#include <stdint.h>
-
-/**
- * @def BIOS_SIZE_1M
- * @def BIOS_SIZE_2M
- * @def BIOS_SIZE_4M
- * @def BIOS_SIZE_8M
- */
-#define BIOS_SIZE_1M 0
-#define BIOS_SIZE_2M 1
-#define BIOS_SIZE_4M 3
-#define BIOS_SIZE_8M 7
-
-/* In SB800, default ROM size is 1M Bytes, if your platform ROM
- * bigger than 1M you have to set the ROM size outside CIMx module and
- * before AGESA module get call.
- */
-#ifndef BIOS_SIZE
-#if CONFIG_COREBOOT_ROMSIZE_KB_1024 == 1
- #define BIOS_SIZE BIOS_SIZE_1M
-#elif CONFIG_COREBOOT_ROMSIZE_KB_2048 == 1
- #define BIOS_SIZE BIOS_SIZE_2M
-#elif CONFIG_COREBOOT_ROMSIZE_KB_4096 == 1
- #define BIOS_SIZE BIOS_SIZE_4M
-#elif CONFIG_COREBOOT_ROMSIZE_KB_8192 == 1
- #define BIOS_SIZE BIOS_SIZE_8M
-#endif
-#endif
-
-/**
- * @def SPREAD_SPECTRUM
- * @brief
- * 0 - Disable Spread Spectrum function
- * 1 - Enable Spread Spectrum function
- */
-#define SPREAD_SPECTRUM 0
-
-/**
- * @def SB_HPET_TIMER
- * @breif
- * 0 - Disable hpet
- * 1 - Enable hpet
- */
-#define HPET_TIMER 1
-
-/**
- * @def USB_CONFIG
- * @brief bit[0-6] used to control USB
- * 0 - Disable
- * 1 - Enable
- * Usb Ohci1 Contoller (Bus 0 Dev 18 Func0) is define at BIT0
- * Usb Ehci1 Contoller (Bus 0 Dev 18 Func2) is define at BIT1
- * Usb Ohci2 Contoller (Bus 0 Dev 19 Func0) is define at BIT2
- * Usb Ehci2 Contoller (Bus 0 Dev 19 Func2) is define at BIT3
- * Usb Ohci3 Contoller (Bus 0 Dev 22 Func0) is define at BIT4
- * Usb Ehci3 Contoller (Bus 0 Dev 22 Func2) is define at BIT5
- * Usb Ohci4 Contoller (Bus 0 Dev 20 Func5) is define at BIT6
- */
-#define USB_CINFIG 0x7F
-
-/**
- * @def PCI_CLOCK_CTRL
- * @breif bit[0-4] used for PCI Slots Clock Control,
- * 0 - disable
- * 1 - enable
- * PCI SLOT 0 define at BIT0
- * PCI SLOT 1 define at BIT1
- * PCI SLOT 2 define at BIT2
- * PCI SLOT 3 define at BIT3
- * PCI SLOT 4 define at BIT4
- */
-#define PCI_CLOCK_CTRL 0x1F
-
-/**
- * @def SATA_CONTROLLER
- * @breif INCHIP Sata Controller
- */
-#ifndef SATA_CONTROLLER
- #define SATA_CONTROLLER CIMX_OPTION_ENABLED
-#endif
-
-/**
- * @def SATA_MODE
- * @breif INCHIP Sata Controller Mode
- * NOTE: DO NOT ALLOW SATA & IDE use same mode
- */
-#ifndef SATA_MODE
- #define SATA_MODE NATIVE_IDE_MODE
-#endif
-
-/**
- * @breif INCHIP Sata IDE Controller Mode
- */
-#define IDE_LEGACY_MODE 0
-#define IDE_NATIVE_MODE 1
-
-/**
- * @def SATA_IDE_MODE
- * @breif INCHIP Sata IDE Controller Mode
- * NOTE: DO NOT ALLOW SATA & IDE use same mode
- */
-#ifndef SATA_IDE_MODE
- #define SATA_IDE_MODE IDE_LEGACY_MODE
-#endif
-
-/**
- * @def EXTERNAL_CLOCK
- * @brief 00/10: Reference clock from crystal oscillator via
- * PAD_XTALI and PAD_XTALO
- *
- * @def INTERNAL_CLOCK
- * @brief 01/11: Reference clock from internal clock through
- * CP_PLL_REFCLK_P and CP_PLL_REFCLK_N via RDL
- */
-#define EXTERNAL_CLOCK 0x00
-#define INTERNAL_CLOCK 0x01
-
-/* NOTE: inagua have to using internal clock,
- * otherwise can not detect sata drive
- */
-#define SATA_CLOCK_SOURCE INTERNAL_CLOCK
-
-/**
- * @def SATA_PORT_MULT_CAP_RESERVED
- * @brief 1 ON, 0 0FF
- */
-#define SATA_PORT_MULT_CAP_RESERVED 1
-
-
-/**
- * @def AZALIA_AUTO
- * @brief Detect Azalia controller automatically.
- *
- * @def AZALIA_DISABLE
- * @brief Disable Azalia controller.
-
- * @def AZALIA_ENABLE
- * @brief Enable Azalia controller.
- */
-#define AZALIA_AUTO 0
-#define AZALIA_DISABLE 1
-#define AZALIA_ENABLE 2
-
-/**
- * @breif INCHIP HDA controller
- */
-#ifndef AZALIA_CONTROLLER
- #define AZALIA_CONTROLLER AZALIA_AUTO
-#endif
-
-/**
- * @def AZALIA_PIN_CONFIG
- * @brief
- * 0 - disable
- * 1 - enable
- */
-#ifndef AZALIA_PIN_CONFIG
- #define AZALIA_PIN_CONFIG 1
-#endif
-
-/**
- * @def AZALIA_SDIN_PIN
- * @brief
- * SDIN0 is define at BIT0 & BIT1
- * 00 - GPIO PIN
- * 01 - Reserved
- * 10 - As a Azalia SDIN pin
- * SDIN1 is define at BIT2 & BIT3
- * SDIN2 is define at BIT4 & BIT5
- * SDIN3 is define at BIT6 & BIT7
- */
-#ifndef AZALIA_SDIN_PIN
- //#define AZALIA_SDIN_PIN 0xAA
- #define AZALIA_SDIN_PIN 0x2A
-#endif
-
-/**
- * @def GPP_CONTROLLER
- */
-#ifndef GPP_CONTROLLER
- #define GPP_CONTROLLER CIMX_OPTION_ENABLED
-#endif
-
-/**
- * @def GPP_CFGMODE
- * @brief GPP Link Configuration
- * four possible configuration:
- * GPP_CFGMODE_X4000
- * GPP_CFGMODE_X2200
- * GPP_CFGMODE_X2110
- * GPP_CFGMODE_X1111
- */
-#ifndef GPP_CFGMODE
- #define GPP_CFGMODE GPP_CFGMODE_X1111
-#endif
-
-
/**
* @brief South Bridge CIMx configuration
*
projects / coreboot.git / blobdiff