* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-#define RAMINIT_SYSINFO 1
-
-#define K8_ALLOCATE_IO_RANGE 1
-
-#define QRANK_DIMM_SUPPORT 1
-
-#if CONFIG_LOGICAL_CPUS==1
-#define SET_NB_CFG_54 1
-#endif
-
-//used by init_cpus and fidvid
-#define K8_SET_FIDVID 1
-//if we want to wait for core1 done before DQS training, set it to 0
-#define K8_SET_FIDVID_CORE0_ONLY 1
-
#if CONFIG_K8_REV_F_SUPPORT == 1
#define K8_REV_F_SUPPORT_F0_F1_WORKAROUND 0
#endif
-
+
#include <stdint.h>
#include <string.h>
#include <device/pci_def.h>
#include <device/pnp_def.h>
#include <arch/romcc_io.h>
#include <cpu/x86/lapic.h>
-#include "option_table.h"
-#include "pc80/mc146818rtc_early.c"
-
-// for enable the FAN
-#include "southbridge/nvidia/mcp55/mcp55_early_smbus.c"
-
-#include "pc80/serial.c"
-#include "console/console.c"
-#include "lib/ramtest.c"
-
+#include <pc80/mc146818rtc.h>
+#include <console/console.h>
+#include <lib.h>
+#include <spd.h>
#include <cpu/amd/model_fxx_rev.h>
-
-//#include "southbridge/nvidia/mcp55/mcp55_early_smbus.c"
+#include "southbridge/nvidia/mcp55/mcp55_early_smbus.c" // for enable the FAN
#include "northbridge/amd/amdk8/raminit.h"
#include "cpu/amd/model_fxx/apic_timer.c"
#include "lib/delay.c"
-
#include "cpu/x86/lapic/boot_cpu.c"
#include "northbridge/amd/amdk8/reset_test.c"
#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
#include "superio/winbond/w83627hf/w83627hf_early_init.c"
-
#include "cpu/x86/bist.h"
-
#include "northbridge/amd/amdk8/debug.c"
-
-#include "cpu/amd/mtrr/amd_earlymtrr.c"
-
+#include "cpu/x86/mtrr/earlymtrr.c"
#include "northbridge/amd/amdk8/setup_resource_map.c"
-
-#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
-
#include "southbridge/nvidia/mcp55/mcp55_early_ctrl.c"
-static void memreset_setup(void)
-{
-}
+#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
+#define DUMMY_DEV PNP_DEV(0x2e, 0)
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
-}
-
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
- /* nothing to do */
-}
+static void memreset(int controllers, const struct mem_controller *ctrl) { }
+static void activate_spd_rom(const struct mem_controller *ctrl) { }
static inline int spd_read_byte(unsigned device, unsigned address)
{
}
#include "northbridge/amd/amdk8/amdk8_f.h"
-#include "northbridge/amd/amdk8/coherent_ht.c"
-
#include "northbridge/amd/amdk8/incoherent_ht.c"
-
+#include "northbridge/amd/amdk8/coherent_ht.c"
#include "northbridge/amd/amdk8/raminit_f.c"
-
#include "lib/generic_sdram.c"
-
-#include "resourcemap.c"
-
+#include "resourcemap.c"
#include "cpu/amd/dualcore/dualcore.c"
-
-#define MCP55_NUM 1
-#define MCP55_USE_NIC 1
-#define MCP55_USE_AZA 1
-
-#define MCP55_PCI_E_X_0 4
-
#include "southbridge/nvidia/mcp55/mcp55_early_setup_ss.h"
#include "southbridge/nvidia/mcp55/mcp55_early_setup_car.c"
-
-#include "cpu/amd/car/copy_and_run.c"
-
#include "cpu/amd/car/post_cache_as_ram.c"
-
#include "cpu/amd/model_fxx/init_cpus.c"
-
#include "cpu/amd/model_fxx/fidvid.c"
-
-#include "southbridge/nvidia/mcp55/mcp55_enable_rom.c"
#include "northbridge/amd/amdk8/early_ht.c"
static void sio_setup(void)
{
-
- unsigned value;
uint32_t dword;
uint8_t byte;
+
enable_smbus();
// smbusx_write_byte(1, (0x58>>1), 0, 0x80); /* select bank0 */
