* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-#define RAMINIT_SYSINFO 1
-
-#define K8_ALLOCATE_IO_RANGE 1
-
-#define QRANK_DIMM_SUPPORT 1
-
-#if CONFIG_LOGICAL_CPUS==1
-#define SET_NB_CFG_54 1
-#endif
-
-// used by init_cpus and fidvid
-#define SET_FIDVID 1
-//if we want to wait for core1 done before DQS training, set it to 0
-#define SET_FIDVID_CORE0_ONLY 1
-
#if CONFIG_K8_REV_F_SUPPORT == 1
#define K8_REV_F_SUPPORT_F0_F1_WORKAROUND 0
#endif
#include <device/pnp_def.h>
#include <arch/romcc_io.h>
#include <cpu/x86/lapic.h>
-#include "option_table.h"
-#include "pc80/mc146818rtc_early.c"
-
+#include <pc80/mc146818rtc.h>
#include <console/console.h>
-#include "lib/ramtest.c"
-
+#include <lib.h>
+#include <spd.h>
#include <cpu/amd/model_fxx_rev.h>
-
-// for enable the FAN
-#include "southbridge/nvidia/mcp55/mcp55_early_smbus.c"
+#include "southbridge/nvidia/mcp55/mcp55_early_smbus.c" // for enable the FAN
#include "northbridge/amd/amdk8/raminit.h"
#include "cpu/amd/model_fxx/apic_timer.c"
#include "lib/delay.c"
-
#include "cpu/x86/lapic/boot_cpu.c"
#include "northbridge/amd/amdk8/reset_test.c"
#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
#include "superio/winbond/w83627hf/w83627hf_early_init.c"
-
#include "cpu/x86/bist.h"
-
#include "northbridge/amd/amdk8/debug.c"
-
#include "cpu/x86/mtrr/earlymtrr.c"
-
#include "northbridge/amd/amdk8/setup_resource_map.c"
+#include "southbridge/nvidia/mcp55/mcp55_early_ctrl.c"
#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
+#define DUMMY_DEV PNP_DEV(0x2e, 0)
-#include "southbridge/nvidia/mcp55/mcp55_early_ctrl.c"
-
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
-}
+static void memreset(int controllers, const struct mem_controller *ctrl) { }
static inline void dump_smbus_registers(void)
{
#include "northbridge/amd/amdk8/coherent_ht.c"
#include "northbridge/amd/amdk8/raminit_f.c"
#include "lib/generic_sdram.c"
-
#include "resourcemap.c"
-
#include "cpu/amd/dualcore/dualcore.c"
-
-#define MCP55_NUM 1
-#define MCP55_USE_NIC 1
-#define MCP55_USE_AZA 1
-
-#define MCP55_PCI_E_X_0 4
-
#include "southbridge/nvidia/mcp55/mcp55_early_setup_ss.h"
#include "southbridge/nvidia/mcp55/mcp55_early_setup_car.c"
-
#include "cpu/amd/car/post_cache_as_ram.c"
-
#include "cpu/amd/model_fxx/init_cpus.c"
-
#include "cpu/amd/model_fxx/fidvid.c"
-
-#include "southbridge/nvidia/mcp55/mcp55_enable_rom.c"
#include "northbridge/amd/amdk8/early_ht.c"
static void sio_setup(void)
*/
static const uint16_t spd_addr[] = {
// Node 0
- RC0 | (0xa << 3) | 0, RC0 | (0xa << 3) | 2,
- RC0 | (0xa << 3) | 4, RC0 | (0xa << 3) | 6,
- RC0 | (0xa << 3) | 1, RC0 | (0xa << 3) | 3,
- RC0 | (0xa << 3) | 5, RC0 | (0xa << 3) | 7,
+ RC0 | DIMM0, RC0 | DIMM2,
+ RC0 | DIMM4, RC0 | DIMM6,
+ RC0 | DIMM1, RC0 | DIMM3,
+ RC0 | DIMM5, RC0 | DIMM7,
// Node 1
- RC1 | (0xa << 3) | 0, RC1 | (0xa << 3) | 2,
- RC1 | (0xa << 3) | 4, RC1 | (0xa << 3) | 6,
- RC1 | (0xa << 3) | 1, RC1 | (0xa << 3) | 3,
- RC1 | (0xa << 3) | 5, RC1 | (0xa << 3) | 7,
+ RC1 | DIMM0, RC1 | DIMM2,
+ RC1 | DIMM4, RC1 | DIMM6,
+ RC1 | DIMM1, RC1 | DIMM3,
+ RC1 | DIMM5, RC1 | DIMM7,
};
struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE
+ CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
-
int needs_reset = 0;
unsigned bsp_apicid = 0;
if (!cpu_init_detectedx && boot_cpu()) {
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
-
enumerate_ht_chain();
-
sio_setup();
-
- /* Setup the mcp55 */
- mcp55_enable_rom();
}
- if (bist == 0) {
+ if (bist == 0)
bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
- }
- pnp_enter_ext_func_mode(SERIAL_DEV);
- pnp_write_config(SERIAL_DEV, 0x24, 0x84 | (1 << 6));
- w83627hf_enable_dev(SERIAL_DEV, CONFIG_TTYS0_BASE);
- pnp_exit_ext_func_mode(SERIAL_DEV);
+ w83627hf_set_clksel_48(DUMMY_DEV);
+ w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
uart_init();
console_init();
/* it will set up chains and store link pair for optimization later */
ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn
-#if SET_FIDVID == 1
-
+#if CONFIG_SET_FIDVID
{
msr_t msr;
msr = rdmsr(0xc0010042);
print_debug_hex32(msr.hi);
print_debug_hex32(msr.lo);
print_debug("\n");
-
}
-
enable_fid_change();
-
enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn);
-
init_fidvid_bsp(bsp_apicid);
-
// show final fid and vid
{
msr_t msr;
print_debug_hex32(msr.hi);
print_debug_hex32(msr.lo);
print_debug("\n");
-
}
#endif
sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo);
post_cache_as_ram(); // bsp swtich stack to ram and copy sysinfo ram now
-
}
-