$(am__strip_dir) \
 211           echo " rm -f '$(DESTDIR)$(pkgdatadir)/$$f'"; \
 212           rm -f "$(DESTDIR)$(pkgdatadir)/$$f"; \
 213         done
 214 tags: TAGS
 215 TAGS:
 216
 217 ctags: CTAGS
 218 CTAGS:
 219
 220
 221 distdir: $(DISTFILES)
 222         @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 223         topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 224         list='$(DISTFILES)'; \
 225           dist_files=`for file in $$list; do echo $$file; done | \
 226           sed -e "s|^$$srcdirstrip/||;t" \
 227               -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
 228         case $$dist_files in \
 229           */*) $(MKDIR_P) `echo "$$dist_files" | \
 230                            sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
 231                            sort -u` ;; \
 232         esac; \
 233         for file in $$dist_files; do \
 234           if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 235           if test -d $$d/$$file; then \
 236             dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
 237             if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
 238               cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
 239             fi; \
 240             cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
 241           else \
 242             test -f $(distdir)/$$file \
 243             || cp -p $$d/$$file $(distdir)/$$file \
 244             || exit 1; \
 245           fi; \
 246         done
 247 check-am: all-am
 248 check: check-am
 249 all-am: Makefile $(DATA)
 250 installdirs:
 251         for dir in "$(DESTDIR)$(pkgdatadir)"; do \
 252           test -z "$$dir" || $(MKDIR_P) "$$dir"; \
 253         done
 254 install: install-am
 255 install-exec: install-exec-am
 256 install-data: install-data-am
 257 uninstall: uninstall-am
 258
 259 install-am: all-am
 260         @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
 261
 262 installcheck: installcheck-am
 263 install-strip:
 264         $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 265           install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 266           `test -z '$(STRIP)' || \
 267             echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
 268 mostlyclean-generic:
 269
 270 clean-generic:
 271
 272 distclean-generic:
 273         -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
 274
 275 maintainer-clean-generic:
 276         @echo "This command is intended for maintainers to use"
 277         @echo "it deletes files that may require special tools to rebuild."
 278 clean: clean-am
 279
 280 clean-am: clean-generic mostlyclean-am
 281
 282 distclean: distclean-am
 283         -rm -f Makefile
 284 distclean-am: clean-am distclean-generic
 285
 286 dvi: dvi-am
 287
 288 dvi-am:
 289
 290 html: html-am
 291
 292 info: info-am
 293
 294 info-am:
 295
 296 install-data-am: install-dist_pkgdataDATA
 297
 298 install-dvi: install-dvi-am
 299
 300 install-exec-am:
 301
 302 install-html: install-html-am
 303
 304 install-info: install-info-am
 305
 306 install-man:
 307
 308 install-pdf: install-pdf-am
 309
 310 install-ps: install-ps-am
 311
 312 installcheck-am:
 313
 314 maintainer-clean: maintainer-clean-am
 315         -rm -f Makefile
 316 maintainer-clean-am: distclean-am maintainer-clean-generic
 317
 318 mostlyclean: mostlyclean-am
 319
 320 mostlyclean-am: mostlyclean-generic
 321
 322 pdf: pdf-am
 323
 324 pdf-am:
 325
 326 ps: ps-am
 327
 328 ps-am:
 329
 330 uninstall-am: uninstall-dist_pkgdataDATA
 331
 332 .MAKE: install-am install-strip
 333
 334 .PHONY: all all-am check check-am clean clean-generic distclean \
 335         distclean-generic distdir dvi dvi-am html html-am info info-am \
 336         install install-am install-data install-data-am \
 337         install-dist_pkgdataDATA install-dvi install-dvi-am \
 338         install-exec install-exec-am install-html install-html-am \
 339         install-info install-info-am install-man install-pdf \
 340         install-pdf-am install-ps install-ps-am install-strip \
 341         installcheck installcheck-am installdirs maintainer-clean \
 342         maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
 343         pdf-am ps ps-am uninstall uninstall-am \
 344         uninstall-dist_pkgdataDATA
 345
 346 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 347 # Otherwise a system limit (for SysV at least) may be exceeded.
 348 .NOEXPORT: