1 # This is the original manually generated Makefile. It may still be used
2 # to build the collector.
5 # gc.a - builds basic library
6 # c++ - adds C++ interface to library
7 # cords - adds cords (heavyweight strings) to library
8 # test - prints porting information, then builds basic version of gc.a,
9 # and runs some tests of collector and cords. Does not add cords or
10 # c++ interface to gc.a
11 # cord/de - builds dumb editor based on cords.
13 # ABI_FLAG should be the cc flag that specifies the ABI. On most
14 # platforms this will be the empty string. Possible values:
15 # +DD64 for 64-bit executable on HP/UX.
16 # -n32, -n64, -o32 for SGI/MIPS ABIs.
18 AS_ABI_FLAG=$(ABI_FLAG)
19 # ABI flag for assembler. On HP/UX this is +A64 for 64 bit
25 # The above doesn't work with gas, which doesn't run cpp.
26 # Define AS as `gcc -c -x assembler-with-cpp' instead.
28 # Redefining srcdir allows object code for the nonPCR version of the collector
29 # to be generated in different directories.
33 # Atomic_ops installation directory. If this doesn't exist, we create
34 # it from the included libatomic_ops distribution.
36 AO_SRC_DIR=$(srcdir)/libatomic_ops-$(AO_VERSION)
37 AO_INSTALL_DIR=$(srcdir)/libatomic_ops-install
39 CFLAGS= -O -I$(srcdir)/include -I$(AO_INSTALL_DIR)/include -DATOMIC_UNCOLLECTABLE -DNO_EXECUTE_PERMISSION -DALL_INTERIOR_POINTERS
41 # To build the parallel collector on Linux, add to the above:
42 # -DGC_LINUX_THREADS -DPARALLEL_MARK -DTHREAD_LOCAL_ALLOC
43 # To build the thread-capable preload library that intercepts
44 # malloc, add -DGC_USE_DLOPEN_WRAP -DREDIRECT_MALLOC=GC_malloc -fpic
45 # To build the parallel collector in a static library on HP/UX,
47 # -DGC_HPUX_THREADS -DTHREAD_LOCAL_ALLOC -D_POSIX_C_SOURCE=199506L -mt
48 # FIXME: PARALLEL_MARK currently broken on HP/UX.
49 # To build the thread-safe collector on Tru64, add to the above:
50 # -pthread -DGC_OSF1_THREADS
52 # HOSTCC and HOSTCFLAGS are used to build executables that will be run as
53 # part of the build process, i.e. on the build machine. These will usually
54 # be the same as CC and CFLAGS, except in a cross-compilation environment.
55 # Note that HOSTCFLAGS should include any -D flags that affect thread support.
59 # For dynamic library builds, it may be necessary to add flags to generate
60 # PIC code, e.g. -fPIC on Linux.
62 # Setjmp_test may yield overly optimistic results when compiled
63 # without optimization.
65 # These define arguments influence the collector configuration:
66 # -DFIND_LEAK causes GC_find_leak to be initially set.
67 # This causes the collector to assume that all inaccessible
68 # objects should have been explicitly deallocated, and reports exceptions.
69 # Finalization and the test program are not usable in this mode.
70 # -DGC_SOLARIS_THREADS enables support for Solaris pthreads.
71 # Must also define -D_REENTRANT.
72 # -DGC_IRIX_THREADS enables support for Irix pthreads. See README.irix.
73 # -DGC_HPUX_THREADS enables support for HP/UX 11 pthreads.
74 # Also requires -D_REENTRANT or -D_POSIX_C_SOURCE=199506L. See README.hp.
75 # -DGC_LINUX_THREADS enables support for Xavier Leroy's Linux threads.
76 # see README.linux. -D_REENTRANT may also be required.
77 # -DGC_OSF1_THREADS enables support for Tru64 pthreads.
78 # -DGC_FREEBSD_THREADS enables support for FreeBSD pthreads.
79 # Appeared to run into some underlying thread problems.
80 # -DGC_DARWIN_THREADS enables support for Mac OS X pthreads.
81 # -DGC_AIX_THREADS enables support for IBM AIX threads.
82 # -DGC_DGUX386_THREADS enables support for DB/UX on I386 threads.
84 # -DGC_WIN32_THREADS enables support for win32 threads. That makes sense
85 # for this Makefile only under Cygwin.
86 # -DGC_THREADS should set the appropriate one of the above macros.
87 # It assumes pthreads for Solaris.
88 # -DALL_INTERIOR_POINTERS allows all pointers to the interior
89 # of objects to be recognized. (See gc_priv.h for consequences.)
90 # Alternatively, GC_all_interior_pointers can be set at process
91 # initialization time.
92 # -DSMALL_CONFIG tries to tune the collector for small heap sizes,
93 # usually causing it to use less space in such situations.
94 # Incremental collection no longer works in this case.
95 # -DLARGE_CONFIG tunes the collector for unusually large heaps.
96 # Necessary for heaps larger than about 500 MB on most machines.
97 # Recommended for heaps larger than about 64 MB.
98 # -DDONT_ADD_BYTE_AT_END is meaningful only with -DALL_INTERIOR_POINTERS or
99 # GC_all_interior_pointers = 1. Normally -DALL_INTERIOR_POINTERS
100 # causes all objects to be padded so that pointers just past the end of
101 # an object can be recognized. This can be expensive. (The padding
102 # is normally more than one byte due to alignment constraints.)
103 # -DDONT_ADD_BYTE_AT_END disables the padding.
104 # -DNO_EXECUTE_PERMISSION may cause some or all of the heap to not
105 # have execute permission, i.e. it may be impossible to execute
106 # code from the heap. Currently this only affects the incremental
107 # collector on UNIX machines. It may greatly improve its performance,
108 # since this may avoid some expensive cache synchronization.
109 # -DGC_NO_OPERATOR_NEW_ARRAY declares that the C++ compiler does not support
110 # the new syntax "operator new[]" for allocating and deleting arrays.
111 # See gc_cpp.h for details. No effect on the C part of the collector.
112 # This is defined implicitly in a few environments. Must also be defined
113 # by clients that use gc_cpp.h.
114 # -DREDIRECT_MALLOC=X causes malloc to be defined as alias for X.
115 # Unless the following macros are defined, realloc is also redirected
116 # to GC_realloc, and free is redirected to GC_free.
117 # Calloc and strdup are redefined in terms of the new malloc. X should
118 # be either GC_malloc or GC_malloc_uncollectable, or
119 # GC_debug_malloc_replacement. (The latter invokes GC_debug_malloc
120 # with dummy source location information, but still results in
121 # properly remembered call stacks on Linux/X86 and Solaris/SPARC.
122 # It requires that the following two macros also be used.)
123 # The former is occasionally useful for working around leaks in code
124 # you don't want to (or can't) look at. It may not work for
125 # existing code, but it often does. Neither works on all platforms,
126 # since some ports use malloc or calloc to obtain system memory.
127 # (Probably works for UNIX, and win32.) If you build with DBG_HDRS_ALL,
128 # you should only use GC_debug_malloc_replacement as a malloc
130 # -DREDIRECT_REALLOC=X causes GC_realloc to be redirected to X.
131 # The canonical use is -DREDIRECT_REALLOC=GC_debug_realloc_replacement,
132 # together with -DREDIRECT_MALLOC=GC_debug_malloc_replacement to
133 # generate leak reports with call stacks for both malloc and realloc.
134 # This also requires the following:
135 # -DREDIRECT_FREE=X causes free to be redirected to X. The
136 # canonical use is -DREDIRECT_FREE=GC_debug_free.
137 # -DIGNORE_FREE turns calls to free into a noop. Only useful with
139 # -DNO_DEBUGGING removes GC_dump and the debugging routines it calls.
140 # Reduces code size slightly at the expense of debuggability.
141 # -DJAVA_FINALIZATION makes it somewhat safer to finalize objects out of
142 # order by specifying a nonstandard finalization mark procedure (see
143 # finalize.c). Objects reachable from finalizable objects will be marked
144 # in a separate postpass, and hence their memory won't be reclaimed.
145 # Not recommended unless you are implementing a language that specifies
146 # these semantics. Since 5.0, determines only the initial value
147 # of GC_java_finalization variable.
148 # -DFINALIZE_ON_DEMAND causes finalizers to be run only in response
149 # to explicit GC_invoke_finalizers() calls.
150 # In 5.0 this became runtime adjustable, and this only determines the
151 # initial value of GC_finalize_on_demand.
152 # -DATOMIC_UNCOLLECTABLE includes code for GC_malloc_atomic_uncollectable.
153 # This is useful if either the vendor malloc implementation is poor,
154 # or if REDIRECT_MALLOC is used.
155 # -DMARK_BIT_PER_GRANULE requests that a mark bit (or often byte)
156 # be allocated for each allocation granule, as opposed to each object.
157 # This often improves speed, possibly at some cost in space and/or
158 # cache footprint. Normally it is best to let this decision be
159 # made automatically depending on platform.
160 # -DMARK_BIT_PER_OBJ requests that a mark bit be allocated for each
161 # object instead of allocation granule. The opposiet of
162 # MARK_BIT_PER_GRANULE.
163 # -DHBLKSIZE=ddd, where ddd is a power of 2 between 512 and 16384, explicitly
164 # sets the heap block size. Each heap block is devoted to a single size and
165 # kind of object. For the incremental collector it makes sense to match
166 # the most likely page size. Otherwise large values result in more
167 # fragmentation, but generally better performance for large heaps.
168 # -DUSE_MMAP use MMAP instead of sbrk to get new memory.
169 # Works for Solaris and Irix.
170 # -DUSE_MUNMAP causes memory to be returned to the OS under the right
171 # circumstances. This currently disables VM-based incremental collection.
172 # This is currently experimental, and works only under some Unix,
173 # Linux and Windows versions.
174 # -DMMAP_STACKS (for Solaris threads) Use mmap from /dev/zero rather than
175 # GC_scratch_alloc() to get stack memory.
176 # -DPRINT_BLACK_LIST Whenever a black list entry is added, i.e. whenever
177 # the garbage collector detects a value that looks almost, but not quite,
178 # like a pointer, print both the address containing the value, and the
179 # value of the near-bogus-pointer. Can be used to identifiy regions of
180 # memory that are likely to contribute misidentified pointers.
