Drop the USE_PRINTK_IN_CAR option. It's a bogus decision to make for any user /

[coreboot.git] / src / mainboard / msi / ms9185 / Kconfig

diff --git a/src/mainboard/msi/ms9185/Kconfig b/src/mainboard/msi/ms9185/Kconfig
index 3fb8763520b30e43928f5aab129e00b30cfc10ee..b80a03c632d827c7f5f0ae35a499f196f53ac522 100644 (file)
--- a/src/mainboard/msi/ms9185/Kconfig
+++ b/src/mainboard/msi/ms9185/Kconfig
@@ -1,21 +1,21 @@
 config BOARD_MSI_MS9185
-       bool "MS9185"
+       bool "MS-9185 (K9SD Master-S2R)"
        select ARCH_X86
-       select CPU_AMD_K8
        select CPU_AMD_SOCKET_F
        select NORTHBRIDGE_AMD_AMDK8
        select NORTHBRIDGE_AMD_AMDK8_ROOT_COMPLEX
        select SOUTHBRIDGE_BROADCOM_BCM5780
        select SOUTHBRIDGE_BROADCOM_BCM5785
        select SUPERIO_NSC_PC87417
+       select HAVE_BUS_CONFIG
+       select HAVE_OPTION_TABLE
        select HAVE_PIRQ_TABLE
        select HAVE_MP_TABLE
-       select USE_PRINTK_IN_CAR
        select USE_DCACHE_RAM
        select HAVE_HARD_RESET
-       select HAVE_ACPI_TABLES
-       select IOAPIC
+       select LIFT_BSP_APIC_ID
        select BOARD_ROMSIZE_KB_512
+       select SB_HT_CHAIN_UNITID_OFFSET_ONLY
 
 config MAINBOARD_DIR
        string
@@ -39,7 +39,7 @@ config DCACHE_RAM_GLOBAL_VAR_SIZE
 
 config APIC_ID_OFFSET
        hex
-       default 0x10
+       default 0x8
        depends on BOARD_MSI_MS9185
 
 config SB_HT_CHAIN_ON_BUS0
@@ -47,24 +47,9 @@ config SB_HT_CHAIN_ON_BUS0
        default 2
        depends on BOARD_MSI_MS9185
 
-config SB_HT_CHAIN_UNITID_OFFSET_ONLY
-       bool
-       default n
-       depends on BOARD_MSI_MS9185
-
-config LB_CKS_RANGE_END
-       int
-       default 122
-       depends on BOARD_MSI_MS9185
-
-config LB_CKS_LOC
-       int
-       default 123
-       depends on BOARD_MSI_MS9185
-
 config MAINBOARD_PART_NUMBER
        string
-       default "MS9185"
+       default "MS-9185"
        depends on BOARD_MSI_MS9185
 
 config HW_MEM_HOLE_SIZEK
@@ -84,25 +69,26 @@ config MAX_PHYSICAL_CPUS
 
 config HT_CHAIN_END_UNITID_BASE
        hex
-       default 0x0
+       default 0x1
        depends on BOARD_MSI_MS9185
 
 config HT_CHAIN_UNITID_BASE
        hex
-       default 0x0
+       default 0x6
        depends on BOARD_MSI_MS9185
 
-config USE_INIT
-       bool
-       default n
+config IRQ_SLOT_COUNT
+       int
+       default 11
        depends on BOARD_MSI_MS9185
 
-config SB_HT_CHAIN_ON_BUS0
-       int
-       default 2
+config MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
+       hex
+       default 0x1022
        depends on BOARD_MSI_MS9185
 
-config IRQ_SLOT_COUNT
-       int
-       default 11
+config MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
+       hex
+       default 0x2b80
        depends on BOARD_MSI_MS9185
+