Drop per-board ram_check() calls for now.

[coreboot.git] / src / mainboard / winent / pl6064 / romstage.c

diff --git a/src/mainboard/winent/pl6064/romstage.c b/src/mainboard/winent/pl6064/romstage.c
index 68cf6bb1568db716b221f5cf144eada2a9288092..cd615efa4b8a2dd47a5888ebbb1139f6cd5f9e7d 100644 (file)
--- a/src/mainboard/winent/pl6064/romstage.c
+++ b/src/mainboard/winent/pl6064/romstage.c
@@ -19,31 +19,26 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
  */
 
-#define ASSEMBLY 1
-#define __PRE_RAM__
-
 #include <stdint.h>
+#include <stdlib.h>
 #include <device/pci_def.h>
 #include <arch/io.h>
 #include <device/pnp_def.h>
 #include <arch/hlt.h>
-#include "pc80/serial.c"
-#include "arch/i386/lib/console.c"
-#include "lib/ramtest.c"
+#include <console/console.h>
+#include <lib.h>
 #include "cpu/x86/bist.h"
 #include "cpu/x86/msr.h"
 #include <cpu/amd/lxdef.h>
 #include <cpu/amd/geode_post_code.h>
 #include "southbridge/amd/cs5536/cs5536.h"
-
-#define ARRAY_SIZE(a) (sizeof(a) / sizeof((a)[0]))
-#define POST_CODE(x) outb(x, 0x80)
-#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
-
+#include <spd.h>
 #include "southbridge/amd/cs5536/cs5536_early_smbus.c"
 #include "southbridge/amd/cs5536/cs5536_early_setup.c"
 #include "superio/winbond/w83627hf/w83627hf_early_serial.c"
 
+#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
+
 static inline int spd_read_byte(unsigned int device, unsigned int address)
 {
        return smbus_read_byte(device, address);
@@ -52,8 +47,6 @@ static inline int spd_read_byte(unsigned int device, unsigned int address)
 #define ManualConf 0           /* Do automatic strapped PLL config */
 #define PLLMSRhi 0x00001490    /* Manual settings for the PLL */
 #define PLLMSRlo 0x02000030
-#define DIMM0 0xA0
-#define DIMM1 0xA2
 
 #include "northbridge/amd/lx/raminit.h"
 #include "northbridge/amd/lx/pll_reset.c"
@@ -61,52 +54,14 @@ static inline int spd_read_byte(unsigned int device, unsigned int address)
 #include "lib/generic_sdram.c"
 #include "cpu/amd/model_lx/cpureginit.c"
 #include "cpu/amd/model_lx/syspreinit.c"
+#include "cpu/amd/model_lx/msrinit.c"
 
-struct msrinit {
-            u32 msrnum;
-            msr_t msr;
-      };
-
-static const struct msrinit msr_table[] = 
-{
-       {CPU_RCONF_DEFAULT, {.hi = 0x24fffc02,.lo = 0x1000A000}}, /* Setup access to cache under 1MB.
-                                                                  * Rom Properties: Write Serialize, WriteProtect.
-                                                                  * RomBase: 0xFFFC0
-                                                                  * SysTop to RomBase Properties: Write Serialize, Cache Disable.
-                                                                  * SysTop: 0x000A0 
-                                                                  * System Memory Properties:  (Write Back) */
-       {CPU_RCONF_A0_BF,   {.hi = 0x00000000,.lo = 0x00000000}}, /* 0xA0000-0xBFFFF : (Write Back) */
-       {CPU_RCONF_C0_DF,   {.hi = 0x00000000,.lo = 0x00000000}}, /* 0xC0000-0xDFFFF : (Write Back) */
-       {CPU_RCONF_E0_FF,   {.hi = 0x00000000,.lo = 0x00000000}}, /* 0xE0000-0xFFFFF : (Write Back) */
-       
-       /* Setup access to memory under 1MB. Note: VGA hole at 0xA0000-0xBFFFF */
-       {MSR_GLIU0_BASE1,   {.hi = 0x20000000,.lo = 0x000fff80}}, // 0x00000-0x7FFFF
-       {MSR_GLIU0_BASE2,   {.hi = 0x20000000,.lo = 0x080fffe0}}, // 0x80000-0x9FFFF
-       {MSR_GLIU0_SHADOW,  {.hi = 0x2000FFFF,.lo = 0xFFFF0003}}, // 0xC0000-0xFFFFF
-       {MSR_GLIU1_BASE1,   {.hi = 0x20000000,.lo = 0x000fff80}}, // 0x00000-0x7FFFF
-       {MSR_GLIU1_BASE2,   {.hi = 0x20000000,.lo = 0x080fffe0}}, // 0x80000-0x9FFFF
-       {MSR_GLIU1_SHADOW,  {.hi = 0x2000FFFF,.lo = 0xFFFF0003}}, // 0xC0000-0xFFFFF
-};
-
-
-static void msr_init(void)
+void main(unsigned long bist)
 {
-  int i;
-       for (i = 0; i < ARRAY_SIZE(msr_table); i++)
-                           wrmsr(msr_table[i].msrnum, msr_table[i].msr);
-}
-
-static void mb_gpio_init(void)
-{
-       /* Early mainboard specific GPIO setup. */
-}
-
-void cache_as_ram_main(void)
-{
-       POST_CODE(0x01);
+       post_code(0x01);
 
        static const struct mem_controller memctrl[] = {
-               {.channel0 = {(0xa << 3) | 0, (0xa << 3) | 1}}
+               {.channel0 = {DIMM0, DIMM1}}
        };
 
        SystemPreInit();
@@ -119,19 +74,18 @@ void cache_as_ram_main(void)
         */
        w83627hf_set_clksel_48(SERIAL_DEV);
        w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
-       mb_gpio_init();
        uart_init();
        console_init();
 
+       /* Halt if there was a built in self test failure */
+       report_bist_failure(bist);
+
        pll_reset(ManualConf);
 
-       cpuRegInit();
+       cpuRegInit(0, DIMM0, DIMM1, DRAM_TERMINATED);
 
        sdram_initialize(1, memctrl);
 
-       /* Check memory. */
-       /* ram_check(0x00000000, 640 * 1024); */
-
        /* Memory is setup. Return to cache_as_ram.inc and continue to boot. */
        return;
 }