181 # -DKEEP_BACK_PTRS Add code to save back pointers in debugging headers
182 # for objects allocated with the debugging allocator. If all objects
183 # through GC_MALLOC with GC_DEBUG defined, this allows the client
184 # to determine how particular or randomly chosen objects are reachable
185 # for debugging/profiling purposes. The gc_backptr.h interface is
186 # implemented only if this is defined.
187 # -DGC_ASSERTIONS Enable some internal GC assertion checking. Currently
188 # this facility is only used in a few places. It is intended primarily
189 # for debugging of the garbage collector itself, but could also
190 # -DDBG_HDRS_ALL Make sure that all objects have debug headers. Increases
191 # the reliability (from 99.9999% to 100% mod. bugs) of some of the debugging
192 # code (especially KEEP_BACK_PTRS). Makes -DSHORT_DBG_HDRS possible.
193 # Assumes that all client allocation is done through debugging
195 # -DSHORT_DBG_HDRS Assume that all objects have debug headers. Shorten
196 # the headers to minimize object size, at the expense of checking for
197 # writes past the end of an object. This is intended for environments
198 # in which most client code is written in a "safe" language, such as
199 # Scheme or Java. Assumes that all client allocation is done using
200 # the GC_debug_ functions, or through the macros that expand to these,
201 # or by redirecting malloc to GC_debug_malloc_replacement.
202 # (Also eliminates the field for the requested object size.)
203 # occasionally be useful for debugging of client code. Slows down the
204 # collector somewhat, but not drastically.
205 # -DSAVE_CALL_COUNT=<n> Set the number of call frames saved with objects
206 # allocated through the debugging interface. Affects the amount of
207 # information generated in leak reports. Only matters on platforms
208 # on which we can quickly generate call stacks, currently Linux/(X86 & SPARC)
209 # and Solaris/SPARC and platforms that provide execinfo.h.
210 # Default is zero. On X86, client
211 # code should NOT be compiled with -fomit-frame-pointer.
212 # -DSAVE_CALL_NARGS=<n> Set the number of functions arguments to be
213 # saved with each call frame. Default is zero. Ignored if we
214 # don't know how to retrieve arguments on the platform.
215 # -DCHECKSUMS reports on erroneously clear dirty bits, and unexpectedly
216 # altered stubborn objects, at substantial performance cost.
217 # Use only for debugging of the incremental collector.
218 # -DGC_GCJ_SUPPORT includes support for gcj (and possibly other systems
219 # that include a pointer to a type descriptor in each allocated object).
220 # Building this way requires an ANSI C compiler.
221 # -DUSE_I686_PREFETCH causes the collector to issue Pentium III style
222 # prefetch instructions. No effect except on X86 Linux platforms.
223 # Assumes a very recent gcc-compatible compiler and assembler.
224 # (Gas prefetcht0 support was added around May 1999.)
225 # Empirically the code appears to still run correctly on Pentium II
226 # processors, though with no performance benefit. May not run on other
227 # X86 processors? In some cases this improves performance by
229 # -DUSE_3DNOW_PREFETCH causes the collector to issue AMD 3DNow style
230 # prefetch instructions. Same restrictions as USE_I686_PREFETCH.
231 # Minimally tested. Didn't appear to be an obvious win on a K6-2/500.
232 # -DUSE_PPC_PREFETCH causes the collector to issue PowerPC style
233 # prefetch instructions. No effect except on PowerPC OS X platforms.
234 # Performance impact untested.
235 # -DGC_USE_LD_WRAP in combination with the old flags listed in README.linux
236 # causes the collector some system and pthread calls in a more transparent
237 # fashion than the usual macro-based approach. Requires GNU ld, and
238 # currently probably works only with Linux.
239 # -DGC_USE_DLOPEN_WRAP causes the collector to redefine malloc and intercepted
240 # pthread routines with their real names, and causes it to use dlopen
241 # and dlsym to refer to the original versions. This makes it possible to
242 # build an LD_PRELOADable malloc replacement library.
243 # -DTHREAD_LOCAL_ALLOC defines GC_malloc(), GC_malloc_atomic()
244 # and GC_gcj_malloc() to use a per-thread set of free-lists.
245 # These then allocate in a way that usually does not involve
246 # acquisition of a global lock. Currently supported only on platforms
247 # such as Linux that use pthread_support.c. Recommended for multiprocessors.
248 # Requires explicit GC_INIT() call.
249 # -DUSE_COMPILER_TLS causes thread local allocation to use compiler-supported
250 # "__thread" thread-local variables. This is the default in HP/UX. It
251 # may help performance on recent Linux installations. (It failed for
252 # me on RedHat 8, but appears to work on RedHat 9.)
253 # -DPARALLEL_MARK allows the marker to run in multiple threads. Recommended
254 # for multiprocessors. Currently requires Linux on X86 or IA64, though
255 # support for other Posix platforms should be fairly easy to add,
256 # if the thread implementation is otherwise supported.
257 # -DNO_GETENV prevents the collector from looking at environment variables.
258 # These may otherwise alter its configuration, or turn off GC altogether.
259 # I don't know of a reason to disable this, except possibly if the
260 # resulting process runs as a privileged user?
261 # -DUSE_GLOBAL_ALLOC. Win32 only. Use GlobalAlloc instead of
262 # VirtualAlloc to allocate the heap. May be needed to work around
263 # a Windows NT/2000 issue. Incompatible with USE_MUNMAP.