smbusx_write_byte(1, (0x58>>1), 0xb1, 0xff); /* set FAN ctrl to DC mode */
byte = pci_read_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b);
- byte |= 0x20;
+ byte |= 0x20;
pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b, byte);
-
+
dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0);
dword |= (1<<0);
pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0, dword);
-
+
dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4);
dword |= (1<<16);
pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4, dword);
-
}
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
static const uint16_t spd_addr [] = {
- (0xa<<3)|0, (0xa<<3)|2, 0, 0,
- (0xa<<3)|1, (0xa<<3)|3, 0, 0,
-#if CONFIG_MAX_PHYSICAL_CPUS > 1
- (0xa<<3)|4, (0xa<<3)|6, 0, 0,
- (0xa<<3)|5, (0xa<<3)|7, 0, 0,
-#endif
+ // Node 0
+ DIMM0, DIMM2, 0, 0,
+ DIMM1, DIMM3, 0, 0,
+ // Node 1
+ DIMM4, DIMM6, 0, 0,
+ DIMM5, DIMM7, 0, 0,
};
- struct sys_info *sysinfo = (CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
-
+ struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE
+ + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
int needs_reset = 0;
unsigned bsp_apicid = 0;
if (!cpu_init_detectedx && boot_cpu()) {
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
-
enumerate_ht_chain();
-
sio_setup();
-
- /* Setup the mcp55 */
- mcp55_enable_rom();
}
- if (bist == 0) {
+ if (bist == 0)
bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
- }
- pnp_enter_ext_func_mode(SERIAL_DEV);
- pnp_write_config(SERIAL_DEV, 0x24, 0x84 | (1 << 6));
- w83627hf_enable_dev(SERIAL_DEV, CONFIG_TTYS0_BASE);
- pnp_exit_ext_func_mode(SERIAL_DEV);
+ w83627hf_set_clksel_48(DUMMY_DEV);
+ w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
uart_init();
console_init();
-
+
/* Halt if there was a built in self test failure */
report_bist_failure(bist);
/* it will set up chains and store link pair for optimization later */
ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn
-#if K8_SET_FIDVID == 1
-
+#if CONFIG_SET_FIDVID
{
msr_t msr;
msr=rdmsr(0xc0010042);
- print_debug("begin msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\n");
-
+ printk(BIOS_DEBUG, "begin msr fid, vid %08x, %08x\n", msr.hi, msr.lo);
}
-
enable_fid_change();
-
enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn);
-
init_fidvid_bsp(bsp_apicid);
-
// show final fid and vid
{
msr_t msr;
msr=rdmsr(0xc0010042);
- print_debug("end msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\n");
-
+ printk(BIOS_DEBUG, "end msr fid, vid %08x, %08x\n", msr.hi, msr.lo);
}
#endif
-#if 1
+ init_timer(); // Need to use TMICT to synconize FID/VID
+
needs_reset |= optimize_link_coherent_ht();
needs_reset |= optimize_link_incoherent_ht(sysinfo);
needs_reset |= mcp55_early_setup_x();
print_info("ht reset -\n");
soft_reset();
}
-#endif
+
allow_all_aps_stop(bsp_apicid);
//It's the time to set ctrl in sysinfo now;
// enable_smbus(); /* enable in sio_setup */
- memreset_setup();
-
- //do we need apci timer, tsc...., only debug need it for better output
/* all ap stopped? */
-// init_timer(); // Need to use TMICT to synconize FID/VID
sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo);
post_cache_as_ram(); // bsp swtich stack to ram and copy sysinfo ram now
-
}
-