if HAVE_PIRQ_TABLE object irq_tables.o end
#object reset.o
-##
-## Romcc output
-##
-makerule ./failover.E
- depends "$(MAINBOARD)/failover.c ./romcc"
- action "./romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-end
-makerule ./failover.inc
- depends "$(MAINBOARD)/failover.c ./romcc"
- action "./romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
+if USE_DCACHE_RAM
+ #compile cache_as_ram.c to auto.inc
+ makerule ./cache_as_ram_auto.inc
+ depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
+ action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@"
+ action "perl -e 's/.rodata/.rom.data/g' -pi $@"
+ action "perl -e 's/.text/.section .rom.text/g' -pi $@"
+ end
end
-makerule ./auto.E
- depends "$(MAINBOARD)/auto.c option_table.h ./romcc"
- action "./romcc -E -mcpu=p2 -O -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- depends "$(MAINBOARD)/auto.c option_table.h ./romcc"
- action "./romcc -mcpu=p2 -O -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-end
##
## Build our 16 bit and 32 bit linuxBIOS entry code
###
if USE_FALLBACK_IMAGE
ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
+# mainboardinit ./failover.inc
end
###
## Setup RAM
##
mainboardinit cpu/x86/fpu/enable_fpu.inc
-mainboardinit ./auto.inc
+
+if USE_DCACHE_RAM
+ mainboardinit cpu/amd/model_lx/cache_as_ram.inc
+ mainboardinit ./cache_as_ram_auto.inc
+end
##
## Include the secondary Configuration files
config chip.h
chip northbridge/amd/lx
- register "irqmap" = "0xcba5"
+ device pci_domain 0 on
+ device pci 1.0 on end # Northbridge
+ device pci 1.1 on end # Graphics
+ chip southbridge/amd/cs5536
+ # IRQ 12 and 1 unmasked, Keyboard and Mouse IRQs. OK
+ # SIRQ Mode = Active(Quiet) mode. Save power....
+ # Invert mask = IRQ 12 and 1 are active high. Keyboard and Mouse IRQs. OK
+ register "lpc_serirq_enable" = "0x00001002"
+ register "lpc_serirq_polarity" = "0x0000EFFD"
+ register "lpc_serirq_mode" = "1"
+ register "enable_gpio_int_route" = "0x0D0C0700"
+ register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash
+ register "enable_USBP4_device" = "0" #0: host, 1:device
+ register "enable_USBP4_overcurrent" = "0" #0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381)
+ register "com1_enable" = "0"
+ register "com1_address" = "0x2F8"
+ register "com1_irq" = "3"
+ register "com2_enable" = "1"
+ register "com2_address" = "0x3F8"
+ register "com2_irq" = "4"
+ register "unwanted_vpci[0]" = "0" # End of list has a zero
+ device pci b.0 on end # Slot 3
+ device pci c.0 on end # Slot 4
+ device pci d.0 on end # Slot 1
+ device pci e.0 on end # Slot 2
+ device pci f.0 on end # ISA Bridge
+ device pci f.2 on end # IDE Controller
+ device pci f.3 on end # Audio
+ device pci f.4 on end # OHCI
+ device pci f.5 on end # EHCI
+ end
+ end
+ # APIC cluster is late CPU init.
device apic_cluster 0 on
chip cpu/amd/model_lx
device apic 0 on end
end
end
- device pci_domain 0 on
-
- device pci 1.0 on end # Host Bridge
-
-# chip drivers/pci/realmode
-# device pci 1.1 on end # VGA
-# register "rom_address" = "0xfffc0000" # at the beginning of 256k
-# end
-
- device pci 1.2 off end # AES
- chip southbridge/amd/cs5536_lx
- register "enable_ide_nand_flash" = "0"
-
- register "isa_irq" = "0"
- #register "flash_irq" = "14"
-
- ## IDE IRQ
- register "enable_ide_irq" = "0"
-
- register "audio_irq" = "5"
- register "usb_irq" = "7"
-
- register "uart0_irq" = "0"
- register "uart1_irq" = "4"
-
- ## PCI INTA ... INTD and their GPIO pins
- ## int==0: disable
- register "pci_int[0]" = "0"
- register "pci_int[1]" = "10"
- register "pci_int[2]" = "0"
- register "pci_int[3]" = "0"
- register "pci_int_pin[0]" = "0"
- register "pci_int_pin[1]" = "7"
- register "pci_int_pin[2]" = "0"
- register "pci_int_pin[3]" = "0"
-
-
- # Keyboard Emulation Logic IRQs
- # Enable keyboard IRQ2
- register "enable_kel_keyb_irq" = "0"
- # Enable mouse IRQ12
- register "enable_kel_mouse_irq" = "0"
- # Configure KEL Emulation IRQ, 0 to disable
- register "kel_emul_irq" = "0"
-
- device pci f.0 on end # ISA Bridge
- device pci f.1 on end # Flash controller
- device pci f.2 off end # IDE controller
- device pci f.3 on end # Audio
- device pci f.4 on end # OHCI
- device pci f.5 on end # EHCI
- device pci f.6 off end # UDC controller
- device pci f.7 off end # OTG controller
- end
-# chip drivers/pci/rtl8139
-## device pci d.0 on end # Realtek LAN
-# register "nic_irq" = "10"
-# end
- end
+
end
projects / coreboot.git / blobdiff