264 # See README.win32 for details.
265 # -DMAKE_BACK_GRAPH. Enable GC_PRINT_BACK_HEIGHT environment variable.
266 # See README.environment for details. Experimental. Limited platform
267 # support. Implies DBG_HDRS_ALL. All allocation should be done using
268 # the debug interface.
269 # -DSTUBBORN_ALLOC allows allocation of "hard to change" objects, and thus
270 # makes incremental collection easier. Was enabled by default until 6.0.
271 # Rarely used, to my knowledge.
272 # -DHANDLE_FORK attempts to make GC_malloc() work in a child process fork()ed
273 # from a multithreaded parent. Currently only supported by pthread_support.c.
274 # (Similar code should work on Solaris or Irix, but it hasn't been tried.)
275 # -DTEST_WITH_SYSTEM_MALLOC causes gctest to allocate (and leak) large chunks
276 # of memory with the standard system malloc. This will cause the root
277 # set and collected heap to grow significantly if malloced memory is
278 # somehow getting traced by the collector. This has no impact on the
279 # generated library; it only affects the test.
280 # -DNO_INCREMENTAL cases the gctest program to not invoke the incremental
281 # collector. This has no impact on the generated library, only on the
282 # test program. (This is often useful for debugging failures unrelated
283 # to incremental GC.)
284 # -DPOINTER_MASK=0x... causes candidate pointers to be ANDed with the
285 # given mask before being considered. If either this or the following
286 # macro is defined, it will be assumed that all pointers stored in
287 # the heap need to be processed this way. Stack and register pointers
288 # will be considered both with and without processing.
289 # These macros are normally needed only to support systems that use
290 # high-order pointer tags. EXPERIMENTAL.
291 # -DPOINTER_SHIFT=n causes the collector to left shift candidate pointers
292 # by the indicated amount before trying to interpret them. Applied
293 # after POINTER_MASK. EXPERIMENTAL. See also the preceding macro.
294 # -DENABLE_TRACE enables the GC_TRACE=addr environment setting to do its
295 # job. By default this is not supported in order to keep the marker as fast
297 # -DDARWIN_DONT_PARSE_STACK Causes the Darwin port to discover thread
298 # stack bounds in the same way as other pthread ports, without trying to
299 # walk the frames onthe stack. This is recommended only as a fallback
300 # for applications that don't support proper stack unwinding.
308 OBJS= alloc.o reclaim.o allchblk.o misc.o mach_dep.o os_dep.o mark_rts.o \
309 headers.o mark.o obj_map.o blacklst.o finalize.o new_hblk.o dbg_mlc.o \
310 malloc.o stubborn.o checksums.o pthread_support.o pthread_stop_world.o \
311 darwin_stop_world.o typd_mlc.o ptr_chck.o mallocx.o gcj_mlc.o specific.o \
312 gc_dlopen.o backgraph.o win32_threads.o thread_local_alloc.o
314 CSRCS= reclaim.c allchblk.c misc.c alloc.c mach_dep.c os_dep.c mark_rts.c \
315 headers.c mark.c obj_map.c pcr_interface.c blacklst.c finalize.c \
316 new_hblk.c real_malloc.c dyn_load.c dbg_mlc.c malloc.c stubborn.c \
317 checksums.c pthread_support.c pthread_stop_world.c darwin_stop_world.c \
318 typd_mlc.c ptr_chck.c mallocx.c gcj_mlc.c specific.c gc_dlopen.c \
319 backgraph.c win32_threads.c thread_local_alloc.c
321 CORD_SRCS= cord/cordbscs.c cord/cordxtra.c cord/cordprnt.c cord/de.c cord/cordtest.c include/cord.h include/ec.h include/private/cord_pos.h cord/de_win.c cord/de_win.h cord/de_cmds.h cord/de_win.ICO cord/de_win.RC
323 CORD_OBJS= cord/cordbscs.o cord/cordxtra.o cord/cordprnt.o
325 SRCS= $(CSRCS) mips_sgi_mach_dep.s rs6000_mach_dep.s alpha_mach_dep.S \
326 sparc_mach_dep.S include/gc.h include/gc_typed.h include/gc_tiny_fl.h \
327 include/private/gc_hdrs.h include/private/gc_priv.h \
328 include/private/gcconfig.h include/private/gc_pmark.h \
329 include/gc_inline.h include/gc_mark.h \
330 threadlibs.c if_mach.c if_not_there.c gc_cpp.cc include/gc_cpp.h \
