#define SYSTEM_TYPE 1 /* DESKTOP */
//#define SYSTEM_TYPE 2 /* MOBILE */
-#define RAMINIT_SYSINFO 1
-#define CACHE_AS_RAM_ADDRESS_DEBUG 1
-
-#define SET_NB_CFG_54 1
-
-//used by raminit
-#define QRANK_DIMM_SUPPORT 1
-
//used by incoherent_ht
#define FAM10_SCAN_PCI_BUS 0
#define FAM10_ALLOCATE_IO_RANGE 0
-//used by init_cpus and fidvid
-#define SET_FIDVID 1
-#define SET_FIDVID_CORE_RANGE 0
-
#include <stdint.h>
#include <string.h>
#include <device/pci_def.h>
#include <arch/romcc_io.h>
#include <cpu/x86/lapic.h>
#include <console/console.h>
-#include "lib/ramtest.c"
#include <cpu/amd/model_10xxx_rev.h>
#include "northbridge/amd/amdfam10/raminit.h"
#include "northbridge/amd/amdfam10/amdfam10.h"
-
+#include <lib.h>
#include "cpu/x86/lapic/boot_cpu.c"
#include "northbridge/amd/amdfam10/reset_test.c"
-
#include <console/loglevel.h>
#include "cpu/x86/bist.h"
-
static int smbus_read_byte(u32 device, u32 address);
-
#include "superio/ite/it8718f/it8718f_early_serial.c"
-
-#if CONFIG_USBDEBUG
-#include "southbridge/amd/sb700/sb700_enable_usbdebug.c"
-#include "pc80/usbdebug_serial.c"
-#endif
-
+#include <usbdebug.h>
#include "cpu/x86/mtrr/earlymtrr.c"
#include <cpu/amd/mtrr.h>
#include "northbridge/amd/amdfam10/setup_resource_map.c"
-
#include "southbridge/amd/rs780/rs780_early_setup.c"
#include "southbridge/amd/sb700/sb700_early_setup.c"
#include "northbridge/amd/amdfam10/debug.c"
+#include <spd.h>
-static void activate_spd_rom(const struct mem_controller *ctrl)
-{
-}
+static void activate_spd_rom(const struct mem_controller *ctrl) { }
static int spd_read_byte(u32 device, u32 address)
{
- int result;
- result = smbus_read_byte(device, address);
- return result;
+ return smbus_read_byte(device, address);
}
#include "northbridge/amd/amdfam10/amdfam10.h"
-
#include "northbridge/amd/amdfam10/raminit_sysinfo_in_ram.c"
#include "northbridge/amd/amdfam10/amdfam10_pci.c"
-
#include "resourcemap.c"
#include "cpu/amd/quadcore/quadcore.c"
-
#include "cpu/amd/car/post_cache_as_ram.c"
#include "cpu/amd/microcode/microcode.c"
#include "cpu/amd/model_10xxx/update_microcode.c"
#include "cpu/amd/model_10xxx/init_cpus.c"
-
#include "northbridge/amd/amdfam10/early_ht.c"
#include "southbridge/amd/sb700/sb700_early_setup.c"
-//#include "spd_addr.h"
-
-#define RC00 0
-#define RC01 1
-
-#define DIMM0 0x50
-#define DIMM1 0x51
-#define DIMM2 0x52
-#define DIMM3 0x53
-
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
-
struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
static const u8 spd_addr[] = {RC00, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0, };
- u32 bsp_apicid = 0;
- u32 val;
+ u32 bsp_apicid = 0, val;
msr_t msr;
if (!cpu_init_detectedx && boot_cpu()) {
/* mov bsp to bus 0xff when > 8 nodes */
set_bsp_node_CHtExtNodeCfgEn();
enumerate_ht_chain();
-
sb700_pci_port80();
}
uart_init();
#if CONFIG_USBDEBUG
- sb700_enable_usbdebug(0);
+ sb700_enable_usbdebug(CONFIG_USBDEBUG_DEFAULT_PORT);
early_usbdebug_init();
#endif
rs780_early_setup();
sb700_early_setup();
- #if SET_FIDVID == 1
+ #if CONFIG_SET_FIDVID
msr = rdmsr(0xc0010071);
printk(BIOS_DEBUG, "\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x \n", msr.hi, msr.lo);
dump_pci_device_range(PCI_DEV(0, 0x18, 3), 0, 0x200);
*/
-// ram_check(0x00200000, 0x00200000 + (640 * 1024));
-// ram_check(0x40200000, 0x40200000 + (640 * 1024));
-
// die("After MCT init before CAR disabled.");
rs780_before_pci_init();
post_cache_as_ram(); // BSP switch stack to ram, copy then execute LB.
post_code(0x43); // Should never see this post code.
}
-