summary |
shortlog |
log |
commit | commitdiff |
tree
raw |
patch |
inline | side by side (from parent 1:
b246158)
option.
This patch converts the following patches to use PRTINK_IN_CAR
amd/serngeti_cheetah
msi/ms9185
msi/ms9828
supermicro/h8dmr
Signed-off-by: Marc Jones <marc.jones@amd.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3617
2b7e53f0-3cfb-0310-b3e9-
8179ed1497e1
##
## The Serial Console
##
##
## The Serial Console
##
-default CONFIG_USE_PRINTK_IN_CAR=0
+default CONFIG_USE_PRINTK_IN_CAR=1
# To Enable the Serial Console
default CONFIG_CONSOLE_SERIAL8250=1
# To Enable the Serial Console
default CONFIG_CONSOLE_SERIAL8250=1
#if CONFIG_USE_INIT == 0
#include "lib/memcpy.c"
#if CONFIG_USE_INIT == 0
#include "lib/memcpy.c"
- #if CONFIG_USE_PRINTK_IN_CAR == 1
- #include "lib/uart8250.c"
- #include "console/vtxprintf.c"
- #include "arch/i386/lib/printk_init.c"
- #endif
#endif
#include "arch/i386/lib/console.c"
#endif
#include "arch/i386/lib/console.c"
#include "option_table.h"
#include "pc80/mc146818rtc_early.c"
#include "option_table.h"
#include "pc80/mc146818rtc_early.c"
#if 0
static void post_code(uint8_t value) {
#if 1
#if 0
static void post_code(uint8_t value) {
#if 1
#if CONFIG_USE_INIT == 0
#include "lib/memcpy.c"
#if CONFIG_USE_INIT == 0
#include "lib/memcpy.c"
- #if CONFIG_USE_PRINTK_IN_CAR == 1
- #include "lib/uart8250.c"
- #include "console/vtxprintf.c"
- #include "arch/i386/lib/printk_init.c"
- #endif
#endif
#include "northbridge/amd/amdk8/debug.c"
#include "cpu/amd/mtrr/amd_earlymtrr.c"
#endif
#include "northbridge/amd/amdk8/debug.c"
#include "cpu/amd/mtrr/amd_earlymtrr.c"
uses CONFIG_PCI_64BIT_PREF_MEM
uses CONFIG_LB_MEM_TOPK
uses CONFIG_PCI_64BIT_PREF_MEM
uses CONFIG_LB_MEM_TOPK
+uses CONFIG_USE_PRINTK_IN_CAR
default DCACHE_RAM_BASE=0xcc000
default DCACHE_RAM_SIZE=0x04000
default DCACHE_RAM_GLOBAL_VAR_SIZE=0x01000
default DCACHE_RAM_BASE=0xcc000
default DCACHE_RAM_SIZE=0x04000
default DCACHE_RAM_GLOBAL_VAR_SIZE=0x01000
-default CONFIG_USE_INIT=0
+default CONFIG_USE_INIT=0\r
##
## Build code to setup a generic IOAPIC
##
## Build code to setup a generic IOAPIC
##
## The Serial Console
##
##
## The Serial Console
##
+default CONFIG_USE_PRINTK_IN_CAR=1
# To Enable the Serial Console
default CONFIG_CONSOLE_SERIAL8250=1
# To Enable the Serial Console
default CONFIG_CONSOLE_SERIAL8250=1
uses CONFIG_COMPRESSED_PAYLOAD_LZMA
uses CONFIG_COMPRESSED_PAYLOAD_NRV2B
uses CONFIG_PRECOMPRESSED_PAYLOAD
uses CONFIG_COMPRESSED_PAYLOAD_LZMA
uses CONFIG_COMPRESSED_PAYLOAD_NRV2B
uses CONFIG_PRECOMPRESSED_PAYLOAD
+uses CONFIG_USE_PRINTK_IN_CAR\r
## ROM_SIZE is the size of boot ROM that this board will use.
#512K bytes
## ROM_SIZE is the size of boot ROM that this board will use.
#512K bytes
default APIC_ID_OFFSET=0x10
default LIFT_BSP_APIC_ID=0
default APIC_ID_OFFSET=0x10
default LIFT_BSP_APIC_ID=0
##
## Build code to setup a generic IOAPIC
##
##
## Build code to setup a generic IOAPIC
##
##
## The Serial Console
##
##
## The Serial Console
##
+default CONFIG_USE_PRINTK_IN_CAR=1
+\r
# To Enable the Serial Console
default CONFIG_CONSOLE_SERIAL8250=1
# To Enable the Serial Console
default CONFIG_CONSOLE_SERIAL8250=1
default DCACHE_RAM_GLOBAL_VAR_SIZE=0x01000
default CONFIG_USE_INIT=0
default DCACHE_RAM_GLOBAL_VAR_SIZE=0x01000
default CONFIG_USE_INIT=0
-default CONFIG_AP_CODE_IN_CAR=0
+default CONFIG_AP_CODE_IN_CAR=1
default MEM_TRAIN_SEQ=1
default WAIT_BEFORE_CPUS_INIT=1
default MEM_TRAIN_SEQ=1
default WAIT_BEFORE_CPUS_INIT=1
##
## The Serial Console
##
##
## The Serial Console
##
-default CONFIG_USE_PRINTK_IN_CAR=0
+default CONFIG_USE_PRINTK_IN_CAR=1
# To Enable the Serial Console
default CONFIG_CONSOLE_SERIAL8250=1
# To Enable the Serial Console
default CONFIG_CONSOLE_SERIAL8250=1
romimage "normal"
option USE_FAILOVER_IMAGE=0
option USE_FALLBACK_IMAGE=0
romimage "normal"
option USE_FAILOVER_IMAGE=0
option USE_FALLBACK_IMAGE=0
- option ROM_IMAGE_SIZE=0x18000
+ option ROM_IMAGE_SIZE=0x20000
option COREBOOT_EXTRA_VERSION=".0-normal"
payload __PAYLOAD__
end
option COREBOOT_EXTRA_VERSION=".0-normal"
payload __PAYLOAD__
end
romimage "fallback"
option USE_FAILOVER_IMAGE=0
option USE_FALLBACK_IMAGE=1
romimage "fallback"
option USE_FAILOVER_IMAGE=0
option USE_FALLBACK_IMAGE=1
- option ROM_IMAGE_SIZE=0x18000
+ option ROM_IMAGE_SIZE=0x20000
option COREBOOT_EXTRA_VERSION=".0-fallback"
payload __PAYLOAD__
end
option COREBOOT_EXTRA_VERSION=".0-fallback"
payload __PAYLOAD__
end