331 gcname.c include/weakpointer.h include/private/gc_locks.h \
332 mips_ultrix_mach_dep.s \
333 include/new_gc_alloc.h include/gc_allocator.h \
334 include/javaxfc.h sparc_sunos4_mach_dep.s sparc_netbsd_mach_dep.s \
335 include/gc_backptr.h \
336 hpux_test_and_clear.s include/gc_gcj.h \
337 include/private/dbg_mlc.h \
338 include/private/specific.h \
339 include/leak_detector.h include/gc_amiga_redirects.h \
340 include/gc_pthread_redirects.h ia64_save_regs_in_stack.s \
341 include/gc_config_macros.h include/private/pthread_support.h \
342 include/private/pthread_stop_world.h include/private/darwin_semaphore.h \
343 include/private/darwin_stop_world.h include/private/thread_local_alloc.h \
346 DOC_FILES= README.QUICK doc/README.Mac doc/README.MacOSX doc/README.OS2 \
347 doc/README.amiga doc/README.cords doc/debugging.html \
348 doc/porting.html doc/overview.html \
349 doc/README.dj doc/README.hp doc/README.linux doc/README.rs6000 \
350 doc/README.sgi doc/README.solaris2 doc/README.uts \
351 doc/README.win32 doc/barrett_diagram doc/README \
352 doc/README.contributors doc/README.changes doc/gc.man \
353 doc/README.environment doc/tree.html doc/gcdescr.html \
354 doc/README.autoconf doc/README.macros doc/README.ews4800 \
355 doc/README.DGUX386 doc/README.arm.cross doc/leak.html \
356 doc/scale.html doc/gcinterface.html doc/README.darwin \
357 doc/simple_example.html
359 TESTS= tests/test.c tests/test_cpp.cc tests/trace_test.c \
360 tests/leak_test.c tests/thread_leak_test.c tests/middle.c
362 GNU_BUILD_FILES= configure.ac Makefile.am configure acinclude.m4 \
363 libtool.m4 install-sh configure.host Makefile.in \
364 aclocal.m4 config.sub config.guess \
365 include/include.am doc/doc.am \
366 ltmain.sh mkinstalldirs depcomp missing \
367 cord/cord.am tests/tests.am autogen.sh \
370 OTHER_MAKEFILES= OS2_MAKEFILE NT_MAKEFILE NT_THREADS_MAKEFILE gc.mak \
371 BCC_MAKEFILE EMX_MAKEFILE WCC_MAKEFILE Makefile.dj \
372 PCR-Makefile SMakefile.amiga Makefile.DLLs \
373 digimars.mak Makefile.direct NT_STATIC_THREADS_MAKEFILE \
374 configure_atomic_ops.sh
375 # Makefile and Makefile.direct are copies of each other.
377 OTHER_FILES= Makefile setjmp_t.c callprocs \
378 MacProjects.sit.hqx MacOS.c \
379 Mac_files/datastart.c Mac_files/dataend.c \
380 Mac_files/MacOS_config.h Mac_files/MacOS_Test_config.h \
381 add_gc_prefix.c gc_cpp.cpp \
382 version.h AmigaOS.c mscvc_dbg.c include/private/msvc_dbg.h \
383 $(TESTS) $(GNU_BUILD_FILES) $(OTHER_MAKEFILES)
385 CORD_INCLUDE_FILES= $(srcdir)/include/gc.h $(srcdir)/include/cord.h \
386 $(srcdir)/include/ec.h $(srcdir)/include/private/cord_pos.h
388 UTILS= if_mach if_not_there threadlibs
390 # Libraries needed for curses applications. Only needed for de.
391 CURSES= -lcurses -ltermlib
393 # The following is irrelevant on most systems. But a few
394 # versions of make otherwise fork the shell specified in
395 # the SHELL environment variable.
398 SPECIALCFLAGS = -I$(srcdir)/include -I$(AO_INSTALL_DIR)/include
399 # Alternative flags to the C compiler for mach_dep.c.
400 # Mach_dep.c often doesn't like optimization, and it's
401 # not time-critical anyway.
402 # Set SPECIALCFLAGS to -q nodirect_code on Encore.
406 # if AO_INSTALL_DIR doesn't exist, we assume that it is pointing to
407 # the default location, and we need to build
409 CC=$(CC) $(srcdir)/configure_atomic_ops.sh
410 cd $(AO_SRC_DIR); make CC=$(CC) install
412 LEAKFLAGS=$(CFLAGS) -DFIND_LEAK
414 BSD-pkg-all: bsd-libgc.a bsd-libleak.a
417 $(MAKE) CFLAGS="$(CFLAGS)" clean c++-t
421 $(MAKE) -f Makefile.direct CFLAGS="$(LEAKFLAGS)" clean c++-nt
422 mv gc.a bsd-libleak.a
424 BSD-pkg-install: BSD-pkg-all
425 ${CP} bsd-libgc.a libgc.a
426 ${INSTALL_DATA} libgc.a ${PREFIX}/lib
427 ${INSTALL_DATA} gc.h gc_cpp.h ${PREFIX}/include
428 ${INSTALL_MAN} doc/gc.man ${PREFIX}/man/man3/gc.3
430 pcr: PCR-Makefile include/private/gc_private.h include/private/gc_hdrs.h \
431 include/private/gc_locks.h include/gc.h include/private/gcconfig.h \
