#include <device/pci.h>
#include <device/pci_ops.h>
#include <device/pci_ids.h>
-
#include <pc80/mc146818rtc.h>
-
-#include "vt8231.h"
+#include <arch/ioapic.h>
#include "chip.h"
/* PIRQ init
*/
-void pci_assign_irqs(unsigned bus, unsigned slot, const unsigned char pIntAtoD[4]);
static const unsigned char southbridgeIrqs[4] = { 11, 5, 10, 12 };
static const unsigned char enetIrqs[4] = { 11, 5, 10, 12 };
static const unsigned char slotIrqs[4] = { 5, 10, 12, 11 };
static void pci_routing_fixup(struct device *dev)
{
- printk_info("%s: dev is %p\n", __FUNCTION__, dev);
+ printk(BIOS_INFO, "%s: dev is %p\n", __func__, dev);
if (dev) {
/* initialize PCI interupts - these assignments depend
- on the PCB routing of PINTA-D
+ on the PCB routing of PINTA-D
PINTA = IRQ11
PINTB = IRQ5
}
// Standard southbridge components
- printk_info("setting southbridge\n");
+ printk(BIOS_INFO, "setting southbridge\n");
pci_assign_irqs(0, 0x11, southbridgeIrqs);
// Ethernet built into southbridge
- printk_info("setting ethernet\n");
+ printk(BIOS_INFO, "setting ethernet\n");
pci_assign_irqs(0, 0x12, enetIrqs);
// PCI slot
- printk_info("setting pci slot\n");
+ printk(BIOS_INFO, "setting pci slot\n");
pci_assign_irqs(0, 0x14, slotIrqs);
- printk_info("%s: DONE\n", __FUNCTION__);
+ printk(BIOS_INFO, "%s: DONE\n", __func__);
}
static void vt8231_init(struct device *dev)
{
unsigned char enables;
- struct southbridge_via_vt8231_config *conf = dev->chip_info;
- printk_debug("vt8231 init\n");
+ printk(BIOS_DEBUG, "vt8231 init\n");
// enable the internal I/O decode
enables = pci_read_config8(dev, 0x6C);
enables |= 0x80;
pci_write_config8(dev, 0x6C, enables);
-
+
// Map 4MB of FLASH into the address space
pci_write_config8(dev, 0x41, 0x7f);
-
+
// Set bit 6 of 0x40, because Award does it (IO recovery time)
- // IMPORTANT FIX - EISA 0x4d0 decoding must be on so that PCI
+ // IMPORTANT FIX - EISA 0x4d0 decoding must be on so that PCI
// interrupts can be properly marked as level triggered.
enables = pci_read_config8(dev, 0x40);
pci_write_config8(dev, 0x40, enables);
-
+
// Set 0x42 to 0xf0 to match Award bios
enables = pci_read_config8(dev, 0x42);
enables |= 0xf0;
pci_write_config8(dev, 0x42, enables);
-
+
// Set bit 3 of 0x4a, to match award (dummy pci request)
enables = pci_read_config8(dev, 0x4a);
enables |= 0x08;
pci_write_config8(dev, 0x4a, enables);
-
+
// Set bit 3 of 0x4f to match award (use INIT# as cpu reset)
enables = pci_read_config8(dev, 0x4f);
enables |= 0x08;
pci_write_config8(dev, 0x4f, enables);
-
+
// Set 0x58 to 0x03 to match Award
pci_write_config8(dev, 0x58, 0x03);
-
+
// enable the ethernet/RTC
if (dev) {
enables = pci_read_config8(dev, 0x51);
- enables |= 0x18;
+ enables |= 0x18;
pci_write_config8(dev, 0x51, enables);
}
// enable IDE, since Linux won't do it.
// First do some more things to devfn (17,0)
- // note: this should already be cleared, according to the book.
+ // note: this should already be cleared, according to the book.
enables = pci_read_config8(dev, 0x50);
- printk_debug("IDE enable in reg. 50 is 0x%x\n", enables);
+ printk(BIOS_DEBUG, "IDE enable in reg. 50 is 0x%x\n", enables);
enables &= ~8; // need manifest constant here!
- printk_debug("set IDE reg. 50 to 0x%x\n", enables);
+ printk(BIOS_DEBUG, "set IDE reg. 50 to 0x%x\n", enables);
pci_write_config8(dev, 0x50, enables);
-
+
// set default interrupt values (IDE)
enables = pci_read_config8(dev, 0x4c);
- printk_debug("IRQs in reg. 4c are 0x%x\n", enables & 0xf);
- // clear out whatever was there.
+ printk(BIOS_DEBUG, "IRQs in reg. 4c are 0x%x\n", enables & 0xf);
+ // clear out whatever was there.
enables &= ~0xf;
enables |= 4;
- printk_debug("setting reg. 4c to 0x%x\n", enables);
+ printk(BIOS_DEBUG, "setting reg. 4c to 0x%x\n", enables);
pci_write_config8(dev, 0x4c, enables);
-
- // set up the serial port interrupts.
+
+ // set up the serial port interrupts.
// com2 to 3, com1 to 4
pci_write_config8(dev, 0x46, 0x04);
pci_write_config8(dev, 0x47, 0x03);
/* set up isa bus -- i/o recovery time, rom write enable, extend-ale */
pci_write_config8(dev, 0x40, 0x54);
//ethernet_fixup();
-
+
// Start the rtc
rtc_init(0);
}
+static void vt8231_read_resources(device_t dev)
+{
+ struct resource *res;
+
+ pci_dev_read_resources(dev);
+
+ res = new_resource(dev, 1);
+ res->base = 0x0UL;
+ res->size = 0x1000UL;
+ res->limit = 0xffffUL;
+ res->flags = IORESOURCE_IO | IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
+
+ res = new_resource(dev, 3); /* IOAPIC */
+ res->base = IO_APIC_ADDR;
+ res->size = 0x00001000;
+ res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
+}
+
static void southbridge_init(struct device *dev)
{
vt8231_init(dev);
}
static struct device_operations vt8231_lpc_ops = {
- .read_resources = pci_dev_read_resources,
+ .read_resources = vt8231_read_resources,
.set_resources = pci_dev_set_resources,
.enable_resources = pci_dev_enable_resources,
.init = &southbridge_init,