v2/src romfs->cbfs rename

[coreboot.git] / src / mainboard / tyan / s2875 / Options.lb

diff --git a/src/mainboard/tyan/s2875/Options.lb b/src/mainboard/tyan/s2875/Options.lb
index 7048a186e69c1378f57d97def8a63a39973c0a50..01daaa4e6fee1581d3003989d91ae1c1ff591370 100644 (file)
--- a/src/mainboard/tyan/s2875/Options.lb
+++ b/src/mainboard/tyan/s2875/Options.lb
@@ -1,4 +1,5 @@
 uses HAVE_MP_TABLE
+uses CONFIG_CBFS
 uses HAVE_PIRQ_TABLE
 uses USE_FALLBACK_IMAGE
 uses HAVE_FALLBACK_BOOT
@@ -16,9 +17,10 @@ uses ROM_SECTION_SIZE
 uses ROM_IMAGE_SIZE
 uses ROM_SECTION_SIZE
 uses ROM_SECTION_OFFSET
-uses CONFIG_ROM_STREAM
-uses CONFIG_ROM_STREAM_START
+uses CONFIG_ROM_PAYLOAD
+uses CONFIG_ROM_PAYLOAD_START
 uses CONFIG_COMPRESSED_PAYLOAD_LZMA
+uses CONFIG_PRECOMPRESSED_PAYLOAD
 uses PAYLOAD_SIZE
 uses _ROMBASE
 uses XIP_ROM_SIZE
@@ -34,7 +36,7 @@ uses MAINBOARD_VENDOR
 uses MAINBOARD
 uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
 uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses LINUXBIOS_EXTRA_VERSION
+uses COREBOOT_EXTRA_VERSION
 uses _RAMBASE
 uses TTYS0_BAUD
 uses TTYS0_BASE
@@ -50,7 +52,6 @@ uses CROSS_COMPILE
 uses CC
 uses HOSTCC
 uses OBJCOPY
-uses CONFIG_CHIP_NAME
 uses CONFIG_CONSOLE_VGA
 uses CONFIG_PCI_ROM_RUN
 uses HW_MEM_HOLE_SIZEK
@@ -59,6 +60,7 @@ uses USE_DCACHE_RAM
 uses DCACHE_RAM_BASE
 uses DCACHE_RAM_SIZE
 uses CONFIG_USE_INIT
+uses CONFIG_USE_PRINTK_IN_CAR
 
 ###
 ### Build options
@@ -83,7 +85,7 @@ default FALLBACK_SIZE=0x40000
 default HAVE_FALLBACK_BOOT=1
 
 ##
-## Build code to reset the motherboard from linuxBIOS
+## Build code to reset the motherboard from coreboot
 ##
 default HAVE_HARD_RESET=1
 
@@ -105,7 +107,7 @@ default HAVE_MP_TABLE=1
 default HAVE_OPTION_TABLE=1
 
 ##
-## Move the default LinuxBIOS cmos range off of AMD RTC registers
+## Move the default coreboot cmos range off of AMD RTC registers
 ##
 default LB_CKS_RANGE_START=49
 default LB_CKS_RANGE_END=122
@@ -120,9 +122,6 @@ default CONFIG_MAX_CPUS=4
 default CONFIG_MAX_PHYSICAL_CPUS=2
 default CONFIG_LOGICAL_CPUS=1
 
-#CHIP_NAME ?
-default CONFIG_CHIP_NAME=1
-
 #1G memory hole
 default HW_MEM_HOLE_SIZEK=0x100000
 
@@ -153,10 +152,10 @@ default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1
 default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2875
 
 ###
-### LinuxBIOS layout values
+### coreboot layout values
 ###
 
-## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy.
+## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
 default ROM_IMAGE_SIZE = 65536
 
 ##
@@ -175,14 +174,14 @@ default HEAP_SIZE=0x4000
 default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE
 
 ##
-## LinuxBIOS C code runs at this location in RAM
+## Coreboot C code runs at this location in RAM
 ##
 default _RAMBASE=0x00004000
 
 ##
 ## Load the payload from the ROM
 ##
-default CONFIG_ROM_STREAM = 1
+default CONFIG_ROM_PAYLOAD = 1
 
 ###
 ### Defaults of options that you may want to override in the target config file
@@ -199,6 +198,8 @@ default HOSTCC="gcc"
 ## 
 default CONFIG_GDB_STUB=0
 
+default CONFIG_USE_PRINTK_IN_CAR=1
+
 ##
 ## The Serial Console
 ##
@@ -224,7 +225,7 @@ default TTYS0_BASE=0x3f8
 default TTYS0_LCS=0x3
 
 ##
-### Select the linuxBIOS loglevel
+### Select the coreboot loglevel
 ##
 ## EMERG      1   system is unusable               
 ## ALERT      2   action must be taken immediately 
@@ -246,4 +247,9 @@ default  MAXIMUM_CONSOLE_LOGLEVEL=8
 default MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
 
 ### End Options.lb
+#
+# CBFS
+#
+#
+default CONFIG_CBFS=0
 end