433 $(MAKE) -f PCR-Makefile depend
434 $(MAKE) -f PCR-Makefile
436 $(OBJS) tests/test.o dyn_load.o dyn_load_sunos53.o: \
437 $(srcdir)/include/private/gc_priv.h \
438 $(srcdir)/include/private/gc_hdrs.h $(srcdir)/include/private/gc_locks.h \
439 $(srcdir)/include/gc.h $(srcdir)/include/gc_pthread_redirects.h \
440 $(srcdir)/include/private/gcconfig.h $(srcdir)/include/gc_typed.h \
441 $(srcdir)/include/gc_config_macros.h Makefile $(AO_INSTALL_DIR)
442 # The dependency on Makefile is needed. Changing
443 # options affects the size of GC_arrays,
444 # invalidating all .o files that rely on gc_priv.h
446 mark.o typd_mlc.o finalize.o ptr_chck.o: $(srcdir)/include/gc_mark.h \
447 $(srcdir)/include/private/gc_pmark.h
449 specific.o pthread_support.o thread_local_alloc.o win32_threads.o: \
450 $(srcdir)/include/private/specific.h $(srcdir)/include/gc_inline.h \
451 $(srcdir)/include/private/thread_local_alloc.h
453 dbg_mlc.o gcj_mlc.o: $(srcdir)/include/private/dbg_mlc.h
455 tests/test.o: tests $(srcdir)/tests/test.c
456 $(CC) $(CFLAGS) -c $(srcdir)/tests/test.c
457 mv test.o tests/test.o
462 base_lib gc.a: $(OBJS) dyn_load.o $(UTILS)
465 cp $(AO_INSTALL_DIR)/lib/libatomic_ops.a gc.a
466 ./if_mach SPARC SOLARIS touch dont_ar_1
467 ./if_mach SPARC SOLARIS $(AR) rus gc.a $(OBJS) dyn_load.o
468 ./if_mach M68K AMIGA touch dont_ar_1
469 ./if_mach M68K AMIGA $(AR) -vrus gc.a $(OBJS) dyn_load.o
470 ./if_not_there dont_ar_1 $(AR) ru gc.a $(OBJS) dyn_load.o
471 ./if_not_there dont_ar_1 $(RANLIB) gc.a || cat /dev/null
472 # ignore ranlib failure; that usually means it doesn't exist, and isn't needed
474 cords: $(CORD_OBJS) cord/cordtest $(UTILS)
476 ./if_mach SPARC SOLARIS touch dont_ar_3
477 ./if_mach SPARC SOLARIS $(AR) rus gc.a $(CORD_OBJS)
478 ./if_mach M68K AMIGA touch dont_ar_3
479 ./if_mach M68K AMIGA $(AR) -vrus gc.a $(CORD_OBJS)
480 ./if_not_there dont_ar_3 $(AR) ru gc.a $(CORD_OBJS)
481 ./if_not_there dont_ar_3 $(RANLIB) gc.a || cat /dev/null
483 gc_cpp.o: $(srcdir)/gc_cpp.cc $(srcdir)/include/gc_cpp.h $(srcdir)/include/gc.h Makefile
484 $(CXX) -c $(CXXFLAGS) $(srcdir)/gc_cpp.cc
486 test_cpp: $(srcdir)/tests/test_cpp.cc $(srcdir)/include/gc_cpp.h gc_cpp.o $(srcdir)/include/gc.h \
489 ./if_mach HP_PA HPUX $(CXX) $(CXXFLAGS) -o test_cpp $(srcdir)/tests/test_cpp.cc gc_cpp.o gc.a -ldld `./threadlibs`
490 ./if_not_there test_cpp $(CXX) $(CXXFLAGS) -o test_cpp $(srcdir)/tests/test_cpp.cc gc_cpp.o gc.a `./threadlibs`
496 @echo "Use ./test_cpp 1 to test the leak library"
498 c++: gc_cpp.o $(srcdir)/include/gc_cpp.h test_cpp
500 ./if_mach SPARC SOLARIS touch dont_ar_4
501 ./if_mach SPARC SOLARIS $(AR) rus gc.a gc_cpp.o
502 ./if_mach M68K AMIGA touch dont_ar_4
503 ./if_mach M68K AMIGA $(AR) -vrus gc.a gc_cpp.o
504 ./if_not_there dont_ar_4 $(AR) ru gc.a gc_cpp.o
505 ./if_not_there dont_ar_4 $(RANLIB) gc.a || cat /dev/null
509 dyn_load_sunos53.o: dyn_load.c
510 $(CC) $(CFLAGS) -DSUNOS53_SHARED_LIB -c $(srcdir)/dyn_load.c -o $@
512 # SunOS5 shared library version of the collector
513 sunos5gc.so: $(OBJS) dyn_load_sunos53.o
514 $(CC) -G -o sunos5gc.so $(OBJS) dyn_load_sunos53.o $(AO_INSTALL_DIR)/lib/libatomic_ops.a -ldl
515 ln sunos5gc.so libgc.so
517 # Alpha/OSF shared library version of the collector
518 libalphagc.so: $(OBJS)
519 ld -shared -o libalphagc.so $(OBJS) dyn_load.o -lc
520 ln libalphagc.so libgc.so
522 # IRIX shared library version of the collector
523 libirixgc.so: $(OBJS) dyn_load.o
524 ld -shared $(ABI_FLAG) -o libirixgc.so $(OBJS) dyn_load.o -lc
525 ln libirixgc.so libgc.so
527 # Linux shared library version of the collector
528 liblinuxgc.so: $(OBJS) dyn_load.o
529 gcc -shared -o liblinuxgc.so $(OBJS) dyn_load.o
530 ln liblinuxgc.so libgc.so
532 # Build gctest with dynamic library
534 $(CC) $(CFLAGS) -o gctest tests/test.c libgc.so `./threadlibs`
537 # Alternative Linux rule. This is preferable, but is likely to break the
538 # Makefile for some non-linux platforms.
539 # LIBOBJS= $(patsubst %.o, %.lo, $(OBJS))
541 #.SUFFIXES: .lo $(SUFFIXES)
544 # $(CC) $(CFLAGS) $(CPPFLAGS) -fPIC -c $< -o $@
546 # liblinuxgc.so: $(LIBOBJS) dyn_load.lo
547 # gcc -shared -Wl,-soname=libgc.so.0 -o libgc.so.0 $(LIBOBJS) dyn_load.lo
548 # touch liblinuxgc.so
550 mach_dep.o: $(srcdir)/mach_dep.c $(srcdir)/mips_sgi_mach_dep.s \
551 $(srcdir)/mips_ultrix_mach_dep.s \
552 $(srcdir)/rs6000_mach_dep.s \
553 $(srcdir)/sparc_mach_dep.S $(srcdir)/sparc_sunos4_mach_dep.s \
554 $(srcdir)/ia64_save_regs_in_stack.s \
555 $(srcdir)/sparc_netbsd_mach_dep.s $(UTILS)
557 ./if_mach SPARC SOLARIS $(CC) -c -o mach_dep2.o $(srcdir)/sparc_mach_dep.S
558 ./if_mach SPARC OPENBSD $(AS) -o mach_dep2.o $(srcdir)/sparc_sunos4_mach_dep.s
559 ./if_mach SPARC NETBSD $(AS) -o mach_dep2.o $(srcdir)/sparc_netbsd_mach_dep.s
560 ./if_mach SPARC "" $(CC) -c -o mach_dep1.o $(SPECIALCFLAGS) $(srcdir)/mach_dep.c
561 ./if_mach SPARC "" ld -r -o mach_dep.o mach_dep1.o mach_dep2.o
562 ./if_mach IA64 "" as $(AS_ABI_FLAG) -o ia64_save_regs_in_stack.o $(srcdir)/ia64_save_regs_in_stack.s
563 ./if_mach IA64 "" $(CC) -c -o mach_dep1.o $(SPECIALCFLAGS) $(srcdir)/mach_dep.c
564 ./if_mach IA64 "" ld -r -o mach_dep.o mach_dep1.o ia64_save_regs_in_stack.o
565 ./if_not_there mach_dep.o $(CC) -c $(SPECIALCFLAGS) $(srcdir)/mach_dep.c
567 mark_rts.o: $(srcdir)/mark_rts.c $(UTILS)
569 -./if_mach ALPHA OSF1 $(CC) -c $(CFLAGS) -Wo,-notail $(srcdir)/mark_rts.c
570 ./if_not_there mark_rts.o $(CC) -c $(CFLAGS) $(srcdir)/mark_rts.c
571 # Work-around for DEC optimizer tail recursion elimination bug.
572 # The ALPHA-specific line should be removed if gcc is used.
579 cord/cordbscs.o: cord $(srcdir)/cord/cordbscs.c $(CORD_INCLUDE_FILES)
580 $(CC) $(CFLAGS) -c -I$(srcdir) $(srcdir)/cord/cordbscs.c
581 mv cordbscs.o cord/cordbscs.o
582 # not all compilers understand -o filename
584 cord/cordxtra.o: cord $(srcdir)/cord/cordxtra.c $(CORD_INCLUDE_FILES)
585 $(CC) $(CFLAGS) -c -I$(srcdir) $(srcdir)/cord/cordxtra.c
586 mv cordxtra.o cord/cordxtra.o
588 cord/cordprnt.o: cord $(srcdir)/cord/cordprnt.c $(CORD_INCLUDE_FILES)
589 $(CC) $(CFLAGS) -c -I$(srcdir) $(srcdir)/cord/cordprnt.c
590 mv cordprnt.o cord/cordprnt.o
592 cord/cordtest: $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a $(UTILS)
594 ./if_mach SPARC DRSNX $(CC) $(CFLAGS) -o cord/cordtest $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a -lucb
595 ./if_mach HP_PA HPUX $(CC) $(CFLAGS) -o cord/cordtest $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a -ldld `./threadlibs`
596 ./if_mach M68K AMIGA $(CC) $(CFLAGS) -UGC_AMIGA_MAKINGLIB -o cord/cordtest $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a `./threadlibs`
597 ./if_not_there cord/cordtest $(CC) $(CFLAGS) -o cord/cordtest $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a `./threadlibs`
599 cord/de: $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a $(UTILS)
601 ./if_mach SPARC DRSNX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a $(CURSES) -lucb `./threadlibs`
602 ./if_mach HP_PA HPUX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a $(CURSES) -ldld `./threadlibs`
603 ./if_mach POWERPC AIX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a -lcurses
604 ./if_mach POWERPC DARWIN $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a
605 ./if_mach I386 LINUX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a -lcurses `./threadlibs`
606 ./if_mach ALPHA LINUX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a -lcurses `./threadlibs`
607 ./if_mach IA64 LINUX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a -lcurses `./threadlibs`
608 ./if_mach M68K AMIGA $(CC) $(CFLAGS) -UGC_AMIGA_MAKINGLIB -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a -lcurses
609 ./if_not_there cord/de $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a $(CURSES) `./threadlibs`
611 if_mach: $(srcdir)/if_mach.c $(srcdir)/include/private/gcconfig.h
612 $(HOSTCC) $(HOSTCFLAGS) -o if_mach $(srcdir)/if_mach.c
614 threadlibs: $(srcdir)/threadlibs.c $(srcdir)/include/private/gcconfig.h Makefile
615 $(HOSTCC) $(HOSTCFLAGS) -o threadlibs $(srcdir)/threadlibs.c
617 if_not_there: $(srcdir)/if_not_there.c
618 $(HOSTCC) $(HOSTCFLAGS) -o if_not_there $(srcdir)/if_not_there.c
621 rm -f gc.a *.o *.exe tests/*.o gctest gctest_dyn_link test_cpp \
622 setjmp_test mon.out gmon.out a.out core if_not_there if_mach \
623 threadlibs $(CORD_OBJS) cord/cordtest cord/de
626 gctest: tests/test.o gc.a $(UTILS)
628 ./if_mach SPARC DRSNX $(CC) $(CFLAGS) -o gctest tests/test.o gc.a -lucb
629 ./if_mach HP_PA HPUX $(CC) $(CFLAGS) -o gctest tests/test.o gc.a -ldld `./threadlibs`
630 ./if_mach M68K AMIGA $(CC) $(CFLAGS) -UGC_AMIGA_MAKINGLIB -o gctest tests/test.o gc.a `./threadlibs`
631 ./if_not_there gctest $(CC) $(CFLAGS) -o gctest tests/test.o gc.a `./threadlibs`
633 # If an optimized setjmp_test generates a segmentation fault,
634 # odds are your compiler is broken. Gctest may still work.
635 # Try compiling setjmp_t.c unoptimized.
636 setjmp_test: $(srcdir)/setjmp_t.c $(srcdir)/include/gc.h $(UTILS) $(AO_INSTALL_DIR)
637 $(CC) $(CFLAGS) -o setjmp_test $(srcdir)/setjmp_t.c
639 test: KandRtest cord/cordtest
642 # Those tests that work even with a K&R C compiler:
643 KandRtest: setjmp_test gctest
647 add_gc_prefix: $(srcdir)/add_gc_prefix.c $(srcdir)/version.h
648 $(CC) -o add_gc_prefix $(srcdir)/add_gc_prefix.c
650 gcname: $(srcdir)/gcname.c $(srcdir)/version.h
651 $(CC) -o gcname $(srcdir)/gcname.c
653 #We assume this is being done from source directory.
654 dist gc.tar: $(SRCS) $(DOC_FILES) $(OTHER_FILES) add_gc_prefix gcname
655 cp Makefile Makefile.old
656 cp Makefile.direct Makefile
657 CC=$(CC) ./configure_atomic_ops.sh
658 cd $(AO_SRC_DIR); make dist
659 if test $(srcdir)/libatomic_ops-$(AO_VERSION) = $(AO_SRC_DIR); \
661 mv $(AO_SRC_DIR) $(AO_SRC_DIR).bak ; \
662 tar xvfz $(AO_SRC_DIR).bak/libatomic_ops-$(AO_VERSION).tar.gz ; \
664 tar xvfz $(AO_SRC_DIR)/libatomic_ops-$(AO_VERSION).tar.gz ; \
668 ./add_gc_prefix $(SRCS) $(DOC_FILES) $(OTHER_FILES) libatomic_ops-$(AO_VERSION) > /tmp/gc.tar-files
669 tar cvfh gc.tar `cat /tmp/gc.tar-files`
670 cp gc.tar `./gcname`.tar
680 lint: $(CSRCS) tests/test.c
681 lint -DLINT $(CSRCS) tests/test.c | egrep -v "possible pointer alignment problem|abort|exit|sbrk|mprotect|syscall|change in ANSI|improper alignment"
683 # BTL: added to test shared library version of collector.
684 # Currently works only under SunOS5. Requires GC_INIT call from statically
685 # loaded client code.
687 gctest_dyn_link: tests/test.o libgc.so
688 $(CC) -L$(ABSDIR) -R$(ABSDIR) -o gctest_dyn_link tests/test.o -lgc -ldl -lthread
690 gctest_irix_dyn_link: tests/test.o libirixgc.so
691 $(CC) -L$(ABSDIR) -o gctest_irix_dyn_link tests/test.o -lirixgc
693 # The following appear to be dead, especially since libgc_globals.h
694 # is apparently lost.
695 test_dll.o: tests/test.c libgc_globals.h
696 $(CC) $(CFLAGS) -DGC_USE_DLL -c tests/test.c -o test_dll.o
698 test_dll: test_dll.o libgc_dll.a libgc.dll
699 $(CC) test_dll.o -L$(ABSDIR) -lgc_dll -o test_dll
703 # Uncomment the following line to build a GNU win32 DLL
704 # include Makefile.DLLs
706 reserved_namespace: $(SRCS)
707 for file in $(SRCS) tests/test.c tests/test_cpp.cc; do \
708 sed s/GC_/_GC_/g < $$file > tmp; \
712 user_namespace: $(SRCS)
713 for file in $(SRCS) tests/test.c tests/test_cpp.cc; do \
714 sed s/_GC_/GC_/g < $$file > tmp; \